LGEAP_MCD112_ENG_MFL40387019
ENGLISH
MODEL : MCD112
MCD112B
MCD212
As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
There is so much your Hi-Fi system can do
|
Record from a CD, |
|
AUX, USB or radio |
|
to cassette |
Contents |
Go to page 8 |
|
|
Setting up |
3 |
About Player |
4 |
About Remote control |
5 |
Listening to CDs |
6 |
Connecting your portable USB player |
|
- OPTIONAL |
6 |
Listening to the radio |
7 |
Listen to cassette tapes |
7 |
Recording |
8 |
USER EQ |
8 |
Setting the Clock |
8 |
Use your player as an alarm clock |
9 |
About MP3/WMA |
9 |
Safety Precaution |
10 |
Troubleshooting |
11 |
Specifications |
11 |
Lull me to sleep and wake me up
Go to page 9
Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
Play CDs and
cassettes
Go to pages 6 & 7
2 MINI Hi-Fi SYSTEM ] USER GUIDE
Setting up
1 Connect the speaker cables to the player
Cables from the left-hand speaker connect to the terminal marked L (left) + (plus) and - (minus). Cables from the right-hand speaker are connected to the terminal marked R (right) + (plus) and - (minus).
To connect the cable to the player, press each of the four square plastic finger pads on the rear of the player. The connector will open ready to receive the cable.
2 Fit the AM loop aerial to its stand
Connect the AM loop aerial to the player.
ENGLISH
Put the batteries in the remote control
Make sure that the + (plus) and - (minus) on the batteries match those on the remote control.
3 Connect the FM aerial
The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.
4 Plug the power plug into a wall socket
MINI Hi-Fi SYSTEM ] USER GUIDE 3
About Player
POWER
You can set up the unit into an economic power save mode. In the power-on status, press and hold 1/] (POWER) for about 3 seconds. To cancel power save mode, press
1/] (POWER).
ST./MONO
Press ST./MONO. This will change the tuner from stereo to mono and usually improve the reception.
MP3 OPT. (MP3 Optimizer)
This function is optimized for compressible MP3 files so that it improves the bass sound.
DEMO
Press DEMO in power off state to demonstrate the functions on the display window. To cancel it, press 1/] or DEMO again.
Headphone jack
Connect a headphone plug (3.5 mm) into the jack to listen to the sound through headphones (not supplied).
CD tray
XTS - PRO
This function creates the optimum sound for you to play the original sound. Each time you press XTS - PRO, “XTS -- PRO ON” or “XTS
--PRO OFF” is displayed in turn. (The XTS
Pro function will not be operated when a headphone has been connected.)
D.SKIP
If more than one portable USB player is connected to the system at the same time, press D.SKIP to select one of them.
AUX
You can connect many other types of audio or audio visual device to the system via the auxiliary sockets (AUX IN) on the back of the player.
VOLUME
Control the volume when using any function.
USB connector - OPTIONAL
Connect a remote USB compatible player here.
4 MINI Hi-Fi SYSTEM ] USER GUIDE