LG GCC-4480B User Manual

0 (0)

BZ03

GCC-

4480

English Deutsch

Français Italiano Español

Português

CAUTION : The laser used in the CD-RW/DVD-ROM drive can damage your eyes.

Do not attempt to open the cover.

To reduce the risk of electric shock, do not remove cover (or back).

No user-serviceable parts inside.

Refer servicing to qualified service personnel.

Use of controls or performance of procedures other than those specified

herein may result in hazardous radiation exposure.

WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to

rain or moisture

Industry Canada requirement

This class B digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le

matériel brouilleur du Canada.

FCC COMPLIANCE STATEMENT

Note : This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

- Consult the dealer or an Authorized Service Center for help.

• FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

• This CD-RW/DVD-ROM Drive is for use only with UL listed personal computers that have

installation instructions detailing user-installation of card cage accessory.

English

This product is manufactured to comply with the radio interference requirements of

EEC DIRECTIVE 89/336/EEC, 93/68/EEC and 73/23/EEC.

CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM.

VARNING-OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD STRÄLEN ÄR

FARLIG.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

This unit uses CD-ROM discs with the following mark

When you use this unit as a CD player, use compact

discs with the following mark

This unit uses CD-R discs with the following mark.

This unit uses CD-RW discs with the following mark.

This unit uses High Speed CD-RW discs with the

following mark

This unit uses Ultra Speed CD-RW discs with the

following mark.

WARNING: Only CD-RW drivers bearing the logo Compact Disc ReWritable Ultra Speed can

write or erase Ultra Speed CD-RW media.

Ultra Speed CD-RW Media may be recognized by the same Compact Disc ReWritable Ultra

Speed logo on the disc label or packaging material.

Attempted writes to Ultra Speed CD-RW media using CD-RW drives NOT bearing the logo

Compact Disc ReWritable Ultra Speed may result in data loss.

Recordable

ReWritable

High Speed

ReWritable

Ultra Speed

DirectCD

v2.5b(s)

Introduction

Installation

Operation

Appendix

Contents

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

System Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Location and Function of Controls . . . . . . . . . . . . . . . . . . . 5

Installing the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Device Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

How to Use the Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

■ Microsoft

and Windows

are trademarks registered in the United

States and other countries by the Microsoft Corporation.

■ The company names and product names written in this manual are

trademarks or registered trademarks of the respective companies.

DirectCD

v2.5b(s)

Introduction

Thank you for

purchasing this

CD-RW/DVD-

ROM Drive.

Package Items

Features

• Enhanced-IDE (ATAPI) interface.

• Power tray loading and ejection of disc.

(The disc can also be ejected manually.)

• Combination CD-R/RW and DVD-ROM Drive functions into one drive.

• Supports UDF for easy writing to CD-RW discs.

• Supports Region playback control Phase II.

• Supports Windows 95, 98, 2000, ME & XP/NT4.0.

• Supports Mt. Rainier.

• Automatic buffer underrun error prevention technology-SuperLink

• 48X max Writing (CD-R), 24X max ReWriting (CD-RW),

16X max Reading (DVD-ROM), and 48X max Reading (CD-ROM)*.

* Writing speed depends on capabilities of discs.

As a result, for ultra speed write/rewrite, you should use media

labelled Ultra Speed Write/ReWritable discs

Item Quantity

- Internal CD-RW/DVD-ROM Drive 1

- CD Recording Software 1

- MPEG-2 Software(Power DVD) 1

- E-IDE (ATAPI) cable 1

- Audio Cable 1

- Mounting Screws 4

- Manual for CD-RW/DVD-ROM Drive 1

- Quick Manual for CD Recording Software 1

DirectCD

v2.5b(s)

Introduction

Precautions

Installation

Operation

Important Precautions

Follow these precautions when handling the drive or discs.

• Please take notice that the manufacturer of this equipment does not

offer any warranty against data loss due to inappropriate installation

or handling, or direct or indirect damages.

• Please take notice that the manufacturer will bear no responsibility

for direct or indirect damages caused by the use of this product or its

malfunction.

• Please take notice that the manufacturer will bear no responsibility for

damage to data caused by this product.

• Please backup (copy) all important data as protection against data

loss.

• Avoid placing the drive in a location subject to:

- high humidity

- high temperature

- excessive dust

- mechanical vibration

- direct sunlight

We recommend using the drive in a horizontal or vertical position.

Do not use it in tilted position.

• Don’t move the drive suddenly from a cold place to a warm one or

raise the room temperature suddenly. Condensation may occur,

causing abnormal operation.

• Make sure to remove the disc before moving the drive.The disc may

be damaged, causing data loss.

• Be careful to prevent foreign objects, such as liquids or metal, from

entering the drive. In case a foreign object enters the drive, please

consult the dealer where the drive was purchased.

• Don’t interrupt the electric power while the drive is operating.

• When connecting two IDE devices to the Primary or Secondary

connectors, make sure that the two devices are not configured as

both Master, or both Slave. If they are both set the same, Windows

may fail to run or recognize the drives.

• The total length of the IDE cable should be no more than 18 inches

(about 45 cm).

+ 12 hidden pages