LG D12YXA, D09YXA, D18YXA, E09NXA, S24ELA User manual

MODEL :

E05NXA S40 E09NXA S40

LG New Hybrid
MODEL :
E10CMV SW1 E13CMV SH1
E18CMV SC1
	Ultra Deluxe
OWNER’S MANUAL	MODEL :
	D05YXA SW2
AIR	D05ZXA SW2
	D07YXA SW2
	D07ZXA SW2
	D09YXA SH2
CONDITIONER	D18YXA SC2
	D09ZXA SH2

D12YXA SH2

Please read this manual carefully before

operating your set and retain it for future reference.

TYPE : WALL MOUNTED

<![if ! IE]>

<![endif]>INDONESIAG ENGLISH

*MFL68781201*

Rev : 02 (01T15)

www.lg.com

2 TIPS FOR SAVING ENERGY

<![if ! IE]>

<![endif]>ENGLISH

TIPs FOR SAVING ENERGY

Here are some tips that will help you to minimize the power consumption when you use the air conditioner. You can use your air conditioner more efficiently by referring to the instructions below :

•Do not cool the indoor excessively. This may be harmful for your health and may consume more electricity.

•Block sunlight with blinds or curtains while you are operating the air conditioner.

•Keep doors or windows closed tightly while you are operating the air conditioner.

•Adjust the direction of the air flow vertically or horizontally to circulate indoor air.

•Speed up the fan to cool or warm indoor air quickly, in a short period of time.

•Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

•Clean the air filter once every 2 weeks. Dust and impurities collected in the Air filter may block the air flow or weaken the cooling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

You can find them on a label on the side of each unit.

Dealer’s name :

Date of purchase :

IMPORTANT SAFETY INSTRUCTIONS

3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situation and ensure peak performance of you product.

!WARNING

It can result in serious injury or death when the directions are ignored.

!CAUTION

It can result in minor injury or product damage when the directions are ignored.

!WARNING

•Installation or repairs made by unqualified persons can result in hazards to you and others.

•Air conditioner shall be installed in accordance with national wiring regulations.

•The information contained in the manual is intended for use qualified service technician familiar with safety procedures and equipped with the proper tools and test instruments.

•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

•This appliance is not intend for use by persons (including children) with reduced physical, senary or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for theirs safety.

•Children should be supervised to ensure that they do not play with the appliance.

•When the power cord is to be replaced,replacement work shall be performed by authorized personnel only genuine replacement parts.

Installation

•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

•Always use a power plug and socket with a ground terminal. Failure to do so may result in electric shock or product failure.

•Installthepanel andthecoverofthecontrolboxsafely.Failure todosomayresult inexplosion orfire.

•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

•Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled off or deteriorated then it must be replaced. It may result in fire or electric shock.

•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

•Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

<![if ! IE]>

<![endif]>ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

<![if ! IE]>

<![endif]>ENGLISH

Operation

•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Failure to do so may result in fire, electric shock, or product failure.

•Do not place any objects on the power cord. It may result in electric shock or product failure.

•Do not turn on or off the air conditioner by plugging in or unplugging the power plug. It may result in fire or electric shock.

•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

•Do not place a heater or other heating appliances near the power cable. It may result in fire, electric shock, or product failure.

•Do not allow water to run into the air conditioner. It may result in explosion or fire.

•Do not leave flammable substances such as gasoline, benzene and thinner near the air conditioner. It may result in explosion or fire.

•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in explosion or fire.

•When there is a gas leak, ventilate sufficiently before using the air conditioner again. Failure to do so may result in explosion or fire.

•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to do so may result in explosion or fire.

•Stop operating and close the window in storm or hurricane. If possible remove the product from the window before hurricane arrives.

•Do not touch the electrostatic filter after opening the front grille. Failure to do so may result in electric shock or product failure.

•Contact an authorized service center when the air conditioner is submerged into water due to flooding. Failure to do so may result in explosion or fire.

•Be cautious water could not enter the product.

•Make sure to ventilate sufficiently when this air conditioner and a heating appliance such as a heater are used simultaneously. Failure to do so may result in explosion or fire, serious injury, or product failure.

•Turn the main power off and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

•For inner cleaning, contact an Authorized Service Center or a dealer.

•Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or electric shock.

IMPORTANT SAFETY INSTRUCTIONS

5

! CAUTION	<![if ! IE]> <![endif]>ENGLISH
Failure to do so may result in product failure.
Installation
• Make sure to check if there is a refrigerant leak after you install or repair the air conditioner.
• Install the drain hose properly for smooth drainage of condensed water. Failure to do so may
result in product failure.
• Keep level even when installing the product.
• Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not
inconvenience the neighbors. Failure to do so may result in conflict between neighbors.
• When transporting the equipment, there should be at least 2 or more people, or a forklift. It
may result in serious injury.
• Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may
result in product failure.
• Do not turn on the breaker or power under condition that front panel, cabinet, top cover, control
box cover are removed or opened. Otherwise, it may cause fire, electric shock, explosion or death.
Operation
• Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may
result in serious injury.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is
a consumer air conditioner, not a precision refrigeration system. It may result in death, fire or
electric shock.
• Do not block the inlet or outlet of air flow. It may result in explosion or product failure.
• Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water.
Use a smooth cloth. It may result in serious injury or product failure.
• Never touch the metal parts of the air conditioner when you remove the air filter. It may result
serious injury or product failure.
• Do not place any objects on the air conditioner. It may result in product failure.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often
if necessary.
• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is
operating. It may result in electric shock.
• Do not drink the water drained from the air conditioner.It may result in serious health complications.
• Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height.
Failure to do so may result in serious injury or product failure.
• Do not mix the batteries for the remote control with other types of batteries or mix new batteries
with used batteries. Failure to do so may result in product failure.
• Do not recharge or disassemble the batteries. Failure to do so may result in explosion, fire or
serious injury.
• Stop using the remote control if there is a battery fluid leak.If your cloth or skin is explosion to the
battery fluid from a leak, wash it off with clean water. Failure to do so may result in serious injury.
• If you swallow the battery fluid from a leak. Wash out the inside of your mouth thoroughly and
then consult a doctor. Failure to do so may result in serious health complications.

6 CONTENTS

<![if ! IE]>

<![endif]>ENGLISH

Contents

2TIPs FOR SAVING ENERGY

3IMPORTANT SAFETY INSTRUCTIONS

7	BEFORE USE
7	Components
7	- Indoor unit Type 1

7- Indoor unit Type 2

8- Indoor unit TYPE 3

8	- OUTdoor unit

9Inserting batteries

9Installing the remote control holder

9Operating method

10USING THE REMOTE CONTROL

10REmote control type 1 : SKIN CARE, H'COOL, 1 TOUCH SOFT AIR and air flow direction 2 way

11REmote control type 2 : active energy control, skin CAre , 1 touch soft air and air flow direction 4 way

12REmote control type 3 : active energy control, 1 touch soft air and air flow direction 2 way

13REmote control type 4 : H'cool and air flow direction 2 way

14REmote control type 5 : 1 TOUCH SOFT AIR and air flow direction 2 way

15BASIC FUNCTIONS

15Cooling your room (Cooling operation)

15Removing humidity (Dehumidifying operation)

15Airing your rooM (Air Circulation operation)

16Adjusting the fan speed

16	Adjusting the air flow direction
16	Setting the timer
16	- Setting the current time

16- Turning on the air conditioner automatically at a set time

17- Turning off the air conditioner automatically at a set time

17	- CanceLing the timer setting
17	Setting sleep mode

17 Advanced FUNCTIONS

17Changing room temperature quickly

(JET COOL) (OPTIONAL)

18Changing room temperature quickly

H’Cool (Himalaya) mode (OPTIONAL)

18Indoor air purification (Auto Clean operation)

18Plasma Purification operation (OPTIONAL)

19Skin Care operation (OPTIONAL)

19Display screen brightness

19Auto operation (Artificial intelligence)

20Energy saving cooling mode (OPTIONAL)

201 TOUCH SOFT AIR OPERATION (Comfort Vane operation) (OPTIONAL)

21Active energy control operation (OPTIONAL)

23Operating the air conditioner without the remote control

23Restarting the air conditioner automatically

23- Disabling auto restart

24MAINTENANCE

24	- Indoor unit TYPE 1
24	- Indoor unit TYPE 2
24	- Indoor unit TYPE 3
26	Cleaning the air filter

26Cleaning Allergy free filter and Triple filter (optional)

27Cleaning 3M filter (optional)

27Cleaning Plasma filter (optional)

28TROUBLESHOOTING

28 Self-diagnosis function

28 Before requesting service

BEFORE USE

7

BEFORE USE

Components		3M filter (Optional)	Air Inlet
		Plasma filter (Optional)
Indoor unit	Front cover	Air filter	On/off button
Type 1
3M filter (Optional)
Triple filter (Optional)			Ionizer (Optional)
			Signal Receiver
Ionizer (Optional)		Display screen
	Air outlet	Vertical louver
		Horizontal vane

*The feature can be changed according a type of model.

	Indoor unit		3M filter (Optional)
	Type 2
			Plasma filter (Optional)
			Air filter	Air Inlet
				On/off button
		3M filter(Optional)		Ionizer(Optional)
	Front cover
				Signal Receiver
	3M filter (Optional)			Operation lamp
	Triple filter (Optional)
	Air outlet		Vertical louver	Allergy free filter (Optional)
			Horizontal vane

<![if ! IE]>

<![endif]>ENGLISH

*The feature can be changed according a type of model.

8 BEFORE USE

<![if ! IE]>

<![endif]>ENGLISH

Indoor unit			Air inlet
TYPE 3	Front cover		Air filter

3M filter (Optional)	On/Off button
Triple filter (Optional)
Air outlet	Signal receiver
	LED display
Vertical louver	Horizontal vane

!NOTE

•The number of operation lamps and their locations may vary, depending on the model of the air conditioner.

OUTdoor unit

Air inlet

Air outlet

Base Plate

*The feature can be changed according a type of model.

Connecting wires

Piping

Drain hose

Rev : 02 (01T15)

BEFORE USE

9

Inserting batteries

Insert batteries before using the remote control. The battery type used is AAA (1.5 V).

1. Remove the battery cover.

2.Insert the new batteries and make sure that the

(+) and (-) terminals of the batteries are installed correctly.

3. Reattach the battery cover.

!NOTE

•If the display screen of the remote control starts to fade, replace the batteries.

Installing the remote control holder

2. Fix the holder by fastening the 2 screws firmly with a screwdriver.

3. Slide the remote control into the holder.

Operating method

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

<![if ! IE]>

<![endif]>ENGLISH

Install the holder where there is no direct sunlight to protect the remote control.

1. Choose a safe and easily-accessible place.

*The feature can be changed according a type of model.

!NOTE

•Theremotecontrolmayoperateotherelectronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

•For proper operation, use a soft cloth to clean the signal transmitter and receiver.

10 USING THE REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

USING THE REMOTE CONTROL

You can operate the air conditioner more conveniently with the remote control.

REmote control type 1 : SKIN CARE, H'COOL, 1 TOUCH SOFT AIR and air flow direction 2 way

Wireless remote control

Display screen

Control panel

Control	Display	Description
panel	screen
		Plasma button : Purifies the air by removing
		particles that enter the indoor unit.
		Energy saving button : Operates energy saving
		cooling.
	-	Skin Care button : keeps skin moisturized.
	-	On/Off button : Turn the power On/Off.
	C	Temperature adjustment buttons : Adjust the
		room temperature when cooling.
		Operation mode selection button : Select the
		operation mode.
		Cooling operation ( ) / Auto operation (		)
		Dehumidifying operation (	) /
		Air circulation operation (	)
		H’Cool button : Cools down the indoor temperature
		within a short period of time.

Indoor fan speed button : Adjust the fan speed.

Air flow direction button : Adjust the air flow direction vertically.

	-	Light button : Adjusts the brightness of the
		indoor unit display.
	or	1 Touch soft air button : To prevent air flow
		directly to person.
		Sleep mode auto button : Sets the sleep mode
		hr auto operation.

Timer button : Sets the current time and the start / end time.

Auto clean button : Remove moisture and clean inside of the indoor unit when turn off the power. (Press the button for 3 sec to use 2nd key)

Temperature display button : Displays the room temperature.

- Set/clear button : Sets or cancels functions.

-	Reset button : Initialize the air conditioner settings.

USING THE REMOTE CONTROL

11

REmote control type 2 : active energy control, skin CAre , 1 touch soft air and air flow direction 4 way

Wireless remote control

Display screen

Control panel

Control	Display		Description
panel	screen
		Plasma button : Purifies the air by removing
		particles that enter the indoor unit.
	-	Skin Care button : keeps skin moisturized.
		Active energy control button : Select Active energy
		control Option	/ /
	-	On/Off button : Turn the power On/Off.
	C	Temperature adjustment buttons : Adjust the
		room temperature when cooling.

Operation mode selection button : Select the operation mode.

Cooling operation () / Auto operation ( ) Dehumidifying operation () /

Air circulation operation ( )

Jet cool button : Cools down the indoor temperature within a short period of time.

Indoor fan speed button : Adjust the fan speed.

Air flow direction button : Adjust the air flow direction vertically or horizontally.

or		1 Touch soft air button : To prevent air flow
		directly to person.
	hr	Sleep mode auto button : Sets the sleep mode
		auto operation.
-		Light button : Adjusts the brightness of the
		indoor unit display.

Timer button : Sets the current time and the start / end time.

Auto clean button : Remove moisture and clean inside of the indoor unit when turn off the power. (Press the button for 3 sec to use 2nd key)

Temperature display button : Displays the room temperature.

- Set/clear button : Sets or cancels functions.

-	Reset button : Initialize the air conditioner settings.

<![if ! IE]>

<![endif]>ENGLISH

12 USING THE REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

REmote control type 3 : active energy control, 1 touch soft air and air flow direction 2 way

Wireless remote control

Display screen

Control panel

Control	Display				Description
panel	screen
				Air circulation button : Used to circulate the
				room air without cooling.
				Active energy control button : Select Active energy
				control Option	/	/
				Auto clean button : Remove moisture and clean
				inside of the indoor unit when turn off the power.
	-			On/Off button : Turn the power On/Off.
			C	Temperature adjustment buttons : Adjust the
				room temperature when cooling.
				Operation mode selection button : Select the
				operation mode.
				Cooling operation (		) / Auto operation (		)
				Dehumidifying operation ( )
				Jet cool button : Cools down the indoor temperature
				within a short period of time.
				Indoor fan speed button : Adjust the fan speed.

Air flow direction button : Adjust the air flow direction vertically.

-				Light button : Adjusts the brightness of the
				indoor unit display.
		or		1 Touch soft air button : To prevent air flow
				directly to person.
			hr	Sleep mode auto button : Sets the sleep mode
				auto operation.
				Timer button : Sets the current time and the
				start / end time.
				Temperature display button : Displays the room
				temperature.
		-		Set/clear button : Sets or cancels functions.
-				Reset button : Initialize the air conditioner settings.

USING THE REMOTE CONTROL

13

REmote control type 4 : H'cool and air flow direction 2 way Wireless remote control

	Control	Display	Description
	panel	screen
			Air circulation button : Used to circulate the
			room air without cooling.
			Energy saving button : Operates energy saving
			cooling.
			Auto clean button : Remove moisture and clean
			inside of the indoor unit when turn off the power.
		-	On/Off button : Turn the power On/Off.
	Display	C	Temperature adjustment buttons : Adjust the
	screen
			room temperature when cooling.
			Operation mode selection button : Select the
			operation mode.
			Cooling operation ( ) / Auto operation (	)
			Dehumidifying operation ( )
			H’Cool button : Cools down the indoor temperature
	Control		within a short period of time.
			Indoor fan speed button : Adjust the fan speed.
	panel
			Air flow direction button : Adjust the air flow
			direction vertically.
		-	Light button : Adjusts the brightness of the
			indoor unit display.
			Temperature display button : Displays the room
			temperature.
		hr	Sleep mode auto button : Sets the sleep mode
			auto operation.
			Timer button : Sets the current time and the
			start / end time.
		-	Set/clear button : Sets or cancels functions.
		-	Reset button : Initialize the air conditioner settings.

<![if ! IE]>

<![endif]>ENGLISH

14 USING THE REMOTE CONTROL

<![if ! IE]>

<![endif]>ENGLISH

REmote control type 5 : 1 TOUCH SOFT AIR and air flow direction 2 way Wireless remote control

Control

Display

Description

panel

screen

Air circulation button : Used to circulate the

room air without cooling.

Energy saving button : Operates energy saving

cooling.

Auto clean button : Remove moisture and clean

inside of the indoor unit when turn off the power.

-

On/Off button : Turn the power On/Off.

Display

C

Temperature adjustment buttons : Adjust the

screen

room temperature when cooling.

Operation mode selection button : Select the

operation mode.

Cooling operation ( ) / Auto operation (

)

Dehumidifying operation ( )

Jet cool button : Cools down the indoor temperature

Control

within a short period of time.

panel

Indoor fan speed button : Adjust the fan speed.

Air flow direction button : Adjust the air flow

direction vertically.

-

Light button : Adjusts the brightness of the

indoor unit display.

or

1 Touch soft air button : To prevent air flow

directly to person.

hr

Sleep mode auto button : Sets the sleep mode

auto operation.

Timer button : Sets the current time and the

start / end time.

Temperature display button : Displays the room

temperature.

-

Set/clear button : Sets or cancels functions.

-

Reset button : Initialize the air conditioner settings.

Rev : 02 (01T15)

BASIC FUNCTIONS

15

BASIC FUNCTIONS

Cooling your room (Cooling operation)

1. Press		to turn on the power.	For remote control type 4
2. Press		repeatedly to select the cooling
operation.
-	is displayed on the display screen.

<![if ! IE]>

<![endif]>ENGLISH

3. Press or to set the desired temperature.

For remote control type 1,4,5

-The temperature range is 18°C-30°C.

For remote control type 2,3

-The temperature range is 16°C-30°C.

Removing humidity (Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1.Press to turn on the power.

2.Press repeatedly to select the dehumidifying operation.

- or is displayed on the display screen.

For remote control type 1,2,3,5

!NOTE

•In this mode you cannot adjust the room temperature, as it is adjusted automatically. Also, the room temperature is not displayed on the display screen.

Airing your rooM (Air

Circulation operation)

1.Press to turn on the power.

2.Fan button : Press turn on the air cuiculation operation. (For remote control type 3,4,5)

Mode button : Press repeatedly to select the air circulation operation. (For remote control type 1,2)

- is displayed on the display screen.

3. Press to adjust the fan speed.

Rev : 02 (01T15)

16 BASIC FUNCTIONS

<![if ! IE]> <![endif]>ENGLISH	Adjusting the fan speed
	For remote control type 1,4,5
	1. Press			repeatedly to adjust the fan speed.
				Remark		Speed
						High
						Medium
						Low
						Natural wind
	For remote control type 2,3
				Remark		Speed
						High
						Medium High
						Medium
						Medium Low
						Low
						Natural wind

Adjusting the air flow direction

1. To adjust the direction of the air flow vertically, press change the air flow direction automatically.

2. To adjust the direction of the air flow horizontally, press change the air flow direction automatically.

!NOTE

•Adjusting the air flow direction horizontally may not be supported, depending on the model.

•Adjusting the air deflector arbitrarily may cause product failure.

•If you restart the air conditioner, it starts to operate with the previously set direction of air flow, so the air deflector may not match the icon displayed on the remote control. When this oc-

curs, press	or	to adjust the direction
of the air flow again.

Setting the timer

You can use the timer function to save energy and to use the air conditioner more efficiently.

Setting the current time

1.Press and hold it for longer than 3 seconds.

- The AM/PM icon flickers at the bottom of the display screen.

2.Pressorto select the minutes.

3.Press to finish.

Turning on the air conditioner automatically at a set time

1. Press

- The icon below flickers at the bottom of the display screen.

			ADVANCED FUNCTIONS	17
3. Press	to finish.	Advanced
2. Press	or to select the minutes.	FUNCTIONS
icon are displayed on the display screen indicat-
4. When setting the timer, current time and ON
ing that the desired time is set.		The air conditioner offers some additional advanced
		functions.
Turning off the air conditioner
automatically at a set time		Changing room temperature
1. Press		quickly (JET COOL) (OPTIONAL)
- The icon below flickers at the bottom of the		1. Press	to turn on the power.
display screen.
		2. Press	(For remote control type 2,3,5)

- is displayed on the display screen.

2. Pressorto select the minutes. 3. Press to finish.

4. When setting the timer, current time and OFF icon are displayed on the display screen indicating that the desired time is set.

CanceLing the timer setting

1. Press to cancel all timer setting.

Setting sleep mode

Use the sleep mode to turn off the air conditioner automatically when you go to sleep.

1.Press to turn on the power.

2.Press

3. Press		or	to select the hour (Up to
7 hours).
4. Press		to finish.
-	is displayed on the display screen.

- In jet cooling mode, strong air blows out at a temperature of 18°C for 30 minutes.

!NOTE

•Powerful Cooling enable in Cooling/ Fan / Dehumidifying/Artificial intelligent.

•This function may not be supported, depending on the model.

<![if ! IE]>

<![endif]>ENGLISH

!NOTE

•In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.

18 ADVANCED FUNCTIONS

<![if ! IE]>

<![endif]>ENGLISH

Changing room temperature quickly H’Cool (Himalaya) mode (OPTIONAL)

This mode allows you to cool indoor air quickly in summer.

1.Press to turn on the power.

2.Press (For remote control type 1,4)

- is displayed on the display screen.

- In H’COOL (Himalaya) mode, 30 minutes strong focused air blows out for faster cooling.

!NOTE

•In Air circulation, Auto or Auto changeover mode, this function cannot be used.

•During and after H’COOL mode swing function will be ON by default.

•To OFF swing function press respective swing key.

•This function may not be supported, depending on the model.

•This function does not have auto restart feature.

Indoor air purification (Auto Clean operation)

In the cooling and dehumidifying operations, moisture is generated inside the indoor unit. Use the auto cleaning function to remove such moisture.

1.Press and hold it for longer than 3 seconds. (For remote control type 1,2)

2.Press (For remote control type 3,4,5)

- is displayed on the display screen.

-If you turn off the power, the fan operates for

30 minutes and clean the inside of the indoor unit.

! NOTE

Some buttons cannot be used while the auto cleaning function is in operation.

Plasma Purification operation (OPTIONAL)

The plasma filter developed by LG removes microscopic contaminants from the intake air completely to supply clean and fresh air.

1.Press to turn on the power.

2.Press (For remote control type 1,2)

- is displayed on the display screen.

!NOTE

•You can use this function by pressing without turning the air conditioner on.

•The plasma lamp light up while plasma purification is in operation.