LG D05MX, D09RX-2 Manual book [id]

OWNER’S MANUAL

AIR CONDITIONER

Please read this manual carefully before operating your set and retain it for future reference.

TYPE : WALL MOUNTED

Ultra Deluxe

MODELS :
D05RX SW0	D05MX SW0	D07RX SW0
D07MX SW0	D09RX SW0	D09MX SW0

*MFL68301201*

P/NO : MFL68301201 www.lg.com

Rev : 00

Date : 03.2014

2	TIPS FOR SAVING ENERGY

TIPS FOR SAVING ENERGY

Here are some tips that will help you minimize the power consumption when you use the air

below:

•Do not cool excessively indoors. This may be harmful for your health and may consume more electricity.

•Block sunlight with blinds or curtains while you are operating the air conditioner.

•Keep doors or windows closed tightly while you are operating the air conditioner.

y to circulate indoor air.

•Speed up the fan to cool or warm indoor air quickly, in a short period of time.

•Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.

ling / dehumidifying functions.

For your records

Staple your receipt to this page in case you need it to prove the date of purchase or for warranty purposes. Write the model number and the serial number here:

Model number :

Serial number :

Dealer’s name :

Date of purchase :

SAFETY PRECAUTIONS	3

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product

! WARNING

It can result in serious injury or death when the directions are ignored

! CAUTION

It can result in minor injury or product damage when the directions are ignored

! WARNING

in hazards to you and others.

•Installation MUST conform with local building codes.

•The information contained in the manual is intended for use b

familiar with safety procedures and equipped with the proper tools and test instruments.

•Failure to carefully read and follow all instructions in this manual can result in equipment malfunction, property damage, personal injury and/or death.

•This appliance is not intend for use by persons (including children) with reduced physical,

Senory or mantal capabilities, or lack of experiance and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for

theis safety.

•Children should be supervised to ensure that they do not play with the appliance.

•When the power cord is to be replaced,replacement work shall be performed by authorized personnel only genuine replacement parts.

Installation

•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

•Always use a power plug and socket with a ground terminal.Failure to do so may result in electric shock or product failure

•Install the panel and the cover of the control box safely. Failure to do so may result in explo-

•Install a dedicated electric outlet and circuit breaker before you use the air conditioner. Failure to do so may result in electric shock or product failure.

•Use a standard circuit breaker and fuse conforming with the rating of the air conditioner. Failure to do so may result in electric shock or product failure.

•Do not modify or extend the power cable. If the power cable or cord has scratches or skin peeled o or deteriorated then it must be replaced. It may result in

•Be cautious when you unpack or install the air conditioner. Failure to do so may result in serious injury or product failure.

•Contact an authorized service center when you install or relocate the air conditioner. Failure to do so may result in serious injury or product failure.

•Do not install the air conditioner on an unstable surface or where there may be a danger of it falling. It may result in death, serious injury, or product failure.

4	SAFETY PRECAUTIONS

Operation

•Do not let the air conditioner run for a long time when the humidity is very high or when a door or window has been left open. Failure to do so may result in product failure.

•Make sure that the power cord is not pulled or damaged while the air conditioner is operating. Fail-

ure.

•Do not place any objects on the power cord. It may result in electric shock or product failure.

•Do not turn on or o the air conditioner by plugging in or unplugging the power plug. It may result in

•Do not touch, operate or repair the air conditioner with wet hands. It may result in electric shock or product failure.

•Do not place a heater or other heating appliances near the po shock, or product failure.

•Do not allow water to run into the air conditioner. It may re

d thinner near the air conditioner.

•Do not use the air conditioner for an extended period of time in a small place without ventilation. Ventilate the place regularly. Failure to do so may result in e

•When there is a gas leak, ventilate su ciently before using the air conditioner again. Failure to do so

•Unplug the power plug if there is a noise, smell or smoke coming from the air conditioner. Failure to

•Stop operating and close the window in strom or hurricane.If possible remove the product from the window before hurricane arrives

grille. Failure to do so may result in elec-

tric shock or product failure.

•Contact an authorized service center when the air conditioner

•Be cautious water could not enter the product

•Make sure to ventilate su ciently when this air conditioner and a heating appliance such as a heater

rious injury, or product failure.

•Turn the main power o and unplug the power plug when you clean or repair the air conditioner. Failure to do so may result in death, serious injury, or product failure.

•Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to do so may result in product failure.

•Do not place any objects on the air conditioner. It may result in product failure.

•For inner cleaning, contact an Authorized Service center or a dealer. Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also cause failure of product,

SAFETY PRECAUTIONS	5

! CAUTION

Installation

•Make sure to check if there is a refrigerant leak after you install or repair the air conditioner. Failure to do so may result in product failure.

•Install the drain hose properly for smooth drainage of condensed water. Failure to do so may result in product failure.

•Keep level even when installing the product.

•Install the air conditioner where the noise from the outdoor unit or the exhaust gas will not incon-

between neighbors.

•When transporting the equipment, there should be at least 2 or more people, or a forklift. It may result in serious injury.

•Do not install the air conditioner where it will be exposed to sea wind (salt spray) directly. It may result in product failure.

Operation

•Do not expose people, animals or plants to the cold or hot wind from the air conditioner. It may result in serious injury.

•Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a con-

sumer air conditioner, not a precision refrigeration system. It shock.

explosion or product failure.

•Do not use strong cleaning agents or solvents when you clean the air conditioner, or spray water. Use a smooth cloth. It may result in serious injury or product failure.

•Never touch the metal parts of the air conditioner when you r rious injury or product failure.

•Do not place any objects on the air conditioner. It may result in product failure.

ter every two weeks or more often if

necessary.

•Do not insert hands or other objects through the air inlet or outlet while the air conditioner is operating. It may result in electric shock.

•Do not drink the water drained from the air conditioner. It may result in serious health complications.

•Use a sturdy stool or ladder when you clean, maintain or repair the air conditioner at a height. Failure to do so may result in serious injury or product failure.

•Do not mix the batteries for the remote control with other types of batteries or mix new batteries with used batteries. Failure to do so may result in product failure.

•Do not recharge or disassemble the batteries. Failure to do s injury.

. If your cloth or skin is exposed to the

to do so may result in serious injury.

ide of your mouth thoroughly and then consult a doctor. Failure to do so may result in serious health complications.

6	TABLE OF CONTENTS

TABLE OF CONTENTS

	2	TIPS FOR SAVING ENERGY		12 ADVANCED FUNCTIONS
	3		12		Changing room temperature quickly
		IMPORTANT SAFETY	13
		INSTRUCTIONS	13		Auto clean operation
			13		Skin Care operation
	7	BEFORE USE	13
			13		Display screen brightness
	7	Components
			13		°C /°F Conversion
	8	Inserting batteries	14		Auto operation
	8	Installing the remote control holder		14 Energy saving cooling mode
	8	Operating method	15		Operating the air conditioner without the
	9				remote control
		USING THE REMOTE	15		Restarting the air conditioner
		CONTROL			automatically
				16 MAINTENANCE
	10	BASIC FUNCTIONS
					Cleaning the Air filter
				17 Cleaning the Triple filter(Optional)
	10	Cooling your room
	10	Removing humidity		17 Cleaning the 3M filter(Optional)
	10	Airing your room
	10	Adjusting the fan speed		18 TROUBLESHOOTING
	11	Adjusting the air flow direction
			18		Self-diagnosis function
	11	Setting the timer
	11	- Setting the current time	18		Before requesting service
	11	- Turning on the air conditioner
		automatically at a set time
	11	- T
		automatically at a set time

11- Canceling the timer setting

12Setting sleep mode

BEFORE USE	7

BEFORE USE

Components

Indoor unit

Front Grille

Air outlet

Horizontal vane

Vertical louver

* The feature can be changed according to type of model.

Air inlet

ON/OFF button

Ionizer (Optional)

Signal receiver Display screen

! NOTE

The number of operation lamps and their locations may vary, depending on the model of the air conditioner.

Outdoor unit

Air Inlet
	Connecting
	Wires
	Piping
Air Outlet
Base Plate	Drain Hose

* The feature can be changed according to type of model.

8	BEFORE USE

Inserting batteries

2 Fix the holder by fastening the 2 screws

Insert batteries before using the remote control. The battery type used is AAA (1.5 V).

1 Remove the battery cover.

3 Slide the remote control into the holder.

2Insert the new batteries and make sure that the + and - terminals of the batteries are installed correctly.

3 Reattach the battery cover.

! NOTE

If the display screen of the remote control starts to fade, replace the batteries.

Installing the remote control holder

Install the holder where there is no direct sunlight to protect the remote control.

1 Choose a safe and easily-accessible place.

Operating method

Point the remote control towards the signal receiver at the bottom of the air conditioner to operate it.

* The feature can be changed according to type of model.

!NOTE

•The remote control may operate other electronic devices if pointed towards them. Make sure to point the remote control towards the signal receiver of the air conditioner.

•For proper operation, use a soft cloth to clean the signal transmitter and receiver.

USING THE REMOTE CONTROL	9

Using the remote control

You can operate the air conditioner more conveniently with the

	Control	Display		Description
	panel	screen
Wireless remote control
			Plasma button* :
			moving particles that enter the indoor
			unit.
			Energy saving button : Operates
			energy saving cooling
		-	Skin Care button : keeps skin moisturized.
	Display		On/Off button:
	screen	-
			Temperature adjustment buttons:
			Adjusts the room temperature when
			cooling.
			Operation mode selection button* : Se-
			lects the operation mode.
			Cooling operation (		) /
			Auto operation (		) / Dehumidifying
	Control		operation (	) /Air circulation(		)
	panel		J et cooling button		: Cools down the
			indoor temperature within a short period
			of time.
			Indoor fan speed button: Adjusts the
			fan speed.
			Air flow direction button: Adjusts the air
				horizontally.
		-	Light button : Adjusts the brightness
			of the indoor unit display
A/CLEAN
			Temperature display button: Displays
			the room temperature and also changes
			unit from oC to oF if pressed for 5 seconds.
			S leep mode auto button : Sets the
		hr sleep mode auto operation.
			Timer button: Sets the current time and
			the start / end time.
			Auto clean button : Remove moisture
	A/CLEAN		and clean inside of the indoor unit when

	-	S et/clear button: Sets or cancels func-
		tions.
	-	R eset button: Initialize the air condi-
		tioner settings.

*Some functions may not be supported, depending on the model.

10 BASIC FUNCTIONS

BASIC FUNCTIONS

Cooling your room

(Cooling operation)

1Press to turn on the power.

2Press repeatedly to select the cooling operation.

-	is displayed on the display screen.

3Press or to set the desired temperature.

-The temperature range is 18°C (64°F) ~ 30°C (86°F).

Airing your room

(Air Circulation operation)

This mode only circulates the indoor air without changing the room temperature.

1Press to turn on the power.

2Press repeatedly to select the air circulation operation.

- is displayed on the display screen.

3 Press to adjust the fan speed.

Removing humidity

(Dehumidifying operation)

This mode removes excess moisture from an environment with high humidity or in the rainy season, in order to prevent mold from setting in. This mode adjusts the room temperature and the fan speed automatically to maintain the optimal level of humidity.

1Press to turn on the power.

2Press repeatedly to select the dehumidifying operation.

- is displayed on the display screen.

Adjusting the fan speed

1Press repeatedly to adjust the fan speed.

-Select if you want natural air. The fan speed adjusts automatically.

Remark

Speed

High

Medium

Low

Natural Wind

!NOTE

•In this mode you cannot adjust the desired temperature, as it is adjusted automatically. Also, the desired temperature is

not displayed on the display screen.

BASIC FUNCTIONS	11

Adjusting the air flow direction

zontally, press repeatedly and select the desired direction.

- Select to adjust the direction of the air

Turning on the air conditioner automatically at a set time

1 Press .

the display screen.

! NOTE

vertically may not be supported, depending on the model.

cause product failure.

•If you restart the air conditioner, it starts to operate with the previously set direc-

not match the icon displayed on the remote control. When this occurs, press

again.

2Press or to select the minutes.

3Press

4When setting the timer, current time and ON icon are displayed on the display screen indicating that the desired time is set.

T		to-
matically at a set time
1 Press		.

the display screen.

Setting the timer

You can use the timer function to save energy

				2	Press	or	to select the minutes.
				3	Press
Setting the current time				4	When setting the timer, current time and
1	Press	and hold it for longer than 3 sec-			OFF icon are displayed on the display
					screen indicating that the desired time is
	onds.
					set.
	the display screen.			Canceling the timer setting
				1	Press	.
					- To cancel all timer settings, press			.
2	Press	or	to select the minutes.
3	Press

12 ADVANCED FUNCTIONS

Setting sleep mode

tioner automatically when you go to sleep.

1Press to turn on the power.

2Press

3Press or to select the hour (up to 7 hours).

4Press

- is displayed on the display screen in sleep mode.

! NOTE

In the Cooling and Dehumidifying modes, the temperature increases by 1°C after 30 minutes and by a further 1°C after another 30 minutes for a more comfortable sleep. The temperature increases with up to 2°C from the preset temperature.

ADVANCED FUNCTIONS

vanced functions.

Changing room temperature quickly

This mode allows you to cool indoor air quickly in summer .

1Press to turn on the power.

2Press .

-In jet cooling mode, strong air blows out at a temperature of 18°C (64°F) for 30 minutes.

!NOTE

•Powerful Cooling

-C/O Model

Enable in Cooling/Dehumidifying/Fan/

•This function may not be supported, depending on the model.