LG 19EN33S, 24EN33S, 23EN33S, 19EN33SW, 22EN33S User Manual

...
0 (0)

ENGLISH

OWNER’S MANUAL

LED LCD MONITOR

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

19EN33S 22EN33S 19EN33SW 23EN33S 20EN33SS 24EN33S 20EN33S

www.lg.com

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ENGLISH

2 TABLE OF CONTENTS

CONTENTS

3

ASSEMBLING AND PREPAR-

24

SPECIFICATIONS

 

ING

 

 

 

 

 

3

Unpacking

24

19EN33S

4

Parts and buttons

25

19EN33SW

5

Setting up the Monitor set

26

20EN33SS

5

- Attaching the Stand Base

27

20EN33S

5

- Detaching the Stand Base

28

22EN33S

6

- Mounting on a table

29

23EN33S

6

- Using the cable holder

30

24EN33S

8

- Mounting on a wall

31

Preset Modes (Resolution)

 

 

32

Indicator

9

USING THE MONITOR SET

 

33

PROPER POSTURE

9

Connecting to a PC

 

33

Proper posture for using the Monitor set.

9

- D-SUB connection

11 CUSTOMIZING SETTINGS

12Customizing Settings

12- Menu Settings

13-Picture

14-Color

15-Display

16-Others

17MY KEY Setting

18FUNC. Setting

18-Picture Mode

19-SUPER ENERGY SAVING

20-DUAL DISPLAY

20-DUAL WEB

21-MY KEY Setting

22 TROUBLESHOOTING

ASSEMBLING AND PREPARING 3

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

ENGLISH

CD(Owner's Manual) /

D-SUB Cable

Card

 

 

 

or

Power Cord

AC-DC Adapter

AC-DC Adapter

( Depending on the country )

( Depending on the country )

Stand Body

Stand Base

CAUTION

yyDo not use any unapproved accessories to ensure the safety and product life span.

yyAny damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

4 ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

Power Indicator yyLighting On: Turned on yyLighting Off: Turned off

(Power Button)

Button (See p.11)

Connection panel (See p.9)

ASSEMBLING AND PREPARING 5

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

21 Attach the Stand Body to the monitor set.

2 Attach the Stand Base.

3 Tighten the screw to the right with a coin.

Detaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

21 Pull out the Stand Body and Stand Base from the monitor set.

2Turn the screw to the left with a coin.

3Pull out the Stand Base.

Stand Body

Stand Body

Stand Base

Stand Body

Stand Base

Stand Base

 

ENGLISH

LG 19EN33S, 24EN33S, 23EN33S, 19EN33SW, 22EN33S User Manual

ENGLISH

6 ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

3Press (Power) button on the bottom switch panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

2 Connect the AC-DC Adapter and Power Cord to a wall outlet.

Cable holder

or

 

 

ASSEMBLING AND PREPARING 7

WARNING

 

 

 

Using the Kensington security system

 

When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers.

Do

Do not hold this set like below picture.Monitor screen can detach from stand base and injure your body.

NOTE

+20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com.

Connect the Kensington security system cable between the Monitor set and a table.

NOTE

The Kensington security system is optional. You can obtain it from most electronics stores.

ENGLISH

Front

Rear

ENGLISH

8 ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1Please, Use the screw and wall mount interface in accordance with VESA Standards.

2If you use screw longer than standard, the monitor might be damaged internally.

3If you use improper screw, the product might be damaged and drop from mounted position. In

this case, LG Electronics is not responsible for it.

4VESA compatible.

5Please use VESA standard as below.

yy784.8 mm (30.9 inch) and under

*Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x

Length 10 mm

yy787.4 mm (31.0 inch) and above

*Please use VESA standard wall mount pad and screws.

Model

19EN33S 20EN33S

 

19EN33SW 22EN33S

 

20EN33SS 23EN33S

VESA (A x B)

75 x 75

Standard screw

M4

Number of screws

4

Model

24EN33S

VESA (A x B)

100 x 100

Standard screw

M4

Number of screws

4

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper

accessory are not covered by the warranty.

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

USING THE MONITOR SET 9

USING THE MONITOR SET

Connecting to a PC

yyYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

NOTE

yyWhen using a D-Sub signal input cable connector for Macintosh

yyMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

ENGLISH

ENGLISH

10 USING THE MONITOR SET

CAUTION

yyConnect the signal input cable

and tighten it by turning the screws clockwise.

yyDo not press the screen with your finger for a long time as this may

result in temporary distortion on the screen. yyAvoid displaying a fixed image on the

screen for a long period of time to prevent image burn. Use a screensaver if possible.

NOTE

yyIf you turn the Monitor set on while it is cold, the screen may flicker. This is normal.

yySome red, green, or blue spots may appear on the screen. This is normal.

Self Image Setting Function

Press the power button on the bottom panel to turn the power on. When monitor power is turned on, the "Self Image Setting" Function is executed automatically. (Only supported in Analog Mode)

NOTE

yy"Self Image Setting" Function.

This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.(Only supported in Analog Mode)

yy‘AUTO’ Function.

When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. (Only supported in Analog Mode)

Loading...
+ 24 hidden pages