Lenovo E40, 2248-0CE, 2248, 2248-0CN, 22P4585 User Manual

...
0 (0)

DANGER

To avoid shock hazard:

Do not remove the covers.

Do not operate this product unless the stand is attached.

Do not connect or disconnect this product during an electrical storm.

The power cord plug must be connected to a properly wired and grounded power outlet.

Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.

To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power

outlet should be easily accessible.

Handling:

Your colour monitor is heavy, so handle it with care. If heavier than 18 Kg, IBM recommends that the monitor is moved or lifted by two people.

DANGER

Pour éviter les risques d’électrocution :

Ne retirez pas les capots du moniteur.

N’utilisez pas ce produit si le socle n’est pas fixé.

Ne connectez, ni ne déconnectez ce produit pendant un orage.

Le câble d’alimentation doit être connecté à une prise électrique correctement mise à la terre et en bon état de marche.

Tout équipement auquel ce produit est relié doit être également connecté à une prise correctement mise à la terre et en bon état de marche.

Pour isoler le moniteur de la source d’alimentation électrique, vous devez le débrancher de la prise électrique.

Cette prise doit être facile d’accès

Manutention :

Votre moniteur couleurs est lourd et doit donc être manipulé avec soin. Si son poids dépasse 18 kg, IBM vous conseille de le déplacer ou de le porter à deux.

GEFAHRENHINWEIS

Um die Gefahr eines elektrischen Schlags zu vermeiden, folgendes beachten:

Unter keinen Umständen die Abdeckungen abnehmen.

Das Produkt nicht in Betrieb nehmen, wenn der Sockel nicht montiert ist.

Das Gerät nicht während eines Gewitters an eine Steckdose anschließen oder von ihr trennen.

Das Netzkabel ist an eine ordnungsgemäß verdrahtete und geerdete Steckdose anzuschließen.

Jedes Gerät, mit dem dieses Produkt verbunden wird, muß ebenfalls an eine ordnungsgemäß verdrahtete und geerdete Steckdose angeschlossen werden.

Um den Monitor von der Stromversorgung zu trennen, muß der Stecker aus der Steckdose gezogen werden. Die Steckdose sollte leicht zugänglich sein.

Handhabungshinweis:

Ihr Farbbildschirm ist schwer, gehen Sie vorsichtig damit um. Wenn er schwerer als 18 kg ist, empfiehlt IBM, daß der Bildschirm von zwei Personen getragen bzw. gehoben wird.

GEVAAR

Ga als volgt te werk om het gevaar van een elektrische schok te voorkomen:

Verwijder in geen enkel geval de kap.

Stel dit produkt alleen in werking als de voet is bevestigd.

Sluit dit apparaat niet aan op, of verbreek de aansluiting van dit apparaat niet van een contactdoos tijdens onweer.

Het netsnoer moet worden aangesloten op een geaarde contactdoos met correcte bedrading.

Ook alle apparatuur waarop dit produkt wordt aangesloten moet zijn aangesloten op een contactdoos met correcte bedrading.

Om het beeldscherm te ontkoppelen van de netvoeding, dient u de stekker uit de contactdoos te trekken. De

contactdoos dient goed toegankelijk te zijn.

Verplaatsing:

De kleurenmonitor is zwaar. Doe dus voorzichtig. Indien de monitor zwaarder is dan 18 kilo, raadt IBM aan de monitor door twee mensen te laten tillen.

PELIGRO

Para evitar riesgos de descargas eléctricas:

No retire bajo ningún concepto las cubiertas.

No maneje el monitor sin antes acoplar el soporte.

No conecte ni desconecte el equipo de una toma de alimentación durante una tormenta eléctrica.

El cable de alimentación debe estar conectado a un enchufe debidamente cableado y con toma de tierra.

Cualquier equipo al que se vaya a conectar este producto también debe estar conectado a tomas de alimentación cableadas y conectadas a tierra correctamente.

Para aislar el monitor del suministro eléctrico, debe retirar el enchufe de la toma de alimentación. Esta toma

deberá ser de fácil acceso.

Movimentazione del monitor:

Il monitor a colori è pesante, si consiglia quindi di maneggiarlo con attenzione. Se il monitor pesa oltre 18 kg, IBM raccomanda che il monitor venga mosso o sollevato da due persone.

PERICOLO

Per evitare il rischio di scariche elettriche:

Non rimuovere nessuna parte del telaio.

Non accendere il prodotto se il piedistallo non è stato montato.

Non collegare o scollegare il prodotto nel corso di un temporale.

La spina del cavo di alimentazione deve essere collegata ad una presa di corrente con messa a terra, installata in maniera appropriata.

Le apparecchiature a cui il prodotto viene attaccato devono essere collegate a prese di corrente con messa a terra, installate in maniera appropriata.

Per isolare il monitor dalla corrente elettrica, staccare la spina dalla presa di alimentazione, che deve essere

facilmente accessibile.

Manipulación:

El monitor de color es pesado, por lo que debe manipularlo con cuidado. Si pesa más de 18 kg, IBM recomienda moverlo con la ayuda de dos personas.

PERIGO

Para evitar o perigo de choques eléctricos:

Não retire as coberturas.

Não utilize este produto antes de montar a base.

Não ligue nem desligue este produto durante uma tempestade eléctrica.

O cabo de alimentação deve ser ligado a uma tomada eléctrica devidamente ligada à terra.

Qualquer equipamento ligado a este produto deve estar ligado a tomadas eléctricas devidamente ligadas à terra.

Para isolar o monitor da fonte de alimentação, retire a ficha do cabo de alimentação da tomada eléctrica. A

tomada eléctrica deve ser de fácil acesso.

Manuseio:

Seu monitor colorido é pesado, então manuseie-o com cuidado. Se o peso for superior a 18 (dezoito) Kg., a IBM recomenda que o monitor seja movido ou carregado por duas pessoas.

FARE

Sådan undgår du elektrisk stød:

Kabinettet må under ingen omstændigheder fjernes.

Undgå at anvende dette produkt, uden at vippe/drejefoden er monteret.

Undgå at tilslutte eller frakoble dette produkt i tordenvejr.

Netledningen skal være tilsluttet en korrekt jordet stikkontakt med korrekt ledningsføring.

Alt udstyr, som tilsluttes dette produkt, skal også være tilsluttet korrekt jordede stikkontakter med korrekt ledningsføring.

For at isolere skærmen fra strømforsyningen, skal stikket tages ud af stikkontakten. Stikkontakten bør være let

tilgængelig.

Håndtering:

Deres farveskærm er tung, så vær forsigtig, når De løfter den. Hvis skærmen vejer mere end 18 kg, anbefaler IBM, at den flyttes og løftes af to personer.

FARE

Slik unngår du fare for elektrisk støt:

Ikke ta av dekslene.

Ikke bruk produktet dersom sokkelen ikke er montert.

Ikke koble produktet til eller fra under tordenvær.

Pluggen på strømledningen må kobles til korrekt montert og jordet strømuttak.

Utstyr som dette produktet eventuelt blir koblet til, må også kobles til korrekt montert og jordet strømuttak.

For å isolere skjermen fra strømkilden må du ta ut pluggen fra strømuttaket. Strømuttaket bør være lett

tilgjengelig.

Käsittely:

Värinäyttö on painava, joten käsittele sitä varoen. Jos näyttö painaa enemmän kuin 18 kg, IBM suosittelee, että kaksi henkilöä siirtää tai nostaa sitä.

Varning - livsfara

För att undvika risk för elektriska stötar måste du tänka på följande:

Ta inte bort några skyddskåpor.

Använd inte den här produkten innan du har satt fast stativet.

Anslut inte produkten till ett eluttag under åskväder. Koppla inte heller ur produkten från ett eluttag under åskväder.

Strömkabeln måste anslutas till ett felfritt och jordat uttag.

All utrustning som den här produkten kopplas till måste också anslutas till felfria och jordade uttag.

För att bryta strömmen till bildskärmen måste du dra ut kontakten. Vägguttaget bör vara lätt att komma åt.

Hantering:

Hantera din färgmonitor med försiktighet, den är tung. Ni bör vara två personer för att lyfta och flytta monitorn om den är tyngre än 18 kg.

VAARA

Sähköiskun vaaran välttämiseksi:

Älä avaa laitteen kansia missään tilanteessa.

Älä käytä laitetta, ellei jalustaa ole kiinnitetty.

Älä kytke laitetta pistorasiaan tai irrota sitä pistorasiasta ukonilman aikana.

Virtajohto on kytkettävä asianmukaisesti johdotettuun ja maadoitettuun pistorasiaan.

Kaikki muutkin laitteet, joihin tämä tuote on liitetty, on kytkettävä asianmukaisesti johdotettuihin pistorasioihin.

Kun haluat erottaa näyttimen sähköverkosta, sinun pitää irrottaa sen verkkojohto pistorasiasta. Pistorasian

pitäisi olla mahdollisimman lähellä näytintä ja vaivattomasti käsillä.

Håndtering:

Fargeskjermen din er tung, og må håndteres med varsomhet. Hvis den veier mer enn 18 kilo, anbefaler IBM at skjermen flyttes eller løftes av to personer.

TEHLIKE

Elektrik çarpmasý tehlikesinden kaçýnmak için:

Kapaklarý çýkarmayýnýz.

Bu cihazý kaidesine takýlý durumda deðilken çalýþtýrmayýnýz.

Bu cihazý elektriksel fýrtýna sýrasýnda prize takmayýnýz veya prizden çýkarmayýnýz.

Elektrik kablosunun fiþi, elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ bir prize takýlmalýdýr.

Bu cihazýn baðlanacaðý diðer tüm cihazlar da elektrik ve toprak baðlantýlarý usulüne uygun olarak yapýlmýþ prize takýlmýþ olmalýdýr.

Monitörün elektrikle baðlantýsýný kesmek için fiþini prizden çekmeniz gereklidir. Priz, kolayca eriþilebilecek bir yerde olmalýdýr.

Kaldýrma

Renklý monitörünüz aðýr olduðu icin kaldýrýrken dikkatli olunuz. IBM‚ monitörün aðýrlýðýnýn 18 kilogramdan fazla olmasý halinde iki kiþi tarafýndan taþýnmasýný veya kaldýrýlmasýný tavsiye etmektedir.

OPREZ

Da biste izbjegli opasnost od strujnog udara:

Nemojte otvarati kucište uredaja.

Nemojte upotrebljavati ovaj uredaj dok ne postavite postolje.

Nemojte spajati i odspajati uredaj za vrijeme oluje.

Naponski kabel mora biti prikljucen u odgovarajuce uzemljenu uticnicu.

Bilo koja oprema na koju ce ovaj uredaj biti spojen takoder mora biti prikljucena u odgovarajuce uzemljenu uticnicu.

Da biste iskljucili uredaj iz struje, iskopcajte utikac iz uticnice. Uticnica treba biti lako dostupna.

Rukovanje:

Vaš monitor je te ak, zato rukujte njime pa ljivo. IBM preporuca da ovaj monitor podi u ili pomicu dvije osobe.

Lenovo E40, 2248-0CE, 2248, 2248-0CN, 22P4585 User Manual

¤°«±

º¥¬®¹§º¤ º°«± ²¥°®¬ ©£«

ž«¥¨ž ´š ²£«ž¦ ©£š

•›¦› «£«›ž ²Ÿ›£¡ ²¡š¦ š¦š œ°ž ´š ¦£¬®ž¦ ©£š

§£±²› ´®Ÿ« ´¬› ¦¨³¡ž ´³²¦ œ°ž ´š ±´ª¦ Ÿš ²›¡¦ ©£š

ž±²šž› •£Ÿ°¨ž £ª±´ £¦¨³¡ ¬±³¦ ¡Ÿ¥ž ¦›¥ ´š ²›¡¦ ³£

ž±²šž› •£Ÿ°¨ž £ª±´ £¦¨³¡ ¬±³¦ šŸž -š ²›Ÿ¡¨ ž£ž£ ž ²°Ÿ¨¦ ²›Ÿ¡¨³ ²£³¥¨

¬±³ž³ œŸš•¦ ³£ £¦¨³¡ž ¬±³ž¨ ¬±´ž ´š ±´ª¦ ³£ ¡Ÿ¥ž ²Ÿ±¨¨ œ°ž ´š ••Ÿ›¦ £•¥´Ÿ¦±› ³£œª ž£ž£ £¦¨³¡ž

¥®¥·®® ¢¶¤ º¸¡²¤

Ÿ²£›¬ž¦ ¯¦¨Ÿ¨ œ ± ¦¬ ž¦Ÿ¬ œ°ž ¦±³¨ §š ´Ÿ²£ž › Ÿ› ¦®¢¦ ³£ ©¥¦Ÿ •›¥ £ªŸ¬›°ž œ°ž §£³ªš £ª³ ´² ¬› Ÿ¨£²ž¦ Ÿš

First Edition (November 2000)

This publication could contain technical inaccuracies or typographical errors. Changes are made periodically to the information herein; these changes will be made in later editions. IBM may make improvements and/or changes in the product(s) and/or program(s) at any time.

It is possible that this publication may contain reference to, or information about, IBM products (machines and programs), programming, or services that are not announced in your country.

Requests for copies of this publication and for technical information about IBM products should be made to your IBM Authorized Dealer or IBM Retailer.

No part of this publication may be reproduced or distributed in any form or by any means without prior permission in writing from the International Business Machines Corporation.

© Copyright International Business Machines Corporation 2000. All rights reserved.

Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Notices

References in this publication to IBM products, programs, or services do not imply that IBM intends to make these available in all countries in which IBM operates. Any reference to an IBM product, program or service is not intended to state or imply that only IBM’s product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any of IBM’s intellectual property rights or other legally protectable rights may be used instead of the IBM product, program, or service. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by IBM, are the user’s responsibility.

IBM may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to these patents.

1

Trademarks

The following terms, used in this publication, are trademarks or service marks of the IBM Corporation in the United States, other countries, or both:

HelpCenter IBM

ENERGY STAR is a U.S. Govt. registered trademark.

Microsoft and Windows are trademarks of Microsoft Corporation in the United States, other countries, or both.

Other company, product, and service names may be trademarks or service marks of others.

2

Contents

 

Packing list -----------------------------------------------------

3

Precautions -----------------------------------------------------

4

Installation Instructions -------------------------------------

5

Swivel Base ---------------------------------------------------

5

Power cord --------------------------------------------------

6

Video cable --------------------------------------------------

6

Operating Instructions ---------------------------------------

7

General Instructions ---------------------------------------

7

How to adjust a setting ------------------------------------

8

Adjusting the picture --------------------------------------

9

Features ---------------------------------------------------------

10

Green monitor ----------------------------------------------

10

Plug and play -----------------------------------------------

11

Technical Support (FAQ) -----------------------------------

12

Appendix A – Specifications----------------------------------

14-15

Appendix B – Factory Preset Timing Table --------------

16

PACKING LIST

 

The product package should include the following items:

 

1.Monitor

2.Owner's manual

3.Power cord

4.Swivel base

5.Diskette

3

PRECAUTIONS

Workplace preparation

Positioning the monitor

Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 2 in. (50 mm) ventilation space around the monitor.

Height

The monitor should be positioned so that the top of the screen is slightly below your eye level when you sit at your workstation.

Orientation

Choose a position that gives the least reflection from lights and windows, usually at a right angle to any windows. Position the monitor directly in front of you so that you do not have to twist your body. Tilt the monitor to a comfortable viewing angle.

4

Working Practices

Rest

Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged use of computer workstations can be tiring.

Back

Sit back in the chair and use the back rest.

Hands

Use a light touch on the keyboard, keeping your hands and fingers relaxed. Allow a space in front of the keyboard to rest your wrists when not typing. Consider using a wristpad.

Eyesight

Working with monitors, in common with any prolonged close work, can be visually demanding. Look away from the screen periodically and have your eyesight checked regularly.

Screen settings

Set the screen brightness and contrast to a comfortable level. You might have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort.

INSTALLATION INSTRUCTIONS

Swivel Base

To attach the swivel base to the monitor, do the following:

Carefully turn the monitor on its side or upside down. (see figure 1)

Locate the cavities at the bottom front of the monitor.

Insert the pegs on the swivel base into these cavities. Push the swivel base forward until the swivel base locks in place.

To remove the swivel base, hold the bottom of the swivel base, and then

push it out.

Install

Remove

Figure 1 Installing and removing the Swivel Base

5

Power Source:

1.Make sure the power cord is the correct type that is required in your area.

2.This monitor has a universal power supply that allows operation in 100/120V ac or 220/240V ac voltage (No user adjustment is required)

3.Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin ac power outlet. The power cord can be connected to either a wall power outlet or the power outlet socket on your computer, depending on the type of power cord supplied with your monitor.

Power cord:

For safe operation, use the power cord supplied with the unit.

Video cable

Connecting the video cable: The monitor comes with a built-in video cable. Plug the signal cable's 15-pin connector into the computer's video port and tighten the two screws on the cable connector. (see figure 2)

Connecting the power cord: Plug the power cord into the monitor's ac power socket. Then plug the power cord into a grounded ac outlet or ULapproved power strip or the power output socket on your computer.

Caution: If the AC outlet is not grounded(only two holes), install the proper grounding adapter (not supplied).

Diskette: The Installation Diskette included with your monitor contains information that you might need for its use. Refer to the readme file on this diskette.

1

2

 

 

Figure 2

Connecting cables

 

 

 

 

 

1.

Power Cord

 

2.

Signal Cable

6

OPERATING INSTRUCTIONS

General Instructions

The power switch is located at front panel of the monitor. Press the power switch to turn the monitor on or off. The other controls are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences.

The power cord must be connected.

Connect the video cable from the monitor to the System/Video card.

To turn the monitor on, press the POWER switch to ON position. The power indicator will light up.

6

7

8

9

10

11

12

13

1

2

3

4

5

Figure 3 External Controls

External Controls

 

Switch:

 

Functions:

 

 

1.

Power On/Off Switch

6.

Contrast

11.

V-Center

2.

LED

7.

Brightness

12.

Pincushion

3.

Up Key

8.

H-Size

13.

Trapezoid

4.

Down Key

9.

H-Center

12+13.

Rotation

5.

Function Key

10.

V-Size

 

 

7

Notes

Do not install the monitor in a location near heat sources such as radiators or air ducts , or in a place subject to direct sunlight , or excessive dust or mechanical vibration or shock.

Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor.

To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.

How to adjust a setting

1.Press the ON/OFF button, the green LED lights and the power is ON. Press this ON/OFF button again, the green LED disappear and the power is OFF.

2.When press the “FUNC” key, the LED will flash to indicate the function has been selected.

3.When function has been selected, press to adjust picture image.

4.Press the “FUNC” key until the LEDs of pincushion and trapezoid flash simultaneously, then press Up or Down key to adjust the picture tilt to horizontal position.

8

Adjusting the picture

The description for function control LEDS

1.

 

 

 

 

 

 

 

 

CONTRAST

Adjust the picture contrast.

 

 

 

 

 

 

 

 

 

 

 

2.

 

 

 

 

 

 

 

 

BRIGHTNESS

Adjust the picture brightness.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

 

 

 

 

 

 

 

 

H-SIZE

Adjust the picture’s horizontal size.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.

 

 

 

 

 

 

 

 

H-CENTER

Adjust the horizontal position of the picture.

 

 

 

 

 

 

 

 

 

 

 

5.

 

 

 

 

 

 

 

 

V-SIZE

Adjust the picture’s vertical size.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6.

 

 

 

 

 

 

 

 

V-CENTER

Adjust the vertical position of the picture.

 

 

 

 

 

 

 

 

 

 

 

7.

 

 

 

 

 

 

 

 

PINCUSHION

Adjust the pincushion and barrel.

 

 

 

 

 

 

 

 

 

 

 

8.

 

 

 

 

 

 

 

 

TRAPEZOID

Adjust the picture’s trapezoid distortion.

 

 

 

 

 

 

 

 

 

 

 

9.

 

 

 

 

 

 

 

 

ROTATION

Adjust the picture tilt to horizontal position.

 

 

 

 

 

 

 

10.

+

 

 

 

RECALL

To recall original factory preset mode.

 

 

 

 

 

 

 

 

 

 

 

9

FEATURES

Green monitor

The monitor has a power saving function that conforms to the VESA DPMS standard. This feature will only work if your computer is a “green” computer. This feature will switch off your monitor to conserve energy, after a user-specified period of inactivity.

To activate this feature in Microsoft® Windows® 98:

In Windows® 98, this feature can be activated and customized under the screen saver setting of the display properties.

1.Using the right mouse button, click the desktop and then select Properties.

2.Click the Screen Saver tab. If your system supports a “green” computer, the Energy Saving Features of Monitor panel displays. If your system does not support a “green” computer, you will have to manually turn off the computer to save energy.

3.In the Energy Saving Features of Monitor panel, activate the Standby feature by placing a check in the Standby check box or activate the Shut off feature by placing a check in the Shut off check box.

4.You can specify the amount of inactive time before your monitor enters standby mode or shuts off.

The power-saving mode is indicated by the light-emitting diode (LED) on the front panel:

Mode

 

Signal

 

 

Power

 

 

Cable

H-Sync

V-Sync

Video

Indicator

Consumption

 

On*

Attached

Yes

 

Yes

Active

Green

75 W

Stand-by

Attached

No

 

Yes

Blank

Orange

15

W

Suspend

Attached

Yes

 

No

Blank

Orange

15

W

Off

Attached

No

 

No

Blank

Orange

8

W

10

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Power Management standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video input signal present. When there is no video input signa, this monitor, following a time-out period, will automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a "Screen Saver" feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

Plug and play

Plug & Play DDC1/2B Feature

This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B.

The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

11

TECHNICAL SUPPORT (FAQ)

Problem & Question

Possible Solution

Power LED is not on

*Verify that the power switch is in the ON

 

position

 

*Power cord must be connected

No Plug & Play

*Verify that the computer system is Plug &

 

Play compatible

 

*Verify that the video card is Plug & Play

 

compatible

 

*Verify that the D-15 plug pin of video

 

cable is bent

 

*Make sure the monitor device drivers are

 

installed

No picture

*Computer power switch must be in the

 

ON position

 

*Computer video card must be snugly

 

seated in its slot

 

*The signal cable must be completely

 

connected to the computer

 

*Check the color of the power LED

 

indicator. If it is orange, then the monitor

 

and the computer system are in power-

 

saving mode. You need to press your

 

keyboard or move the mouse to

 

reactivate the system.

Picture is fuzzy

*Adjust the Contrast and Brightness

 

Controls.

Picture bounces or a wave pattern

*Move electrical devices that might cause

is present in the picture

electrical interference.

Monitor is stuck in “Power Saving

*Make sure monitor’s video cable is

Mode”

properly connected to the computer.

 

*Inspect monitor’s video cable and make

 

sure none of the pins are bent.

 

*Make sure computer is operational by

 

hitting the CAPS LOCK key on the

 

keyboard while observing the CAPS

 

LOCK LED. The LED should either

 

turn ON or OFF after hitting the CAPS

 

LOCK key.

Missing one of the primary colors

*Inspect the monitor’s video cable and

(RED, GREEN, or BLUE)

make sure that none of the pins are bent.

12

Help and service information

This section contains information on how to obtain online and telephone technical support.

Online technical support

Online technical support is available during the life of your product. Online assistance can be obtained through the Personal Computing Support Web site and the IBM Automated Fax System.

Online technical support

IBM Personal Computing Support Web http://www.ibm.com/pc/support site

During the warranty period, assistance for replacement or exchange of defective components is available. In addition, if your IBM option is installed in an IBM computer, you might be entitled to service at your location. Your technical support representative can help you determine the best alternative.

Telephone technical support

Installation and configuration support through the HelpCenter will be withdrawn or made available for a fee, at IBM’s discretion, 90 days after the option has been withdrawn from marketing. Additional support offerings, including step-by-step installation assistance, are available for a nominal fee.

If you are unable to correct the problem yourself contact your dealer, retailer, or other IBM authorized service. Support phone numbers are also available by clicking HelpCenter phone list on the IBM support Web page at

http://www.ibm.com/pc/support

Before calling, please have available as much of the following information as possible:

1.Type, model and serial number fron the label on the back of your monitor.

2.Purchase receipt.

3.Description of problem.

4.Computer type and model.

5.System configuration(hardware fitted etc.)

6.System BIOS version number.

7.Operating System and version number

8.Display driver version number.

APPENDIX A – SPECIFICATIONS

 

CRT Size

35.5 cm (14 in.), 90º deflection,

CRT

 

29 mm neck

Viewable Image

33.5 cm (13.2 in.), diagonal

 

Size

 

 

Type

0.28 mm dot pitch.

Input

Video

0.7 Vpp, R,G,B Analog

Separate Sync.

TTL Level

 

H./V.- Sync.

Positive / Negative

Scanning

H-Frequency

30 - 54 kHz

Frequency

V-Frequency

50 - 120 Hz

Max. Resolution

 

1024 x 768

Video dot rate

 

65 MHz

Factory Preset mode

:

7

User Programmable

mode :

12

Power Source

 

Universal 100 – 240 V ac,

 

 

50 Hz / 60 Hz

Operating

 

0 to 40º C (0 to 104º F)

Humidity

 

10% to 85% relative, non-condensing

Dimensions

Carton

424 mm (1.39 ft) × 424 mm (1.39 ft)

 

 

× 455 mm (1.5 ft) (W × H × D)

 

Monitor & Base

350 mm (1.14 ft) × 349 mm (1.15 ft)

 

 

× 377 mm (1.2 ft) (W × H × D)

Weight

Unit (net)

10.4 kg ( Net )

 

Carton (gross)

12.0 kg ( Gross )

Signal Cable:

 

Attached Mini D-sub 15 Male

350

377

349

Unit: mm

14

 

Switch

● Power On/Off switch

 

 

● Up/Down Key

External Controls:

 

● Function Key

Functions

● Contrast

 

 

● Brightness

 

 

● H-Size

 

 

● H-Center

 

 

● V-Size

 

 

● V-Center

 

 

● Pincushion

 

 

● Trapezoid

 

 

● Rotation

Plug & Play

 

DDC1/2B

Power Management

 

EPA, VESA DPMS

Power Consumption

( Maximum )

75 W

Pre-set Display Area

 

250 mm (9.84 in.) x 187 mm (7.36 in.)

Regulatory

 

UL, FCC, CE, MPR II, FDA, CSA

Compliance

 

 

15

Loading...
+ 53 hidden pages