User Guides and Service Manuals User Guides and Service Manuals

Lenovo LT1953 User Manual

5.59 Mb

LT1953 Wide Flat Panel Monitor

User’s Guide

Product numbers

1453-HB1

First Edition (November 2012)

© Copyright Lenovo 2012.

LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.

LIMITED AND RESTRICTED RIGHTS NOTICE: If products, data, computer software, or services are delivered pursuant a General Services Administration "GSA" contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.

Contents

Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

General Safety guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii

Chapter 1. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1-1

Shipping contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Notice for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Types of adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Monitor controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Cable lock slot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Setting up your monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Connecting and turning on your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Chapter 2. Adjusting and using your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Comfort and accessibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Arranging your work area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Positioning your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Quick tips for healthy work habits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Accessibility information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Adjusting your monitor image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Using the direct access controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Using the On-Screen Display (OSD) controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4 Selecting a supported display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Image rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Understanding power management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9 Caring for your monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10

Detaching the monitor base and stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10 Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Chapter 3. Reference information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Monitor specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Manual image setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 Manually installing the monitor driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Installing the monitor driver in Windows 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Installing the monitor driver in Windows 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Installing the monitor driver in Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Getting further help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Service information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Customer responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8 Service parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Appendix A. Service and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Registering your option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Online technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1 Telephone technical support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Appendix B. Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Recycling information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Contents ii

Safety information

General Safety guidelines

For tips to help you use your computer safely, go to:

http://www.lenovo.com/safety

Before installing this product, read the Safety Information.

ííí

iii

Chapter 1. Getting started

This User’s Guide contains detailed information on the your Flat Panel Monitor. For a quick overview, please see the Setup Poster that was shipped with your monitor.

Shipping contents

The product package should include the following items:

Setup Poster

Reference and Driver CD

Flat Panel Monitor

Power Cord

DVI Cable(Optional)

Analog Interface Cable

Notice for use

To set up your monitor, please see the illustrations below.

Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.

26°

1.Carefully lay the monitor on a flat surface.

2.Put the stand and base to the monitor.

Note: To attach a VESA mount, please see "Wall Mounting (Optional)"on page 2-10.

Chapter 1. 1-1

Product overview

This section will provide information on adjusting monitor positions, setting user controls, and using the cable lock slot.

Types of adjustments

Tilt

Please see the illustration below for an example of the tilt range.

-5° 22°

Monitor controls

Your monitor has controls on the front which are used to adjust the display.

For information on how to use these controls, please see "Adjusting your monitor image"on page 2-3.

Chapter 1. 1-2

Cable lock slot

Your monitor is equipped with a cable lock slot located on the rear of your monitor (in the lower position).

Chapter 1. 1-3

Setting up your monitor

This section provides information on how to set up your monitor.

Connecting and turning on your monitor

Note: Be sure to read the Safety information located on page iii before carrying out this procedure.

1.Power off your computer and all attached devices, and unplug the computer power cord.

2.Connect the cables according to below icon indication.

3.Connect one end of the analog signal cable to the monitor D-SUB connector and the other end to the computer.

Chapter 1. 1-4

4.Connect the digital cable to the DVI connector of the monitor and the other end on the back of the computer.

Chapter 1. 1-5

5.Insert the power cord into the monitor, then plug the monitor power cord and the computer cord into grounded electrical outlets.

Note: A certified power supply cord has to be used with this equipment. The relevant national installation and or equipment regulations shall be considered. A certified power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2 3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.

6.Power on the monitor and the computer.

Chapter 1. 1-6

7.To install the monitor driver, insert the Reference and Driver CD, click Install driver, and follow the on-screen instructions.

8.To optimize your monitor image, press the Automatic Image Setup key.

Automatic image setup requires that the monitor is warmed up for at least 15 minutes. This is not required for normal operation.

Note: If automatic image setup does not establish the image that you prefer, perform manual image setup. See "Manual image setup"on page 3-4.

Registering your option

Thank you for purchasing this Lenovo™ product. Please take a few moments to register your Product and provide us with information that will help Lenovo to better serve you in the future. Your feedback is valuable to us in developing product and services that are important to you, as well as in developing better ways to communicate with you. Register your option on the following Web site: http://www.lenovo.com/register

Lenovo will send you information and updates on your registered product unless you indicate on the Web site questionnaire that you do not want to receive further information.

Chapter 1. 1-7

Chapter 2. Adjusting and using your monitor

This section will give you information on adjusting and using your monitor.

Comfort and accessibility

Good ergonomic practice is important to get the most from your personal computer and to avoid discomfort. Arrange your workplace and the equipment you use to suit your individual needs and the kind of work that you perform. In addition, use healthy work habits to maximize your performance and comfort while using your computer. For more detailed information on any of these topics, visit the Healthy Computing Web site at: http://www.lenovo.com/healthycomputing/.

Arranging your work area

Use a work surface of appropriate height and available working area to allow you to work in comfort.

Organize your work area to match the way you use materials and equipment. Keep your work area clean and clear for the materials that you typically use and place the items that you use most frequently, such as the computer mouse or telephone, within the easiest reach.

Equipment layout and setup play a large role in your working posture. The following topics describe how to optimize equipment setup to achieve and maintain good working posture.

Positioning your monitor

Position and adjust your computer monitor for comfortable viewing by considering the following items:

Viewing distance: Optimal viewing distances for monitors range from approximately 510mm to 760mm (20 in to 30 in) and can vary depending on ambient light and time of day. You can achieve different viewing distances by repositioning your monitor or by modifying your posture or chair position. Use a viewing distance that is most comfortable for you.

Monitor height: Position the monitor so your head and neck are in a comfortable and neutral (vertical, or upright) position. If your monitor does not have height adjustments, you might have to place books or other sturdy objects under the base of the monitor to achieve the desired height. A general guideline is to position the monitor such that the top of the screen is at or slightly below your eye-height when you are comfortably seated. However, be sure to optimize your monitor height so the line of site between your eyes and the center the monitor suits your preferences for visual distance and comfortable viewing when your eye muscles are in a relaxed state.

Tilt: Adjust the tilt of your monitor to optimize the appearance of the screen content and to accommodate your preferred head and neck posture.

General location: Position your monitor to avoid glare or reflections on the screen from overhead lighting or nearby windows.

The following are some other tips for comfortable viewing of your monitor:

Use adequate lighting for the type of work you are performing.

Chapter 2. 2-1

Use the monitor brightness, contrast controls, if equipped to optimize the image on your screen to meet your visual preferences.

Keep your monitor screen clean so you can focus on the screen’s contents.

Any concentrated and sustained visual activity can be tiring for your eyes. Be sure to periodically look away from your monitor screen and focus on a far object to allow your eye muscles to relax. If you have questions on eye fatigue or visual discomfort, consult a vision care specialist for advice.

Quick tips for healthy work habits

The following information is a summary of some important factors to consider to help you remain comfortable and productive while you use your computer.

Good posture starts with equipment setup: The layout of your work area and the setup of your computer equipment have a large effect on your posture while using your computer. Be sure to optimize the position and orientation of your equipment by following the tips outlined in "Arranging your work area"on page 2-1 so you can maintain a comfortable and productive posture. Also, be sure to use the adjustment capabilities of your computer components and office furniture to best suit your preferences now and as your preferences change over time.

Minor changes in posture can help avoid discomfort: The longer you sit and work with your computer, the more important it is to observe your working posture. Avoid assuming any one posture for an extended period of time. Periodically make minor modifications in your posture to help deter any discomforts that might arise. Make use of any adjustments that your office furniture or equipment provide to accommodate changes in posture.

Short, periodic breaks help ensure healthy computing: Because computing is primarily a static activity, it is particularly important to take short breaks from your work. Periodically, stand up from your work area, stretch, walk for a drink of water, or otherwise take a short break from using your computer. A short break from work gives your body a welcome change in posture and helps to ensure you remain comfortable and productive while you do work.

Accessibility information

Lenovo is committed to providing greater access to information and technology to people with disabilities. With assistive technologies, users can access information in the way most appropriate to their disability. Some of these technologies are already provided in your operating system; others can be purchased through vendors or accessed at:

http://www-03.ibm.com/research/accessibility/requests/accvpat.nsf/lenovo- bidx?OpenForm

Chapter 2. 2-2

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not

displayed.

Table 2-1. Direct access controls

Icon

Control

Description

 

 

 

 

 

 

Input Change

Switches the video input source

 

 

 

 

 

 

DDC-CI

Press and hold for 10 seconds to enable or disable

 

 

the DDC-CI function

 

 

 

 

 

 

 

 

 

Exit

Exit from menu

 

 

 

 

 

 

Image Setup

Activates automatic image adjustment

 

 

 

 

 

 

Brightness

Direct access to Brightness adjustment

 

 

 

 

 

 

Menu

Enter menu

 

 

 

 

 

 

Chapter 2. 2-3

Using the On-Screen Display (OSD) controls

To adjust the settings, the user controls can be viewed through the OSD.

To use the controls:

1.Press to open the main OSD menu.

2.Use or to move among the icons. Select an icon and press to access that function. If there is a sub-menu, you can move between options using or ,

then press to select that function. Use or to make adjustments. Press to save.

3.Press to move backwards through the sub-menus and exit from the OSD.

4.Press and hold for 10 seconds to lock the OSD. This will prevent accidental

adjustments to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to the OSD.

5.Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.

Chapter 2. 2-4

Table 2-2. OSD functions

 

 

 

 

Controls and

Controls and

OSD Icon on Main

 

 

 

Adjustments

Adjustments

Menu

Submenu

 

Description

(Analog)

(DVI)

 

 

 

 

 

 

 

 

Adjusts overall screen

 

 

Same as Analog

 

 

brightness

 

 

 

 

Brightness

 

 

 

 

 

Brightness/

 

 

 

 

 

 

Adjusts difference between

 

 

 

Contrast

 

light and dark areas

 

 

 

 

Contrast

 

 

 

 

 

 

 

 

 

 

 

 

 

Moves image left or right.

 

 

Controls Locked -

 

 

 

 

 

 

not required for

Image Position

Horizontal Position

 

 

 

 

DVI input

 

 

 

 

 

 

 

 

Moves image up or down.

 

 

 

 

Vertical Position

 

 

 

 

 

 

 

 

 

 

 

 

 

Optimizes image (size, position,

phase and clock).

 

Image Setup

Automatic

 

 

 

 

 

 

 

 

 

 

 

 

 

Manually optimizes image. See "Manual image

 

 

 

setup"on page 3-4.

 

 

 

 

Manual

Clock

 

 

 

 

 

 

 

 

 

 

Phase

 

 

 

 

 

Save

 

 

 

 

 

 

 

 

 

Adjusts intensity of red, green, and blue.

Same as Analog

Image Properties

Color

Preset mode

 

 

 

 

Neutral

 

 

 

 

 

 

 

 

 

 

sRGB

 

 

 

 

 

Reddish

 

 

 

 

 

Bluish

 

 

 

Custom

Red: Increases or decreases the saturation of ’red’ in the image.

Green: Increases or decreases the saturation of ’green’ in the image.

Blue: Increases or decreases the saturation of ’blue’ in the image.

Save: Saves the custom color choices.

This monitor can accept video signals through three different connectors. Most desktop

Input signal computers use a D-SUB connector. Select digital among OSD Controls when you use DVI connector.

-Selects D-SUB (Analog)

-Selects DVI (Digital)

Chapter 2. 2-5

Table 2-2. OSD functions

 

 

 

 

 

 

 

 

Controls and

Controls and

OSD Icon on Main

 

 

 

 

 

Adjustments

Adjustments

Menu

Submenu

Description

 

(Analog)

(DVI)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Selects type of scaled image.

 

Same as Analog

 

 

 

Scaling

• Original AR:Same Aspect Ratio with input

 

 

 

 

signal.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Full Screen: Expand image to full screen..

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shows resolution, refresh rate, and product details.

Same as Analog

Options

Information

Note: This screen does not allow any changes to

 

the settings.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Changes languages of menu.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: The language chosen only affects the

 

 

 

 

Menu Language

 

 

 

 

language of the OSD. It has no effect on any

 

 

 

 

 

 

 

 

 

 

 

 

 

 

software running on the computer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjusts menu location.

 

Same as Analog

 

 

 

Menu Position

Default

 

 

 

 

 

Default returns the menu position to the default

 

 

 

 

 

 

 

 

 

 

 

 

 

 

settings.

 

 

 

 

 

 

 

 

Custom

 

 

 

 

 

 

 

 

• Horizontal: Changes the horizontal position of

 

 

 

 

 

 

 

the OSD.

 

 

 

 

 

 

 

 

• Vertical: Changes the vertical position of the

 

 

 

 

 

 

 

OSD.

 

 

Save

Save the custom position choices.

Cancel

Factory default

• Reset

 

Reset monitor to the original settings.

Changes button repeat rate and menu time-out setting.

Accessibility

Button repeat rate:

 

Select or to change.

Off

Default

Slow

Menu time out: Sets the length of time the OSD will remain active after the last time a button is pressed.

Exit from menu.

Exit

Chapter 2. 2-6

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This is normal and the image can be readjusted using automatic image setup and the image controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently configured to a display mode outside the range of this monitor, you may need to reattach the CRT monitor temporarily until you have re-configured the system; preferably to 1440 x 900 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table 2-3. Factory set display modes

Timing

Refresh rate(Hz)

 

 

PAL

50Hz

 

 

640x350

70Hz

 

 

640x480

60,72,75Hz

 

 

720x400

70 Hz

 

 

800x600

60,72,75Hz

 

 

832x624

75Hz

 

 

1024x768

60,70,75Hz

 

 

1152x864

75Hz

 

 

1280x768

60Hz

 

 

1280x1024

60,70,75Hz

 

 

1366x768

60Hz

 

 

1440x900

60,75Hz

 

 

Chapter 2. 2-7

Understanding power management

Power management is invoked when the computer recognizes that you have not used your mouse or keyboard for a user-definable period. There are several states as described in the table below.

For optimal performance, switch off your monitor at the end of each working day, or whenever you expect to leave it unused for long periods during the day.

Table 2-4. Power indicator

 

 

 

Restoring

 

State

Power Indicator

Screen

Operation

Compliance

 

 

 

 

 

On

Green

Normal

 

 

 

 

 

 

 

Standby/Suspend

Amber

Blank

Press a key or

ENERGY STAR

 

 

 

move the mouse

 

 

 

 

There may be a

 

 

 

 

slight delay

 

 

 

 

before the image

 

 

 

 

reappears.

 

 

 

 

Note: Standby

 

 

 

 

also occurs if

 

 

 

 

there is no image

 

 

 

 

output to the

 

 

 

 

monitor.

 

 

 

 

 

 

Off

Off

Blank

Press the power

ENERGY STAR

 

 

 

button

 

 

 

 

There may be a

 

 

 

 

slight delay

 

 

 

 

before the image

 

 

 

 

reappears.

 

 

 

 

 

 

Chapter 2. 2-8

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.

Do not:

Apply water or liquid directly to your monitor.

Use solvents or abrasives.

Use flammable cleaning materials to clean your monitor or any other electrical equipment.

Touch the screen area of your monitor with sharp or abrasive items. This type of contact may cause permanent damage to your screen.

Use any cleaner which contains an anti-static solution or similar additives. This may harm the coating of the screen area.

Do:

Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.

Remove grease or finger marks with a damp cloth and a little mild detergent.

Detaching the monitor base and stand

step 1: Place the monitor on a soft and flat surface.

step 2: Remove the base and stand from the monitor,before disassembling the stand,make sure the stand at level to push out the stand cover,then remove the three screws.

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following:

Step 1: Verify that the Power button is turned Off, then disconnect the power cord. Step 2: Lay the LCD display face down on a towel or blanket.

Chapter 2. 2-9

Step 3: Remove the base from the monitor, refer to "Detaching the monitor base and stand".

Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm x100mm distance), VESA Mounting Screw M4 x 10 mm.

VESA hole

Step 5: Attach the LCD display to the wall, following the instructions in the wallmounting kit.

For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg

Chapter 2. 2-10

Chapter 3. Reference information

This section contains monitor specifications, instructions to manually install the monitor driver, troubleshooting information, and service information.

Monitor specifications

Table 3-1. Monitor specifications for type-model 1453-H*1

Dimensions

Depth

160.70 mm (6.33 in.)

 

Height

353.98 mm (13.94 in.)

 

Width

443.24 mm (17.45 in.)

 

 

 

Panel

Size

19 in.

 

Backlight

LED

 

Aspect ratio

16:10

 

 

 

Stand

Tilt

Range: -5° ~ 22°

 

 

 

VESA mount

Supported

100 mm x 100 mm (3.94 in. x 3.94 in.)

 

 

 

Image

Viewable image size

482.6 mm (19 in.)

 

Maximum height

255.15 mm (10.05 in.)

 

Maximum width

408.24 mm (16.07 in.)

 

Pixel pitch

0.2835 mm (0.01 in.)

 

 

 

Power input

Supply voltage

90-264VAC (100~240VAC+/-10%)

 

Max supply current

1.5 A

 

 

 

Power consumption

Normal operation

<20W

Note: Power consumption

Standby/Suspend

<0.5W (Analog), <0.5W (Digital)

figures are for the monitor

Off

<0.5W at 100Vac & 240Vac

and the power supply

combined

Note: without USB/

 

 

 

 

Webcam/external

 

 

speaker

 

 

 

 

Video input (Analog)

Input signal

Analog Direct Drive, 75 ohm 0.7V

 

Horizontal

1440 pixels (max)

 

addressability

 

 

Vertical addressability

900 lines (max)

 

Clock frequency

205 MHz

 

 

 

Chapter 3. 3-1

Table 3-1. Monitor specifications for type-model 1453-H*1

Video input (DVI)

Interface

DVI

 

Input signal

VESA TMDS (Panel Link™)

 

Horizontal

1440 pixels (max)

 

addressability

 

 

Vertical addressability

900 lines (max)

 

Clock frequency

165 MHz

 

 

 

Communications

VESA DDC

CI

 

 

 

Supported Display Modes

Horizontal frequency

30 kHz - 83 kHz

 

Vertical frequency

50 Hz - 75 Hz

 

 

 

 

Native Resolution

1440 x 900 at 60 Hz

 

 

 

Temperature

Operating

0° to 40° C (32° to 104° F)

 

Storage

-20° to 60° C (-4° to 140° F)

 

Shipping

-20° to 60° C (-4° to 140° F)

 

 

 

Humidity

Operating

10% to 80% non-condensing

 

Storage

5% to 95% non-condensing

 

Shipping

5% to 95% non-condensing

 

 

 

Chapter 3. 3-2

Troubleshooting

If you have a problem setting up or using your monitor, you might be able to solve it yourself. Before calling your dealer or Lenovo, try the suggested actions that are appropriate to your problem.

Table 3-2. Troubleshooting

Problem

Possible cause

Suggested action

Reference

 

 

 

 

 

 

The words "Out

The system is set to a

If you are replacing an

"Selecting a

 

of Range" are

display mode which

old monitor, reconnect it

supported display

 

shown on the

is not supported by

and adjust the display

mode"on page 2-7

 

screen, and the

the monitor.

mode to within the

 

 

power indicator

 

specified range for your

 

 

is flashing white.

 

new monitor.

 

 

 

 

If using a Windows

 

 

 

 

system, restart the system

 

 

 

 

in safe mode, then select a

 

 

 

 

supported display mode

 

 

 

 

for your computer.

 

 

 

 

If these options do not

 

 

 

 

work, contact the Support

 

 

 

 

Center.

 

 

 

 

 

 

 

The image

The video signal cable

Be sure the signal cable is

"Connecting and

 

quality is

is not connected with

firmly plugged into the

turning on your

 

unacceptable.

the monitor or system

system and monitor.

monitor"on page 1-4

 

completely.

 

 

 

 

 

 

 

 

 

 

The color settings

Select another color

"Adjusting your

 

 

may be incorrect.

setting from the OSD

monitor image"on

 

 

 

menu.

page 2-3

 

 

 

 

 

 

 

The automatic image

Perform automatic image

"Adjusting your

 

 

setup function was

setup.

monitor image"on

 

 

not performed.

 

 

page 2-3

 

 

 

 

 

 

The power

• The monitor’s

• Be sure the power

"Connecting and

 

indicator is not

power switch is

 

cord is connected

turning on your

 

lit and there is

not switched on.

 

properly.

monitor"on page 1-4

no image.

• The power cord is

• Be sure the outlet has

 

 

 

 

 

 

loose or

 

power.

 

 

 

disconnected.

Power on the

 

 

 

 

 

 

 

• There is no power

 

monitor.

 

 

 

at the outlet.

Try using another

 

 

 

 

 

 

 

 

 

power cord.

 

 

 

 

Try using another

 

 

 

 

 

electrical outlet.

 

 

 

 

 

 

 

Screen is blank

The monitor is in

• Press any key on the

"Understanding

 

and power

Standby/Suspend

 

keyboard or move

power

 

indicator is

mode.

 

the mouse to restore

management"on

 

amber.

 

 

operation.

page 2-8

 

 

 

Check the Power

 

 

 

 

 

Options settings on

 

 

 

 

 

your computer.

 

 

 

 

 

 

 

 

 

 

 

 

Chapter 3.

3-3

Table 3-2. Troubleshooting

Problem

Possible cause

Suggested action

Reference

 

 

 

 

The power

The video signal cable

Be sure the video cable is

"Connecting and

indicator is

is loose or

connected with the

turning on your

amber, but there

disconnected from the

system properly.

monitor"on page 1-4

is no image.

system or monitor.

 

 

 

 

 

 

 

 

 

The monitor

Adjust the brightness and

"Adjusting your

 

 

brightness and

contrast setting on the

monitor image"on

 

 

contrast are at the

OSD menu.

page 2-3

 

 

lowest setting.

 

 

 

 

 

 

One or more of

This is a characteristic

If there are more than five

Appendix A."Service

the pixels appear

of the LCD

pixels missing, contact

and Support"on page

discolored.

technology and is not

the Support Center.

A-1

 

 

an LCD defect.

 

 

 

 

 

 

 

 

Fuzzy lines

Image setup has

Adjust the resolution

"Adjusting your

 

in text or a

 

not been

settings on your system

monitor image"on

 

blurry

 

optimized.

to match the native

page 2-3

 

image.

Your system

resolution for this

 

 

 

monitor: 1440 x900 at 60

 

Horizontal

 

Display

 

 

Hz.

 

 

or vertical

 

Properties setting

 

 

lines

 

have not been

Perform automatic image

"Selecting a

 

through the

 

optimized.

setup. If automatic image

supported display

 

image.

 

 

setup does not help,

mode"on page 2-7

 

 

 

 

perform manual image

 

 

 

 

 

setup.

 

 

 

 

 

 

 

 

 

 

 

When working in the

See the Advanced

 

 

 

 

native resolution, you

section of your

 

 

 

 

may find additional

system’s display

 

 

 

 

improvements by

properties.

 

 

 

 

adjusting the Dots Per

 

 

 

 

 

Inch (DPI) setting on your

 

 

 

 

 

system.

 

 

 

 

 

 

 

Manual image setup

If automatic image setup does not establish the image that you prefer, perform manual image setup.

Note: Have your monitor powered on for about 15 minutes, until the monitor warms up.

1.Press at the bottom of the monitor to open the OSD menu.

2.Use or to select and press to access.

3.Use or to select manual and press to access.

4.Use or to select Clock and Phase adjustment.

Clock (pixel frequency) adjusts the number of pixels scanned by one horizontal sweep. If the frequency is not correct, the screen shows vertical stripes and the picture does not have the correct width.

Phase adjusts the phase of the pixel clock signal. With a wrong phase adjustment, the picture has horizontal disturbances in light picture.

5.When the image no longer looks distorted, save the Clock and Phase adjustments.

6.Press to leave the OSD menu.

Chapter 3. 3-4

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft Windows 8, Microsoft Windows Vista.

Installing the monitor driver in Windows 7

To use the Plug and Play feature in Microsoft Windows 7, do the following:

Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 7.

1.Turn off the computer, all attached devices.

2.Ensure that the monitor is connected correctly.

3.Turn on the monitor and then the system unit. Allow your computer to start the Windows 7 operating system.

4.Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound icon. and then clicking the Display icon.

5.Click the Change the display settings tab.

6.Click the Advanced Settings icon.

7.Click the Monitor tab.

8.Click the Properties button.

9.Click the Driver tab.

10.Click Update Driver, then click Browse the computer to find the driver program.

11.Select Pick from the list of device driver program on the computer.

12.Click the Have Disk button. Click the Browse button and navigate to the following directory:

X:\Monitor Drivers

(where X is the drive letter designator for the CD-ROM drive).

13.Select the "lenlt1953wA.inf" file and click the Open button. Click the OK button.

14.Select LEN LT1953wA and click Next. The files will be copied from the CD to your hard disk drive.

15.Close all open windows and remove the CD.

16.Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1440 x900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Chapter 3. 3-5

Installing the monitor driver in Windows 8

To use the Plug and Play feature in Microsoft Windows 8, do the following:

Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows 8.

1.Turn off the computer, all attached devices.

2.Ensure that the monitor is connected correctly.

3.Turn on the monitor and then the system unit. Allow your computer to start the Windows 8 operating system.

4.Open the Display Properties window by clicking Start, Control Panel and Hardware and Sound icon. and then clicking the Display icon.

5.Click the Change the display settings tab.

6.Click the Advanced Settings icon.

7.Click the Monitor tab.

8.Click the Properties button.

9.Click the Driver tab.

10.Click Update Driver, then click Browse the computer to find the driver program.

11.Select Pick from the list of device driver program on the computer.

12.Click the Have Disk button. Click the Browse button and navigate to the following directory:

X:\Monitor Drivers

(where X is the drive letter designator for the CD-ROM drive).

13.Select the "lenlt1953wA.inf" file and click the Open button. Click the OK button.

14.Select LEN LT1953wA and click Next. The files will be copied from the CD to your hard disk drive.

15.Close all open windows and remove the CD.

16.Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1440 x900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Chapter 3. 3-6

Installing the monitor driver in Windows Vista

To use the Plug and Play feature in Microsoft Windows Vista, do the following:

Note: You must download file from the Reference and Driver CD to use the Plug and Play feature in Windows Vista.

1.Turn off the computer and all attached devices.

2.Ensure that the monitor is connected correctly.

3.Turn on the monitor and then the system unit. Allow your computer to start the Windows Vista operating system.

4.Click Start, Control Panel and then click the Hardware and Sound icon.

5.Click the Personalization icon.

6.Click the Display Settings icon.

7.Click the Advanced Settings button.

8.Click the Monitor tab.

9.Click the Properties button.

10.Click the Driver tab.

11.Click Update Driver, then click Browse the computer to find the driver program.

12.Select Pick from the list of device driver program on the computer.

13.Click the Have Disk button. Click the Browse button and navigate to the following directory:

X:\Monitor Drivers

(where X is the drive letter designator for the CD-ROM drive).

14.Select the "lenlt1953wA.inf" file and click the Open button. Click the OK button.

15.Select LEN LT1953wA and click Next. The files will be copied from the CD to your hard disk drive.

16.Close all open windows and remove the CD.

17.Restart the system. The system will automatically select the maximum refresh rate and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality. Lenovo recommends using either 1440 x900 at a refresh rate of 60 Hz, or 640 x 480 at a refresh rate of 60 Hz.

Getting further help

If you still can’t solve your problem, please contact the Lenovo Support Center. For more information on contacting the Support Center, please see Appendix A."Service and Support"on page A-1

Chapter 3. 3-7

Service information

Customer responsibilities

The warranty does not apply to a product which has been damaged due to accident, misuse, abuse, improper installation, usage not in accordance with product specifications and instructions, natural or personal disaster, or unauthorized alterations, repairs or modifications.

The following are examples of misuse or abuse and not covered by warranty:

Images burned onto the screen of a CRT monitor. Burned image is preventable by utilizing a moving screen saver or power management.

Physical damage to covers, bezel, base and cables.

Scratches or punctures on monitor screens.

Service parts

The following parts are for use by Lenovo service, or Lenovo aurthorized dealers, to supprot the customer warranty. Parts are for service use only. The table below shows information for model 1453-H*1.

Table 3-3. List of service parts

FRU (FIELD

DESCRIPTION

Machine

COLOR

REPLACEABLE UNIT)

 

Type/Model(MTM)

 

 

 

 

PART NUMBER

 

 

 

 

 

 

 

03X7973

LT1953 Wide-FRU

1453-HB1

RB

 

Monitor

 

 

 

 

 

 

40Y7443

LT1953 Wide-Analog

1453-HB1

RB

(pick up from L197w)

cable (1.8m, RoHS)

 

 

 

 

 

 

 

 

 

40Y7444

LT1953 Wide - DVI

1453-HB1

RB

(pick up from L197w)

cable

 

 

 

 

 

 

 

 

 

03X7974

LT1953 Wide-FRU

1453-HB1

RB

 

Stand and Base

 

 

 

 

 

 

Chapter 3. 3-8

Appendix A. Service and Support

The following information describes the technical support that is available for your product, during the warranty period or throughout the life of your product. Refer to the Lenovo Limited Warranty for a full explanation of Lenovo warranty terms.

Registering your option

Register to receive product service and support updates, as well as free and discounted computer accessories and content. Go to: http://www.lenovo.com/register

Online technical support

Online technical support is available during the lifetime of a product at:

http://www.lenovo.com/support

Product replacement assistance or exchange of defective components also is available during the warranty period. In addition, if your option is installed in a Lenovo computer, you might be entitled to service at your location. A Lenovo technical support representative can help you determine the best alternative.

Telephone technical support

Installation and configuration support through the Customer Support Center will be available until 90 days after the option has been withdrawn from marketing. After that time, the support is cancelled, or made available for a fee, at Lenovo’s discretion. Additional support is also available for a nominal fee.

Before contacting a Lenovo technical support representative, please have the following information available: option name and number, proof of purchase, computer manufacturer, model, serial number and manual, the exact wording of any error message, description of the problem, and the hardware and software configuration information for your system.

Your technical support representative might want to walk you through the problem while you are at your computer during the call.

Telephone numbers are subject to change without notice. The most up-to-date telephone list for Lenovo Support is always available at: http://consumersupport.lenovo.com

Country or Region

Telephone Number

 

 

 

 

Africa

Africa: +44 (0)1475-555-055

 

 

South Africa: +27-11-3028888 and 0800110756

 

 

Central Africa: Contact the nearest Lenovo

 

 

Business Partner

 

 

 

 

Argentina

0800-666-0011 (Spanish)

 

 

 

 

Australia

131-426 (English)

 

 

 

 

Austria

Warranty service and support: 01-211-454-610 (German)

 

 

 

 

 

Appendix A.

A-1

Country or Region

Telephone Number

 

 

 

 

Belgium

Warranty service and support: 02-225-3611 (Dutch, French)

 

 

 

 

Bolivia

0800-10-0189 (Spanish)

 

 

 

 

Brazil

Sao Paulo region: (11) 3889-8986

 

 

Outside Sao Paulo region: 0800-701-4815

 

 

(Brazilian Portuguese)

 

 

 

 

Brunei

801-1041 (English, Bahasa Melayu)

 

 

 

 

Canada

Toronto: 416-383-3344

 

 

Outside Toronto: 1-800-565-3344

 

 

(English, French)

 

 

 

 

Chile

Toll Free: 188-800-442-488

 

 

800-361-213

 

 

(Spanish)

 

 

 

 

China

86-10-58851110

 

 

800-990-8888

 

 

(Mandarin)

 

 

 

 

China

ThinkCentre® Commercial PC: 8205-0333

 

(Hong Kong S.A.R.)

Multimedia Home PC: 800-938-228

 

 

(Cantonese, English, Mandarin)

 

 

 

 

China

ThinkCentre Commercial PC: 795-9892

 

(Macau S.A.R.)

Multimedia Home PC: 0800-336

 

 

(Cantonese, English, Mandarin)

 

 

 

 

Colombia

1-800-912-3021 (Spanish)

 

 

 

 

Costa Rica

0-800-011-1029 (Spanish)

 

 

 

 

Croatia

0800-0426

 

 

 

 

Cyprus

+357-22-841100

 

 

 

 

Czech Republic

+420-2-7213-1316

 

 

 

 

Denmark

Warranty service and support: 7010-5150 (Danish)

 

 

 

 

Dominican Republic

1-866-434-2080 (Spanish)

 

 

 

 

Ecuador

1-800-426911 (Spanish)

 

 

 

 

Egypt

+202-35362525

 

 

 

 

El Salvador

800-6264 (Spanish)

 

 

 

 

Estonia

+372 6776793

 

 

+372 66 00 800

 

 

 

 

Finland

Warranty service and support: +358-800-1-4260 (Finnish)

 

 

 

 

France

Warranty service and support (hardware): 0810-631-213

 

 

Warranty service and support (software): 0810-631-020

 

 

(French)

 

 

 

 

Germany

Warrantyserviceandsupport:01805 004618 (German)

 

 

 

 

Greece

+30-210-680-1700

 

 

 

 

Guatemala

1800-624-0051 (Spanish)

 

 

 

 

Honduras

Tegucigalpa: 232-4222

 

 

San Pedro Sula: 552-2234

 

 

(Spanish)

 

 

 

 

 

Appendix A.

A-2

Country or Region

Telephone Number

 

 

 

 

Hungary

+36-1-382-5716

 

 

+36-1-382-5720

 

 

(English, Hungarian)

 

 

 

 

India

1800-425-2666

 

 

+91-80-2535-9182

 

 

(English)

 

 

 

 

Indonesia

021 5238 823

 

 

Local number only: 001-803-606-282

 

 

DID (Direct Inward Dialing): +603 8315 6859

 

 

(English, Bahasa Indonesia)

 

 

 

 

Ireland

Warranty service and support: 01-881-1444 (English)

 

 

 

 

Israel

Givat Shmuel Service Center: +972-3-531-3900

 

 

(Hebrew, English)

 

 

 

 

Italy

Warranty service and support: +39-800-820094 (Italian)

 

 

 

 

Japan

Toll Free: 0120-20-5550

 

 

International: +81-46-266-4716

 

 

The above numbers will be answered with a Japanese language

 

voice prompt. For telephone support in English, please wait for the

 

Japanese voice prompt to end, and an operator will answer. Please

 

say "English support please," and your call will be transferred to

 

an English-speaking operator.

 

 

PC software: 0120-558-695

 

 

Overseas calls: +81-44-200-8666

 

 

(Japanese)

 

 

 

 

Korea

1588-6782 (Korean)

 

 

 

 

Latvia

+371 7070360

 

 

 

 

Lithuania

+370 5 278 66 00

 

 

 

 

Luxembourg

+352-360-385-343 (French)

 

 

 

 

Malaysia

Local number only: 1800-88-1889

 

 

DID: +603 8315 6855

 

 

(English, Bahasa Melayu)

 

 

 

 

Malta

+35621445566

 

 

 

 

Mexico

001-866-434-2080 (Spanish)

 

 

 

 

Middle East

+44 (0)1475-555-055

 

 

 

 

Netherlands

+31-20-514-5770 (Dutch)

 

 

 

 

New Zealand

0800-733-222 (English)

 

 

 

 

Nicaragua

001-800-220-1830 (Spanish)

 

 

 

 

Norway

Warranty service and support: 8152-1550 (Norwegian)

 

 

 

 

Panama

Lenovo Customer Support Center: 001-866-434-2080 (Toll Free)

 

 

206-6047 (Spanish)

 

 

 

 

Peru

0-800-50-866 (Spanish)

 

 

 

 

Philippines

1800-1601-0033 (English, Filipino)

 

 

 

 

Poland

+48-22-878-6999 (Polski)

 

 

 

 

Portugal

+351-21-892-7046 (Portuguese)

 

 

 

 

 

Appendix A.

A-3

Country or Region

Telephone Number

 

 

Romania

+4-021-224-4015

 

 

Russia

Moscow: +7-(495)-258-6300

 

Toll Free: +8-800-200-6300

 

(Russian)

 

 

Singapore

Local number only: 800-6011-343

 

DID: +603 8315 6859 (English)

 

 

Slovakia

+421-2-4954-5555

 

 

Slovenia

+386-1-200-50-60 (Slovenian)

 

 

Spain

91-714-7983

 

0901-100-000

 

(Spanish)

 

 

Sri Lanka

+9411 2493547

 

+9411 2493548

 

(English)

 

 

Sweden

Warranty service and support: 077-117-1040 (Swedish)

 

 

Switzerland

Warranty service and support: 0800-55-54-54

 

(German, French, Italian)

 

 

Taiwan

886-2-8723-9799

 

0800-000-700

 

(Mandarin)

 

 

Thailand

Local number only: 1-800-060-066

 

66 2273 4088

 

DID: +603 8315 6857 (Thai, English)

 

 

Turkey

0212 336 03 66 , 00800 448 825 165 (Turkish)

 

 

United Kingdom

Standard warranty support: 08705-500-900 (English)

 

 

United States

1-800-426-7378 (English)

 

 

Uruguay

000-411-005-6649 (Spanish)

 

 

Venezuela

0-800-100-2011 (Spanish)

 

 

Vietnam

For Northern Area and Hanoi City:

 

844 3 946 2000 or 844 3 942 6457

 

For Southern Area and Ho Chi Minh City:

 

848 3 829 5160 or 844 3 942 6457

 

(Vietnamese, English)

 

 

Appendix A. A-4

Appendix B. Notices

Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.

However, it is the user 's responsibility to evaluate and verify the operation of any other product, program, or service.

Lenovo may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Lenovo (United States), Inc. 1009 Think Place - Building One Morrisville, NC 27560

U.S.A.

Attention: Lenovo Director of Licensing

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Lenovo may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.

The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Lenovo product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Lenovo or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.

Lenovo may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this publication to non-Lenovo Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.

Appendix B. B-1

Recycling information

Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to:

http://www.lenovo.com/lenovo/environment/recycling

Collecting and recycling a disused Lenovo computer or monitor

If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources. Computers and monitors are categorized as industrial waste and should be properly disposed of by an industrial waste disposal contractor certified by a local government. In accordance with the Law for Promotion of Effective Utilization of Resources, Lenovo Japan provides, through its PC Collecting and Recycling Services, for the collecting, reuse, and recycling of disused computers and monitors. For details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/ pcrecycle/. Pursuant to the Law for Promotion of Effective Utilization of Resources, the collecting and recycling of home-used computers and monitors by the manufacturer was begun on October 1, 2003. This service is provided free of charge for home-used computers sold after October 1, 2003. For details, visit the Lenovo Web site at www.ibm.com/jp/pc/service/recycle/personal/.

Disposing of Lenovo computer components

Some Lenovo computer products sold in Japan may have components that contain heavy metals or other environmental sensitive substances. To properly dispose of disused components, such as a printed circuit board or drive, use the methods described above for collecting and recycling a disused computer or monitor.

Trademarks

The following terms are trademarks of Lenovo in the United States, other countries, or both:

Lenovo

The Lenovo logo ThinkCenter ThinkPad ThinkVision

Microsoft, Windows, and Windows NT are trademarks of the Microsoft group of companies.

Other company, product, or service names may be trademarks or service marks of others.

Appendix B. B-2