lasertools 6809 Instruction Manual
Engine Timing Tool Kit
for VW Group 1.4, 1.6, 2.0L TDi CR
Part No. 6809
Instructions
www.lasertools.co.uk
A comprehensive kit for removal and fitting of the camshaft drive belt on the popular
1.4, 1.6 and 2.0L TDi CR diesel engines found across the VW Group range from 2012
onwards.
• Applications include: Audi, Seat, Skoda & Volkswagen, fitted with 1.4, 1.6, 2.0L common
rail diesel engines (from 2012).
• Tools equivalent to OEM: T10265, T10264, T10492, T10409, T10060A, T10051 & T10490.
• Offers 1.4, 1.6 & 2.0L TDi CRD coverage from 2012 onwards.
• Includes tooling for timing the camshaft gears. Supplied in a metal case.
• Crankshaft Timing Tool and Locking Pin (C695) EU Registered Design.
• The engines covered utilise a belt with transfer gears in the head. This kit includes the pins
required for timing the camshafts in the head.
• Includes the tools required to work on the latest versions of the engines listed. Due to
changes in the OEM recommended tooling for these engines this kit supersedes and
replaces the Laser 6286 kit.
Note: for pre 2012 engine codes please see Laser Part No. 5130
ComponentsIntroduction
G
F
C
B
Ref. Code OEM Ref. Description
A C451 T10265 2.5mm Cambelt Tensioner Locking Tool
B C450 T10264 6mm Ball End Hex Key
C C773 T10409 8mm Hex Key
D C768 T10492 Fuel Pump Locking and Camshaft Alignment Pins x2
E C283 T10060A Auxiliary Drive Tensioner Pin
F C101
G C695
H C503 T10051 Sprocket Holding Tool for High Pressure Fuel Pump (1/2"D)
T10490 Crankshaft Timing Tool and Locking Pin (EU Registered)
H
E
D
A
www.lasertools.co.uk
www.lasertools.co.uk
32
Loading...