Lantronix EDS32PR, EDS8PR, EDS4100, EDS16PR User Manual

0 (0)
Part Number 900-433
Revision F November 2007
EDS Device Servers/Terminal Servers
User Guide
EDS4100
EDS16PR
EDS32PR
EDS Device Servers User Guide 2
Copyright & Trademark
© 2006, 2007 Lantronix. All rights reserved. No part of the contents of this book may be
transmitted or reproduced in any form or by any means without the written permission of
Lantronix. Printed in the United States of America.
Ethernet is a trademark of XEROX Corporation. UNIX is a registered trademark of The
Open Group. Windows 95, Windows 98, Windows 2000, and Windows NT are
trademarks of Microsoft Corp. Netscape is a trademark of Netscape Communications
Corporation.
Contacts
Lantronix Corporate Headquarters
15353 Barranca Parkway
Irvine, CA 92618, USA
Phone: 949-453-3990
Fax: 949-453-3995
Technical Support
Online: www.lantronix.com/support
Sales Offices
For a current list of our domestic and international sales offices, go to the Lantronix web
site at www.lantronix.com/about/contact
.
Disclaimer & Revisions
Operation of this equipment in a residential area is likely to cause interference, in which
case the user, at his or her own expense, will be required to take whatever measures
may be required to correct the interference.
Changes or modifications to this device not explicitly approved by Lantronix will void the
user's authority to operate this device.
Attention: With the purchase of the EDS, the OEM agrees to an OEM firmware license
agreement that grants the OEM a non-exclusive, royalty-free firmware license to use and
distribute the binary firmware image provided, only to the extent necessary to use the
EDS hardware. For further details, please see the EDS OEM firmware license
agreement.
The information in this guide may change without notice. The manufacturer assumes no
responsibility for any errors that may appear in this guide.
Date Rev. Comments
3/06 A Initial Document
10/06 B EDS16PR and EDS32PR products added.
12/06 D German and English TUV certification added.
1/07 E EDS8PR products added.
11/07 F Added LPD, Terminal, Host, RSS, and RTC pages; updated; XML and
other pages.
EDS Device Servers User Guide 3

Contents

1: Preface 11
Purpose and Audience_______________________________________________ 11
Summary of Chapters _______________________________________________ 11
Additional Documentation ____________________________________________ 12
2: Introduction 13
EDS4100 Overview _________________________________________________ 13
Features ______________________________________________________________ 14
EDS8PR, EDS16PR, and EDS32PR Overview____________________________ 14
Features ______________________________________________________________ 15
Evolution OS™ ____________________________________________________ 15
Web-Based Configuration and Troubleshooting _______________________________ 16
Command-Line Interface (CLI)_____________________________________________ 16
SNMP Management_____________________________________________________ 16
XML-Based Architecture and Device Control__________________________________ 16
Really Simple Syndication (RSS)___________________________________________ 16
Enterprise-Grade Security ________________________________________________ 16
Troubleshooting Capabilities ______________________________________________ 17
Applications _______________________________________________________ 18
Building Automation/Security ______________________________________________ 18
Industrial Automation ____________________________________________________ 18
Medical/Healthcare______________________________________________________ 18
Retail Automation/Point-of-Sale ____________________________________________ 19
Terminal Server/Console Management ______________________________________ 19
Traffic Management _____________________________________________________ 19
3: Installation: EDS4100 20
Package Contents __________________________________________________ 20
User-Supplied Items ________________________________________________ 20
Identifying Hardware Components______________________________________ 21
Serial Ports____________________________________________________________ 22
Ethernet Port __________________________________________________________ 23
Terminal Block Connector ________________________________________________ 23
LEDs_________________________________________________________________ 23
Reset Button___________________________________________________________ 24
Physically Installing the EDS4100 ______________________________________ 24
Contents
EDS Device Servers User Guide 4
Finding a Suitable Location _______________________________________________ 24
Connecting the EDS4100_________________________________________________ 24
4: Installation: EDS8PR, EDS16PR and EDS32PR 26
Package Contents __________________________________________________ 26
User-Supplied Items ________________________________________________ 26
Identifying Hardware Components______________________________________ 27
Serial Ports____________________________________________________________ 28
Ethernet Port __________________________________________________________ 28
LEDs_________________________________________________________________ 28
Reset Button___________________________________________________________ 29
Physically Installing the EDS8/16/32PR__________________________________ 29
Finding a Suitable Location _______________________________________________ 29
Connecting the EDS8/16/32PR ____________________________________________ 29
5: Getting Started 31
Using DeviceInstaller ________________________________________________ 31
Starting DeviceInstaller __________________________________________________ 31
Viewing EDS Properties __________________________________________________ 32
Configuration Methods_______________________________________________ 34
Configuring from the Web Manager Interface _________________________________ 34
Configuring via an SSH/Telnet Session or Serial Port Using the CLI _______________ 34
Configuring from the XML Interface _________________________________________ 35
6: Configuration Using the Web Manager 36
Accessing the Web Manager through a Web Browser ______________________ 36
Navigating Through the Web Manager __________________________________ 38
Device Status Page _________________________________________________ 47
7: Network, Line, Tunnel, and Terminal Settings 48
Network Configuration Page __________________________________________ 48
Line Settings Pages_________________________________________________ 51
Line – Statistics Page____________________________________________________ 52
Line - Configuration Page ________________________________________________ 53
Line – Command Mode Page _____________________________________________ 55
Tunnel Pages______________________________________________________ 56
Tunnel – Statistics Page _________________________________________________ 56
Tunnel – Serial Settings Page _____________________________________________ 57
Tunnel – Start/Stop Characters Page _______________________________________ 59
Tunnel – Accept Mode Page ______________________________________________ 61
Tunnel – Connect Mode Page _____________________________________________ 63
Contents
EDS Device Servers User Guide 5
Tunnel – Disconnect Mode Page ___________________________________________ 66
Tunnel – Packing Mode Page _____________________________________________ 68
Tunnel – Modem Emulation Page __________________________________________ 69
Tunnel – AES Keys Page_________________________________________________ 70
Terminal Page _____________________________________________________ 72
Host Page ________________________________________________________ 73
Login Connect Menu ________________________________________________ 75
8: Services Settings 76
DNS Page ________________________________________________________ 76
SNMP Page _______________________________________________________ 77
FTP Page_________________________________________________________ 79
TFTP Page________________________________________________________ 80
Syslog Page_______________________________________________________ 81
HTTP Pages ______________________________________________________ 82
HTTP Statistics Page ____________________________________________________ 82
HTTP Configuration Page ________________________________________________ 82
HTTP Authentication Page________________________________________________ 85
RSS Page ________________________________________________________ 88
LPD Pages________________________________________________________ 89
LPD Statistics Page _____________________________________________________ 90
LPD Configuration Page _________________________________________________ 91
9: Security Settings 93
SSH Pages _______________________________________________________ 93
SSH Server: Host Keys Page _____________________________________________ 93
SSH Server: Authorized Users Page ________________________________________ 96
SSH Client: Known Hosts Page ____________________________________________ 97
SSH Client: Users Page__________________________________________________ 98
SSL Page________________________________________________________ 101
10: Maintenance and Diagnostics Settings 105
Filesystem Pages__________________________________________________ 105
Filesystem Statistics Page _______________________________________________ 105
Filesystem Browser Page _______________________________________________ 106
Protocol Stack Page _______________________________________________ 109
IP Address Filter Page ______________________________________________ 110
Query Port Page __________________________________________________ 112
Diagnostics Pages _________________________________________________ 113
Diagnostics: Hardware Page _____________________________________________ 113
Contents
EDS Device Servers User Guide 6
MIB-II Network Statistics Page____________________________________________ 114
IP Sockets Page_______________________________________________________ 115
Diagnostics: Ping Page _________________________________________________ 116
Diagnostics: Traceroute Page ____________________________________________ 117
Diagnostics: DNS Lookup Page___________________________________________ 118
Diagnostics: Memory Page ______________________________________________ 118
Diagnostics: Buffer Pools ________________________________________________ 120
Diagnostics: Processes Page ____________________________________________ 120
Real Time Clock Page ______________________________________________ 122
System Page _____________________________________________________ 123
11: Advanced Settings 125
Email Pages______________________________________________________ 125
Email Statistics Page ___________________________________________________ 125
Email Configuration Page _______________________________________________ 126
CLI Pages _______________________________________________________ 128
Command Line Interface Statistics Page ____________________________________ 128
Command Line Interface Configuration Page ________________________________ 129
XML Pages ______________________________________________________ 131
XML: Export Configuration Page __________________________________________ 131
XML: Export Status ____________________________________________________ 133
XML: Import Configuration Page __________________________________________ 135
12: Updating Firmware 141
Obtaining Firmware ________________________________________________ 141
Upgrading Using DeviceInstaller ______________________________________ 141
Loading New Firmware _________________________________________________ 141
Updating the Boot Loader from DeviceInstaller _______________________________ 141
Updating Firmware _____________________________________________________ 142
A: Factory Default Configuration 143
Network Configuration Settings _______________________________________ 143
Serial Port Line Settings ____________________________________________ 143
Tunnel Settings ___________________________________________________ 144
Serial Settings ________________________________________________________ 144
Start/Stop Characters___________________________________________________ 145
Accept Mode _________________________________________________________ 145
Connect Mode ________________________________________________________ 145
Disconnect Mode ______________________________________________________ 146
Packing Mode_________________________________________________________ 146
Modem Emulation _____________________________________________________ 147
Contents
EDS Device Servers User Guide 7
AES Keys ____________________________________________________________ 147
Host Settings _____________________________________________________ 147
Terminal Settings__________________________________________________ 148
DNS Settings _____________________________________________________ 148
SNMP Settings____________________________________________________ 148
FTP Settings _____________________________________________________ 149
TFTP Settings ____________________________________________________ 149
Syslog Settings ___________________________________________________ 149
HTTP Settings ____________________________________________________ 150
Configuration _________________________________________________________ 150
Authentication_________________________________________________________ 150
RSS ____________________________________________________________ 150
CLI Settings ______________________________________________________ 151
Telnet _______________________________________________________________ 151
Email Settings ____________________________________________________ 151
LPD Settings _____________________________________________________ 152
IP Address Filter __________________________________________________ 152
Query Port Settings ________________________________________________ 152
System Settings ___________________________________________________ 153
Real Time Clock___________________________________________________ 153
Protocol Stack ____________________________________________________ 153
TCP ________________________________________________________________ 153
ICMP _______________________________________________________________ 153
ARP ________________________________________________________________ 153
B: Technical Specifications 154
EDS4100 ________________________________________________________ 154
EDS8/16/32PR____________________________________________________ 156
C: Networking and Security 158
SSH ____________________________________________________________ 158
How Does SSH Authenticate? ____________________________________________ 158
What Does SSH Protect Against? _________________________________________ 158
SSL ____________________________________________________________ 159
Benefits of SSL________________________________________________________ 159
How SSL Works _______________________________________________________ 159
Digital Certificates _____________________________________________________ 160
Tunneling ________________________________________________________ 161
Tunneling and the EDS _________________________________________________ 162
Contents
EDS Device Servers User Guide 8
Connect Mode ________________________________________________________ 162
Accept Mode _________________________________________________________ 163
Disconnect Mode ______________________________________________________ 163
Packing Mode_________________________________________________________ 164
Modem Emulation _________________________________________________ 164
Command Mode_______________________________________________________ 165
D: Technical Support 167
E: Lantronix Cables and Adapters 168
F: Compliance 169
Lithium Battery Notice ______________________________________________ 170
Installationsanweisungen____________________________________________ 170
Rackmontage _________________________________________________________ 170
Energiezufuhr _________________________________________________________ 170
Erdung ______________________________________________________________ 170
Installation Instructions _____________________________________________ 170
Rack Mounting ________________________________________________________ 170
Input Supply __________________________________________________________ 171
Grounding____________________________________________________________ 171
G: Warranty 172
Index 173
Figures
Figure 2-1. EDS4100 4 Port Device Server.............................................................. 14
Figure 2-2. EDS16PR Device Server........................................................................ 15
Figure 3-1. Front View of the EDS4100..................................................................... 21
Figure 3-2. Back View of the EDS4100 ..................................................................... 21
Figure 3-3. RS-232 Serial Port Pins (Serial Ports 1, 2, 3, 4) ..................................... 22
Figure 3-4. RS-422/RS-485 Serial Port Pins ............................................................. 22
Figure 3-5. Terminal Block Connector Pin Assignments ........................................... 23
Figure 3-6 .Back Panel LEDs..................................................................................... 23
Figure 3-7. Example of EDS4100 Connections ......................................................... 25
Figure 4-1. Front View of the EDS16PR.................................................................... 27
Figure 4-2. Back View of the EDS16PR .................................................................... 27
Figure 4-3. RJ45 Serial Port ...................................................................................... 28
Figure 4-4. Example of EDS16PR Connections ........................................................ 30
Figure 5-1. Lantronix DeviceInstaller ........................................................................ 32
Figure 5-2. EDS4100 Properties................................................................................ 33
Figure 6-1. Prompt for User Name and Password..................................................... 36
Figure 6-2. Web Manager Device Status Page ......................................................... 37
Figure 6-3. Web Manager Menu Structure (1 of 5).................................................... 40
Figure 6-4. Web Manager Menu Structure (2 of 5).................................................... 41
Figure 6-5. Web Manager Menu Structure (3 of 5).................................................... 42
Contents
EDS Device Servers User Guide 9
Figure 6-6. Web Manager Menu Structure (4 of 5).................................................... 43
Figure 6-7. Web Manager Menu Structure (5 of 5)................................................... 44
Figure 6-8. Components of the Web Manager Page................................................. 45
Figure 6-9. EDS Menu ............................................................................................... 46
Figure 6-10. Device Status Page (EDS4100) ............................................................ 47
Figure 7-1. Network Configuration............................................................................. 49
Figure 7-2. Line – Statistics Page.............................................................................. 52
Figure 7-3. Line – Configuration Page....................................................................... 53
Figure 7-4. Line – Command Mode Page.................................................................. 55
Figure 7-5. Tunnel - Statistics Page.......................................................................... 57
Figure 7-6. Tunnel – Serial Settings Page................................................................. 58
Figure 7-7. Tunnel – Start/Stop Chars Page ............................................................. 60
Figure 7-8. Tunnel – Accept Mode Page .................................................................. 61
Figure 7-9. Connect Mode Page................................................................................ 64
Figure 7-10. Tunnel – Disconnect Mode Page .......................................................... 67
Figure 7-11. Tunnel – Packing Mode Page ............................................................... 68
Figure 7-12. Tunnel – AES Keys Page...................................................................... 71
Figure 7-13. Terminal Page ....................................................................................... 72
Figure 7-14. Host Page.............................................................................................. 74
Figure 8-1. DNS Page................................................................................................ 76
Figure 8-2. SNMP Page............................................................................................. 77
Figure 8-3. FTP Page................................................................................................. 79
Figure 8-4. TFTP Page .............................................................................................. 80
Figure 8-5. Syslog Page ............................................................................................ 81
Figure 8-6. HTTP Statistics Page .............................................................................. 82
Figure 8-7. HTTP Configuration Page ....................................................................... 83
Figure 8-8. HTTP Authentication Page...................................................................... 86
Figure 8-9. RSS Page................................................................................................ 88
Figure 8-10. LPD Statistics Page............................................................................... 90
Figure 8-11. LPD Configuration Page........................................................................ 91
Figure 9-1. SSH Server: Host Keys Page.................................................................. 94
Figure 9-2. SSH Server: Authorized Users Page ...................................................... 96
Figure 9-3. SSH Client: Known Hosts Page .............................................................. 97
Figure 9-4. SSH Client: Users Page .......................................................................... 99
Figure 9-5. SSL Page (top)...................................................................................... 101
Figure 9-6. SSL Page (Bottom)................................................................................ 102
Figure 10-1. Filesystem Statistics Page................................................................... 106
Figure 10-2. Filesystem Browser Page.................................................................... 107
Figure 10-3. Protocol Stack Page............................................................................ 109
Figure 10-4. IP Address Filter Page......................................................................... 111
Figure 10-5. Query Port Page.................................................................................. 112
Figure 10-6. MIB-II Network Statistics Page............................................................ 114
Figure 10-7 IP Sockets Page ................................................................................... 115
Figure 10-8 Diagnostics: Ping Page ........................................................................ 116
Figure 10-9 Diagnostics: Traceroute Page .............................................................. 117
Figure 10-10 Diagnostics: DNS Lookup Page ......................................................... 118
Figure 10-11 Diagnostics: Memory Page ................................................................ 119
Figure 10-12. Diagnostics: Buffer Pools Page......................................................... 120
Figure 10-13. Diagnostics: Processes Page............................................................ 121
Figure 10-14. Real Time Clock Page....................................................................... 122
Figure 10-15. System Page ..................................................................................... 123
Figure 11-1. Email Statistics Page........................................................................... 126
Figure 11-2. Email Configuration Page.................................................................... 127
Figure 11-3. Command Line Interface Statistics Page ............................................ 129
Figure 11-4. Command Line Interface Configuration Page ..................................... 130
Figure 11-5. XML : Export Configuration Page........................................................ 132
Contents
EDS Device Servers User Guide 10
Figure 11-6. XML: Export Status Page .................................................................... 134
Figure 11-7. XML: Import Configuration Page ......................................................... 135
Figure 11-8. XML: Import Configuration from External File ..................................... 136
Figure 11-9. XML: Import from Filesystem .............................................................. 137
Figure 11-10. XML: Import Line(s) from Single Line Settings on the Filesystem ... 139
EDS Device Servers User Guide 11
1: Preface

Purpose and Audience

This guide describes how to install, configure, use, and update the EDS4100 4-Port,
EDS8PR 8-Port, EDS16PR 16-Port, and EDS32PR 32-Port Device Servers. It is for
users who will use the EDS to network-enable their serial devices.

Summary of Chapters

The remaining chapters in this guide include:
Chapter Description
2: Introduction
Main features of the EDS device servers and the applications for which
they are suited.
3: Installation: EDS4100
Instructions for getting the EDS4100 device server up and running.
Includes a description of hardware components.
4: Installation: EDS8PR,
EDS16PR and EDS32PR
Instructions for getting the EDS8PR, EDS16PR and EDS32PR device
server up and running. Includes a description of hardware components.
5: Getting Started
Instructions for starting DeviceInstaller and viewing current configuration
settings. Introduces methods of configuring the EDS.
6:Configuration Using the Web
Manager
Instructions for using the web interface to configure EDS device servers.
7: Network, Line, Tunnel, and
Terminal Settings
Instructions for using the web interface to configure network, serial line,
and tunnel settings.
8: Services Settings
Instructions for using the web interface to configure settings for DNS,
SNMP, FTP, and other services.
9: Security Settings
Instructions for using the web interface to configure SSH and SSL security
settings.
10: Maintenance and
Diagnostics
Instructions for using the web interface to maintain the EDS, view statistics,
files, and logs, and diagnose problems.
11: Advanced Settings
Instructions for using the web interface to configure email, CLI, and XML
settings.
12: Updating Firmware
Instructions for upgrading the EDS firmware.
A: Factory Default
Configuration
Quick reference of the EDS factory-default configuration settings.
B: Technical Specifications
Tables of technical data about the products...
1: Preface
EDS Device Servers User Guide 12
Chapter Description
C: Networking and Security
In-depth description of networking and network security as it relates to the
EDS device servers.
D: Technical Support
Information about contacting Lantronix Technical Support.
F: Compliance
Information about the products' compliance with regulatory standards.
G: Warranty
Provides information on the Lantronix warranty for the EDS.

Additional Documentation

The following guide is available on the product CD or the Lantronix Web site:
www.lantronix.com
.
Document Description
EDS Device Server Quick
Start Guide
Provides the steps for getting the EDS up and running.
EDS Device Server
Command Reference
Describes how to configure the EDS using Telnet or the serial
port and summarizes the CLI and XML configuration
commands.
Secure Com Port Redirector
User Guide
Provides information for using the Lantronix Windows-based
utility to create secure virtual com ports.
EDS Device Servers User Guide 13
2: Introduction
This chapter introduces the Lantronix EDS family of device servers. It provides an
overview of the products, lists their key features, and describes the applications for which
they are suited.
EDS is a unique, hybrid Ethernet terminal and multi-port device server product designed
to remotely access and manage virtually all of your IT/networking equipment and servers,
as well as edge devices such as medical equipment, kiosks, POS/retail terminals,
security equipment and much more.
EDS device servers contain all the components necessary to deliver full network
connectivity to virtually any kind of serial device, a reliable TCP/IP protocol stack, and a
variety of remote management capabilities. They boast an innovative design and run on
Lantronix’s leading-edge Evolution OS™, our powerful real-time networking operating
system that delivers an unprecedented level of intelligence and security to networked
equipment.
Delivering a data center-grade, programmable device computing and networking platform
for integrating “edge” equipment into the enterprise network, rack-mountable EDS models
are available in 8, 16, and 32 port configurations.

EDS4100 Overview

The EDS4100 is a compact, easy-to-use device server that gives you the ability to
network-enable asynchronous RS-232 and RS-422/485 serial devices. It can deliver fully
transparent RS-232/422 point-to-point connections and RS-485 multi-drop connections
without requiring modifications to existing software or hardware components in your
application.
Note: RS-485 circuits support 32 full-load devices or 128 quarter-load devices.
Each EDS4100 RS-485 port, however, counts as one device, leaving up to 31
full-load or 127 quarter-load devices that can be connected to the RS-485 circuit.
The EDS4100 device server supports the Power-over-Ethernet (PoE) standard.
With PoE, power is supplied to the EDS over the Ethernet cable, by either an
Ethernet switch or a midspan device. Being able to draw power through the
Ethernet cable eliminates power supply and cord clutter. It also allows the EDS to
be located in areas where power is not typically available.
Ports 1 through 4 support RS-232 devices.
Ports 1 and 3 also support RS-422/485 devices.
2: Introduction
EDS Device Servers User Guide 14
Figure 2-1. EDS4100 4 Port Device Server
Features
The following list summarizes the key features of the EDS4100.
Dual-purpose Ethernet terminal server and device server design
Includes four serial ports with hardware handshaking signals
Supports RS-232 and RS-422/485
Includes one RJ45 Ethernet port
Supports the IEEE 802.3af standard for Power-over-Ethernet (PoE)
8 MB Flash memory
32 MB Random Access Memory (RAM)
Based on Lantronix’s Evolution OS™
Supports secure data encryption by means of AES, SSH, or SSL sessions
Supports three convenient configuration methods (Web, command line, and
XML)
Print server functionality (LPR/LPD)

EDS8PR, EDS16PR, and EDS32PR Overview

The EDS8PR (8 serial ports), EDS16PR (16 serial ports), and EDS32PR (32 serial ports)
are compact easy-to-use, rack-mountable device servers that give you the ability to
network-enable asynchronous RS-232 serial devices. They provide fully transparent RS-
232 point-to-point connections without requiring modifications to existing software or
hardware components in your application.
2: Introduction
EDS Device Servers User Guide 15
Figure 2-2. EDS16PR Device Server
Features
The following list summarizes the key features of the EDS8PR, EDS16PR, and
EDS32PR.
Dual-purpose Ethernet terminal server and device server design
Includes 8 (EDS8PR), 16 (EDS16PR) or 32 (EDS32PR) serial ports with
hardware handshaking signals
Supports RS-232
Includes one RJ45 Ethernet port
8 MB Flash memory
32 MB Random Access Memory (RAM)
Based on Lantronix’s Evolution OS™
Includes a dedicated console port
Supports secure data encryption by means of AES, SSH, or SSL sessions
Supports three convenient configuration methods (Web, command line, and
XML)
Print server functionality (LPR/LPD)

Evolution OS™

EDS device servers incorporate Lantronix’s Evolution OS™. Key features of the
Evolution OS™ include:
Built-in Web server for configuration and troubleshooting from Web-based
browsers
CLI configurability
SNMP management
XML data transport and configurability
Really Simple Syndication (RSS) information feeds
Enterprise-grade security with SSL and SSH
2: Introduction
EDS Device Servers User Guide 16
Comprehensive troubleshooting tools
Web-Based Configuration and Troubleshooting
Built upon popular Internet-based standards, the EDS enables users to configure,
manage, and troubleshoot efficiently through a simplified browser-based interface that
can be accessed anytime from anywhere. All configuration and troubleshooting options
are launched from a well-organized, multi-page interface. Users can access all
functionality via a Web browser, allowing them flexibility and remote access. As a result,
users can enjoy the twin advantages of decreased downtime (based on the
troubleshooting tools) and the ability to implement configuration changes easily (based
on the configuration tools).
In addition, users can load their own Web pages onto the EDS to facilitate monitoring and
control of their own serial devices that are attached to the EDS.
Command-Line Interface (CLI)
Making the edge-to-enterprise vision a reality, the EDS with the Evolution OS™ uses
industry-standard tools for configuration, communication, and control. For example, the
Evolution OS™ uses a Cisco
®
-like command line interface (CLI) whose syntax is very
similar to that used by data center equipment such as routers and hubs.
SNMP Management
The EDS supports full SNMP management, making it ideal for applications where device
management and monitoring are critical. These features allow networks with SNMP
capabilities to correctly diagnose and monitor EDS device servers.
XML-Based Architecture and Device Control
XML is a fundamental building block for the future growth of M2M networks. The EDS
supports XML-based configuration setup records that makes device configuration
transparent to users and administrators. The XML is easily editable with a standard text
or XML editor.
Really Simple Syndication (RSS)
The EDS supports Really Simple Syndication (RSS), a rapidly emerging technology for
streaming and managing on-line content. RSS feeds all the configuration changes that
occur on the device. The feed is then read (polled) by an RSS aggregator. More powerful
than simple email alerts, RSS uses XML as an underlying Web page transport and adds
intelligence to the networked device while not taxing already overloaded email systems.
Enterprise-Grade Security
Without the need to disable any features or functionality, the Evolution OS™ provides the
EDS the highest level of security possible. This ‘data center grade’ protection ensures
that each device on the M2M network carries the same level of security as traditional IT
networking equipment in the corporate data center.
With built-in SSH and SSL, secure communications can be established between the EDS
serial ports and the remote end device or application. By protecting the privacy of serial
data being transmitted across public networks, users can maintain their existing
2: Introduction
EDS Device Servers User Guide 17
investment in serial technology, while taking advantage of the highest data-protection
levels possible.
SSH and SSL can:
Verify the data received came from the proper source
Validate that the data transferred from the source over the network has not
changed when it arrives at its destination (shared secret and hashing)
Encrypt data to protect it from prying eyes and nefarious individuals
Provide the ability to run popular M2M protocols over a secure SSH connection
In addition to keeping data safe and accessible, the EDS has robust defenses to hostile
Internet attacks such as denial of service (DoS), which can be used to take down the
network. Moreover, the EDS cannot be used to bring down other devices on the network.
The EDS can be used with Lantronix’s Secure Com Port Redirector (SCPR) to encrypt
COM port-based communications between PCs and virtually any electronic device.
SCPR is a Windows application that creates a secure communications path over a
network between the computer and serial-based devices that are traditionally controlled
via a COM port. With SCPR installed at each computer, computers that were formerly
“hard-wired” by serial cabling for security purposes or to accommodate applications that
only understood serial data can instead communicate over an Ethernet network or the
Internet.
The EDS also supports a variety of popular cipher technologies including:
Advanced Encryption Standard (AES)
Triple Data Encryption Standard (3DES)
RC4
Hashing algorithms such as Secure Hash Algorithm (SHA-1) and MD5
Troubleshooting Capabilities
The EDS offers a comprehensive diagnostic toolset that lets you troubleshoot problems
quickly and easily. Available from the Web Manager, CLI, and XML interfaces, the
diagnostic tools let you:
View critical hardware, memory, MIB-II, buffer pool, and IP socket information.
Perform ping and traceroute operations.
Conduct forward or backup DNS lookup operations.
View all processes currently running on the EDS, including CPU utilization and
total stack space available.
2: Introduction
EDS Device Servers User Guide 18

Applications

EDS device servers deliver simple, reliable, and cost-effective network connectivity for all
your serial devices and address the growing need to connect individual devices to the
network over industry-standard Ethernet connections. The EDS is ideal for a variety of
applications, including:
Building automation/security
Industrial automation
Medical/healthcare
Retail automation/point-of-sale
Console management
Traffic management
Building Automation/Security
Automating, managing, and controlling many different aspects of a building is possible
with the EDS. It can overcome the hurdle of stand-alone networks or individual control
systems that are not able to communicate with each other, and not able to share vital
data, in a cost effective way.
The EDS can also be used to manage equipment and devices centrally over a new or
existing Ethernet network to improve the safety and comfort of building occupants, while
lowering heating, ventilating, air conditioning (HVAC), lighting, and overall energy
operating costs through centralized management and monitoring.
Industrial Automation
Today’s manufacturing facilities face the common challenges of productivity
improvements, inventory management, and quality control. From warehouse to
automotive environments, the need to attach the following devices, whether new or
legacy, continues to grow:
Programmable Logic Controllers (PLCs), Computer Numeric Control and Direct
Numeric Control (CNC/DNC) equipment, process and quality-control equipment
Pump controllers
Bar-code readers and scanners, operator displays, scales, and weighing stations
Printers, machine-vision systems, and other types of manufacturing equipment
The EDS is well suited to deliver network connectivity to all of these devices.
Medical/Healthcare
Hospitals, clinics, and laboratories face rapidly growing needs to deliver medical
information accurately, quickly, and easily, whether at bedside, the nurse’s station, or
anywhere in the facility. The goal to improve healthcare services, however, is balanced
with the need to keep the bottom line from exceeding already constrained budgets.
The EDS can network enable medical equipment and devices using the hospital’s
existing Ethernet network to improve patient care and slash operating costs. This allows
2: Introduction
EDS Device Servers User Guide 19
medical staff members to easily monitor and control equipment over the network, whether
it is located at the point of care, in a laboratory, or somewhere else in the building, all
resulting in improved quality of service and reduced operational costs.
Retail Automation/Point-of-Sale
Having the right solution in the store to manage deliveries, track orders, and keep pricing
current are all improvements that the EDS can offer to make retail operations more
successful. From big to small, one store to thousands of outlets, the EDS can empower
point-of-sale (POS) devices to share information across the network effectively.
With the EDS, retailers can increase and streamline productivity quickly and easily by
network-enabling serial devices like card swipe readers, bar-code scanners, scales, cash
registers, and receipt printers.
Terminal Server/Console Management
Remote offices can have routers, PBXs, servers and other networking equipment that
require remote management from the corporate facility. The EDS easily attaches to the
serial ports on a server, Private Branch Exchange (PBX), or other networking equipment
to deliver central, remote monitoring and management capability.
With the menu system on the EDS, connections to the console ports of the attached
devices as well as Ethernet hosts, such as Unix servers or another EDS, can easily be
picked from a user-defined menu. This allows console ports across multiple networks to
be accessed from one EDS.
Traffic Management
With the ubiquity of Ethernet networks, managing cities over Ethernet is now within
reach. The EDS provides an easy conversion from serial ports on traffic cameras,
billboards, and traffic lights to Ethernet. The EDS obviates the need for long-haul
modems and enables the management of traffic equipment over the network.
EDS Device Servers User Guide 20
3: Installation: EDS4100
This chapter describes how to install the EDS4100 device server.

Package Contents

Your EDS4100 package includes the following items:
One EDS4100 device server
One DB9F-to-DB9Fnull modem cable
One product CD that includes this User Guide, the Command Reference, and the
Quick Start guide.
A printed Quick Start guide
Your package may also include a power supply.

User-Supplied Items

To complete your EDS4100 installation, you need the following items:
RS-232 and/or RS-422/485 serial devices that require network connectivity:
Each EDS4100 serial port supports a directly connected RS-232 serial
device.
Ports 1 and 3 also support RS-422/485 and can accommodate 31 full-load
RS-485 multi-drop devices or 127 quarter-load RS-485 multi-drop devices
per port, for a total of 62 full-load or 254 quarter-load devices.
A serial cable for each serial device to be connected to the EDS4100. One end of
the cable must have a female DB9 connector to connect to the EDS4100 serial
port. The connector on the other end must be configured for your serial device.
Note: To connect an EDS4100 serial port to another DTE device, you will need a
null modem cable, such as the one supplied in your EDS4100 package. To
connect the EDS4100 serial port to a DCE device, you will need a straight-
through (modem) cable.
An available connection to your Ethernet network and an Ethernet cable.
A working power outlet if the unit will be powered from an AC outlet.
3: Installation: EDS4100
EDS Device Servers User Guide 21

Identifying Hardware Components

Figure 3-1 shows the hardware components on the front of the EDS4100. Figure 3-2
shows the hardware components on the back of the EDS4100.
Figure 3-1. Front View of the EDS4100
Figure 3-2. Back View of the EDS4100
The bottom of the EDS4100 (not shown) has a product information label. This label
contains the following information:
Bar code
Serial number
Product ID (name)
Product description
Hardware address (also referred to as Ethernet or MAC address)
Agency certifications
3: Installation: EDS4100
EDS Device Servers User Guide 22
Serial Ports
The front of the EDS4100 has four male DB9 serial ports. These ports allow you to
connect up to four standard serial devices:
All four serial ports support RS-232 devices. See Figure 3-3 for pin assignments.
Serial ports 1 and 3 also support RS-422 and RS-485 serial devices.
See Figure 3-4 for pin assignments.
All four serial ports are configured as DTE and support baud rates up to 230,400 baud.
Figure 3-3. RS-232 Serial Port Pins (Serial Ports 1, 2, 3, 4)
Figure 3-4. RS-422/RS-485 Serial Port Pins
Note: Multi-drop connections are supported in 2-wire mode only.
RS-422/485 4-wire Pin Assignments
(Serial Ports 1 and 3)
RS-485 2-wire Pin Assignments
(Serial Ports 1 and 3)
3: Installation: EDS4100
EDS Device Servers User Guide 23
Ethernet Port
The back panel of the EDS4100 provides an RJ45 Ethernet port. This port can connect to
an Ethernet (10 Mbps) or Fast Ethernet (100 Mbps) network. The Speed LED on the
back of the EDS4100 shows the connection of the attached Ethernet network. The
EDS4100 can be configured to operate at a fixed Ethernet speed and duplex mode (half-
or full-duplex) or auto-negotiate the connection to the Ethernet network.
Terminal Block Connector
The back of the EDS4100 has a terminal block screw connector for attaching to an
appropriate power source, such as those used in automation and manufacturing
industries. The terminal block connector supports a power range from 42 VDC to
56 VDC. It can be used with the EDS4100’s barrel power connector and PoE capabilities
as a redundant power source to the unit.
Figure 3-5. Terminal Block Connector Pin Assignments
Pin Signal
Top V+
Middle V-
Bottom Ground
LEDs
Light-emitting diodes (LEDs) on the front and back panels show status information.
Back panel. Each serial port has a Transmit and a Receive LED. The Ethernet
connector has Speed and Activity LEDs. In addition, the back panel has a Power
LED and a Status LED.
Front panel. The front panel has a green Power LED.
The table below describes the LEDs on the back of the EDS4100.
Figure 3-6 .Back Panel LEDs
LED Description
Transmit (green) Blinking = EDS is transmitting data on the serial port.
Receive (yellow) Blinking = EDS is receiving data on the serial port.
Power (green) On = EDS is receiving power.
Status (yellow) Fast blink = initial startup (loading OS).
Slow blink (once per second) = operating system startup.
On = unit has finished booting.
On = EDS is connected to a 100 Mbps Fast Ethernet network. Speed (yellow)
Off = EDS is connected to a 10 Mbps Ethernet network.
Activity (green) Blink = EDS is sending data to or receiving data from the Ethernet
network.
3: Installation: EDS4100
EDS Device Servers User Guide 24
Reset Button
The reset button is on the back of the EDS4100, to the left of the power connector.
Pressing this button reboots the EDS4100 and terminates all data activity occurring on
the serial and Ethernet ports.

Physically Installing the EDS4100

Finding a Suitable Location
Place the EDS4100 on a flat horizontal or vertical surface. The EDS4100 comes
with mounting brackets installed for vertically mounting the unit, for example, on
a wall.
If using AC power, avoid outlets controlled by a wall switch.
Connecting the EDS4100
Observe the following guidelines when attaching serial devices:
All four EDS4100 serial ports support RS-232 devices.
Alternatively, ports 1 and 3 support RS-422/485 devices.
To connect an EDS4100 serial port to another DTE device, use a null modem
cable.
To connect the EDS4100 serial port to a DCE device, use a straight-through
(modem) cable.
To connect the EDS4100 to one or more serial devices, use the following procedure.
Note: We recommend you power off the serial devices that will be connected to
the EDS4100.
1. For each serial device you want to connect, attach a serial cable between the
EDS4100 and your serial device.
2. Connect an Ethernet cable between the EDS4100 Ethernet port and your Ethernet
network.
3. Use one or more of the following methods to power-up the EDS4100:
PoE method: Power is supplied to the EDS4100 over the Ethernet cable by
either an Ethernet switch or a midspan device.
Barrel power connector: Insert the round end of the supplied power cord into
the barrel power connector on the back of the EDS4100. Plug the other end into
an AC wall outlet. The barrel power connector supports a power range of 9 to 30
VDC.
Terminal block connector: Attach the power source to the terminal block
connector on the back of the EDS4100. The terminal block connector supports a
power range of 42 VDC to 56 VDC.
3: Installation: EDS4100
EDS Device Servers User Guide 25
The EDS4100 powers up automatically. After power-up, the self-test begins and
Evolution OS™ starts.
Note: These power-up methods can be used together to provide a redundant
power source to the unit.
4. Power up all connected serial devices.
Figure 3-7. Example of EDS4100 Connections
EDS Device Servers User Guide 2
6
4: Installation: EDS8PR, EDS16PR and EDS32PR
This chapter describes how to install the EDS8PR, EDS16PR and EDS32PR device
servers.

Package Contents

Your EDS package includes the following items:
One EDS device server (EDS8PR, EDS16PR or EDS32PR)
One RJ45-to-DB9F serial cable
One product CD that includes this User Guide, the Command Reference, and the
Quick Start guide.
A printed Quick Start guide
Your package may also include a power supply.

User-Supplied Items

To complete your EDS8/16/32PR installation, you need the following items:
RS-232 serial devices that require network connectivity. Each EDS8/16/32PR
serial port supports a directly connected RS-232 serial device.
A serial cable for each serial device to be connected to the EDS8/16/32PR. All
devices attached to the device ports support the RS-232C (EIA-232) standard.
Category 5 cabling with RJ45 connections is used for the device port
connections.
Note: To connect an EDS8/16/32PR serial port to a DTE device, you
need a DTE cable, such as the one supplied in your EDS8/16/32PR
package, or an RJ45 patch cable and DTE adapter. To connect the
EDS8/16/32PR serial port to a DCE device, you need a DCE (modem)
cable, or an RJ45 patch cable and DTE adapter. For a list of the
Lantronix cables and adapters you can use with the EDS8/16/32PR, see
E: Lantronix Cables and Adapters.
An available connection to your Ethernet network and an Ethernet cable.
A working power outlet if the unit will be powered from an AC outlet.
4: Installation: EDS8PR, EDS16PR and EDS32PR
EDS Device Servers User Guide 27

Identifying Hardware Components

Figure 3-1 shows the hardware components on the front of the EDS16PR. Figure 3-2
shows the hardware components on the back of the EDS16PR.
Figure 4-1. Front View of the EDS16PR
Figure 4-2. Back View of the EDS16PR
The bottom of the EDS8/16/32PR has a product information label. This label contains the
following information:
Bar code
Serial number
4: Installation: EDS8PR, EDS16PR and EDS32PR
EDS Device Servers User Guide 28
Product ID (name)
Product description
Hardware address (also referred to as Ethernet or MAC address)
Agency certifications
Serial Ports
The EDS8PR has 8 serial ports, the EDS16PR has 16 serial ports, and the EDS32PR
has 32 serial ports. All serial ports are configured as DTE and support baud rates up to
230,400 baud.
Figure 4-3. RJ45 Serial Port
Ethernet Port
The back panel of the EDS8/16/32PR provides an RJ45 Ethernet port. This port can
connect to an Ethernet (10 Mbps) or Fast Ethernet (100 Mbps) network. The Speed LED
on the back of the EDS8/16/32PR shows the connection of the attached Ethernet
network. The EDS8/16/32PR can be configured to operate at a fixed Ethernet speed and
duplex mode (half- or full-duplex) or auto-negotiate the connection to the Ethernet
network.
LEDs
Light-emitting diodes (LEDs) on the front and back panels show status information.
Back panel. Each serial port has a Transmit and a Receive LED. The Ethernet
connector has a Speed and an Activity LEDs. In addition, the back panel has a
Power LED and a Status LED.
Front panel. The front panel has a green Power LED.
The table below describes the LEDs on the back of the EDS.
Back Panel LEDs
LED Description
Transmit (green) Blinking = EDS is transmitting data on the serial port.
Receive (yellow) Blinking = EDS is receiving data on the serial port.
4: Installation: EDS8PR, EDS16PR and EDS32PR
EDS Device Servers User Guide 29
LED Description
Power (green) On = EDS is receiving power.
Status (yellow) Fast blink = initial startup (loading OS).
Slow blink (once per second) = operating system startup.
On = unit has finished booting.
On = EDS is connected to a 100 Mbps Fast Ethernet network. Speed (yellow)
Off = EDS is connected to a 10 Mbps Ethernet network.
Activity (green) Blink = EDS is sending data to or receiving data from the Ethernet
network.
Reset Button
The reset button is on the back of the EDS8/16/32PR, to the left of the power connector.
Pressing this button for 2-to-3 seconds reboots the EDS8/16/32PR and terminates all
data activity occurring on the serial and Ethernet ports.

Physically Installing the EDS8/16/32PR

Finding a Suitable Location
You can install the EDS8/16/32PR either in an EIA-standard 19-inch rack (1U
tall) or as a desktop unit.
If using AC power, avoid outlets controlled by a wall switch.
Connecting the EDS8/16/32PR
All serial ports support RS-232 devices.
To connect the EDS8/16/32PR to one or more serial devices, use the following
procedure:
Note: We recommend you power off the serial devices that will be connected to
the EDS8/16/32PR.
1. For each serial device you want to connect, attach a CAT 5 serial cable between the
EDS8/16/32PR and your serial device. For a list of cables and adapters you can use
with the EDS8/16/32PR, see E: Lantronix Cables and Adapters.
2. Connect an Ethernet cable between the EDS8/16/32PR Ethernet port and your
Ethernet network.
3. Insert the supplied power cord into the power connector on the back of the
EDS8/16/32PR. Plug the other end into an AC wall outlet. After power-up, the self-
test begins.
4. Power up all connected serial devices.
4: Installation: EDS8PR, EDS16PR and EDS32PR
EDS Device Servers User Guide 30
Figure 4-4. Example of EDS16PR Connections
Loading...
+ 145 hidden pages