Land Pride APS1586, APS1560, APS1572, APS1548 User Manual

4 (1)

Table of Contents

All Purpose Seeder

APS1548, APS1560, APS1572 & APS1586

APS1586

25982

24932 APS1548

313-354M

Operator’s Manual

!

Read the Operator’s manual entirely. When

you see this symbol, the subsequent

instructions and warnings are serious - follow

 

without exception. Your life and the lives of

 

others depend on it!

 

 

© Copyright 2008 Pr inted

5/13/08

Cover photo may show optional equipment not supplied with standard unit.

Table of Contents

Important Safety Information . . . . . . . . . . .1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look For The Safety Alert Symbol . . . . . . . . . . . . . 1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . .6

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 6

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 6

Serial Number Plate . . . . . . . . . . . . . . . . . . . . . 6

Further Assistance . . . . . . . . . . . . . . . . . . . . . . 6

Section 1: Assembly & Set-up . . . . . . . . .7

Tractor Requirements . . . . . . . . . . . . . . . . . . . . .

. 7

Sling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. 7

Dealer Preparations . . . . . . . . . . . . . . . . . . . . . . .

. 7

Pre-Assembly Checklist . . . . . . . . . . . . . . . . . . . .

. 7

Mud Scraper Installation (Optional) . . . . . . . . . . .

. 7

Front Mud Scrapers . . . . . . . . . . . . . . . . . . . .

. 8

Rear Mud Scraper . . . . . . . . . . . . . . . . . . . . . .

. 8

Special Instructions For Packer Roller . . . . . .

. 9

Special Instructions For Spike Roller . . . . . . .

10

Section 2: Operating Instructions . . . . . .11

Operating Check List . . . . . . . . . . . . . . . . . . . . . . 11

Tractor Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Filling the Seed Box . . . . . . . . . . . . . . . . . . . . . . . 11

How the Seeder Works . . . . . . . . . . . . . . . . . . . . 12

Operating the Seeder . . . . . . . . . . . . . . . . . . . . . 12

Parking the Seeder . . . . . . . . . . . . . . . . . . . . . . . 13

General Operating Instructions . . . . . . . . . . . . . . 13

Section 3: Adjustments . . . . . . . . . . . . . .14

Front Roller Angle Adjustment . . . . . . . . . . . . . . . 14 Mud Scraper Adjustment (Optional) . . . . . . . . . . . 14 Front Mud Scrapers . . . . . . . . . . . . . . . . . . . . . 14 Rear Mud Scrapers . . . . . . . . . . . . . . . . . . . . . 14 Special Instructions for Spike Rollers . . . . . . . 14 Drive Chain Engagement . . . . . . . . . . . . . . . . . . . 15 Speed Change Sprocket . . . . . . . . . . . . . . . . . . . 16 High Range Set-up . . . . . . . . . . . . . . . . . . . . . 16 Low Range Set-up . . . . . . . . . . . . . . . . . . . . . . 16 Seeding Adjustments . . . . . . . . . . . . . . . . . . . . . . 17 Seed Rate Charts (English) . . . . . . . . . . . . . . . . . 18 Seed Rate Charts (Metric) . . . . . . . . . . . . . . . . . . 20

Section 4: Maintenance & Lubrication . .22

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Roller Chains . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Cleaning and Storing . . . . . . . . . . . . . . . . . . . . . . 22

Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . 23

Feed Cup Drive Sprocket Square Bore . . . . . . 23

Front Roller Bearings . . . . . . . . . . . . . . . . . . . 23

Rear Roller Bearings . . . . . . . . . . . . . . . . . . . . 24

Roller Chains . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Section 5: Specifications & Capacities .25

Section 6: Features and Benefits . . . . . .26

Section 7: Troubleshooting . . . . . . . . . .27

Section 8: Appendix . . . . . . . . . . . . . . . .28

© Copyright 2008 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Operator should be familiar with all functions of the unit.

Operate implement from the driver’s seat only.

Make sure all guards and shields are in place and secured before operating the implement.

Do not leave tractor or implement unattended with engine running.

Dismounting from a moving tractor could cause serious injury or death.

Do not stand between the tractor and implement during hitching.

Keep hands, feet, and clothing away from power-driven parts.

Wear snug fitting clothing to avoid entanglement with moving parts.

Turning tractor too tight may cause implement to ride up on wheels. This could result in injury or equipment damage.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a po-

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.tential hazard to personal safety involved and extra

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

! DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

! WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

! CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

For Your Protection

Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

Lower machine to ground, put tractor in park, turn off engine, and remove the key.

Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

REMOVE

5/13/08

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

1

Table of Contents

Important Safety Information

Land Pride

These are common practices that may or may not be applicable to the products described in this manual.

Use Safety

Lights and Devices

Slow moving tractors, selfpropelled equipment, and towed implements can create a hazard when driven on public roads. They are difficult to see, especially at night.

Flashing warning lights and turn signals are recommended whenever driving on public roads. Use lights and devices provided with implement.

Transport

Machinery Safely

Comply with state and local laws.

Maximum transport speed for implement is 20 mph. DO NOT EXCEED. Never travel at a speed which does not allow adequate control of steering and stopping. Some rough terrain require a slower speed.

Sudden braking can cause a towed load to swerve and upset. Reduce speed if towed load is not equipped with brakes.

Use the following maximum speed - tow load weight ratios as a guideline:

20 mph when weight is less than or equal to the weight of tractor.

10 mph when weight is double the weight of tractor.

IMPORTANT: Do not tow a load that is more than double the weight of tractor.

Use A Safety Chain

A safety chain will help control drawn machinery should it separate from the tractor drawbar.

Use a chain with the strength rating equal to or greater than the gross weight of the towed machinery.

Attach the chain to the tractor drawbar support or other specified anchor location. Allow only enough slack in the chain to permit turning.

Do not use safety chain for towing.

Practice Safe Maintenance

Understand procedure before doing work. Use proper tools and equipment, refer to Operator’s Manual for additional information.

Work in a clean dry area.

Lower the implement to the ground, put tractor in park, turn off engine, and remove key before performing maintenance.

Allow implement to cool completely.

Do not grease or oil implement while it is in operation.

Inspect all parts. Make sure parts are in good condition & installed properly.

Remove buildup of grease, oil or debris.

Remove all tools and unused parts from implement before operation.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Prepare for Emergencies

Be prepared if a fire starts.

Keep a first aid kit and fire extinguisher handy.

Keep emergency numbers for doctor, ambulance, hospital and fire department near phone.

911

Wear

Protective Equipment

Protective clothing and equipment should be worn.

Wear clothing and equipment appropriate for the job. Avoid loose fitting clothing.

Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable hearing protection such as earmuffs or earplugs.

Operating equipment safely requires the full attention of the operator. Avoid wearing radio headphones while operating machinery.

Keep Riders

Off Machinery

Riders obstruct the operator’s view, they could be struck by foreign objects or thrown from the machine.

Never allow children to operate equipment.

Tire Safety

Tire changing can be dangerous and should be preformed by trained personnel using the correct tools and equipment.

When inflating tires, use a clip-on chuck and extension hose long enough to allow you to stand to one side and NOT in front of or over the tire assembly. Use a safety cage if available.

When removing and installing wheels, use wheel handling equipment adequate for the weight involved.

Avoid High

Pressure Fluids Hazard

Escaping fluid under pressure can penetrate the skin causing serious injury.

Avoid the hazard by relieving pressure before disconnecting hydraulic lines or performing work on the system.

Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before applying pressure to the system.

Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks.

Wear protective gloves and safety glasses or goggles when working with hydraulic systems.

If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be treated within a few hours or gangrene may result.

Handle

Chemicals Properly

Protective clothing should be worn.

Handle all chemicals with care.

Follow instructions on container label.

Agricultural chemicals can be dangerous. Improper use can seriously injure persons, animals, plants, soil, and property.

Inhaling smoke from any type of chemical fire is a serious health hazard.

Store or dispose of unused chemicals as specified by the chemical manufacturer.

5/13/08

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

3

Table of Contents

Important Safety Information

Land Pride

Safety Labels

Your All Purpose Seeder comes equipped with all safety labels in place. They were designed to help you safely operate your implement. Read and follow their directions.

1.Keep all safety labels clean and legible.

2.Replace all damaged or missing labels. To order new labels go to your nearest Land Pride dealer or visit our dealer locator at landpride.com.

3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as

24932

specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request.

4.Refer to this section for proper label placement. To install new labels:

a.Clean the area the label is to be placed.

b.Spray soapy water on the surface where the label is to be placed.

c.Peel backing from label. Press firmly onto the surface.

d.Squeeze out air bubbles with the edge of a credit card.

 

24934

 

4

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder

313-354M

818-858C

warning: General Information

818-055C

SMV: Slow Moving Vehicle

5/13/08

Land Pride APS1586, APS1560, APS1572, APS1548 User Manual

Land Pride

Table of Contents

Important Safety Information

24934

24938

24934

838-111C

DANGER: Keep away, Moving Parts

818-543C

DANGER: Guard Missing

(Beneath Guard)

 

KEEP AWAY

 

 

 

818-254C

 

 

 

DANGER: Rotating Roller Hazard

 

 

25512

 

 

5/13/08

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder

313-354M

5

Table of Contents

Introduction

Land Pride welcomes you to the growing family of new product owners.

This All Purpose Seeder has been designed with care and built by skilled workers using quality materials. Proper assembly, maintenance and safe operating practices will help you get years of satisfactory use from the machine.

Application

The APS1548, APS1560, APS1572 & APS1586 All Purpose Seeders are excellent combination planting and cultivation tools for golf courses, school systems, municipalities, rental yards, construction companies, sports fields, and college campuses. Their narrower widths make them effective in seeding applications on residential lots, grassy medians, grassy parkings or right-of- ways adjacent to sidewalks, community parks, sporting facilities, and golf courses. Unlike wider models of seeders these units will do a more effective job of planting in areas where undulations, moguls, and depressions are prevalent.

The seed box is equipped with our standard fluted seed cups and an agitator enabling highly accurate and uniform delivery of most turf grass seeds as well as a wide variety of other seeds ranging from alfalfa to peas. The spiked front rollers can be adjusted for more or less “crab-action cultivation” making them an ideal choice for opening up and planting in hard or thatchy soil profiles.

See “Section 5: Specifications & Capacities” on page 25 and “Section 6: Features and Benefits” on page 26 for additional product information.

Using This Manual

This Operator’s Manual is designed to help familiarize you with safety, assembly, operation, adjustments, troubleshooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.

The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual contact your authorized dealer. Manuals can also be downloaded, free-of-charge from our website at www.landpride.com or printed from the Land Pride Service & Support Center by your dealer.

Terminology

“Right” or “Left” as used in this manual is determined by facing the direction the machine will operate while in use unless otherwise stated.

Definitions

IMPORTANT: A special point of information related to its preceding topic. Land Pride’s intention is that this information should be read and noted before continuing.

NOTE: A special point of information that the operator must be aware of before continuing.

Owner Assistance

The Warranty Registration card should be filled out by the dealer at the time of purchase. This information is necessary to provide you with quality customer service.

If customer service or repair parts are required contact a Land Pride dealer. A dealer has trained personnel, repair parts and equipment needed to service the All Purpose Seeder.

The parts on your APS1548 or APS1572 seeder have been specially designed and should only be replaced with genuine Land Pride parts. Therefore, should your seeder require replacement parts go to your Land Pride Dealer.

Serial Number Plate

For prompt service always use the serial number and model number when ordering parts from your Land Pride dealer. Be sure to include your serial and model numbers in correspondence also. Refer to Figure 1 for the location of your serial number plate.

24940

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new All Purpose Seeder. If for any reason you do not understand any part of this manual or are not satisfied with the service received, the following actions are suggested:

1.Discuss the matter with your dealership service manager making sure he is aware of any problems you may have and that he has had the opportunity to assist you.

2.If you are still not satisfied, seek out the owner or general manager of the dealership, explain the problem and request assistance.

3.For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address lpservicedept@landpride.com

6

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Land Pride

Table of Contents

Section 1: Assembly & Set-up

Tractor Requirements

Tractor horse power and hitch category should be within the range noted below. Tractors outside the horsepower range must not be used.

Tractor Horse Power Rating

APS1548, APS1560 & APS1572 . . . . . . . . . . . 65 HP APS1586 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 HP

Hitch Category

APS1548, APS1560 & APS1572 . . . . . . . . . . . . Cat. I APS1586 . . . . . . . . . . . . . . . . . . . . . . . . . . . Cat. I & II

Make certain tractor’s 3-point lifting capacity and weight is capable of lifting and controlling the seeder under all operating conditions. Refer to “Specifications & Capacities” on page 25 for seeder weight.

NOTE: Ballast may need to be added to your tractor to maintain steering control. Refer to your tractor’s operator manual to determine if additional ballast is needed.

The lower 3-Point arms must be stabilized to prevent side-to-side movement. Most tractors have sway blocks or adjustable chains for this purpose.

Sling Bracket

Refer to Figure 1-1:

The sling brackets allow points at each end to hook a chain for lifting the unit. When hooking a chain to the sling brackets, be certain to either use a spreader bar on the chain or use a long chain to prevent bending the sling brackets.

24932

Dealer Preparations

This All Purpose Seeder has been assembled at the factory. Some preparation will be necessary to attach the seeder to the customer’s tractor. Make sure the intended tractor conforms to “Tractor Requirements”.

Pre-Assembly Checklist

Check

Reference

 

 

All major frame components

Operator’s

 

Manual

 

 

Location of fasteners and pins.

Operator’s

NOTE: All hardware from the factory has

Manual

been installed in the location where it will

 

be used. If a part is temporarily removed

 

for assembly reasons, remember where

 

it goes. Keep parts separated.

 

 

 

Be sure the part gets used in the correct

Parts

location. Use parts manual to identify

Manual

location of parts that have been removed

 

and are unsure where to replace them.

 

By double checking while you assemble,

 

you will lessen the chance of using a bolt

 

incorrectly that may be needed later.

 

 

 

All working parts are moving freely, bolts

Operator’s

are tight and cotter pins are spread.

Manual

 

 

All grease fittings are in place and

Section 4

lubricated.

Page 23

 

 

Proper tension and alignment on all

Section 4

drive chains.

Page 22

 

 

Safety decals are correctly located and

Pages

legible. Replace if damaged.

4 & 5

 

 

Sling Brackets

Figure 1-1

5/13/08

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

7

Table of Contents

Section 1: Assembly & Set-up

Land Pride

Mud Scraper Installation (Optional)

Optional mud scrapers are available from your local Land Pride dealer. A scraper bundle consists of one rear roller scraper and two front roller scrapers and are identified by the rear roller type and seeder planting width.

 

Land Pride Mud Scrapers

Part No.

Part Description

 

 

APS1548

 

313-431A

SPIKE SCRAPER BUNDLE . . . S/N 567003+

313-432A

PACKER SCRAPER BUNDLE . S/N 567003+

APS1560

 

313-458A

SPIKE SCRAPER BUNDLE

313-459A

PACKER SCRAPER BUNDLE

APS1572

 

313-429A

SPIKE SCRAPER BUNDLE. . . . S/N 547969+

313-430A

PACKER SCRAPER BUNDLE . . S/N 547969+

APS1586

 

313-449A

SPIKE SCRAPER BUNDLE

313-453A

PACKER SCRAPER BUNDLE

 

 

Refer to “Torque Values Chart For Common Bolt Size” on page 28 when tightening hardware.

Front Mud Scrapers

Refer to Figure 1-4:

IMPORTANT: Some units will not accept a Mud Scraper attachment. Please be sure of your serial number to verify.

NOTE: Do not tighten bolts (#4 & #5) until after adjustments have been made. See “Mud Scraper Adjustment (Optional)” on page 14 for instructions.

1.Attach spike scrapers (#3) to scraper hangers (#2) with 3/8"-16 x 1 1/4" GR5 round head square neck bolts (#5) and hex flange lock nuts (#6). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

2.Attach scraper hangers (#2) to the front rollers with four 3/8"-16 x 1" GR5 hex head cap screws (#4), 3/8" lock washers (#8) and 3/8" flat washers (#7). Draw nuts up snug, do not tighten until after completing adjustments in Section 3.

Rear Mud Scraper

Refer to Figure 1-5 on page 9:

The instructions below apply to both the rear packer roller and rear spike roller.

1.Lower rear roller to ground level to compress spring (#6). Adjust 3-point lift height to make sure roller arm (#1) is positioned so that there is space between the arm and stop blocks located above and below the arm.

2.Support seeder frame at this height to keep seeder frame from creeping lower during assembly.

3.Shut tractor engine off and engage parking brake.

4.Attach vice grips tightly to the spring rod and tight against the spring rod guide bar to retain spring compression.

5.Loosen bearing set collar screw (#2) and remove lock nut (#3), cap screws (#4) and lock washers (#5). Keep hardware for reuse.

 

vel

 

ra

 

DirectionT

 

of

Left Hand Roller

Right hand Roller

 

25607

Front Mud Scraper Installation

Figure 1-4

8

APS1548, APS1560, APS1572 & APS1586 All Purpose Seeder 313-354M

5/13/08

Loading...
+ 22 hidden pages