Kuppersbusch USA EKI956UL User Manual

0 (0)
EN GUIDE TO INSTALLATION AND USE
Cooking Hob
IIMMPPOORRTTAANNTT
: Save this manual for the local electrical inspector’s use.
IINNSSTTAALLLLEERR
: Please leave this manual with the unit for the owner.
OOWWNNEERR
IIMMPPOORRTTAANNTT
: Local codes vary. Installation, electrical connections and
grounding must comply with all applicable codes.
EKI956UL
99637771_A_EN.qxp 19/07/2005 11:45 Page 1
2
IMPORTANT SAFETY INSTRUCTIONS
1
- Proper Installation - Be sure your appliance is properly grounded and installed
by a qualified technician.
2
- Never Use your Appliance for Warming or Heating the Room.
3
- Do Not Leave Children Alone - Children should not be left alone or unattended
in an area where appliance is in use. They should never be allowed to sit or stand
on any part of the appliance.
4
- Wear Proper Apparel - Loose-fitting or hanging garments should never be worn
while using the appliance.
5
- User Servicing - Do not repair or replace any part of the appliance unless
specifically recommended in the manual. All other servicing should be referred to a
qualified technician.
6
- Storage in or on Appliance - Flammable materials should not be stored near
surface units.
7
- Do Not Use Water on Grease Fires - Smother fire or flame or use dry chemical or
foam-type extinguisher.
8
- Use Only Dry Potholders - Moist or damp potholders on hot surfaces may result
in burns from steam. Do not let potholder touch hot heating elements. Do not use
a towel or other bulky cloth.
9
- Use Proper Pan Size - This appliance is equipped with several, differently sized,
induction elements. Select utensils having flat bottoms, large enough to cover the
surface unit heating element. Proper size pots and pans will also improve efficiency.
10
- DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS - Surface units may
be hot even though they are dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch, or let clothing or other
flammable materials contact surface units or areas near units until they have had
sufficient time to cool.
11
. Do Not Heat Unopened Food Containers - Build-up of pressure may cause
container to burst and result in injury.
12
. Never Leave Surface Units Unattended at High Heat Settings - Boil-over causes
smoking and greasy spillovers that may ignite.
13
. Do not use aluminum foil, aluminum liners or aluminum containers on the
unit.
99637771_A_EN.qxp 19/07/2005 11:45 Page 2
3
14. Utensil Handles Should Be Turned inward and Not Extend Over Adjacent
Surface Units - To reduce the risk of burns, and spillage due to unintentional
contact with the utensil, the handle of a utensil should be positioned so that it is
turned inward, and does not extend over adjacent surface units.
15. Do not Cook on Broken Cooktop - If cooktop should break, cleaning solutions
and spillovers may penetrate the broken cooktop and create a risk of electric shock.
Contact a qualified technician immediately.
16. Clean Cook-Top With Caution - If a wet sponge or cloth is used to wipe spills on
a hot cooking area, be careful to avoid steam burn. Some cleaners can produce
noxious fumes if applied to a hot surface.
CAUTION
Do not store items of interest to children in cabinets above or around the cooktop -
children climbing on the cooktop to reach items, could be seriously injured.
IMPORTANT SAFETY INSTRUCTIONS
99637771_A_EN.qxp 19/07/2005 11:45 Page 3
4
Table oof CContents
Before IInstallation 55
Installation 66
Other IInstallation RRequirements 77
Electrical CConnection 8
Safety PPrecautions 99
Principle oof IInduction 110
Glass TTop, CCoil SSize aand CControls 111
Controls aand OOperation 112
Heating ZZones, CCoil SSizes && UUtensils 112
Power SSharing 112
Utensils ffor YYour IInduction UUnit 13
Matching PPots && PPans wwith CCoils eetc. 113
To DDo oor NNot tto DDo 114
Cleaning RRecommendations 15
Troubleshooting 116
Your ssafety aand eease oof uuse aare iimportant tto uus.
In this manual we have provided a number of safety warnings and as well as numerous tips
and hints for using the unit. Warnings and tips are marked with the following symbols:
Safety warning symbol
Tips and hints
99637771_A_EN.qxp 19/07/2005 11:45 Page 4
5
If you are receiving the unit from a
transportation company, it is customer’s
obligation to inspect thepackage and note
any damage on the delivery receipt. After
delivery, have your induction cooktop
carefully unpacked, and again check forany
visible damage. If you find any damage onthe
unit at this point, immediately inform your
dealer or distributor. Although the
responsibility for shipping lies with the
carrier, your dealer/ distributor will assist you
with your claim.
If the unit is not supposed to be installed for
some time, you should keep it in its original
packaging, stored in a dry and safe place.
Read through the section of this manual
which pertains to installation, and make sure
that all of the requirements can be provided
or are already provided. Ensure that your
electric power supply is correct.
Before you install the unit, you should take a
moment to write down the information from
your nameplate and fill-out the table on page
19, for future after-sale servicing needs. This
information will be required every time you
call for any service on your unit.
Before Installation
99637771_A_EN.qxp 19/07/2005 11:45 Page 5
Loading...
+ 11 hidden pages