KRUPS XL2000 User Manual

0 (0)
01
Thank you for choosing the KRUPS XL 2000 Perfect Milk Frother. You will enjoy the simplicity in use
to froth and heat milk. Thanks to the KRUPS Frothing Control
TM
, the KRUPS Perfect Milk Frother will
have you producing barista-quality beverages in the comfort of your home.
KRUPS Frothing Control
This patented technology takes the guesswork out of hot milk preparation. The machine automatically
achieves expert results by constantly monitoring the temperature of the milk then frothing to the
precise requirements of the recipe. When the process is complete the unit automatically shuts off.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and/or
injury to persons, including the following:
Read all instructions prior to first use.
The appliance must only be plugged into
main socket with a ground supply. Check
that the supply voltage matches the
country’s requirement on the rating plate of
the appliance.
Any incorrect connection voids the
guarantee.
Unplug the appliance immediately if you
notice any anomalies during operation.
Always place your XL 2000 Perfect Milk
Frother on a flat, stable, heat resistant work
surface away from water splashes and any
external sources of heat.
Note that the body of the stainless steel
Perfect Milk Frother becomes hot during
operation. Do not touch the sides of the
product during use. Use the handle to move
the product when hot.
Do not touch hot surfaces. Use handles or
knobs.
Do not leave your hand on the power cord
or the hot parts of the appliance.
To protect against fire, electric shock and
injury to persons, do not immerse cord,
plugs, base or body in water or other liquid.
Do not wash the appliance in the
dishwasher.
Close supervision is necessary when any
appliance is used near children. Keep
appliance out of reach of children. Children
should be supervised to ensure that they do
not play with the appliance.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capacities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Between 2 uses, let the appliance rest for 2
minutes before lauching a new cycle
Unplug appliance from outlet when not
in use, before and during cleaning. Allow
the product to cool down before putting
on or taking off parts, before cleaning the
appliance and before storing.
Your guarantee does not apply if the appliance
is not cleaned or maintained regularly or if there
is an unfamiliar part found inside the product.
EN
Asoccino-int-NAFTA.indd 1 4/05/10 15:39:13
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or has been damaged in any manner. Return appliance to the nearest authorized service facility
for examination, repair or adjustment.
All of our appliances are subject to quality control checks. Operating tests are carried out on
the appliances at random, which is why some may have traces of use.
This appliance is for household use. Any servicing other than cleaning and user maintenance
should be performed by the KRUPS Consumer Service Department.
Do not let cord hang over edge of table or counter, or touch hot surfaces.
The use of accessory attachments not recommended by KRUPS may result in fire, electric
shock or injury to persons.
Do not place on or near a hot gas or electric burner, or in a heated oven.
Extreme caution must be used when moving an appliance containing hot liquids.
Do not use appliance for other than intended use.
Do not pour liquids (soups, sauces etc.) other than milk into the container.
Always close the lid when running the XL 2000 Perfect Milk Frother. Scalding milk may splash
out if the lid is removed during the brewing cycles.
Protect the machine against humidity and freezing. Keep in dry place at room temperature.
Do not use outdoors.
This product has been designed for domestic use only. Any commercial use, inappropriate
use or failure to comply with the instructions, the manufacturer accepts no responsibility and
the guarantee will be void.
SAVE THESE INSTRUCTIONS
SPECIAL CORD SET INSTRUCTIONS
A short power-supply cord (or detachable power-supply cord) is to be provided to reduce
risks resulting from becoming entangled in or tripping over a longer cord.
Longer detachable power-supply cords or extension cords are available and may be used if
care is exercised in their use.
If a long detachable power-supply cord or extension cord is used,
- The marked electrical rating of the detachable power-supply cord or extension cord should
be at least as great as the electrical rating of the appliance,
- If the appliance is of the grounded type, the extension cord should be a grounding-type
3-wire cord.
- The longer cord should be arranged so that it will not drape over the counter top or table
top where it can be pulled on by children or tripped over.
02
USING FOR THE FIRST TIME
Remove all packaging, stickers or paper inserts from the product.
Wash the appliance inside and out to remove any dust that may have accumulated during shipping.
Do not submerge the product in water.
Do not wash the product in the dishwasher.
Dry the appliance thoroughly, taking careful note that the frothing device is securely fixed in place.
DESCRIPTION OF THE APPLIANCE
1
Transparent anti-spill cover
2
Multi-direction pouring spout
3
Aluminium container with anti-adhesive coating and brushed stainless steel trim
4
Base with 360° connection
5
Stainless steel coated with soft touch satin finish plastic
6
3 preparation control panel: one button for each recipe
7
Removable frothing device
8
Graduation for the hot milk recipe (max. volume of milk)
9
Graduation for the Caffe Latte recipe (max. volume of milk)
10
Graduation for the Cappuccino recipe (max. volume of milk)
11
Power cord storage under the base
INSTRUCTIONS
FOR USING THE APPLIANCE
3 simple steps for use
1. Pour the milk - 2. Select your beverage - 3. Serve
Cappuccino takes between 1
switch off automatically once milk at ideal temperature is obtained.
Caffe Latte takes between 2 and 3 minutes to achieve result with refrigerated milk. Unit will switch
off automatically once milk at ideal temperature is obtained.
Hot Milk takes between 2
with refrigerated milk. Unit will switch off automatically once milk is at ideal temperature and proper
proportion of milk and frothed milk is obtained.
Always check that the frothing device is secured in place at the bottom of the container.
The device is removable for cleaning by pulling firmly up on it. To install, click back into position.
Asoccino-int-NAFTA.indd 2 4/05/10 15:39:13
03
USING FOR THE FIRST TIME
Remove all packaging, stickers or paper inserts from the product.
Wash the appliance inside and out to remove any dust that may have accumulated during shipping.
Do not submerge the product in water.
Do not wash the product in the dishwasher.
Dry the appliance thoroughly, taking careful note that the frothing device is securely fixed in place.
DESCRIPTION OF THE APPLIANCE
1
Transparent anti-spill cover
2
Multi-direction pouring spout
3
Aluminium container with anti-adhesive coating and brushed stainless steel trim
4
Base with 360° connection
5
Stainless steel coated with soft touch satin finish plastic
6
3 preparation control panel: one button for each recipe
7
Removable frothing device
8
Graduation for the hot milk recipe (max. volume of milk)
9
Graduation for the Caffe Latte recipe (max. volume of milk)
10
Graduation for the Cappuccino recipe (max. volume of milk)
11
Power cord storage under the base
INSTRUCTIONS
FOR USING THE APPLIANCE
3 simple steps for use
1. Pour the milk
A1
- 2. Select your beverage
A2
- 3. Serve
A3
Cappuccino takes between 1
1/2
and 2
1/2
minutes to achieve result with refrigerated milk. Unit will
switch off automatically once milk at ideal temperature is obtained.
Caffe Latte takes between 2 and 3 minutes to achieve result with refrigerated milk. Unit will switch
off automatically once milk at ideal temperature is obtained.
Hot Milk takes between 2
1/2
and 4 minutes to achieve result with refrigerated milk to achieve result
with refrigerated milk. Unit will switch off automatically once milk is at ideal temperature and proper
proportion of milk and frothed milk is obtained.
Always check that the frothing device is secured in place at the bottom of the container.
The device is removable for cleaning by pulling firmly up on it. To install, click back into position.
EN
Asoccino-int-NAFTA.indd 3 4/05/10 15:39:13
04
DO NOT CLEAN THE APPLIANCE
IN A DISHWASHER
Remove the appliance from its electrical power base.
1 - Remove the frothing device from inside the container
B1
2 - Clean the container using warm water and scrub liquid with a sponge or a non-abrasive
cleaner
B2
3 - Rinse the container with clear, warm water
B3
4 - Dry the appliance
Remember to install the frothing control device again, ensuring that it clicks into place
Clean your product regularly to keep it in optimum condition, as described below:
• Fillyourappliancetothemaximummilklevelwithwatercontainingafewdropsofdishwashing
product
• Pressthe«hotmilk»button
• Rinseandwipethecontainercleanattheendofthecycle.
THE VARIOUS PREPARATIONS
Milk choices: Different results are achieved depending on the type and temperature of the
milk. Whole milk, 2% fat, 1% fat, skim milk and even soy milk will foam with varying results. i.e.
Whole milk will provide a richer flavor and texture but skim milk will often provide a larger volume
of foam.
Note: never reheat milk that has already been frothed.
Asoccino-int-NAFTA.indd 4 4/05/10 15:39:13
05
Cappuccino
50% Frothed milk
50% Hot milk
Starting milk volume
Max 5 oz (150 ml)
Min 2 oz (50 ml)
1 Press the
button. The
button will light up and
the appliance will start
operating automatically.
The unit will run for between
1
1/2
and 2
1/2
minutes with
refrigerated milk.
The motor starts
intermittently and then
operates at low speed.
When the preparation
reaches the ideal
temperature, the motor
accelerates to froth the milk.
The button light is switched
off: your preparation is ready
to be served at the ideal
temperature and a proportion
of milk and frothed milk of
around 50/50.
2 Serve the frothed milk
into a cup then add your
espresso or coffee to the
preparation.
The percentage of
components to complete a
Cappuccino is 1/3 of milk,
1/3 of coffee, 1/3 of frothed
milk.
Caffe Latte
20% Frothed milk
80% Hot milk
Starting milk volume
Max 7,5 oz (200 ml)
Min 2 oz (50 ml)
1 Press the
button. The
button will light up and
the appliance will start
operating automatically.
The unit will run for between
2 and 3 minutes with
refrigerated milk.
The motor starts
intermittently and then
operates at low speed.
When the preparation
reaches the ideal
temperature, the motor
accelerates to froth the milk.
The button light is switched
off: your preparation is ready
to be served at the ideal
temperature and a proportion
of milk and frothed milk of
around 80/20.
2 Serve the frothed milk
into a cup then add your
espresso or coffee to the
preparation.
The percentage of
components to complete
a Caffe Latte is 3/5 of
milk, 1/5 of coffee, 1/5 of
frothed milk.
Hot milk
<10% Frothed milk
90% Hot milk
Starting milk volume
Max 10 oz (300 ml)
Min 2 oz (50 ml)
1 Press the
button. The
button will light up and
the appliance will start
operating automatically
The unit will run for
between 2
1/2
and 4
minutes with refrigerated
milk.
The motor starts
intermittently and then
its speed automatically
adapts to the volume of
milk to be heated.
The button light is switched
off: your preparation is
ready to be served at the
ideal temperature (hotter
than the Cappuccino
and the Caffe Latte
preparations – around
10°C more). The result
obtained generally has a
proportion of froth of less
than 10%.
2 Serve the hot milk into a
suitable cup.
Caution:
- Using more milk than recommended will cause overflow and a potential burn hazard.
- Minimum milk level is approx 2 oz. - 50 mL.
- Milk must at least cover the frothing device for the product to function effectively.
- For each frothing selection - Cappuccino, Latte or steamed milk- the maximum starting
volume of milk is marked on the inside of the container.
EN
Asoccino-int-NAFTA.indd 5 4/05/10 15:39:13
06
RECOMMENDATIONS
FOR QUALITY RESULTS IN CASE
OF SUCCESSIVE CYCLES
For best results it is important to rinse and dry the product between consecutive uses. Heating
milk repeatedly can cause a “skin” of milk to form on the bottom of the container which can
harden and prevent proper heating and frothing.
For the Caffe Latte function, in order to ensure that recipe works well, take care to clean the
inside of the container between each use in order to remove the skin of milk and use cold milk
straight out of the fridge.
PROBLEMS AND CORRECTIVE
ACTIONS
Possible problems Probable causes Corrective actions
The appliance will not start,
the recipe button flashes
The temperature of the pot is
too high
Wait for the light to stop
flashing and press the
button of the desired recipe
again.
The appliance will not start,
all of the recipe buttons flash
The movement of the frothing
control device is restricted
Empty the milk, remove the
frothing control device and
clean your container
If the problem continues, please contact the service centre in your country.
GUARANTEE
This product has been designed for domestic use only. Any commercial use, inappropriate use
or failure to comply with instructions or safeguards, the manufacturer accepts no responsibility
and the guarantee will not apply.
If you have any questions, please contact the customer service of your country. It is preferable
to have the appliance close to hand when calling, as well as the serial number marked on the
bottom of the appliance.
This product contains electronics board in the lower part, all introduction of water or other liquid
in this part could damage the product. In this case the guarantee will not apply.
LIMITS OF USE
This appliance is for heating and frothing milk. It is not designed to heat other liquids or
preparations (soups, sauces etc…).
The manufacturer cannot be held responsible for any damage arising from the appliance
being used for other purposes, incorrect connection, handling, operations and repairs. The
maintenance guarantees will be void in such circumstance.
This appliance is intended to be used in household only.
It is not intended to be used in following applications, and the guarantee will not apply for:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
Asoccino-int-NAFTA.indd 6 4/05/10 15:39:13
07
GUARANTEE
This product has been designed for domestic use only. Any commercial use, inappropriate use
or failure to comply with instructions or safeguards, the manufacturer accepts no responsibility
and the guarantee will not apply.
If you have any questions, please contact the customer service of your country. It is preferable
to have the appliance close to hand when calling, as well as the serial number marked on the
bottom of the appliance.
This product contains electronics board in the lower part, all introduction of water or other liquid
in this part could damage the product. In this case the guarantee will not apply.
LIMITS OF USE
This appliance is for heating and frothing milk. It is not designed to heat other liquids or
preparations (soups, sauces etc…).
The manufacturer cannot be held responsible for any damage arising from the appliance
being used for other purposes, incorrect connection, handling, operations and repairs. The
maintenance guarantees will be void in such circumstance.
This appliance is intended to be used in household only.
It is not intended to be used in following applications, and the guarantee will not apply for:
- staff kitchen areas in shops, offices and other working environments;
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
EN
Asoccino-int-NAFTA.indd 7 4/05/10 15:39:13
08
KRUPS MANUFACTURER’S
WARRANTY : WWW.KRUPS.COM
With a strong commitment to the environment, most of KRUPS products are repairable during
and after the warranty period. Before returning any defective products to the point of purchase,
please call KRUPS consumer service directly at the phone number below for repair options.
Your help to sustain the environment is appreciated!
THE WARRANTY
This product is guaranteed by KRUPS for a period of 2 years against any manufacturing defect
in materials or workmanship, starting from the initial date of purchase.
The manufacturer’s warranty by KRUPS is an extra benefit which does not affect consumer’s
Statutory Rights.
The KRUPS warranty covers all costs related to restoring the proven defective product so that
it conforms to its original specifications, through the repair or replacement of any defective part
and the necessary labor. At KRUPS’s choice, a replacement product may be provided instead
of repairing a defective product. KRUPS’s sole obligation and your exclusive resolution under
this warranty are limited to such repair or replacement.
CONDITIONS & EXCLUSIONS
The KRUPS warranty only applies within USA, Canada & Mexico, and is valid only on presentation
of a proof of purchase. The product can be taken directly in person to an authorized service
centre or must be adequately packaged and returned, by recorded delivery (or equivalent method
of postage), to a KRUPS authorized service centre. Full address details for each country’s
authorized service centre are listed on the KRUPS website (www.krups.com) or by calling the
appropriate telephone number listed below to request the appropriate postal address.
KRUPS shall not be obliged to repair or replace any product which is not accompanied by a
valid proof of purchase.
This warranty will not cover any damage which could occur as a result of misuse, negligence,
failure to follow KRUPS instructions, use on current or voltage other than as stamped on the
product, or a modification or unauthorized repair of the product. It also does not cover normal
tear and wear, maintenance or replacement of consumable parts, and the following:
- using the wrong type of water
- scaling (any de-scaling must be carried out according to the instructions for use);
- ingress of water, dust or insects into the product;
- mechanical damages, overloading
- damages or bad results due to wrong voltage or frequency
- accidents including fire, flood, lightning, etc
- professional or commercial use
- damage to any glass or porcelain ware in the product
This warranty does not apply to any product that has been tampered with, or to damages
incurred through improper use and care, faulty packaging by the owner or mishandling by any
carrier.
The KRUPS manufacturer’s warranty applies only for products purchased and used in USA,
Canada & Mexico. Where a product purchased in one country and then used in another one:
a) The KRUPS guarantee duration is the one in the country of usage of the product, even if the
product was purchased in another listed country with different guarantee duration.
b) The KRUPS guarantee does not apply in case of non conformity of the purchased product
with the local standards, such as voltage, frequency, power plugs, or other local technical
specifications
c) The repair process for products purchased outside the country of use may require a longer
time if the product is not locally sold by KRUPS
d) In cases where the product is not repairable in the new country, the KRUPS guarantee is
limited to a replacement by a similar product or an alternative product at similar cost, where
possible.
Asoccino-int-NAFTA.indd 8 4/05/10 15:39:14
09
EN
This warranty will not cover any damage which could occur as a result of misuse, negligence,
failure to follow KRUPS instructions, use on current or voltage other than as stamped on the
product, or a modification or unauthorized repair of the product. It also does not cover normal
tear and wear, maintenance or replacement of consumable parts, and the following:
- using the wrong type of water
- scaling (any de-scaling must be carried out according to the instructions for use);
- ingress of water, dust or insects into the product;
- mechanical damages, overloading
- damages or bad results due to wrong voltage or frequency
- accidents including fire, flood, lightning, etc
- professional or commercial use
- damage to any glass or porcelain ware in the product
This warranty does not apply to any product that has been tampered with, or to damages
incurred through improper use and care, faulty packaging by the owner or mishandling by any
carrier.
The KRUPS manufacturer’s warranty applies only for products purchased and used in USA,
Canada & Mexico. Where a product purchased in one country and then used in another one:
a) The KRUPS guarantee duration is the one in the country of usage of the product, even if the
product was purchased in another listed country with different guarantee duration.
b) The KRUPS guarantee does not apply in case of non conformity of the purchased product
with the local standards, such as voltage, frequency, power plugs, or other local technical
specifications
c) The repair process for products purchased outside the country of use may require a longer
time if the product is not locally sold by KRUPS
d) In cases where the product is not repairable in the new country, the KRUPS guarantee is
limited to a replacement by a similar product or an alternative product at similar cost, where
possible.
Asoccino-int-NAFTA.indd 9 4/05/10 15:39:14
Loading...
+ 21 hidden pages