KRUPS AromaControl Therm 197, AromaControl Therm Time 199, AromaControl Therm Time Steel 229 User Manual

a	d
b
c
	g
		Aroma Control Timer
e		l
	h	j
		k
		m
f		Flavor Release
		Technology
i

1		3
4	5	6
	7	8
9	10	11

4

AromaControl Therm	Model # 197
AromaControl Therm Time	Model # 199
AromaControl Therm Time Steel	Model # 229

USA		6
Instructions for Use
Warranty
Guarantee of Performance
Français		14
Mode d’emploi
Garantie
Garantie de rendement
Español		22
Instrucciones de uso
Garantía
Garantía de rendimiento

5

IMPORTANT SAFEGUARDS

When using the electrical appliances, basic safety precautions should be always be followed to reduce the risk of fire, electric chock, and/or injury to persons including the following :

1.Read all instructions.

2.Do not touch hot surfaces. Use handler or knobs.

3.To protect against fire, electric shock and injury to persons, do not place cord, plugs or appliance in water or other liquid.

4.Close supervision is necessary when any appliance is used by or near children.

5.Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.

6.Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest KRUPS Service Center for examination, repair or adjustment.

7.The use of accessory attachments not recommended by KRUPS may result in fire, electric shock or injury to persons.

8.Do not use outdoors.

9.Do not let cord hang over edge of table or counter, or touch hot surfaces.

10.Do not place on or near a hot gas or electric burner, or in a heated oven.

11.To disconnect, turn any control to «off,» then remove plug from wall outlet.

12.Do not use the appliance for other than intended use.

13.Scalding may occur if the lid is removed during the brewing cycles.

14.Do not pour liquids other than water and descaling solutions specified in this manual into the water tank.

6

To reduce the risk of injury, do not drape cord over the counter top or table top where it can be pulled on by children or tripped over unintentionally.

A.The glass carafe or thermal jug is designed for use with this appliance. It must never be used on a range top.

B.Do not set a hot container on a wet or cold surface.

C.Do not use a cracked container or a container having a loose or weakened handle.

D.Do not clean container with cleansers, steel wool pads, or other abrasive material.

E.Never put an isothermal jug in the microwave oven.

SAVE THESE INSTRUCTIONS

7

SHORT CORD INSTRUCTIONS

A.A short power supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord.

B.Extension cords are available and may be used if care is exercised in their use.

C.If an extension cord is used,

1)the marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance,

2)the longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over.

D.This appliance has a polarized plug (one blade is wider than other). To reduce risks of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

8

Description

aLid

bWater Tank

cPivoting filter holder

d Flavor Release Technology holder e Thermal coffee carafe with lid

f Thermal carafe base

gWater level indicator

h On/Off indicator switch (#197)

iCord storage

Timer Models (#199 & #229) j Hour setting control

k Minute setting control l On/Off Indicator light m Rotating selector switch

The benefits of the Aroma-

Control Therm coffee maker

Exclusive Flavor Release Technology

-Releases the full aroma of the coffee through a new brewing innovation:

At the beginning of the brewing cycle, the ‘Flavor Release’ mechanism remains closed so as to keep the hot water in contact with the ground coffee for a longer period of time and thus obtain the maximum flavor from your coffee.

After about 1 - 2 minutes of brewing, the coffee is released and flows into the coffee carafe.

The KRUPS exclusive Flavor Release Technology thus guarantees you optimal contact between water and ground coffee and the ideal time for brewing, particularly for small quantities.

Thanks to the KRUPS exclusive technology, your coffee will have a fuller, richer aroma and a delicious taste.

- Lid for thermal coffee carafe

When the thermal coffee carafe is inserted in the coffee maker, the middle of the lid retracts

to let the coffee filter through while the lid remains tightly screwed on the carafe to retain heat.

When the brewing process is complete, the specially designed sealing system keeps coffee fresh and warm for up to five hours. To pour your freshly brewed coffee, the lid only needs to be turned a half of a revolution counterclockwise, not removed.

‘Stop ‘n Serve’ Feature

Lets you pour a cup or two while brewing. The automatic filter seal will allow you to remove the carafe for 20 seconds without dripping coffee onto the thermal carafe base.

Note: KRUPS AromaControl will shut off automatically after the brewing is complete for added safety.

Before first use

Setting the time (models 199 & 229)

•Plug in the KRUPS “AromaControl Therm Time”. Make sure the rotating selector (m) switch is in the “off” position.

The LCD display will be flashing intermittently. This is your signal to set the digital clock.

•Turn the selector switch to position (m). Set the hours and minutes by pressing the “h” and “min” buttons respectively.

The time is now set.

Running with water only

•Before first use, cycle the appliance once or twice with water (without coffee) to help remove any factory sediment.

•Open the lid (1).

•Fill the water tank with cold water (2).

The water level indicator (g) of the water tank is measured in cups of water.

•Close the lid.

•Turn the machine ‘on’ to begin (position (h) for #197, position (m) for #199 & #229). The indicator light will illuminate.

Please note: Your AromaControl coffee maker is fitted with a Flavor Release filter holder (exclusive to KRUPS).

9