© KROHNE 07/2000
Supplementary
Installation and
Operating Instructions
IFC 090, IFC 090 i
KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 D-47058 Duisburg |
1/7 |
Tel.: 0203-301 309 Fax: 0203-301389 · e-mail: krohne@krohne.de |
|
Supplementary Documentation IFC 090, IFC 090 i with PROFIBUS-PA |
|
GENERAL ....................................................................................................................................................................... |
3 |
ITEMS INCLUDED WITH SUPPLY ................................................................................................................................ |
3 |
SOFTWARE HISTORY ................................................................................................................................................... |
3 |
1. PROFIBUS-PA ............................................................................................................................................................ |
3 |
1.1 GSD........................................................................................................................................................................ |
4 |
1.2 PROFIBUS-PA PROFILE ......................................................................................................................................... |
4 |
1.3 MEANING OF MEASUREMENT AND STATUS INFORMATION............................................................................................. |
4 |
2. ELECTRICAL CONNECTION (SEE SECTION 2 IN THE INSTALLATION AND OPERATING INSTRUCTIONS) ................................... |
6 |
2.1 INTERCONNECTION OF DEVICES IN THE HAZARDOUS LOCATION.................................................................................... |
6 |
2.2 BUS CABLE............................................................................................................................................................... |
6 |
2.3 SHIELDING AND GROUNDING...................................................................................................................................... |
6 |
2.4 PROFIBUS-PA CONNECTION .................................................................................................................................. |
6 |
3. MENU SETTINGS FOR PROFIBUS-PA (SEE SECTION 4 IN THE INSTALLATION AND OPERATING INSTRUCTIONS)............. |
7 |
4. TECHNICAL DATA, PROFIBUS IDENT-NO. F401 ................................................................................................... |
7 |
KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 D-47058 Duisburg |
2/7 |
Tel.: 0203-301 309 Fax: 0203-301389 · e-mail: krohne@krohne.de |
|
Supplementary Documentation IFC 090, IFC 090 i with PROFIBUS-PA
These Instructions are supplementary to the “Installation and Operating Instructions IFC 090 K / F“ dated 12/96. The details given there, in particular the Safety Information, are valid and should be observed. These Supplementary Instructions provide only additional information for device operation and connection to a PROFIBUS-PA fieldbus.
Attention: Please set the controller to manual mode before changing parameters of the IFC 090.
In addition to the standard scope of supply, these Supplementary Instructions for the IFC 090 with PROFIBUS-PA interface, plus a diskette with all available GSD files of KROHNE devices.
Issued |
Signal converter |
|
User program |
Instructions |
|
|||
month/year |
Hardware |
Firmware |
Hard- |
Operating |
Soft- |
Device |
|
User |
|
|
|
ware |
system |
ware |
|
|
program |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
09/98 |
PROFIBU |
1.00 |
|
|
|
12/96+Supplement |
|
|
|
S-PA |
|
|
|
|
01/99 |
|
|
|
Module |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
05/99 |
PROFIBU |
2.00/99050 |
PC |
Windows |
PDM |
12/96+Supplement |
|
|
|
S-PA |
5 |
|
95, 98, NT |
V |
05/99 + 08/99, 03/00 |
|
|
|
Module |
|
|
4.0 |
4.1.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
07/00 |
PROFIBU |
2.00/ |
PC |
Windows |
PDM |
12/96+Supplement |
|
|
|
S-PA |
|
|
95, 98, NT |
V |
07/00 |
|
|
|
Module |
|
|
4.0 |
4.1.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Engineering or operation |
|
Control system (PLC) |
control tool |
|
Class 1 master |
Class 2 master |
|
|
PROFIBUS-DP, up to 12 Mbit/s |
|
Analog I/O module |
Power |
Segment |
|
||
|
Supply |
|
|
coupler/link |
|
|
|
|
|
Segment |
PROFIBUS-PA |
|
|
|
|
coupler/link |
|
|
|
7 8 6 3 2 0 |
|
PROFIBUS-PA |
|
4-20 mA |
|
|
|
HART device |
|
The above diagram shows a typical instrumentation with PROFIBUS-PA devices in hazardous and non-hazardous locations, including connection of conventional devices (e.g. with 4-20mA signals) to the PROFIBUS-PA. The PROFIBUS-PA is normally connected to a segment coupler which, among other things, carries out conversion to the PROFIBUS-DP. Here, it needs to be noted in particular that the segment coupler is normally set to a fixed baud rate on the DP side.
KROHNE Messtechnik GmbH & Co. KG · Ludwig-Krohne-Str. 5 D-47058 Duisburg |
3/7 |
Tel.: 0203-301 309 Fax: 0203-301389 · e-mail: krohne@krohne.de |
|