Konica Minolta 210, 162 User Manual

5 (1)
Konica Minolta 210, 162 User Manual

162/210

User Manual

x Contents

Contents

1

Introduction

 

 

1.1

We want you to be a satisfied customer ........................................

1-3

 

1.2

Trademarks and registered trademarks .........................................

1-3

 

1.3

Regulation notices ............................................................................

1-4

 

 

CE Marking (Declaration of conformity) .........................................

1-4

 

 

For users in countries subject to class B regulations ....................

1-4

 

 

For users in countries not subject to class B regulations ..............

1-4

 

 

Laser safety ....................................................................................

1-5

 

 

Internal laser radiation ....................................................................

1-5

 

 

CDRH regulation ............................................................................

1-6

 

 

For European users ........................................................................

1-6

 

 

For Denmark users .........................................................................

1-7

 

 

For Finland, Sweden users ............................................................

1-7

 

 

For Norway users ...........................................................................

1-8

 

 

Laser safety label ...........................................................................

1-9

 

 

Ozone release ................................................................................

1-9

 

 

Acoustic noise ..............................................................................

1-10

 

1.4

Safety information ..........................................................................

1-11

 

 

Warning and precaution symbols ................................................

1-11

 

 

Meaning of symbols .....................................................................

1-12

 

 

Disassemble and modification .....................................................

1-12

 

 

Power cord ...................................................................................

1-13

 

 

Power source ...............................................................................

1-14

 

 

Power plug ...................................................................................

1-15

 

 

Grounding ....................................................................................

1-16

 

 

Installation ....................................................................................

1-17

 

 

Ventilation ....................................................................................

1-18

 

 

Actions in response to troubles ...................................................

1-19

 

 

Consumables ...............................................................................

1-20

 

 

When moving the machine ..........................................................

1-21

 

 

Before successive holidays ..........................................................

1-21

 

1.5

Energy Star® ...................................................................................

1-22

 

 

Energy Star® partner ...................................................................

1-22

 

 

What is an Energy Star® product? ..............................................

1-22

 

1.6

Explanation of manual conventions ..............................................

1-23

 

 

Safety advices ..............................................................................

1-23

 

 

Sequence of action ......................................................................

1-23

bizhub 162/210

x-3

 

 

 

 

 

 

 

 

 

 

 

 

 

...............................................................................................Tips

1-24

 

 

 

Special text markings ...................................................................

1-24

 

 

1.7

Explanation of basic concepts and symbols ................................

1-25

 

 

 

Paper Feeding ...............................................................................

1-25

 

 

 

Width and length ...........................................................................

1-26

 

 

 

Lengthwise and crosswise ............................................................

1-26

2

Precautions

 

 

 

2.1

Installation precautions ....................................................................

2-3

 

 

 

Installation site ................................................................................

2-3

 

 

 

Power source ..................................................................................

2-3

 

 

 

Space requirements ........................................................................

2-4

 

 

2.2

Operation precautions ......................................................................

2-5

 

 

 

Operating environment ...................................................................

2-5

 

 

 

Proper use ......................................................................................

2-5

 

 

 

Transporting the machine ...............................................................

2-6

 

 

 

Care of machine supplies ...............................................................

2-6

 

 

 

Storage of copies ............................................................................

2-7

 

 

2.3

Legal restrictions on copying ...........................................................

2-8

3

Before making copies

 

 

 

3.1

Components and their functions .....................................................

3-3

 

 

3.2

Part names and their functions ........................................................

3-5

 

 

 

Main unit .........................................................................................

3-5

 

 

 

Inside of main unit ...........................................................................

3-7

 

 

 

Document feeder (option) ...............................................................

3-8

 

 

 

Multi bypass tray (option) ...............................................................

3-9

 

 

 

Paper feed unit (option) ................................................................

3-10

 

 

 

Job separator (option) ...................................................................

3-11

 

 

3.3

Control panel ...................................................................................

3-12

 

 

 

Names of control panel parts and their functions .........................

3-12

 

 

 

Display indications ........................................................................

3-15

 

 

 

Adjusting the angle of the display .................................................

3-16

 

 

3.4

Power supply ...................................................................................

3-17

 

 

 

Turning the machine on ................................................................

3-17

 

 

 

Turn the machine off .....................................................................

3-17

 

 

3.5

Default settings ................................................................................

3-18

x-4

bizhub 162/210

 

 

 

 

 

 

3.6

..............................................................................Useful functions

3-19

 

Auto panel reset ...........................................................................

3-19

 

Energy save mode .......................................................................

3-19

 

Auto shut off .................................................................................

3-20

 

Queued copy jobs ........................................................................

3-20

3.7

Paper ................................................................................................

3-21

 

Paper types ..................................................................................

3-21

 

Paper sizes ...................................................................................

3-22

 

Paper capacity .............................................................................

3-23

 

Unsuitable paper ..........................................................................

3-24

3.8

Print area .........................................................................................

3-25

3.9

Paper storage ..................................................................................

3-26

3.10 Making copies on manually fed paper ..........................................

3-27

 

Paper that can be fed manually ...................................................

3-27

 

Adjusting the multi bypass tray ....................................................

3-28

 

Loading plain paper into the bypass trays ...................................

3-29

 

Loading postcards into the bypass trays .....................................

3-30

 

Loading envelopes into the bypass trays ....................................

3-31

 

Loading OHP transparencies into the bypass trays ....................

3-33

 

Loading label sheets into the bypass trays ..................................

3-34

 

Copying onto manually fed paper by manual bypass .................

3-35

 

Copying onto manually fed paper by multi bypass tray ..............

3-38

3.11 Selecting the paper source ............................................................

3-41

 

To make copies using the auto paper function ...........................

3-41

 

To copy with a manually selected paper size ..............................

3-42

 

To load special paper into the 1st tray ........................................

3-42

 

Automatically selecting the paper source ....................................

3-43

 

Order for automatically switching paper drawers ........................

3-44

3.12

Original documents ........................................................................

3-45

 

Using the document feeder .........................................................

3-45

 

Document types ...........................................................................

3-45

 

Documents of uniform sizes ........................................................

3-46

 

Mixed width document sizes (DF-605) ........................................

3-46

 

Precautions concerning the documents ......................................

3-47

3.13 Specifying a zoom setting .............................................................

3-48

 

Zoom settings ..............................................................................

3-48

 

To make copies using the auto zoom setting ..............................

3-49

 

To make copies using a fixed zoom setting ................................

3-50

 

To make copies using a specific zoom setting ............................

3-51

 

To make copies using the X/Y zoom function .............................

3-52

3.14 Specifying the copy density ...........................................................

3-54

 

To make copies after specifying a copy density ..........................

3-55

bizhub 162/210

x-5

 

 

 

 

 

 

 

 

 

 

 

 

3.15

.....................................................................Interrupting copy jobs

3-56

 

 

 

To interrupt a copy job ..................................................................

3-56

4

Making copies

 

 

 

4.1

Basic copies .......................................................................................

4-3

 

 

 

Making a basic copy .......................................................................

4-3

 

 

4.2

Loading paper ....................................................................................

4-5

 

 

 

Loading paper into the 1st tray .......................................................

4-6

 

 

 

Loading paper Into the 2nd paper tray ...........................................

4-8

 

 

4.3

Loading the document ....................................................................

4-10

 

 

 

Loading documents into the document feeder ............................

4-10

 

 

 

Positioning a sheet document on the original glass .....................

4-12

 

 

 

Positioning transparent documents on the original glass .............

4-13

 

 

 

Positioning books on the original glass ........................................

4-14

 

 

 

Loading documents of mixed sizes in the document feeder ........

4-15

 

 

4.4

Stopping a copy job ........................................................................

4-18

 

 

 

Stopping, restarting, cancelling a copy job ..................................

4-18

 

 

4.5

Checking the machine counters ....................................................

4-19

 

 

 

To check the counters ..................................................................

4-19

 

 

4.6

Reducing electricity usage .............................................................

4-21

 

 

 

Specifying energy save mode and auto shut off ..........................

4-21

5

Useful operations

 

 

 

5.1

Specifying a zoom setting ................................................................

5-3

 

 

 

To zoom a standard-sized document to a different standard size .5-3

 

 

5.2

Using the Auto/Photo function .........................................................

5-5

 

 

 

To make sharp copies of illustrations or photos .............................

5-5

 

 

5.3

Copying onto various types of media ..............................................

5-7

 

 

 

To copy onto OHP transparencies .................................................

5-7

 

 

 

To copy onto label sheets ...............................................................

5-9

 

 

 

To copy onto envelopes (non-standard size) ................................

5-12

 

 

 

To copy onto postcards ................................................................

5-15

6

Advanced copy operations

 

 

 

6.1

Single-sided copies ...........................................................................

6-3

 

 

 

Specifying settings for 2in1 (or 4in1) copies ...................................

6-3

 

 

 

Using the original glass ...................................................................

6-3

 

 

 

Using the document feeder ............................................................

6-5

 

 

 

Specifying settings for book separation copies ..............................

6-6

x-6

bizhub 162/210

 

 

 

 

 

 

6.2

........................................................................Double-sided copies

6-8

 

Types of double-sided copying .....................................................

6-8

 

Precautions on double-sided copying ...........................................

6-9

 

To make double-sided copies using the original glass ................

6-10

 

To make double-sided copies using the document feeder .........

6-11

6.3

Finishing copies ..............................................................................

6-12

 

Finishing functions .......................................................................

6-12

 

Notes on using the sort and group functions ..............................

6-13

 

Shift sorting ..................................................................................

6-14

 

Crisscross sorting ........................................................................

6-14

 

Shift grouping ...............................................................................

6-14

 

Crisscross grouping .....................................................................

6-14

 

Specifying finishing settings (sorting using the original glass) .....

6-15

 

Specifying finishing settings (using the document feeder) ..........

6-16

6.4

Erasing sections of copies ............................................................

6-17

 

Precautions on the erased margin location .................................

6-17

 

To make copies using an erase setting .......................................

6-18

6.5

Negative/Positive inverted copying ..............................................

6-19

 

To make copies using the negative/positive inverted

 

 

copy function ...............................................................................

6-19

6.6

Making copies for filing ..................................................................

6-20

 

Precautions on the binding margin location ................................

6-20

 

To make copies using the file margin function ............................

6-21

6.7

Programmed copy jobs ..................................................................

6-22

 

To store a copy program .............................................................

6-22

 

To recall a copy program .............................................................

6-23

6.8

Access numbers .............................................................................

6-24

 

To enter an access number .........................................................

6-24

7 Using the utility mode

7.1 Machine settings ..............................................................................

7-4

Selecting the MACHINE SETTING menu .......................................

7-5

Specifying AUTO PANEL RESET ...................................................

7-6

Specifying ENERGY SAVE MODE .................................................

7-7

Specifying AUTO SHUT OFF .........................................................

7-8

Specifying DENSITY (ADF) .............................................................

7-9

Specifying DENSITY (BOOK) .......................................................

7-10

Specifying PRINT DENSITY .........................................................

7-10

Specifying LCD CONTRAST ........................................................

7-11

Specifying LANGUAGE ................................................................

7-11

bizhub 162/210

x-7

 

 

 

 

 

 

 

 

 

 

7.2

.....................................................................Paper source settings

7-12

 

 

 

Selecting the PAPER SOURCE SETUP menu ..............................

7-13

 

 

 

Specifying INCH/METRIC .............................................................

7-13

 

 

 

Specifying TRAY1 PAPER ............................................................

7-14

 

 

 

Specifying PAPER TYPE ...............................................................

7-16

7.3

User management settings ............................................................

7-17

 

 

 

Selecting the USER MANAGEMENT menu ..................................

7-17

 

 

 

Performing DRUM DEHUMIDIFY ..................................................

7-18

 

 

 

Performing TONER REPLENISHER ..............................................

7-18

7.4

Administrative settings ...................................................................

7-19

 

 

 

Selecting the ADMIN. MANAGEMENT menu ...............................

7-20

 

 

 

Specifying AUTO SHUT OFF ........................................................

7-21

 

 

 

Turning on/off user management .................................................

7-22

 

 

 

Registering user access numbers ................................................

7-23

 

 

 

Changing/deleting user access numbers .....................................

7-24

 

 

 

Displaying/clearing the total count for a specific account ............

7-26

 

 

 

Clearing the total counts for all accounts .....................................

7-28

7.5

Copy settings ...................................................................................

7-29

 

 

 

Selecting the COPY SETTING 1 menu .........................................

7-31

 

 

 

Specifying PAPER PRIORITY .......................................................

7-32

 

 

 

Specifying DENSITY PRIORITY ....................................................

7-33

 

 

 

Specifying DENSITY LEVEL (A) ....................................................

7-34

 

 

 

Specifying DENSITY LEVEL (M) ....................................................

7-34

 

 

 

Specifying BINDING POSITION ....................................................

7-35

 

 

 

Specifying MARGIN SETTING ......................................................

7-35

 

 

 

Specifying ERASE SETTING .........................................................

7-36

 

 

 

Specifying SMALL ORIGINAL .......................................................

7-37

 

 

 

Selecting the COPY SETTING 2 menu .........................................

7-38

 

 

 

Specifying MIXED ORIGINAL .......................................................

7-39

 

 

 

Specifying COPY PRIORITY .........................................................

7-39

 

 

 

Specifying OUTPUT PRIORITY .....................................................

7-40

 

 

 

Specifying 4IN1 COPY ORDER ....................................................

7-40

 

 

 

Specifying CRISSCROSS MODE .................................................

7-41

 

 

 

Specifying DUPLEX COPY ...........................................................

7-41

8 When a message appears

8.1

When the message TONER EMPTY appears ..................................

8-3

 

TONER EMPTY message ...............................................................

8-3

 

Replacing the toner bottle ..............................................................

8-4

8.2

When the message PAPER JAM appears .......................................

8-6

 

PAPER JAM message .....................................................................

8-6

 

Clearing a paper misfeed in the duplex unit ...................................

8-7

 

Clearing a paper misfeed in the main unit or 1st tray .....................

8-7

x-8

bizhub 162/210

 

 

 

 

 

 

 

 

 

 

..................Clearing a paper misfeed in the 2nd/3rd/4th/5th tray

8-10

 

 

Clearing a paper misfeed in the multi bypass tray .......................

8-11

 

8.3

When the message ORIGINAL DOC. JAM appears .....................

8-13

 

 

ORIGINAL DOC. JAM message ...................................................

8-13

 

 

Clearing a misfeed in the automatic

 

 

 

document feeder (DF-502) ...........................................................

8-13

 

 

Clearing a misfeed in the reverse automatic

 

 

 

document feeder (DF-605) ...........................................................

8-16

 

8.4

What does each message mean? .................................................

8-18

 

8.5

When incorrect copies are produced ...........................................

8-21

 

8.6

When copying is not performed correctly ....................................

8-23

9

Miscellaneous

 

 

9.1

Specifications ...................................................................................

9-3

 

 

Main unit bizhub 162/210 ..............................................................

9-3

 

 

Automatic duplex unit AD-504 .......................................................

9-4

 

 

Reverse automatic document feeder DF-605 ................................

9-5

 

 

Automatic document feeder DF-502 .............................................

9-6

 

 

Paper feed unit PF-502 ..................................................................

9-6

 

 

Shift tray SF-501 ............................................................................

9-7

 

 

Job separator JS-503 ....................................................................

9-7

 

 

Multi bypass tray MB-501 ..............................................................

9-7

 

9.2

Care of the machine .........................................................................

9-8

 

 

Cleaning .........................................................................................

9-8

 

 

Housing cover ................................................................................

9-8

 

 

Original glass ..................................................................................

9-8

 

 

Document pad ...............................................................................

9-8

 

 

Control panel ..................................................................................

9-9

 

9.3

Function combination matrix .........................................................

9-10

 

 

Function combination matrix for bizhub 162 ...............................

9-10

 

 

Function combination matrix for bizhub 210 ...............................

9-11

 

 

Function combination codes .......................................................

9-11

 

9.4

Paper size and zoom ratio tables ..................................................

9-12

 

 

Paper sizes ...................................................................................

9-12

 

 

Zoom ratios ..................................................................................

9-13

10

Index

 

bizhub 162/210

x-9

 

 

 

 

 

 

 

 

 

 

x-10

bizhub 162/210

1

Introduction

Introduction

1

 

1 Introduction

1.1We want you to be a satisfied customer

Thank you for choosing the bizhub 162/210.

This user manual describes the functions, operating procedures, precautions, and basic troubleshooting for the bizhub 162/210.

Before using this machine, be sure to read the user manual thoroughly in order to ensure that you use the machine efficiently. After you have gone through user’s guide, store it in the holder and keep it handy at all times.

Note that some of the illustrations of the machine used in the user manual may be different from what you actually see on your machine.

1.2Trademarks and registered trademarks

KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS, INC.

PageScope and bizhub are registered trademarks or trademarks of KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.

Netscape Communications, the Netscape Communications logo, Netscape Navigator, Netscape Communicator, and Netscape are trademarks of Netscape Communications Corporation.

PageScope Box Operator:

This software is based in part on the work of the Independent JPEG Group.

Compact-VJE

Copyright 1986-2003 VACS Corp.

bizhub 162/210

1-3

1

Introduction

 

1.3Regulation notices

CE Marking (Declaration of conformity) for users of the European Union (EU)

This product complies with the following EU directives: 89/336/EEC, 73/23/EEC and 93/68/EEC directives.

This declaration is valid for the region of the European Union.

7 CAUTION

Interference with radio communications.

%This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under EU directives.

For users in countries subject to class B regulations

7 CAUTION

Interference with radio communications.

%This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules.

For users in countries not subject to class B regulations

7 WARNING

Interference with radio communications.

%This is a class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures.

%This device must be used with shielded interface cables. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules.

1-4

bizhub 162/210

Introduction

1

 

Laser safety

This is a digital machine which operates using a laser. There is no possibility of danger from the laser provided the machine is operated according to the instructions in this manual.

Since radiation emitted by the laser is completely confined within a protective housing, the laser beam cannot escape from the machine during any phase of user operation.

This machine is certified as a class 1 laser product. In other words, the machine does not produce hazardous laser radiation.

Internal laser radiation

Specifications

Maximum average radiation

6.32 µW

power

at the laser aperture of the print head unit

 

 

Wavelength

770-795 nm

 

 

This product employs a class 3b laser diode that emits an invisible laser beam.

The laser diode and the scanning polygon mirror are incorporated in the print head unit.

7 WARNING

Incorrect handling may result in hazardous radiation exposure.

%The print head unit is not a field-serviceable item.

%Therefore, the print head unit should not be opened under any circumstances.

 

Laser Aperture of the

Print head

Print Head Unit

 

bizhub 162/210

1-5

1

Introduction

 

CDRH regulation

This machine is certified as a class 1 laser product under radiation performance standard according to the Food, Drug and Cosmetic Act of 1990. Compliance is mandatory for laser products marketed in the United States and is reported to the Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration of the U.S. Department of Health and Human Services (DHHS). This means that the device does not produce hazardous laser radiation.

The label shown on page 1-9 indicates compliance with the CDRH regulations and must be attached to laser products marketed in the United States.

7 CAUTION

Incorrect handling may result in hazardous radiation exposure.

%Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm.

For European users

7 CAUTION

Incorrect handling may result in hazardous radiation exposure.

%Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.

This is a semiconductor laser. The maximum power of the laser diode is 5 mW and the wavelength is 770-795 nm.

1-6

bizhub 162/210

Introduction

1

 

For Denmark users

7 ADVARSEL

Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion.

%Usynlig laserstråling ved åbning, når sikkerhedsafbrydere er ude af funktion. Undgå udsættelse for stråling. Klasse 1 laser produkt der opfylder IEC60825 sikkerheds kravene.

Dette er en halvlederlaser. Laserdiodens højeste styrke er 5 mW og bølgelængden er 770-795 nm.

For Finland, Sweden users

LOUKAN 1 LASERLAITE

KLASS 1 LASER APPARAT

7 VAROITUS

Tämä on puolijohdelaser.

%Laitteen Käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle.

Tämä on puolijohdelaser. Laserdiodin sunrin teho on 5 mW ja aallonpituus on 770-795 nm.

7 VARNING

Det här är en halvledarlaser.

%Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.

Det här är en halvledarlaser. Den maximala effekten för laserdioden är 5 mW och våglängden är 770-795 nm.

bizhub 162/210

1-7

1

Introduction

 

7 VAROITUS

Avattaessa ja suojalukitus ohitettaessa olet alttiina näkymättömälle lasersäteilylle.

%Älä katso säteeseen.

7 VARNING

Osynlig laserstrålning när denna del är öppnad och spärren är urkopplad.

%Betrakta ej strålen.

For Norway users

7 ADVARSEL!

Dette en halvleder laser.

%Dersom apparatet brukes på annen måte enn spesifisert i denne bruksanvisning, kan brukeren utsettes for unsynlig laserstråling som overskrider grensen for laser klass 1.

Dette en halvleder laser. Maksimal effekt till laserdiode er 5 mW og bølgelengde er 770-795 nm.

1-8

bizhub 162/210

Introduction

1

 

Laser safety label

A laser safety label is attached to the outside of the machine as shown below.

Ozone release

7 CAUTION

A negligible amount of ozone is generated during normal operation of this machine.

An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room be well ventilated.

%Locate the machine in a well-ventilated room.

7 ATTENTION

Une quantité d’ozone négligable est dégagée pendant le fonctionnement de l’appareil quand celui-ci est utilisé normalement.

Cependant, une odeur désagréable peut être ressentie dans les pièces dont l’aération est insuffisante et lorsque une utilisation prolongée de l’appareil est effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des conditions de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve l’appareil.

%Placer l’appareil dans une pièce largement ventilée.

bizhub 162/210

1-9

1

Introduction

 

Acoustic noise

For European users

Maschinenlärminformations-Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779.

1-10

bizhub 162/210

Introduction

1

 

1.4Safety information

This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual.

Please read the following section before connecting the machine to the supply. It contains important information related to user safety and preventing equipment problems.

Please keep this manual in a handy place near the machine.

Make sure you observe all of the precautions appear in each section of this manual.

KM_Ver.01E_C

2

Note

Some parts of the contents of this section may not correspond with the purchased product.

Warning and precaution symbols

The following indicators are used on the warning labels or in this manual to categorize the level of safety warnings.

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

%Do not ignore this safety advices.

bizhub 162/210

1-11

1

 

 

 

 

 

 

Introduction

 

 

 

 

 

 

 

 

 

 

 

 

Meaning of symbols

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Symbol

Meaning

Example

Meaning

 

 

 

 

A triangle indicates a danger

 

 

 

This symbol warns against pos-

 

 

 

 

against which you should take

 

 

 

sible causes of burns.

 

 

 

 

precaution.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A diagonal line indicates a pro-

 

 

 

This symbol warns against dis-

 

 

 

 

hibited course of action.

 

 

 

mantling the device.

 

 

 

 

 

 

 

 

 

 

 

 

 

A black circle indicates an im-

 

 

 

This symbol indicates you must

 

 

 

 

perative course of action.

 

 

 

unplug the device.

 

 

 

 

 

 

 

 

 

Disassemble and modification

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-volt- age part or a laser beam source inside that could cause an electrical shock or blindness.

Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness.

1-12

bizhub 162/210

Introduction

1

 

Power cord

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

Use only the power cord supplied in the package. If a power cord is not supplied, only use the power cord and plug that is specified in POWER CORD INSTRUCTION. Failure to use this cord could result in a fire or electrical shock.

Use the power cord supplied in the package only for this machine and NEVER use it for any other product. Failure to observe this precaution could result in a fire or electrical shock.

Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown.

Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

bizhub 162/210

1-13

1

Introduction

 

 

 

 

 

Power source

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock.

Connect power plug directly into wall outlet having the same configuration as the plug. Use of an adapter leads to the product connecting to inadequate power supply (voltage, current capacity, grounding), and may result in fire or shock. If proper wall outlet is not available, the customer shall ask qualified electrician for the installation.

Do not use a multiple outlet adapter nor an extension cord in principle. Use of an adapter or an extension cord could cause a fire or electrical shock.

Contact your authorized service representative if an extension cord is required.

Consult your authorized service representative before connecting other equipment on the same wall outlet. Overload could result in a fire.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

%Do not ignore this safety advices.

Caution

Symbol

 

 

The outlet must be near the equipment and easily accessible. Otherwise you can not pull out the power plug when an emergency occurs.

1-14

bizhub 162/210

Introduction

1

 

Power plug

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.

Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

%Do not ignore this safety advices.

Caution

Symbol

 

 

Do not tug the power cord when unplugging. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.

Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire.

bizhub 162/210

1-15

1

Introduction

 

 

 

 

 

Grounding

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

• Connect the power cord to an electrical outlet that is equipped with a grounding terminal.

 

 

 

 

 

 

1-16

 

bizhub 162/210

Introduction

1

 

Installation

7 WARNING

Ignoring this warnings could cause serious injury or even death.

%Do not ignore this safety advices.

Warning

Symbol

 

 

Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative.

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

%Do not ignore this safety advices.

Caution

Symbol

 

 

After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury.

Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.

Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown.

Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction.

Do not use flammable sprays, liquids, or gases near this product, as a fire could result.

bizhub 162/210

1-17

1

Introduction

 

 

 

 

 

Ventilation

7 CAUTION

Ignoring this cautions could cause injury or damage to property.

%Do not ignore this safety advices.

Caution

Symbol

 

 

Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals.

1-18

bizhub 162/210

Loading...
+ 226 hidden pages