PHKS 1450
2003
|
|
|
|
! @ # ! |
|
|
www.kompernass.com +++ www.kompernass.com +++ www.kompernass.com +++
CIRCULAR SAW PHKS 1450
Dear Customer, We are delighted that you have decided to purchase our high quality PHKS 1450 circular saw. Please make sure you familiarise yourself fully with the way the equipment works before you use it for the first time and that you understand how to handle electrical power tools correctly. Please read the instructions below and the accompanying safety advice carefully. By doing this you will be able to work in complete safety and achieve better results. We hope you enjoy using your circular saw.
PROPER USE
Sawing of solid wood, chipboard, plastic and aluminium. Please note that the blade pre-installed in the saw as supplied is intended for sawing wood only. Any other use or modification to the saw shall be considered as improper use and could give rise to considerable dangers.
FEATURES OF THE PHKS 1450
ON - OFF switch |
|
|
|
Safety switch |
Parallel guide fence |
|
Electronic speed control |
with millimetre scale |
|
Adjustable depth stop |
Retractable guard |
|
Sawdust outlet |
Spindle lock |
|
Bevel cutting capacity |
Illustration showing operation |
|
with angle gauge |
Depth of cut gauge |
|
Guide plate |
Wing screw |
TECHNICAL INFORMATION
Nom. power consumption: |
1450 W |
Nom. voltage: |
230 V 50 Hz |
|
Output torque: |
15 NM max. |
Weight: |
|
6.75 kg |
No load speed: |
n0 1800 - 5000 rpm |
The A-weighted noise level of the equipment |
||
Blade: |
210 x 30 x 1.8 x 2.6 mm |
is typically: |
Sound pressure level: 107.5 dB(A) |
|
Cutting depth at 90°: |
0 - 75 mm |
|
Sound power level : 120.5 dB(A) |
|
Cutting depth at 45°: |
0 - 50 mm |
Hand/arm vibration is typically less than 9.3 m/s2 |
The PHKS 1450 circular saw has INTELLIGENT POWER CONTROL. This automatic power delivery system ensures that for a particular speed range the power output remains constant when working on harder and more resistant materials.
SPECIFIC SAFETY ADVICE
To be read in conjunction with the advice in the accompanying booklet on safety.
The PHKS 1450 circular saw is fitted with an electronic soft start system. This provides a short delay after the ON/OFF switch is actuated before the motor starts up.
Only actuate the spindle lock button after the saw has come to a standstill.
Before starting any work on the machine, e.g. setting the guide plate etc., always take the plug out of the socket.
Never remove chips or splinters while the equipment is operating - always remove the plug from the socket first.
4