Kohler K-8741T, K-8767T, K-11184T, K-8753T, K-8709T User Manual

ODEON

INSTALLATION INSTRUCTIONS

P/S-

VITREOUS CHINA P/S-TRAP TOILET

P-TRAP 180mm K-8711T S-TRAP 255mm K-8753T

S-TRAP 305mm K-8766T

BEFORE YOU BEGIN

Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation sequences. Follow the sections that pertain to your particular installation . This will help you avoid costly mistakes. In addition to proper installation, read all operating and safety instructions.

All information in these instructions is based upon the latest product information available at the time of publication. Kohler China reserves the right to make changes in product characteristics, packaging, or availability at any time withoutnotice.

These instructions contain important care, cleaning, and warranty information-please leave instructions for the consumer.

,

ORDERING INFORMATION

Odeon P-trap 180mm ToiletK-8711T Includes seatK-8741T-* Includes BowlK-8709T Includes TankK-8710T Odeon S-trap 255mm ToiletK-8753T Includes seatK-8741T-* Includes BowlK-11184T Includes TankK-8710T Odeon S-trap 305mm ToiletK-8766T Includes seatK-8741T-* Includes BowlK-8767T Includes TankK-8710T

Service parts

Fill valveK-82984-B Mounting Plate AssyK-1004142 Flush Valve AssyK-1004139

180mm	K-8711T
	K-8741T-*
	K-8709T
	K-8710T
255mm	K-8753T
	K-8741T-*
	K-11184T
	K-8710T
305mm	K-8766T
	K-8741T-*
	K-8767T
	K-8710T

K-82984-B

K-1004142

K-1004139

NOTES

Observe all local plumbing and building codes.
Shut off the water supply.
Seat post holes are on 155mm (6-1/8") centers.		155mm(6-1/8")
Passageways is 60mm (2-3/8").		60mm(2-3/8")
Water depth from rim is 245mm (9-5/8")		245mm(9-5/8")
Ensure that the new drain and shut-off valve have the
correct roughing-in dimensions. See Fig.#1.		1
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
Carefully inspect the new fixture for any sign of damage.
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112. 19.2M).		ASME(A112. 19.2M)

		528137
			, 2004
1037406-T01-A	-1-	Copyright Kohler China Ltd., 2004

TOOLS AND MATERIALS REQUIRED
(Not supplied)	(	)

254mm adjustable wrench

Metal file (file cut)

Tape measure

Tubing cutter

Level

Hacksaw

Putty knife

Screwdriver

Straight pipe coupling

Connection packing

Toilet supply shut-off valve, 10mm (3/8") recommended

WARNING: Risk of external leakage. The fill valve nut has been factory-tightened, wrench tighten 1/4 turn past finger tight.

NOTICE: If no shut-off valve exists, install a shut-off valve below the tank before installing the new toilet.

Flexible hose are recommended to connect the supply line to the fill valve. If you use a rigid connection, take care not to apply side forces to the bottom of the fill valve.

ROUGHING-IN

254mm

10mm(3/8")

1/4

	204														204															204						Unit:mm
											25																20
																																				:
777	10									785	10															776	10
	102								388																394											392
	178
	159						396		90		255											100					305							102
																									95											93
																			484													474
																											736
																		699
					698
								429															428									433
390							337			390									337							390						344				259
									267362			156							158						265362		155					162
		158					166
																																				363

P-trap 8711T	S-trap 8753T	S-trap 8766T
		Fig.#1
		1
INSTALLATION
1. REMOVE EXISTING TOILET	1.
Turn off water supply. flush the toilet and use a sponge to
remove the remaining water from the tank and bowl.	(	)
Disconnect the supply shut-off valve (if present) and remove
the old tank and bowl.
1037406-T01-A	-2-

2. ASSEMBLE TANK BOLTS&WASHERS

Slip bolt heads into mounting plate on bottom of tank. Place large foam washer on base of flush valve. See Fig. #2a. Place tank on bowl and attach with nuts and washers from under bowl. See Fig.#2b.

NOTE: Do not use white cement or high lime content cements to install this toilet. The expansion of cement due to a rise in temperature may make the toilet crack or cause damage. Kohler is not responsible for any damage caused by installation with the use of cement.

Fig.#2a

2a

3. SELECT P-TRAP OR S-TRAP to installation

your toilet according to the drain and shut-off valve's Roughing-in dimensions.

S-trap installation

		0
	0
	1
120		255/305
		50

255/305

Fig.#3a

3a

2.

2a 2b

Fig.#2b

2b

3.

P-trap installation

50

0	0
10
	8
120	1

180

Fig.#3b

3b

1037406-T01-A

-3-