Kicker DL7S12, VL7S12, TL7S10 User Manual

0 (0)

SOLO-BARIC® SUBWOOFER ENCLOSURE

DL7S12 | VL7S12 | TL7S10

Owner’s Manual | English

Manual del Propietario | Español

CAJA DE SUBWOOFER SOLO-BARIC® L7

Benutzerhandbuch | Deutsch

SOLO-BARIC® L7 TIEFTÖNER GEHÄUSE

Manuel d’utilisation | Française

CAISSON DE GRAVES SOLO-BARIC® L7

2017 L7S Enclosure Rev C.indd 1

10/27/2016 10:49:17 AM

 

SOLO-BARIC L7 SUBWOOFER

 

ENCLOSURE OWNER’S MANUAL

Models:

DL7S12 / VL7S12 / TL7S10

Authorized KICKER Dealer:

Purchase Date:

Enclosure Model Number:

Enclosure Serial Number:

IMPORTANT SAFETY WARNING

Prolonged continuous operation of an amplifi er, speaker, or subwoofer in a distorted, clipped or overpowered manner can cause your audio system to overheat, possibly catching fi re and resulting in serious damage to your components and/or vehicle. Amplifi ers require up to 4 inches (10cm) open ventilation. Subwoofers should be mounted with at least 1 inch (2.5cm) clearance between the front of the speaker and any surface.

CHECK THE LOAD

The Solo-Baric L7 subwoofer enclosures are internally wired for a 2 ohm load at the speaker-wire connection terminal. Check to see if your amplifi er is optimized to drive this load.

SOLO-BARIC L7 ENCLOSURES

The Solo-Baric-series enclosures combine KICKER’s award-winning line of subwoofers with computer-modeled and human fi netuned enclosures to offer a level of bass performance never before thought possible from a commercially available, ready-to-install subwoofer system. The VL7S12 enclosure features a 12 inch Solo-Baric L7 subwoofer, the TL7S10 enclosure features a 10 inch Solo-Baric L7 Subwoofer, and the DL7S12 enclosure features two 12 inch Solo-Baric L7 subwoofers.

Plug your subwoofer speaker wire into the terminals using the red connector as

positive and the black connector as negative. Connect the other end of the wire to your subwoofer amplifi er in accordance with its owner’s manual.

Sound Check: Poor bass response? Check the system phasing by reversing the positive and negative speaker connections on the subwoofer. If the bass improves, then the subwoofer was out of phase in reference to the rest of the audio system.

Pro Tip: With a KICKER IQ amplifi er, a pair of KICKER QS speakers, and a few KICKER cables, you’re looking at a full system upgrade that will dominate! KICKER amplifi ers and accessories make it easy to upgrade with your existing or stock source unit. Ask your dealer about KICKER amplifi ers and speaker upgrades to complete your system!

Note: The use of a subsonic fi lter will signifi cantly increase power handling. The power handling specifi cation in this chart is calculated using a 25Hz, 24dB/octave subsonic fi lter.

2

2017 L7S Enclosure Rev C.indd 2

10/27/2016 10:49:28 AM

Kicker DL7S12, VL7S12, TL7S10 User Manual

Subwoofer grills sold separately at your local KICKER dealer

Mount the brackets to the bottom of the enclosure using the supplied smaller screws. Securely attach the enclosure to the vehicle with the supplied larger screws.

IMPORTANT SAFETY WARNING

To avoid potential injury or possible death from forward movement of the enclousre during abrupt stops or accidents, the enclosure must be properly installed and securely fastened to your vehicle. You are soley responsible for securely fastening the enclosure in your vehicle.

PERFORMANCE

Model:

DL7S12

VL7S12

TL7S10

Rated Impedance [Ω]

2

 

2

 

2

 

Sensitivity [1W, 1m]

89.9

86.9

85.87

Continuous Power Handling [Watts RMS]

1500

750

600

Enclosure Depth 1 [in, cm]

16

3/8 (41.5)

14

11/16 (37.2)

6 11/16 (16.9)

Enclosure Depth 2 [in, cm]

19

9/16 (49.7)

18

(45.7)

10

(25.4)

Enclosure Height [in, cm]

16

(40.6)

16

(40.6)

15

(38.1)

Enclosure Width [in, cm]

32

3/8 (82.2)

18

3/4 (47.5)

21

1/2 (54.6)

Note: All specifi cations and performance fi gures are subject to change. Please visit www.kicker.com for the most current information. To get the best performance from your new KICKER Subwoofer, we recommend using genuine KICKER Accessories and Wiring. Please allow two weeks of break-in time for the subwoofer to reach optimum performance.

3

2017 L7S Enclosure Rev C.indd 3

10/27/2016 10:49:28 AM

 

CAJA DE SOLO-BARIC L7

 

MANUAL DEL PROPIETARIO

Modelos:

DL7S12 / VL7S12 / TL7S10

Distribuidor autorizado de KICKER:

Fecha de compra:

Número de modelo del Cajas:

Número de serie del Cajas:

IMPORTANTE ADVERTENCIA DE SEGURIDAD

Funcionamiento continuo prolongado de un amplifi cador, altavoz o subwoofer de una manera distorsionada, recortado o el exceso de potencia puede hacer que el sistema de audio se sobrecaliente, posiblemente la captura de fuego y que resulta en graves daños a sus componentes y / o vehículo. Amplifi cadores requieren hasta 4 pulgadas (10 cm) de ventilación abierta. Subwoofers deben montarse con el aclaramiento (2,5 cm) por lo menos 1 pulgada entre la parte frontal del altavoz y cualquier superfi cie.

VERIFICA LOS OHMIOS

Esta Solo-Baric L7 caja tiene cableado interno para producir una carga de 2 ohmios en las terminales de conexión de cable de altavoz. Asegúrese de que su amplifi cador puede manejar esta carga.

SOLO-BARIC L7 CAJAS

Las cajas ventiladas de la serie Solo-Baric L7 combinan los galardonados subwoofers de Kicker con cajas afi nadas por seres humanos y diseñadas por computadora para ofrecer un rendimiento de bajos que nunca antes se había imaginado que fuera posible obtener de un sistema de subwoofer comercialmente disponible y listo para instalar. Las cajas de la Serie TL7S10 vienen con un Solo-Baric L7 de 10 plg. (25.4 cm), las cajas de la Serie VL7S12 vienen con un Solo-Baric L7 de 12 plg. (30.5 cm), las cajas de la Serie DL7S12 vienen con dos Solo-Baric L7 de 12 plg. (30.5 cm), incorporado de antemano.

Enchufe el cable de altavoz del subwoofer en las terminales. Use el conector rojo como positivo y el negro como negativo. Enchufe el otro extremo de este cable en el amplifi cador del subwoofer de acuerdo con las instrucciones del manual del propietario.

Sound Check: ¿Una respuesta reducida del bajo? El sistema del cheque que sincroniza invirtiendo una conexión de altavoz de positivo a negativo en el canal de estéreo altavoz para sonidos graves (los canales); si el bajo mejora, el altavoz era fuera de fase.

Consejo profesional: Con un amplifi cador KICKER IQ, un par de altavoces KICKER QS y algunos cables KICKER, ¡observará una actualización de todo el sistema que dominará! Los amplifi cadores y accesorios KICKER simplifi can la actualización de su unidad de alimentación existente o en stock. ¡Pregunte a su distribuidor sobre los amplifi cadores KICKER y las actualizaciones de altavoces para completar su sistema!

4

2017 L7S Enclosure Rev C.indd 4

10/27/2016 10:49:29 AM

Loading...
+ 8 hidden pages