Kettler RIGA 07042-700, RIGA 07043-900, RIGA 07043-700, RIGA 07042-900 User Manual

0 (0)

Montageanleitung Tischtennistische

„RIGA“ und „RIGA PRO“

Art.-Nr. 07042-700, 07043-700, 07042-900, 07043-900

D

GB

F

NL

E

I

PL

Der Umwelt zuliebe: Wir drucken auf 100% Altpapier!

GB Assembly Instructions

Before assembling or using the table-tennis table, please read the following instructions carefully. They contain important information for use and maintenance of the equipment as well as for your personal safety. Keep these instructions in a safe place for maintenance purposes or for ordering spare parts.

All KETTLER products are designed in accordance with the latest safety regulations and undergo a constant process of quality control during manufacturing. The knowledge gained in this process is used to constantly improve and develop our products. In order to offer our customers the very best in product quality, we reserve the right to make technical changes at any time. In spite of this, should you have any cause for complaint, please contact your KETTLER dealer.

Note on Safety

The table-tennis table should be used only for its intended purpose, i.e. for playing with suitable table-tennis bats and balls.

All other uses are prohibited and may be dangerous. The manufacturer cannot be held liable for damage or injury caused by improper use of the table.

Damaged or worn components may endanger your safety or shorten the lifespan of the table-tennis table. Replace worn or damaged components immediately and remove the table from use until this has been done. Use only spare parts manufactured by KETTLER.

The table-tennis table complies with all safety regulations. Incorrect repairs, alterations to the design (removal of original parts, addition of other components etc.) may endanger the safety of the user.

Instruct other persons (in particular children) using the table in its correct use, and draw their attention to any potential source

of danger, especially when setting up or dismantling the table.

When setting up or dismantling the table, stay clear of its folding radius.

When folded up, the table-tennis table presents a large surface to the wind. For this reason, ensure that it is stored in a sheltered position.

The table-tennis table may be pushed only into the transport position because there is otherwise a danger of injury.

The unit complies with the standard EN 14468–1:2004.

Depending on frequency of use, check all screws, bolts etc. regularly to ensure that they are in good condition.

Caution: While assembly of the product keep off children’s reach (Choking hazard - contains small parts).

In case of enquiry, please contact your KETTLER dealer.

Handling the equipment

Do not use the table-tennis table until it has been fully and correctly assembled and checked.

Ensure that table-tennis tables which are not weatherproof are not exposed to dampness or rain. Keep them well away from direct sources of heat. Should the surface become warped, lay the table on a level surface for a few days.

Set the table up on a level surface.

Do not cover it with plastic foil, under which condensation may form. We recommend the weatherproof KETTLER tarpaulin, art. no. 07032-000.

For practising without a partner, the table halves can be folded up singly.

For more information on the sport of table-tennis, you are referred to the specialist literature on the subject.

Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the environment. In most cases, a slightly dampened cloth is sufficient.

Waste Disposal: KETTLER products are recyclable. At the end of its useful life please dispose of this article correctly and safely (local refuse sites).

3

GB Assembly Instructions

Instructions for Assembly

The equipment must be assembled with due care by two adult persons.

Ensure that you have received all the parts required (see check list) and that they are undamaged. Should you have any cause for complaint, please contact your KETTLER dealer.

Before assembling the equipment, study the drawings carefully and carry out the operations in the order shown by the diagrams. The correct sequence is given in capital letters.

Please note that there is always a danger of injury when working with tools or doing manual work. Therefore please be careful when assembling this machine.

Ensure that your working area is free of possible sources of danger, for example don’t leave any tools lying around. Always dispose packaging material in such a way that it may not cause any danger. There is always a risk of suffocation if children play with plastic bags!

List of spare parts

When ordering spare parts, always state the full item number, spare-partnumber, the quantity required and the S/N of the product (see spare parts drawing).

Example order: item no. 07042-700 / spare-part no. 10100016 / 2 pieces / S/N......

Important: spare part prices do not include fastening material; if fastening material (bolts, nuts, washers etc.) is required, this

The fastening material required for each assembly step is shown in the diagram inset. Use the fastening material exactly as instructed.

Bolt all the parts together loosely at first, and check that they have been assembled correctly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tighten nuts completely against resistance (locking device). Then check that all screw connections have been tightened firmly. Attention: once locknuts have been unscrewed they no longer function correctly (the locking device is destroyed), and must be replaced.

For technical reasons, we reserve the right to carry out preliminary assembly work (e.g. addition of tubing plugs).

Please keep original packaging of this article, so that it may be used for transport at a later date, if necessary. Goods may only be returned after prior arrangement and in (internal) packaging, which is safe for transportation, in the original box if possible. It is important to provide a detailed defect description / damage report!

should be clearly stated on the order by adding the words „with fastening material“.

GB KETTLER GB Ltd. · KETTLER House, Merse Road · North Moons Moat · Redditch, Worcestershire B98 9HL

USA KETTLER International Inc. 1355 London Bridge Road · Virginia Beach, VA 23453

http://www.kettler.net

Checkliste (Packungsinhalt)

GB

Checklist (contents of packaging)

 

E

Lista de control (contenido del paquete)

 

 

F

Liste de vérification (contenu de l’emballage)

 

I Lista di controllo (contenuto del pacco)

 

 

 

NL

Checklijst (verpakkingsinhoud)

 

PL Lista kontrolna (zawartość opakowania)

 

 

 

 

2x

 

2x

6x

 

 

 

 

 

 

 

(7043)

 

(7042)

 

 

 

 

 

 

 

 

 

 

 

 

 

2x

 

 

 

 

 

 

 

 

 

 

1x

1x

2x

2x

 

 

 

 

 

2x

 

 

 

 

 

 

 

 

 

 

4x

 

2x

1x

 

 

 

 

 

 

 

 

2x

2x

 

 

 

 

 

 

4x

 

2x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2x

1x

 

 

 

 

4x M8x110

4x M6x60

2x M8

 

 

 

 

 

4x ø26

2x M8x120

4x M6x55

8x M6

2x

22x ø12

2x

 

4x

4x M6x35

 

 

 

 

 

 

 

 

 

 

4x M6

2x

18x ø16

8x

 

4x

4x M8x45

6x M6x36

4x M8

2x

10x ø25

2x ø20

4x

D

Sie benötigen zusätzlich folgendes Werkzeug (Gehört nicht zum Lieferumfang):

 

GB

You also need the following tools (Not included):

 

F

Vous avez besoin de cet util en complément (con compris dans la livraison)

 

NL

U heeft tevens volgend gereedschap nodig (Is niet in de levering ingesloten):

 

E

Usted necesita adicionalmente la siguiente herramienta (no pertenece al volumen

de suministro):

I

Per eseguire il montaggio, Vi occorre il seguente attrezzo (non è incluso nel volume di fornitura):

 

 

 

PL

Dodatkowo potrzebne są następujące narzędzia (nie objęte zakresem dostawy):

SW13

SW10

2x

2x

1x

11

Kettler RIGA 07042-700, RIGA 07043-900, RIGA 07043-700, RIGA 07042-900 User Manual

Actuel size of hardware

 

M8x120

 

M8x110

 

M8x45

 

M6x60

 

M6x55

 

M6x35

 

M6x37

M6

M6

M8

M6

ø16x6

M8

ø12x6

ø12x6

ø25x8

ø20x6

6x9.5

ø26x19

 

12

Messhilfe für Verschraubungsmaterial

GB

 

Measuring help for screw connections

E

Ayuda para la medición del material de atornilladura

F

 

 

Gabarit pour système de serrage

I

Misura per materiale di avvitamento

NL

 

 

Meethulp voor schroefmateriaal

PL

Wzornik do połączeń śrubowych

 

 

 

 

 

Beispiele

Examples

Examples

Bij voorbild

Ejemplos

 

 

 

 

 

 

 

 

 

M5x40

 

 

 

 

 

 

M5x40

 

 

 

 

˘22

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

˘16

 

 

 

 

 

M8x40

 

 

 

 

 

˘3,9x13

 

 

 

 

 

 

 

 

M6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

˘12

 

 

M5

0

10

20

30

40

50

60

70

80

90

100

110

120

130

140

150

160

170

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

!

 

 

 

 

 

!

 

 

 

 

 

 

 

 

4x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

M6x35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ø12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

13

Loading...
+ 11 hidden pages