Kettler KT499-200, KT499-400 User Manual.pdf

3.76 Mb
Loading...

Verso® Cologne

Model KT499-200 (Cobalt Blue)

Model KT499-400 (Pearl White)

Picture Similar

KETTLER® International, Inc.

1355 London Bridge Road

Virginia Beach, Virginia 23453 USA

www.KETTLERusa.com

DO NOT RETURN TO STORE. Contact Parts and Service for replacement parts, parts@kettlerusa.com / 866-804-0440

Instructions

Additional safety information is available in the Kettler® Bike Manual supplied separately from this bicycle. Contact our Parts Department to obtain a comprehensive Kettler® Bike Manual, parts@kettlerusa.com or 866-804-0440

2

Folding Bike Parts

D

A

E

G

B

C

F

A.Seat Assembly (includes: saddle and seatpost)

B.Quick Release Lever

C.Double-Lock Quick release Frame Lock

D.Handlebar Assembly (includes: adjustable handlebars, handlebar stem, grips, shifter and brake levers)

E.Quick Release Handlebar/Stem Lock

F.Folding Pedal

G.Luggage Rack (including bungee cord)

3

Unfolding

As Easy as 1—2—3!

1. Unfold and lock the frame

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Release the Hook & Loop strap holding the

1a

 

 

 

 

 

1b

 

 

 

frame to the luggage rack and wrap around the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

frame tube for storage see figs. 1a & 1b.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Standing on the chain side of the bike, swing the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

front and rear halves of the bike into position.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Slightly lift up the quick connect lever, spring

 

 

 

 

 

 

 

 

 

 

 

 

 

 

loaded locking pin assembly to allow the two

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1c

 

 

 

 

 

1d

 

 

halves of the frame to align. Release the assem

-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

bly, allowing the locking pin to engage into posi-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

tion, see fig. 1c. Rotate the assembly into its

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

safety lock position and fold down the quick con-

 

 

 

 

 

 

 

 

 

 

 

nect lever. Be sure that the spring loaded bolt is

 

 

 

 

 

 

 

 

 

 

 

tight and the fold down lever rests against the

 

 

 

 

 

 

 

 

 

 

 

surface, see fig. 1d. It should lock firmly in place.

 

 

 

 

 

 

 

 

 

 

 

Always ensure the connection is properly se-

 

 

 

 

 

 

 

 

 

 

 

cured before riding.

 

 

 

 

 

 

 

 

 

 

 

2. Unfold and lock the handlebars

 

 

2

Swing the handlebar assembly up into position,

 

align the wedge shaped

 

block into upright position

 

and tighten the handle

 

bar lock handle, see fig. 2.

 

Always ensure it is secure-

 

ly tight before riding.

 

3. Unfold and lock the pedals

3a

 

The folded pedal is held in position by a spring

 

 

loaded locking mechanism, see fig. 3a. Simply

 

 

unfold the pedal and ensure it locks into its rid-

 

 

ing position, see fig. 3b. Release the pedal as-

 

 

sembly making sure it locks into position to se-

 

 

cure the pedal, see fig. 3c. Repeat for other pedal.

 

 

Adjust the seat assembly for comfortable rider posi-

 

 

tion as described in this manual. Always ensure the

3b

3c

seat clamp is securely tightened before riding.

 

 

4

Folding

As Easy As 3—2—1!

3. Unlock and fold the pedals

Using your thumb, compress and hold the spring

 

loaded pedal assembly as you fold the pedal into

 

3a

its folded position, see figs. 3a-3c.

 

 

 

2. Unlock and fold the handlebars

Release the quick connect locking lever, then

 

 

swing the lever out of its captive slot. Swing the

 

 

handlebar assembly down to the side of the

 

 

frame, see fig. 2.

 

 

 

3b

3c

1. Unfold and lock the frame

 

 

Standing on the chain

 

 

side of the bike, release

 

 

the frame lock quick con-

 

 

nect lever, see fig. 1a.

 

 

Rotate the quick connect

 

2

lever, spring loaded bolt

 

 

 

and locking pin assembly

 

 

away from the frame. Slightly lift up on the quick

 

 

connect lever, spring loaded locking pin assembly

 

 

to allow the locking pin to disengage and the two

 

 

halves of the frame to separate, see fig 1b. Swing

 

 

the front and rear halves of the bike together.

1a

1b

Use the Hook & Loop strap to hold the frame in

 

 

the folded position by wrapping it around part of

 

 

the luggage rack, see figs. 1c & 1d.

 

 

Optional-Seat Assembly

 

 

 

 

 

 

 

 

 

To save additional space, you can lower the seat

 

 

 

 

 

 

 

 

 

assembly all the way down to the frame or com-

 

 

 

 

 

 

 

 

 

 

 

1c

 

 

 

1d

 

 

pletely remove it from the frame. Pull up the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

quick release seat lever and flip over. Allow the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

seat assembly to slide all the way down to the

 

 

 

 

 

 

 

 

 

frame or remove it completely.

 

 

 

 

 

 

 

 

 

Adjustments

Seatpost

You can easily and quickly adjust the height of the seatpost to fit almost any rider

Locate the Quick Release seat lever. Lift the lever and flip open. Adjust the seatpost as desired. Flip the lever back over to tighten. Make sure lever is always completely tightened before riding.

Caution: If the Seat Assembly can still turn from side to side or slide up and down, tighten the tension adjusting nut on the other side of the Quick Release lever before securing.

Stem

You can easily and quickly adjust the height of the stem to fit almost any rider

Locate the Quick Release seat lever. Lift the lever and flip open. Adjust the stem as desired. Flip the lever back over to tighten. Make sure lever is always completely tightened before riding.

Caution: If the stem can still slide up and down, tighten the tension adjusting nut on the other side of the Quick Release lever before securing.

6

Limited Warranty

THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, MADE BY EITHER THE DISTRIBUTOR OR

THE MANUFACTURER ON KETTLER PRODUCTS, EXCEPT THE MANUFACTURER’S LIMITED WARRAN-

TY AGAINST DEFECTS IN MATERIAL SET OUT BELOW:

This KETTLER Limited Warranty applies to products sold through the KETTLER Authorized Dealer Network to the original retail purchaser and authenticated by proof of purchase from a retailer located in the United States or Canada. Any shipments made under this warranty will be shipped to the United States or Canada only. Any shipment outside of the United States will be at the sole cost of the customer. This KETTLER Limited Warranty is a manufacturer’s warranty and is not changed or modified by additional warranties extended by individual retailers at the point of sale. Manufacturer warrants this product to be free from defects in material at the time of the product’s tender of delivery for a period of 1 year for residential use. This Limited Warranty is not transferable and does not cover normal wear and tear (including, but not limited to, damage and wear to cable housings, tires, tubes, suspension forks, and other non-durable parts). The liability of the manufacturer under this Limited Warranty shall not include any liability for direct, indirect, or consequential damages resulting from the defect. This Limited Warranty is void if the product is damaged by accident, unreasonable use, improper service, failure to follow instructions provided, modification from its original state, or other causes determined not arising out of defects in material.

This warranty gives you specific legal rights. Should this product become defective due to material within the warranty period, contact KETTLER Parts & Service Dept. by phone at 866.804.0440, fax at 757.563.9273, or e-mail at parts@kettlerusa.com. When making a claim, return of the defective part and/or pictures of the defective item may be required for claim. The limited warranty provides replacement parts; defective parts will be repaired, replaced, or substituted with the same part or a part of equal value. The limited warranty does not cover the cost of labor and/or repair.

THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND OF ANY OTHER OBLIGATIONS OR LIABILITY ON THE PART OF THE MANUFACTURER. KETTLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH SUCH PRODUCTS.

7