Kenwood KDC-CPS82, KDC-CX85, KDC-C302, KDC-CX82, KDC-CPS87 User Manual

...
0 (0)

KDC-219 KDC-2019V KDC-2019 KDC-29MR KDC-119 KDC-119S KDC-217 KDC-217S

CD-RECEIVER

INSTRUCTION MANUAL

AMPLI-TUNER-LECTEUR DE CD

MODE D’EMPLOI

REPRODUCTOR DE DISCOS COMPACTOS RECEPTOR DE FM/AM

MANUAL DE INSTRUCCIONES

RECEPTOR DE CD

MANUAL DE INSTRUÇÕES

Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your KENWOOD dealer for information or service on the product.

Model KDC-219, KDC-2019V, KDC-2019, KDC-29MR, KDC-119, KDC-119S, KDC-217, KDC-217S Serial number

© B64-2114-00 (KWN)

English

Contents

Warning .......................................

3

Safety precautions......................

4

About CDs...................................

6

General features .........................

7

Power

Selecting the Source

Volume

Attenuator

Loudness

System Q

Audio Control

Speaker Setting

Clock Display

Adjusting Clock

DSI (Disabled System Indicator)

Theft Deterrent Faceplate

Tuner features

...........................10

Tuning Mode

Tuning

Station Preset Memory

Auto Memory Entry

Preset Tuning

CRSC (Clean Reception System Circuit)

CD/External disc control

 

features ..................................

12

Playing CD

Playing External Disc

Fast Forwarding and Reversing

Track Search

Album Search

Track/Album Repeat

Track Scan

Random Play

Magazine Random Play

Basic Operations of remote......

15

Loading and Replacing the battery

 

Basic operations

 

In Tuner source

 

In Disc source

 

Accessories...............................

17

Installation Procedure ..............

17

Connecting Wires to Terminals 18

Installation ................................

19

Troubleshooting Guide .............

21

Specifications ...........................

24

— 2 —

2Warning

2CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

In compliance with Federal Regulations, following are reproductions of labels on, or inside the product relating to laser product safety.

KENWOOD CORPORATION 2967-3, ISHIKAWA-CHO, HACHIOJI-SHI

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment may cause harmful interference to radio communications, if it is not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

NOTE

This Class B digital apparatus complies with Canadian ICES-003.

— 3 —

English

Safety precautions

2WARNING

2CAUTION

To prevent injury or fire, take the following precautions:

Insert the unit all the way in until it is fully locked in place. Otherwise it may fall out of place when jolted.

When extending the ignition, battery, or ground wires, make sure to use automotivegrade wires or other wires with a 0.75mm2 (AWG18) or more to prevent wire deterioration and damage to the wire coating.

To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

If the unit starts to emit smoke or strange smells, turn off the power immediately and consult your Kenwood dealer.

Make sure not to get your fingers caught between the faceplate and the unit.

Be careful not to drop the unit or subject it to strong shock.

The unit may break or crack because it contains glass parts.

Do not touch the liquid crystal fluid if the LCD is damaged or broken due to shock. The liquid crystal fluid may be dangerous to your health or even fatal.

If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

To prevent damage to the machine, take the following precautions:

Make sure to ground the unit to a negative 12V DC power supply.

Do not open the top or bottom covers of the unit.

Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

Do not set the removed faceplate or the faceplate case in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.

Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

To prevent a short circuit when replacing a fuse, first disconnect the wiring harness.

Do not place any object between the faceplate and the unit.

Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

IMPORTANT INFORMATION About the disc changer to be connected:

To connect a disc changer having the "O-N" switch to this unit, set the "O-N" switch to "N". To connect a disc changer having no "O-N" switch to this unit, the converter cord CADS100 and/or switching adapter KCA-S210A are required as options.

A disc changer doesn't work when it is connected without using these options.

If a model with no "O-N" switch is connected, some unavailable functions and information that cannot be displayed are generated. Note that none of the KDC-C100, KDC-C302, C205, C705, and non-Kenwood CD changers can be connected.

You can damage both your unit and the CD changer if you connect them incorrectly.

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

— 4 —

NOTE

If you experience problems during installation, consult your Kenwood dealer.

If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer.

Press the reset button if the Disc auto changer fails to operate correctly. Normal operatin should be restored.

Reset button

Characters in the LCD may become difficult to read in temperatures below 41 ˚F (5 ˚C).

The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may represent something impossible in actual operation.

Cleaning the Faceplate Terminals

If the terminals on the unit or faceplate get dirty, wipe them with a dry, soft cloth.

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe neutral detergent off.

Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.

Cleaning the CD Slot

As dust tends to accumulate in the CD slot, clean it every once in a while. Your CDs can get scratched if you put them in a dusty CD slot.

Lens Fogging

Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

— 5 —

English

About CDs

Handling CDs

• Don’t touch the recording surface of the CD.

CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc.

Don’t stick tape etc. on the CD.

Also, don’t use a CD with tape stuck on it.

When using a new CD

If the CD center hole or outside rim has burrs, use it after removing them with a ball pen etc.

Burrs

Burrs

CD accessories

Don’t use disc type accessories.

CD cleaning

Clean from the center of the disc and move outward.

Removing CDs

When removing CDs from this unit pull them out horizontally.

CDs that can’t be used

• CDs that aren’t round can’t be used.

CDs with coloring on the recording surface or that are dirty can’t be used.

Don’t use CDs without disc mark

.

A CD-R or CD-RW that hasn’t been finalized can’t be played. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.)

CD storage

Don’t place them in direct sunlight (On the seat or dashboard etc.) and where the temperature is high.

Store CDs in their cases.

6 —

Kenwood KDC-CPS82, KDC-CX85, KDC-C302, KDC-CX82, KDC-CPS87 User Manual

General features

Release button

(KDC-219/KDC-2019V/KDC-2019/

KDC-29MR/KDC-217/KDC-217S only)

AM

FM

ud

 

4 ¢

SRC ATT/ #1

#3

CLK/

Q/

LOUD

 

ADJ

AUD

KDC-219/KDC-2019V/KDC-2019/KDC-29MR/KDC-217/KDC-217S

ATT indicator

LOUD indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clock indicator

Clock display

SYSTEM Q indicator

 

KDC-119/KDC-119S

 

LOUD indicator

Clock display

 

ATT indicator

SYSTEM Q indicator

Clock indicator

Power

Turning ON the Power

Press the [SRC] button.

Turning OFF the Power

Press the [SRC] button for at least 1 second.

Selecting the Source

Press the [SRC] button.

 

Source required

Display

Tuner

"TUnE"

CD

"CD"

External disc

"DISC"

(Function of the KDC-219/KDC-2019V/KDC-2019/KDC-29MR)

Standby (Illumination only mode)

"OFF"

Volume

Increasing Volume

Press the [u] button.

Decreasing Volume

Press the [d] button.

Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time the button is pressed the Attenuator turns ON or OFF. When it’s ON, the "ATT" indicator blinks.

— 7 —

English

General features

Loudness

Compensating for low and high tones during low volume.

Press the [LOUD] button for at least 1 second.

Each time the button is pressed for at least 1 second the Loudness turns ON or OFF.

When it’s ON, "LOUD" indicator is ON.

System Q

You can recall the best sound setting preset for different types of the music.

1Select the source to set

Press the [SRC] button.

2Select the Sound type

Press the [Q] button.

Each time the button is pressed the sound setting switches.

Sound setting

Display

Flat

"SQ-1"

Rock

"SQ-2"

Top 40

"SQ-3"

Pops

"SQ-4"

Jazz

"SQ-5"

Easy

"SQ-6"

Scan of Flat — Easy

"SCAn"

Each setting value is changed with the <Speaker setting> (page 8).

First, select the speaker type with the Speaker setting.

When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values.

Audio Control

1Select the source for adjustment

Press the [SRC] button.

2Enter Audio Control mode

Press the [AUD] button for at least 1 second.

3Select the Audio item for adjustment

Press the [FM] or [AM] button.

Each time the button is pressed the items that can be adjusted switch as shown below.

4Adjust the Audio item

Press the [4] or [¢] button.

Adjustment Item

Display

Range

Bass level

"BAS"

–8 — +8

Middle level

"MID"

–8 — +8

Treble level

"TRE"

–8 — +8

Balance

"BL"

Left 15 — Right 15

Fader

"FD"

Rear 15 — Front 15

5Exit Audio Control mode

Press the [AUD] button.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button.

Select the "OFF" display.

2Enter Speaker Setting mode

Press the [Q] button.

— 8 —

Loading...
+ 17 hidden pages