KDC-X895
KDC-BT848U
KDC-X595
KDC-448U
CD-RECEIVER
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the modified pages.
Check the latest edition
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2010 Kenwood Corporation All Rights Reserved. |
IM327_Ref_K_en_00 |
Before use |
4 |
Component names |
6 |
Function setting |
6 |
Function setting operation |
|
Audio adjustments |
7 |
Audio control |
|
Audio preset Memory |
|
Audio preset recall |
|
iPod control operation |
9 |
Music search |
|
Alphabet search |
|
Related search |
|
Direct search |
|
Skip search |
|
Skip search ratio setting |
|
Play mode |
|
Registering a song in the playlist |
|
Playing the playlist |
|
Deleting a song from the playlist |
|
Music disc/Audio file (CD or USB) |
|
Operation |
14 |
Music search |
|
Skip search |
|
Play mode |
|
Direct music search |
|
Basic operation of Disc changer (Optional) |
|
Direct search in Disc changer (Optional) |
|
Tuner Operation |
18 |
Auto memory |
|
Seek mode setting |
|
Tuner setting |
|
Direct access tuning |
|
PTY (Program Type) |
|
Program Type preset |
|
Log memory |
22 |
Log memory recall |
|
Log memory item lock |
|
Deleting a Log memory item |
|
Log memory category setting |
|
Tuner Log memory time setting |
|
Display settings |
26 |
Selecting display type |
|
Selecting text display |
|
Information display setting |
|
Illumination color selection |
|
Display & Illumination setting |
|
General operation |
30 |
Adjusting the Clock
Adjusting the Date Dual clock display
Clock & Date display type setting Auxiliary input display setting
Muting the audio upon reception of phone call Initial setting
Demonstration mode Setting
Operation of hands-free phoning |
36 |
Before use |
|
Registering cell-phone |
|
Receiving a call |
|
Calling a number in the Phone book |
|
Dialing a number |
|
Calling a number in the call log |
|
Speed dialing (Preset dial) |
|
Registering to the Preset dial number list |
|
During a call |
|
Call waiting |
|
Clearing the Disconnection message |
|
Making a voice dialing call |
|
Displays of phone number type (category) |
|
Bluetooth audio operation |
44 |
Before Use |
|
Basic operation |
|
Bluetooth setup |
46 |
Registering Bluetooth device |
|
Registering Special bluetooth device |
|
Registering PIN Code |
|
Downloading the Phone book |
|
Selecting the Bluetooth device you wish to |
|
connect |
|
Deleting a registered Bluetooth device |
|
Displaying the firmware version |
|
Adding a voice dialing command |
|
Setting a voice command for category |
|
Bluetooth detail setting |
|
SMS (Short Message Service) |
53 |
Displaying the SMS |
|
Downloading the SMS |
|
2 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
HD Radio™ tuner control |
54 |
Basic Operation |
|
Station preset memory |
|
Preset tuning |
|
Auto memory |
|
Seek mode setting |
|
iTunes tagging |
|
Direct access tuning |
|
HD Radio setting |
|
Satellite radio tuner (Optional accessory) |
|
control |
58 |
Basic operation |
|
Category and Channel search |
|
Channel preset memory |
|
Preset tuning |
|
Channel scan |
|
Direct access tuning |
|
Seek mode setting |
|
Electronic serial number display |
|
Basic operations of remote control |
62 |
General control |
|
In Tuner source |
|
HD Radio source |
|
In CD/Audio file source |
|
In iPod source |
|
In Satellite radio tuner source |
|
Hands-free phone control |
|
Appendix |
64 |
Troubleshooting guide |
66 |
Specifications |
68 |
English | 3
Before using this unit for the first time
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the Demonstration mode. Refer to <Exit Demonstration Mode> (page 4) of Quick start guide.
2 WARNING
To prevent injury or fire, take the following precautions:
•Stop the car before operating the unit.
•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
¤ CAUTION
•Adjust the volume so that you can hear sounds outside the car. Driving with the volume too high may cause an accident.
•Wipe off the dirt on the panel with a dry silicon or soft cloth.
Failure to observe this precaution may result in damage to the monitor or unit.”
Cleaning the connector
Wipe off dirt on the connector of the unit and panel. Use a cotton swab or cloth
Condensation
When the car is air-conditioned, moisture may collect on the laser lens. This may cause disc read errors. In this case, remove the disc and wait for the moisture to evaporate.
Notes
•If you experience problems during installation, consult your Kenwood dealer.
•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.
•Characters that conform to ISO 8859-1 can be displayed.
•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.
About discs used with this unit
•This unit can only play the CDs with .
•The following discs cannot be used:
-- Discs that are not round
-- Discs with coloring on the recording surface or discs that are dirty
-- Recordable/Rewritable disc that has not been finalized (For the finalization process, refer to your disc writing software, and your disc recorder instruction manual.)
-- 8 cm (3 inch) disc (Attempt to insert using an adapter can cause malfunction.)
Handling discs
•Do not touch the recording surface of the disc.
•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•Do not use any accessories for the disc.
•Do not use any solvents to clean discs. Use a dry silicon or soft cloth.
•Clean from the center of the disc and move outward.
•When removing discs from this unit, pull them out horizontally.
•Remove the rims from the center hole and disc edge before inserting a disc.
How to reset your unit
If the unit fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Reset button
4 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
English | 5
Component names |
Function setting |
|
|
1 234 |
5 |
6 |
W Q |
P |
9 |
8 7 |
Preferences of this unit can be set in the Function setting mode. For detailed setting procedure and items, refer to the explanation for each source function.
1Select the source
Press the [SRC] button.
Switch to the source to display the items to set.
1 |
[ ] button |
2 |
Release button |
3 |
[SRC] button |
4 |
Control knob |
5 |
[PRESET] button |
6 |
[0] button |
7 |
USB terminal |
8 |
Auxiliary input |
9 KDC-X895 KDC-BT848U
[] [] button
KDC-X595 KDC-448U
[iPod] button
O [LOG] button
Q [DISP] button
W [] button
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Function item
Turn the Control knob to display the item to set, and then press the Control knob.
Press the [] button to return to the previous item.
Example:
Play Mode |
|
|||||||
Settings |
|
|
AUX Name Set |
|
||||
|
|
|||||||
|
|
|
||||||
|
|
|
|
|
|
|
||
|
|
|
|
Clock&Date |
|
|
Summer Time |
|
|
|
|
|
|
||||
Initial Settings |
|
|
||||||
|
|
|
|
|||||
|
|
|
|
|
|
Clock Adjust |
||
|
|
DISP&ILLUMI |
|
|
||||
|
|
|
|
|
|
Date Mode |
||
|
|
|
|
|||||
|
|
|
|
|
|
|
|
In this Instruction manual, the procedure to select “Clock Adjust” item in the Function setting layer as above is described as the following example:
“Settings” > “Clock&Date” > “Clock Adjust”.
4Determine the setting value
Turn the Control knob to display the value to set, and then press the Control knob.
The previous item is displayed.
5Exit Function setting mode
Press the [] button for at least 1 second.
6 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
You can adjust following Audio Control items;
Display |
Audio item |
Range |
|||
“SubWoofer Level” |
Subwoofer level |
–15 — +15 (dB) |
|||
“Bass Boost” |
Bass Boost |
Level1/Level2/OFF |
|||
“System Q” |
Preset Equalizer |
“Rock”/ “Pops”/ “Easy”/ |
|||
|
|
|
|
curve |
“Top40”/ “Jazz”/ ”Game”/ |
|
|
|
|
|
“Natural”/ “User”‡ |
|
“Bass Adjust” |
|
|
||
|
|
“Bass Center FRQ” |
Bass Center |
40/50/60/70/80/100/ |
|
|
|
|
|
Frequency* |
120/150 (Hz) |
|
|
|
“Bass Level” |
Bass level |
–8 — +8 (dB) |
|
|
“Bass Q Factor” |
Bass Q Factor* |
1.00/1.25/1.50/2.00 |
|
|
|
“Bass EXT” |
Bass Extend* |
OFF/ON |
|
|
“Middle Adjust” |
|
|
||
|
|
“Middle Center |
Middle Center |
0.5/1.0/1.5/2.0 (kHz) |
|
|
|
FRQ” |
Frequency* |
|
|
|
|
“Middle Level” |
Middle level |
–8 — +8 (dB) |
|
|
|
“Middle Q Factor” |
Middle Q Factor* |
1.0/2.0 |
|
|
“Treble Adjust” |
|
|
||
|
|
“Treble Center FRQ” Treble Center |
10.0/12.5/15.0/17.5 kHz |
||
|
|
|
|
Frequency* |
|
|
|
|
“Treble Level” |
Treble level |
–8 — +8 (dB) |
|
“Balance” |
Balance |
Left 15 — Right 15 |
||
“Fader” |
Fader |
Rear 15 — Front 15 |
|||
“2Zone Rear Volume” |
Rear volume during |
0 — 35 |
|||
|
|
|
|
Dual zone |
|
|
“SubWoofer” |
Subwoofer output |
OFF/ON |
||
“Detailed Settings” |
|
|
|||
|
|
“HPF Front” |
Front High Pass |
Through/40*/60*/80/ |
|
|
|
|
|
Filter |
100/120/150/180/220* |
|
|
|
|
|
(Hz) |
|
|
|
“HPF Rear” |
Rear High Pass Filter |
Through/40*/60*/80/ |
|
|
|
|
|
100/120/150/180/220* |
|
|
|
|
|
(Hz) |
|
|
|
“LPF SubWoofer” |
Low Pass Filter |
50*/60/80/100*/120/ |
|
|
|
|
|
Through (Hz) |
|
|
|
“SubWoofer Phase” Subwoofer Phase |
Reverse (180°)/ |
|
|
|
|
|
|
Normal (0°) |
|
|
|
“2Zone” |
Dual Zone System |
ON/OFF |
|
|
“2Zone F/R Select” |
Dual Zone output |
Rear/Front |
|
|
|
|
|
channel |
|
|
|
|
“Supreme” |
Supreme setting |
ON/OFF |
|
|
“Audio Preset” |
Audio Preset |
Recall/Memory |
|
|
|
|
|
memoy† |
|
|
|
|
“Volume Offset |
Volume offset |
–8 — ±0 (dB) |
|
|
ADJ” |
|
(AUX: -8 — +8) |
*Function of KDC-X895/ KDC-X595.
†Refer to <Audio preset Memory> (page 8), <Audio preset recall> (page 8).
‡“User”: The customized Bass, Middle, and Treble levels are effective.
⁄
•You can set Bass, Middle, and Treble for each source. About Supreme
Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate (less than 128Kbps, Sampling frequency is 44.1kHz).
Supplementing is optimized by compression format (AAC, MP3 or WMA) and processed according to bit rate.
The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.
•About Dual Zone System
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
-When “2Zone” is set to “ON”, the main source sound and AUX input sound are output to the front speakers and rear speakers separately.
-Set up the channel of sub source by “2Zone”.
-Select Main source by [SRC] button.
-Adjust the volume of Front channel by Control knob.
-Adjust the volume of Rear channel by “2Zone Rear Volume”.
-The Audio Control has no effect on sub source.
-When Bluetooth audio source is selected, set “2Zone F/R Select” to “Rear”. “2Zone” cannot be turned “ON” when this is set to “Front”. While “2Zone” is turned “ON”, “2Zone F/R Select” function is disabled.
1Select the source to adjust
Press the [SRC] button.
2Enter Audio control mode
Press the Control knob.
3Select the Audio item to adjust
Turn the Control knob to select the audio item for adjustment and then press the Control knob.
Press the [ ] button to return to the previous item.
4Adjust the Audio item
Turn the Control knob to display the value to set, and then press the Control knob.
The previous item is displayed.
5Exit Audio control mode
Press the [] button for at least 1 second.
English | 7
Audio adjustments
Registering the value setup by Audio Control.
1Setup Audio control
Setup the <Audio control> (page 7).
2Enter Audio control mode
Press the Control knob.
3Select Audio preset memory mode
The item can be selected and determined as follows.
“Detailed Settings” > “Audio Preset”
To select the item, turn the Control knob. To determine the item, press the Control knob.
4Select the Audio preset memory
Turn the Control knob to select “Memory”, and then press the Control knob.
5Turn the Control knob to select “YES”, and then press the Control knob.
“Memory Completed” is displayed.
6Exit Audio Control mode
Press the [] button for at least 1 second.
⁄
•Register 1 pair of Audio Preset Memory. You cannot register by the source.
•When you press the Reset, all the sources will be the setting value which is registered.
•The following items can be registered.
“Bass Center FRQ”, “Bass Level”, “Bass Q Factor”, “Bass EXT”, “Middle Center FRQ”, “Middle Level”, “Middle Q Factor”, “Treble Center FRQ”, “Treble Level”, “SubWoofer Level”, “HPF Front”, “HPF Rear”, “LPF SubWoofer”, “SubWoofer Phase”
Recalling the sound setup registered by <Audio preset Memory> (page 8).
1Select the source
Press the [SRC] button.
2Enter Audio control mode
Press the Control knob.
3Select Audio preset memory mode
The item can be selected and determined as follows.
“Detailed Settings” > “Audio Preset”
To select the item, turn the Control knob. To determine the item, press the Control knob.
4Select the Audio preset recall
Turn the Control knob to select “Recall”, and then press the Control knob.
5Turn the Control knob to select “YES”, and then press the Control knob.
“Recall Completed” is displayed.
6Exit Audio Control mode
Press the [] button for at least 1 second.
8 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
For basic operation to playback iPod contents, refer to the Quick Start Guide.
Searching for the song you want to play.
1Enter Music search mode
Press the [] button.
“MUSICSEARCH” is displayed.
2Search for music
Operation type |
|
Operation |
|
Movement between items |
|
Turn the Control knob. |
|
Move to the Alphabet |
|
Press the [ |
] button for at least 1 |
search mode |
|
second. Refer to <Alphabet search> |
|
|
|
(page 9). |
|
Selection of item |
|
Press the Control knob. |
|
Return to previous item |
|
Press the |
] button. |
Return to Top menu |
|
Push the Control knob towards left for at |
|
|
|
least 1 second. |
Cancelling the Music search mode
Press the [] button for at least 1 second.
⁄
•If no characters included in a song name can be displayed, the browse item name and digits are displayed.
Items |
|
Display |
|
Items |
|
Display |
Playlists |
|
“PLIST***” |
|
Podcasts |
|
“PDCT***” |
Artists |
|
“ART***” |
|
Genres |
|
“GEN***” |
Albums |
|
“ALB***” |
|
Composers |
|
“COM***” |
Songs |
|
“PRGM***” |
|
|
|
|
You can select an alphabetic character from the list in the browse item (artist, album, etc.) currently selected.
1Enter Music search mode
Press the [] button twice.
“MUSICSEARCH” is displayed.
2Select Alphabet search mode
Turn the Control knob to select “Alphabet Search”, and then press the Control knob.
3Search for character
|
Operation type |
|
|
Operation |
|
Select the characters |
|
|
Turn the Control knob. |
|
Determine the characters. |
|
Press the Control knob. |
|
|
Return to the Music search mode. |
|||
Cancelling the Alphabet search mode |
||||
Press the |
] button for at least 1 second. |
⁄
•The time of Alphabet search may become long depending on the number of items (songs) in iPod.
•To search for a character other than A to Z and 1, enter “*”.
•If the first character string begins with an article “a”, “an”, or “the” in the alphabet search mode, it is searched for in defiance of the article.
English | 9
iPod control operation
Browsing for music of the same artist or genre as the one being played.
1Enter Search select mode
Press the [] button for at least 1 second.
2Select Related search mode
Turn the Control knob to select “Related Search”, and then press the Control knob.
3Select desired browsing item
Turn the Control knob to select browse item, and then press the Control knob.
|
Display |
|
Browses music |
|
||
|
“Search Artist” |
|
Displays the album of the same artist. |
|||
|
“Search Album” |
|
Displays music in the album in which the one |
|||
|
|
|
being played is included. |
|||
|
“Search Genre” |
|
Displays the artist of the same genre. |
|||
|
“Search Composer” |
|
Displays the album including music created by the |
|||
|
|
|
same composer. |
|
||
4 Search for music |
|
|
|
|||
|
Operation type |
|
|
|
Operation |
|
|
Movement between items |
|
Turn the Control knob. |
|||
|
Selection of item |
|
|
|
Press the Control knob. |
|
|
Return to previous item |
|
Press the |
] button. |
||
Cancelling the Related search mode |
||||||
Press the |
] button for at least 1 second. |
⁄
•Related search cannot be performed while playing a Podcast.
•When the music being played has no information on browsing items or no music was found, “Not Found” is displayed.
Searching for music by selecting a browse item and an alphabetic character(s).
1Enter Search select mode
Press the [] button for at least 1 second.
2Select Direct search mode
Turn the Control knob to select “Direct Search”, and then press the Control knob.
3Select browse item
Turn the Control knob to select browse item, and then press the Control knob.
Display |
|
Browses item |
“PLAYLISTS” |
|
Playlists |
|
|
|
“ARTISTS” |
|
Artists |
|
|
|
“ALBUMS” |
|
Albums |
|
|
|
“SONGS” |
|
Songs |
|
|
|
“PODCASTS” |
|
Podcasts |
|
|
|
“GENRES” |
|
Genres |
|
|
|
“COMPOSERS” |
|
Composers |
|
|
|
4Select the character to be searched for
Turn the Control knob to select character, and then press the Control knob.
You can select up to three characters.
5Search for music
Turn the Control knob to select “DONE”, and then press the Control knob.
A search result list is displayed.
6Select the music
Turn the Control knob to select music, and then press the Control knob.
Cancelling the Direct search mode
Press the ] button for at least 1 second.
10 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected.
1Enter Music search mode
Press the [] button.
“MUSICSEARCH” is displayed.
2Enter Search select mode
Press the [] button.
3Select Skip search mode
Turn the Control knob to select “Skip Search”, and then press the Control knob.
4Search for music
|
Operation type |
|
|
Operation |
|
Movement between items Turn the Control knob. |
|||
|
Skip Search |
|
|
Push the Control knob towards up or down. |
|
Selection of item |
|
|
Press the Control knob. |
|
Sets the ratio of skip |
|
|
Push the Control knob towards right or left. |
|
performed |
|
|
|
Cancelling the Music search mode |
||||
Press the |
] button for at least 1 second. |
⁄
•The ratio of the Skip Search is set to 0.5% as default. Refer to <Skip search ratio setting> (page 11).
•Keep pushing Control knob for 3 seconds or longer skips songs at 10% regardless of the setting.
Sets the ratio of skip performed with <Skip search> (page 11).
1Select iPod source
Press the [SRC] button.
Select the “iPod” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Skip search
The item can be selected and determined as follows.
“Settings” > “Skip Search”
To select the item, turn the Control knob. To determine the item, press the Control knob.
4Set the Skip search ratio
Turn the Control knob to select ratio (“0.5%”, “1%”, “5%”, or “10%”), and then press the Control knob.
5Exit Function setting mode
Press the [] button for at least 1 second.
English | 11
iPod control operation
You can select a Play Mode, such as Random play and Repeat play.
1Select iPod source
Press the [SRC] button.
Select the “iPod” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Play mode
Turn the Control knob to select “Play Mode”, and then press the Control knob.
4Select the desired Play function
Turn the Control knob to select Play function, and then press the Control knob.
Display |
Overview |
|
||
“Play Mode” |
|
|
|
|
|
“iPod by Hand” |
When set to “ON”, allows you to operate iPod |
||
|
|
with the control on the iPod. |
|
|
|
|
“ON” / “OFF” |
|
|
|
“Folder Random” |
When set to “ON”, plays the music in the folder |
||
|
|
randomly. (Music only) |
|
|
|
|
“ON” / “OFF” |
|
|
|
“All Random” |
When set to “ON”, plays all songs in iPod |
||
|
|
randomly. (Music only) |
|
|
|
|
“ON” / “OFF” |
|
|
|
“File Repeat” |
When set to “ON”, plays the music repeatedly. |
||
|
|
“ON” / “OFF” |
|
|
|
|
( |
|
: Factory setting) |
5Set the Play function
Press the Control knob.
The previous item is displayed.
6Exit Function setting mode
Press the [ ] button for at least 1 second.
You can register your favorite songs to make a playlist. You can register up to ten songs in the playlist.
1Play the song you want to register
Push the Control knob towards up, down, right, and left.
2Enter Search select mode
Press the [] button for at least 1 second.
3Register the song
Turn the Control knob to select “Register My Playlist”, and then press the Control knob.
“## (registration number) Stored” is displayed. You can register up to ten songs.
In Music search mode
4Enter Music search mode
Press the [] button.
“MUSICSEARCH” is displayed.
5Play the song you want to register
Refer to <Music search> (page 9).
6Enter Register playlist mode
Press the [] button.
7Register the song
Turn the Control knob to select “Register My Playlist”, and then press the Control knob.
“## (registration number) Stored” is displayed. You can register up to ten songs.
⁄
•When creating a playlist, you can register the songs stored in one iPod. If you attempt to register a song by connecting an unregistered iPod, “My Playlist Delete” is displayed. Selecting “YES” deletes the playlist.
•If you attempt to register the eleventh song, “Memory Full” is displayed and you cannot register the song. To register it, delete an unnecessary song.
•Do not register Podcasts. Songs may be registered or played improperly. For example, unintended songs are registered.
12 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
1Enter Search select mode
Press the [] button for at least 1 second.
2Select Recall playlist mode
Turn the Control knob to select “Recall My Playlist”, and then press the Control knob.
3Play a song in the playlist
Turn the Control knob to select the song you want to play, and then press the Control knob.
⁄
•To stop playing the song in the playlist, turn the power off.
•If a song does not end with 1 second or longer silence, its last portion may not be played.
•Songs cannot be played at random during playback of the songs in playlist.
1Enter Search select mode
Press the [] button for at least 1 second.
2Select Delete playlist mode
Turn the Control knob to select “Delete My Playlist”, and then press the Control knob.
3Select how to delete song(s)
Turn the Control knob to select “Delete One” or “Delete All”, and then press the Control knob.
Selecting “Delete All” deletes all songs.
Selecting “Delete All” moves to step 5 and all songs are deleted.
4Select the song to delete
Turn the Control knob to select the song, and then press the Control knob.
5Turn the Control knob to select “YES”, and then press the Control knob.
“Completed” is displayed.
In Function setting mode
1Select iPod source
Press the [SRC] button.
Select the “iPod” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Playlist delete mode
The item can be selected and determined as follows.
“Settings” > “My Playlist Delete” > “Delete One” or “Delete All”
To select the item, turn the Control knob. To determine the item, press the Control knob.
Selecting “Delete All” deletes all songs.
Selecting “Delete All” moves to step 5 and all songs are deleted.
4Select the song to delete
Turn the Control knob to select the song, and then press the Control knob.
5Turn the Control knob to select “YES”, and then press the Control knob.
“Completed” is displayed.
6Exit Function setting mode
Press the [] button for at least 1 second.
English | 13
For basic operation to playback Music disc/Audio file contents, refer to the Quick Start Guide.
Selecting the music you want to listen to from the device or media being played now.
1Enter Music search mode
Press the [] button.
“MUSICSEARCH” is displayed.
2Search for music
Audio file
Operation type
Movement between folders/files
Selection of folder/flie
Return to previous folder
Return to root folder
Cancel the Music Search mode
Operation
Turn the Control knob.
Press the Control knob.
Press the ] button.
Push the Control knob towards left for at least 1 second.
Press the ] button for at least 1 second.
¡ indicator: Audio file ] indicator: Folder
CD source
Operation type
Movement between track Selection of track
Return to first track
Cancel the Music Search mode
Operation
Turn the Control knob.
Press the Control knob.
Push the Control knob towards left for at least 1 second.
Press the ] button.
Music Editor media
The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected.
1Enter Music search mode
Press the [] button.
“MUSICSEARCH” is displayed.
2Enter Search select mode
Press the [] button.
3Select Skip search mode
Turn the Control knob to select “Skip Search”, and then press the Control knob.
4Search for music
|
Operation type |
|
|
Operation |
|
Movement between items Turn the Control knob. |
|||
|
Skip Search |
|
|
Push the Control knob towards up or down. |
|
Selection of item |
|
|
Press the Control knob. |
|
Sets the ratio of skip |
|
|
Push the Control knob towards right or left. |
|
performed |
|
|
|
Cancelling the Music search mode |
||||
Press the |
] button for at least 1 second. |
⁄
•The ratio of the Skip Search is set to 0.5% as default. Refer to <Skip search ratio setting> (page 11).
•Keep pushing Control knob for 3 seconds or longer skips songs at 10% regardless of the setting.
14 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
You can select a Play Mode, such as Random play and Repeat play.
1Select CD/ USB source
Press the [SRC] button.
Select the “CD” or “USB” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Play function mode
Turn the Control knob to select “Play Mode”, and then press the Control knob.
4Select the desired Play function
Turn the Control knob to select Play function, and then press the Control knob.
Display |
Overview |
|
|||
“Play Mode” |
|
|
|
|
|
|
“Track Scan” (CD)/ |
When set to “ON”, plays the intro of the music |
|||
|
“File Scan” (Audio |
in the disc/folder successively. |
|||
|
file) |
“ON” / “OFF” |
|
||
|
“Disc Random” (CD)/ |
When set to “ON”, plays the music in the folder |
|||
|
“Folder Random” |
randomly. |
|
||
|
(Audio file) |
“ON” / “OFF” |
|
||
|
“All Random” |
When set to “ON”, plays all songs in CD/USB |
|||
|
|
randomly. (Audio file only) |
|
||
|
|
“ON” / “OFF” |
|
||
|
“Track Repeat” (CD)/ |
When set to “ON”, plays the music repeatedly. |
|||
|
“File Repeat” (Audio |
“ON” / “OFF” |
|
||
|
file) |
|
|
|
|
|
“Disc Repeat” (CD |
When set to “ON”, plays the music in the disc/ |
|||
|
changer)/ “Folder |
folder repeatedly. |
|
||
|
Repeat” (Audio file) |
“ON” / “OFF” |
|
||
|
“MGZN Random” |
When set to “ON”, plays the music in the disc |
|||
|
|
changer randomly. (Disc changer only) |
|||
|
|
“ON” / “OFF” |
|
||
|
|
( |
|
|
: Factory setting) |
5Set the Play function
Press the Control knob.
The previous item is displayed.
6Exit Function setting mode
Press the [ ] button for at least 1 second.
Function of remote control
Searching the music by entering the track number.
1Enter Direct Music search mode
Press the [DIRECT] button on the remote control.
“– –” is displayed.
2Enter the music number
Press the number buttons on the remote control.
3Search the music
Press the [4] or [¢] button on the remote control.
Cancelling Direct music search
Press the [] button on the remote control.
English | 15
Music disc/Audio file Operation
Function of disc changers
Selecting CD changer source
Press the [SRC] button.
Select the “CD CH” display.
Music search
Push the Control knob towards right or left.
Disc search
Push the Control knob towards up or down.
Function of disc changers with remote control
Searching the disc or music by entering the disc or music number.
1Enter Direct search mode
Press the [DIRECT] button on the remote control.
“– –” is displayed.
2Enter the disc or music number
Press the number buttons on the remote control.
3Search the disc
Press the [FM] or [AM] button on the remote control.
4Search the music
Press the [4] or [¢] button on the remote control.
Cancelling Direct search
Press the [] button on the remote control.
⁄
• Input “0” to select disc 10.
16 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
English | 17
For basic operation to listen to the radio, refer to the Quick Start Guide.
Memorizes 18 (FM)/ 6 (AM) stations with good reception automatically.
1Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Auto memory mode
The item can be selected and determined as follows.
“Settings” > “Auto Memory”
To select the item, turn the Control knob. To determine the item, press the Control knob.
4Start Auto memory mode
Turn the Control knob to select “YES”, and then press the Control knob.
When 18 (FM)/ 6 (AM) stations that can be received are put in the memory, auto memory entry closes.
Selects the tuning mode of the radio.
1Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Seek mode
The item can be selected and determined as follows.
“Settings” > “Seek Mode”
To select the item, turn the Control knob. To determine the item, press the Control knob.
4Set to the desired Seek mode
Tuning mode |
|
Display |
|
Operation |
Auto seek |
|
“Auto1” |
|
Automatic search for a station. |
Preset station seek |
|
“Auto2” |
|
Search in order of the stations in the |
|
|
|
|
Preset memory. |
Manual |
|
“Manual” |
|
Normal manual tuning control. |
Turn the Control knob to select Seek mode, and then press the Control knob.
5 Exit Function setting mode
Press the ] button for at least 1 second.
18 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
Sets the tuner items.
1Select Tuner source
Press the [SRC] button.
Select the “TUNER” display.
2Enter Function setting mode
Press the Control knob for at least 1 second.
3Select the Setting mode
Turn the Control knob to select “Settings”, and then press the Control knob.
4Select the desired Tuner setting item
Turn the Control knob to select Tuner setting item, and then press the Control knob.
Display |
Overview |
|
|
|
“Settings” |
|
|
|
|
|
“MONO” |
You can reduce the noise when stereo |
||
|
|
broadcasts are received as monaural. |
||
|
|
“ON” / “OFF” |
|
|
|
“TI” |
Switches to the traffic information |
||
|
|
automatically when the traffic bulletin starts |
||
|
|
“ON” / “OFF” |
|
|
|
|
( |
|
: Factory setting) |
5Set the Tuner setting item
Turn the Control knob to select desired value, and then press the Control knob.
The previous item is displayed.
6Exit Function setting mode
Press the [ ] button for at least 1 second.
Function of remote control
Entering the frequency and tuning.
1Enter Direct access tuning mode
Press the [DIRECT] button on the remote control.
“– – – –” is displayed.
2Enter the frequency
Press the number buttons on the remote control.
Example:
Desired frequency |
|
Press button |
92.1 MHz (FM) |
|
[9], [2], [1] |
810 kHz (AM) |
[8], [1], [0] |
3Search the frequency
Press the [4] or [¢] button on the remote control.
Cancelling Direct access tuning
Press the ] button on the remote control.
English | 19
Tuner Operation
Selecting the Program Type below and searching for a station;
Program Type |
Display |
Speech |
“Speech” |
Music |
“Music” |
News |
“News” |
Information |
“Inform” |
Sports |
“Sports” |
Talk |
“Talk” |
Rock |
“Rock” |
Classic Rock |
“Cls Rock” |
Adult Hits |
“Adlt Hit” |
Soft Rock |
“Soft Rck” |
Top 40 |
“Top 40” |
Country |
“Country” |
Oldies |
“Oldies” |
Program Type |
Display |
Soft |
“Soft” |
Nostalgia |
“Nostalga” |
Jazz |
“Jazz” |
Classical |
“Classicl” |
R & B |
“R & B” |
Soft R & B |
“Soft R&B ” |
Language |
“Language” |
Religious Music |
“Rel Musc” |
Religious Talk |
“Rel Talk” |
Personality |
“Persnlty” |
Public |
“Public” |
College |
“College” |
Weather |
“Weather” |
•Speech and Music include the Program type shown below.
Speech: Items in the white letters. Music: Items in the black letters.
1Enter PTY mode
Press the [] button twice.
2Select the Program Type
Turn the Control knob.
3Search for the selected Program Type station
Push the Control knob towards right or left.
4Exit PTY mode
Press the [] button.
⁄
•This function cannot be used during a traffic bulletin or AM reception.
•When the selected Program Type is not found, “No PTY” is displayed. Select another Program Type.
Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1Select the Program Type to preset
Refer to <PTY (Program Type)> (page 20).
2Enter Program Type preset mode
Press the [PRESET] button.
3Select a number and store it in the memory
Turn the Control knob to select memory number (“1” – “6”), and then press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [] button.
Recalling the preset Program Type
1Enter PTY mode
Press the [] button twice.
2Enter Preset memory mode
Press the [PRESET] button.
3Select the number you want to recall from the memory
Turn the Control knob to select recall number (“1” – “6”), and then press the Control knob.
20 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U
English | 21
This unit automatically memorizes the previously used functions and Function setting items, which can easily be recalled.
1Display the Log memory list
Press the [LOG] button.
2Recall the desired function
Turn the Control knob to select function, and then press the Control knob.
Category display |
|
Function category |
“FM” |
|
FM broadcast |
“AM” |
|
AM broadcast |
“iPod” |
|
iPod music |
“USB” |
|
USB music |
“CD” |
|
CD music |
“PLAY” |
|
Play mode item |
“INIT” |
|
Initial setting item |
“SET” |
|
Setting item |
“DISP” |
|
Display setting item |
“AUD” |
|
Audio control setting |
“BT” |
|
Calling number |
“SR” |
|
Sirius channel |
“XM” |
|
XM channel |
Cancelling the Log memory recall
Press the ] button.
⁄
•Maximum of 15 recently used functions are logged. When this limit is reached, they are deleted from the oldest.
•Logged functions can be deleted. Refer to <Deleting a Log memory item> (page 23).
•Functions to be logged can be set by categories. Refer to <Log memory category setting> (page 23).
•Logged functions can be locked to avoid them being deleted. Refer to <Log memory item lock> (page 22).
•Stations are logged after 2 minutes of reception.
This timing can be changed. Refer to <Tuner Log memory time setting> (page 24).
Locks Log memory items to avoid them being deleted.
1Display the Log memory list
Press the [LOG] button.
2Lock the Log memory item
Turn the Control knob to select item, and then press the Control knob for at least 1 second.
Locked items are indicated with “ ”.
3Exit Log memory
Press the [] button.
22 | KDC-X895/ KDC-BT848U/ KDC-X595/ KDC-448U