CD-RECEIVER
KDC-X993 KDC-HD942U KDC-X693 KDC-MP642U
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© B64-4416-00/00 (KW)
Contents
Before use |
3 |
Basic Operation |
4 |
Hands-free phoning |
|
Function Control |
6 |
Display Settings |
10 |
Display Type Selection |
|
Text Display Selection |
|
Illumination Color Selection |
|
Auxiliary Input Display Setting |
|
Music disc/Audio file Operation |
13 |
Music Search |
|
Music Search for iPod |
|
Searching for Music by Initial |
|
All Random |
|
iPod Control by Hand Mode |
|
Direct Music Search |
|
Direct Disc Search |
|
Basic Operation of Disc Changer (Optional) |
|
Tuner Operation |
16 |
Auto Memory Entry |
|
Station Preset Memory |
|
Preset Tuning |
|
Direct Access Tuning |
|
PTY (Program Type) |
|
Program Type Preset |
|
Registration of a Station as a PTY |
|
HD Radio tuner control |
18 |
Auto Memory Entry |
|
Station Preset Memory |
|
Preset Tuning |
|
Direct Access Tuning |
|
HD Radio Tagging (iTunes Tagging) |
|
Operation of hands-free phoning |
20 |
Before Use |
|
Receiving a call |
|
During a call |
|
Call waiting |
|
Other functions |
|
Making a call |
|
Dial a number |
|
Speed dialing (Preset dial) |
|
Calling a number in the Phone Book |
|
Calling a number in the call log |
|
Make a voice dialing call |
|
Registering to the Preset Dial Number List |
|
Display of phone number type (category) |
|
Bluetooth Audio Operation |
24 |
Before Use |
|
Basic Operation |
|
Other Functions |
25 |
Activating Security Code
Deactivating Security Code
Manual Clock Adjustment
Date Adjustment
Date Format Selection
AMP Control
Demonstration mode setting
Theft Deterrent Faceplate
Audio Adjustments |
28 |
Audio Control |
|
Audio Setup |
|
Sound Setup |
29 |
Cabin selection |
|
Speaker setting |
|
DTA (Digital Time Alignment) setting |
|
X’Over setting |
|
Preset Equalizer curve select |
|
Manual Equalizer Control |
|
Preset position selection |
|
Manual position setting |
|
Audio Preset Memory |
|
Audio Preset Recall |
|
Favorite Control |
34 |
Favorite Preset Memory |
|
Favorite Preset Recall |
|
Favorite Preset Memory Delete |
|
Favorite Name Setting |
|
Bluetooth Setup |
36 |
Registering Bluetooth device Registering Special Bluetooth device Registering PIN Code
Downloading the Phone Book
Selecting the Bluetooth device You Wish to Connect Deleting a Registered Bluetooth device
Displaying the Firmware Version Adding a voice dialing command Setting a Voice Command for Category SMS (Short Message Service) Downloading the SMS
Satellite Radio tuner (Optional Accessory)
control |
41 |
Basic Operation |
|
Category and Channel Search |
|
Preset Memory |
|
Preset Tuning |
|
Channel Scan |
|
Direct Access Tuning |
|
Basic Operations of remote control |
43 |
Appendix |
45 |
Accessories/ Installation Procedure |
50 |
Connecting Wires to Terminals |
51 |
Installation/Removing the Unit |
52 |
Troubleshooting Guide |
54 |
Specifications |
57 |
2 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Before use
2WARNING
To prevent injury or fire, take the following precautions:
•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
Do not use this unit before canceling Demonstration mode!
This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the <Demonstration mode setting> (page 27).
How to reset your unit
•If this unit or the connected unit (disc auto changer, etc.) fails to operate properly, press the Reset button. The unit returns to factory settings when the Reset button is pressed.
Reset button
Cleaning the Unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth.
If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
¤
•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters.
Cleaning the Faceplate Terminals
If the terminals on the unit or faceplate get dirty, wipe them with a clean soft dry cloth.
Lens Fogging
When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condensation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
•If you experience problems during installation, consult your Kenwood dealer.
•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.
•Characters that conform to ISO 8859-1 can be displayed.
•The RDS feature won’t work where the service is not supported by any broadcasting station.
•In this document, the description indicator will light means a status is displayed. Refer to <Display Type Selection> (page 10) for the details of the status display.
•The illustrations of the display and the panel appearing in this manual are examples used to explain more clearly how the controls are used. Therefore, what appears on the display in the illustrations may differ from what appears on the display on the actual equipment, and some of the illustrations on the display may be inapplicable.
Handling CDs
•Do not touch the recording surface of the CD.
•Do not stick tape etc. on the CD, or use a CD with tape stuck on it.
•Do not use disc type accessories.
•Clean from the center of the disc and move outward.
•When removing CDs from this unit, pull them out horizontally.
•If the CD center hole or outside rim has burrs, use the CD only after removing the burrs with a ballpoint pen etc.
CDs that cannot be used
• CDs that are not round cannot be used.
• CDs with coloring on the recording surface or CDs that are dirty cannot be used.
• This unit can only play the CDs with
. This unit may not correctly play discs which do not
have the mark.
•You cannot play a CD-R or CD-RW that has not been finalized. (For the finalization process refer to your CD-R/CD-RW writing software, and your CD-R/CD- RW recorder instruction manual.)
English | 3
Basic Operation
Release |
[ ] |
[SRC] |
Microphone |
AUX
Auxiliary |
[ ] [AUD] |
input |
[AUTO] |
|
|
General functions
Power/Source Select button: [SRC]
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then turn the Control knob or push it toward up or down. To determine the selected source, press the Control knob.
SRC Select mode 2: Pressing this button each time switches between sources.
Tuner (“TUNER” or “HD Radio”) , USB or iPod (“USB” or “iPod”), CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”)
Press at least 1 second to turn off the power.
⁄
•The SRC Select mode can be set in “MENU” > “SRC Select” of <Function Control> (page 6).
•Auxiliary input source is initially set to “OFF”. Set “Built in
AUX” described in <Function Control> (page 6) to “ON”. : Select “MENU” > “Built in AUX”
•When an optional accessory is connected, the source name for each device appears.
•When connection of the iPod is recognized, the source display changes from “USB” to “iPod”.
•USB (iPod) source is recognized as CD source on the connected unit.
Volume control: [AUD] knob
Turn the knob to adjust the volume.
Subwoofer output: Control knob
Switches between ON (“SUBWOOFER ON”) and OFF (“SUBWOOFER OFF”) each time pushing toward down for at least 2 seconds.
[FNC] Control USB Terminal
knob
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
•Use the mini-plug cable which is stereo type and does not have any resistance.
•The auxiliary input requires the setting made in “MENU” > “AUX” of <Function Control> (page 6).
Text/Title scroll: Control knob
Scrolls the CD and audio file text display when pushing toward up for at least 2 seconds.
Muting volume upon reception of phone call
When there is a call, “CALL” is displayed and the audio system is paused.
When the call ends, “CALL” disappears and the audio system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
⁄
•To use the TEL Mute feature, you need to hook up the MUTE wire to your telephone using a commercial telephone accessory. Refer to <Connecting Wires to Terminals> (page 51).
Function Control: [FNC]
Pressing this button allows you to set various functions using the Control knob. Refer to <Function Control> (page 6).
Category |
|
Function of setup item |
MENU |
|
Allows you to set up the environment. |
SETUP |
|
Allows you to set up the display and color. |
SOUND |
|
Allows you to set up the sound environment. |
BT |
|
Allows you to set up the Bluetooth function. |
—Allows you to set up the each source function.
4 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Favorite Control: Control knob
You can recall the various registered functions by turning the Control knob.
For example, you can recall and playback the playlist in iPod while listening to Tuner.
Refer to <Favorite Control> (page 34).
Tuner functions
FM band: Control knob
Switches between FM1, FM2, and FM3 each time pushing toward up.
AM band: Control knob
Switches to AM when pushing toward down.
Tuning: Control knob
Changes the frequency when pushing toward left or
right.
⁄
• During reception of stereo stations the “ST” indicator is ON.
Tuning mode select: [AUTO]
•For KDC-HD942U/ KDC-X693/ KDC-MP642U: Switches as follows each time this button is pressed.
•For KDC-X993: Switches as follows each time this button is pressed for at least 1 second.
Tuning mode |
Display |
Operation |
Auto seek |
“Seek Mode : Auto1” |
Automatic search for a station. |
Preset station |
“Seek Mode : Auto2” |
Search in order of the stations in |
seek |
|
the Preset memory. |
Manual |
“Seek Mode : Manual” |
Normal manual tuning control. |
Disc & Audio file play functions
Drop open the faceplate: Release
ڥ Push the faceplate on the left side, and return it to its former position.
Disc play: Disc slot
Starts playing when a disc is inserted.
When a CD is inserted, the “CD-IN” indicator is ON.
ڥ 3 inch CD cannot be used. Attempt to insert using an adapter can cause malfunction.
Disc ejection: [0]
⁄
•You can eject the disc for 10 minutes after switching off the engine.
USB device/iPod play: USB Terminal
Connecting a USB device starts playback.
⁄
•For the playable audio file, media, and devices, refer to <About Audio file> (page 45).
Pause and play: Control knob
Switches between pause and play each time this button is pressed.
USB device removing: [0]
Press this button for 2 seconds or longer to select the remove mode, and the remove the USB device. During the remove mode, “USB REMOVE” is displayed.
Music search: Control knob
Changes the music when pushing toward left or right. Fast reverses or forwards the music while keeping pushing toward left or right. (No sound is output while playing audio file.)
Folder search: Control knob
Changes the folder containing the audio file when pushing toward up or down.
•For the operation on iPod, enter <Music Search for iPod> (page 13) is first to enter the search mode.
Search mode: [
]
After pressing [ 
] button, you can quickly search songs with the Control knob. See <Music Search> (page 13) for details.
Hands-free phoning
Microphone:
(Accessory of KDC-X993)
The microphone for the hands free phone is supplied. When your voice cannot be recognized due to the low microphone volume or noises in the vehicle, adjust the microphone settings by selecting “MENU”
>“Mic Gain” of <Function Control> and “MENU” >“NR Level” of <Function Control> (page 6).
English | 5
Function Control
Functions in the table below can be set up by using Function Control.
1Enter Function Control mode
Press the [FNC] button.
2Select a Function group.
Push the Control knob towards right or left.
Pushing the Control knob towards left allows you to set the preference items (“MENU”, “SETUP”, or “SOUND”).
Pushing the Control knob towards right allows you to set the currently selected source function item ON/OFF.
3 Select your desired setup item
Operation type |
|
Operation |
Movement between items |
|
Turn the Control knob. |
Selection of item |
|
Press the Control knob. |
Return to previous item |
|
Press the [FNC] button. |
|
|
Select“Return” at the bottom of the item list. |
Repeat selection and determination until your desired setup item is selected.
Example:
|
MENU |
□ TRACK SCAN |
|
|
SETUP |
□ DISC RANDOM |
|
||
|
SOUND |
□ TRACK REPEAT |
|
|
|
|
|
|
|
|
MENU |
□ TRACK SCAN |
|
|
SETUP |
□ DISC RANDOM |
|
||
|
SOUND |
□ TRACK REPEAT |
|
|
MENU Scroll Auto
CD Read 1
DEMO Mode OFF
Display OFF
ILM MSC SYNC OFF
In this manual, the above selection is indicated as
Select “MENU” > “DEMO Mode”.
Each item’s ”&” will be ” ” when the source function is set to ON.
4Make a setting
Push the Control knob towards up or down.
Press the Control knob to set the source function item ON/OFF.
•Some items require you to keep pressing the Control knob for 1 or 2 seconds so that you can make a setting. For these items, the time during which you need to keep pressing the Control knob is displayed in the Entry column in seconds.
•For the functions accompanied by the description of the setting procedure and so forth, the reference page numbers are displayed.
5Exit Function Control mode
Press the [FNC] button for at least 1 second.
Displayed item is depending on currently selected source or mode. The mark in Condition column shows the condition to which the item is displayed.
: Can be set in other than standby state.
: Can be set in standby state.
: Can be set while Audio file source of CD/USB/iPod.
: Can be set while Audio file source of CD/USB (excluding iPod).
: Can be set while CD/ Disc changer source.
: Can be set while CD source.
: Can be set while Disc changer source.
: Can be set during Tuner source.
: Can be set during FM reception.
: Can be set while accessing AUX source.
: Can be set while HD Radio source.
: Can be set during Satellite radio source.
: Can be set only during playback of the iPod source.
: Can be set for sources other than the standby source by setting “2 ZONE” of <Audio Setup> (page 28) to “ON”.
: Can be set while a cell-phone is connected.
: Sets “ILM MSC SYNC” in the menu to “OFF”.
: Refer to the reference page.
— : Can be set during all sources.
The Control knob is used for entry, but how to use the knob varies depending on the setting items.
: Press the Control knob to switch the settings.
: Push the Control knob towards left or right to switch the settings.
: Turn the Control knob to switch the settings.
1 sec. : Press the Control knob for 1 second to enter into the setting mode.
2 sec. : Press the Control knob for 2 seconds to enter into the setting mode.
⁄
•Refer to the respective page for information on how to set the items with reference page number.
•Only the items available to the current source are displayed.
•The “SOUND” setting cannot be performed while the Dual Zone function is used.
*Factory setting
* Function of KDC-X993.
* Function of KDC-X693.
* Function of KDC-X693 with KCA-BT200. * Function of KDC-MP642U.
* Refer to <Menu Glossary> (page 48).
6 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Source function item
Function |
|
Setting |
|
Entry |
|
Setting overview |
|
Condition Page |
||
“iPod BY HAND” |
|
“ON”/“OFF”* |
|
|
|
When set to “ON”, allows you to operate iPod with the |
|
|
|
14 |
|
|
|
|
|
|
control on the iPod. |
|
|
|
|
“FILE SCAN” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the intro of the music in the |
|
|
|
— |
|
|
|
|
|
|
|
folder successively. |
|
|
|
|
“FOLDER RDM” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music in the folder |
|
|
|
— |
|
|
|
|
|
|
|
randomly. |
|
|
|
|
“ALL RANDOM” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, all songs in iPod are played at |
14 |
||||
|
|
|
|
|
|
random. |
|
|
|
|
“FILE REPEAT” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music repeatedly. |
|
|
|
— |
|
|
|
|
|
|
|
|
|
|
|
|
“FOLDER REP” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music in the folder |
|
|
|
— |
|
|
|
|
|
|
|
repeatedly. |
|
|
|
|
“TRACK SCAN” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the intro of the music on the |
|
|
|
— |
|
|
|
|
|
|
|
disc successively. |
|
|
|
|
“DISC RANDOM” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music on the disc randomly. |
|
|
|
— |
|
|
|
|
|
|
|
|
|
|
|
|
“MAGAZINE RDM” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music in the disc changer |
|
|
|
— |
|
|
|
|
|
|
|
randomly. |
|
|
|
|
“TRACK REPEAT” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music repeatedly. |
|
|
|
— |
|
|
|
|
|
|
|
|
|
|
|
|
“DISC REPEAT” |
|
“ON”/“OFF”* |
|
|
When set to “ON”, plays the music on the disc |
|
|
|
— |
|
|
|
|
|
|
|
repeatedly. |
|
|
|
|
“PTY SEARCH” |
|
|
|
|
|
Select the Program Type and search for a station. |
17 |
|||
|
|
|
|
|
|
|
|
|
|
|
“AUTO MEMORY” |
|
|
|
|
|
Memorizes 6 stations with good reception |
16 |
|||
|
|
|
|
|
|
automatically. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Channel Scan” |
|
|
|
|
|
Every receivable Channel is checked for 10 seconds. |
42 |
|||
|
|
|
|
|
|
|
|
|
|
|
Preference item
Category |
Item |
|
Setting |
|
Entry |
||||
“MENU” |
“Security Set”/ |
|
— |
|
1 sec. |
||||
|
“Security Clear” |
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
“SRC Select” |
|
“1”*/“2” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
“Skip Search” |
|
“0.5%”*/ |
|
|
|
|
|
|
|
|
|
“1%”/“5%”/ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“10%” |
|
|
|
|
|
|
|
“Device Regist”* |
|
— |
|
1 sec. |
||||
|
|
|
|
|
|
|
|
|
|
|
“SPCL DVC Select”* |
|
— |
|
1 sec. |
||||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
“Phone Selection”* |
|
— |
|
1 sec. |
||||
|
|
|
|
|
|
|
|
|
|
|
“Audio Selection”* |
|
— |
|
1 sec. |
||||
|
“Device Delete”* |
|
— |
|
1 sec. |
||||
|
|
|
|
|
|
|
|
|
|
|
“BT DVC Status”* |
|
— |
|
1 sec. |
||||
|
“PIN Code Edit”* |
|
— |
|
1 sec. |
||||
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
“Auto Answer”* |
|
“OFF”/“0S” – |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
“8S”* –“99S” |
|
|
|
|
|
|
|
“Mic Gain”* |
|
“–2” –“0”* – |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
“+2” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“NR Level”* |
|
“–2” –“0”* – |
|
|
|
|
|
|
|
|
|
“+2” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setting overview |
|
Condition |
|
Page |
Sets/Resets security code. |
|
|
25 |
|
|
|
|
|
|
Sets the source selection method. |
|
|
4 |
|
|
|
|
|
|
Sets the ratio of skip performed with <Music Search |
|
|
13 |
|
for iPod>. |
|
|
|
|
|
|
|
|
|
Register a Bluetooth device (pairing). |
|
|
36 |
|
|
|
|
|
|
Allow registration of a special device that cannot be |
|
|
36 |
|
registered normally. |
|
|
|
|
Select a cell-phone subject to hands-free connection. |
|
|
37 |
|
|
|
|
|
|
Select the Bluetooth audio player to be connected. |
|
— |
|
37 |
Cancel registration of the Bluetooth device. |
|
|
38 |
|
|
|
|
|
|
Display the status of the Bluetooth device. |
|
— |
|
* |
Specify the PIN code required when registering this unit |
|
|
36 |
|
using the Bluetooth device. |
|
|
|
|
Answer a call automatically after lapse of the preset |
|
|
|
* |
time interval for automatic answer. |
|
|
|
|
Adjusts the sensitivity of the built-in microphone for a |
|
— |
|
* |
telephone call. |
|
|
|
|
Reduces the noises generated by the surrounding |
|
— |
|
* |
environment without changing the microphone |
|
|
|
|
volume. |
|
|
|
|
Next page 3
English | 7
Function Control
Category |
Item |
Setting |
Entry |
|
“SP Select”* |
“Front”*/ |
|
|
|
“F-R”/“F-L” |
|
|
“Call Beep”* |
“ON”*/“OFF” |
|
|
“BT F/W Update”* |
— |
1 sec. |
|
“Beep” |
“OFF”/“ON”* |
|
|
“Clock Adjust” |
— |
1 sec. |
|
“Date Adjust” |
— |
1 sec. |
|
“Date Mode” |
7 types |
1 sec. |
|
“SYNC” |
“OFF”*/“ON” |
|
|
“DSI” |
“OFF”/“ON”* |
|
|
“Illumi DIM” |
“OFF”/“AUTO”* |
|
|
|
/“MNAL1” / |
|
|
|
“MNAL2” |
|
|
“ILM Effect”* * |
“OFF”/“ON”* |
|
|
“ILM MSC SYNC” |
“OFF”*/“ON” |
|
|
“Display” |
“OFF”/“ON”* |
|
|
“DISP DIM“ |
“OFF”/“AUTO”* |
|
|
|
/“MNAL1” / |
|
|
|
“MNAL2” |
|
|
“Contrast” |
“1” -“10” |
|
|
“DISP N/P” |
“POSI1”/“2” |
|
|
|
/“NEGA1”/“2” |
|
|
“AMP” |
“OFF”/“ON”* |
|
|
“Zone2” |
“REAR”*/ |
|
|
|
“FRONT” |
|
|
“AMS Control”* * |
— |
|
|
“TI”* * |
“OFF”*/“ON” |
|
|
“CRSC”* * * |
“OFF”/“ON”* |
|
|
“Receive Mode” |
“AUTO”*/ |
|
|
|
“DIGITAL”/ |
1 sec. |
|
|
“ANALOG” |
|
|
“Tag Memory” |
“00”-“50” |
|
|
“Tagging” |
“0FF”/“ON”* |
|
|
“ESN=” |
— |
|
|
“Name Set” |
— |
1 sec. |
|
“Scroll” |
“Auto”*/ |
|
|
|
“Manual” |
|
|
“Favorite Delete” |
— |
1 sec. |
|
“Built in AUX” |
“OFF”*/“ON” |
|
|
“CD Read” |
“1”*/“2” |
|
|
“DEMO Mode” |
“OFF”/“ON”* |
2 sec. |
Setting overview |
|
Condition |
|
Page |
Specify the voice output speaker. |
|
|
|
* |
|
|
|
|
|
Output a beep from the speaker when a call comes in. |
|
|
|
* |
|
|
|
|
|
Display the firmware version and update the firmware. |
|
|
38 |
|
|
|
|
|
|
Setting the operation check sound (beep sound) ON/ |
|
|
|
— |
OFF. |
|
|
|
|
Sets the clock. |
|
— |
|
26 |
Sets the date. |
|
|
26 |
|
|
|
|
|
|
Sets the date display mode. |
|
|
26 |
|
|
|
|
|
|
Synchronizing the RDS station time data and this unit’s |
|
|
|
— |
clock. |
|
|
|
|
DSI (Disabled System Indicator) of the unit blinks when |
|
|
|
— |
the faceplate is removed. |
|
|
|
|
Sets whether the illumination is dimmed in conjunction |
|
|
|
* |
with the light switch of the vehicle or it is dimmed |
|
|
|
|
constantly. |
|
|
|
|
Sets whether the key illumination color (KDC-X993/ |
|
|
|
— |
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) |
|
|
|
|
is changed in conjunction with the key operation. |
|
|
|
|
Sets whether the key illumination color (KDC-X993/ |
|
— |
|
— |
KDC-X693) or brightness (KDC-HD942U/ KDC-MP642U) |
|
|
|
|
is changed in conjunction with the sound volume. |
|
|
|
|
Turns off the display when no operation is performed. |
|
— |
|
* |
|
|
|
|
|
Dims the display part in conjunction with the light |
|
|
|
* |
switch of the vehicle. |
|
|
|
|
|
|
|
|
|
Adjusting the display contrast. |
|
|
|
— |
|
|
|
|
|
Switches the panel display between positive or |
|
|
|
* |
negative. |
|
|
|
|
Turns on/off the built-in amplifier. |
|
|
|
* |
|
|
|
|
|
Specifies the destination of AUX input sound when the |
|
|
|
* |
Dual Zone function is turned on. |
|
|
|
|
Controls the connected LX amplifier. |
|
— |
26 |
|
|
|
|
|
|
Switches to the traffic information automatically when |
|
|
|
— |
the traffic bulletin starts. |
|
|
|
|
Switches to Monaural to decrease noise when |
|
|
|
— |
reception is poor. |
|
|
|
|
Sets the receive mode of HD Radio. |
|
|
|
* |
|
|
|
|
|
Displays the tag memory usage of HD Radio. Up to 50 |
|
|
19 |
|
tags can be registered to this unit. |
|
|
|
|
Turns ON / OFF the tag memory function of HD Radio. |
|
|
19 |
|
|
|
|
|
|
Displays the Electronic Serial Number of satellite radio. |
|
|
|
— |
|
|
|
|
|
Sets the display when switched to AUX source. |
|
|
12 |
|
Specifies whether the text is scrolled automatically. |
|
— |
|
— |
|
|
|
|
|
Deletes Favorite Preset Memory. |
|
|
34 |
|
|
|
|
|
|
Sets whether to display AUX during source selection. |
|
|
|
— |
|
|
|
|
|
Sets the CD read mode. |
|
|
|
* |
|
|
|
|
|
Specifies whether to enable demonstration. |
|
— |
27 |
|
8 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Category |
Item |
|
Setting |
Entry |
Setting overview |
Condition |
Page |
“SETUP” |
“Display |
“Type Select” |
“DISP TYPE |
|
Sets the display pattern. |
— |
10 |
|
Select” |
|
[A] – [D]” |
|
|
|
|
|
|
“Graphic Select” |
“Graphic 1 –2” |
|
Sets the Type C spectrum analyzer display. |
— |
— |
|
|
|
|
“Side Select” |
|
3 types |
|
|
Sets the Type A side display. |
|
— |
|
— |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Text Select” |
|
— |
|
|
Sets the Type A/B/C text display. |
|
— |
10 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Status” |
|
Appear/ |
|
|
Sets the Type A Status display. |
|
— |
10 |
||
|
|
|
|
|
|
Disappear |
|
|
|
|
|
|
|
|
|
“Color |
“All” |
|
“Variable Scan”* |
|
|
Sets the panel and display illumination color. |
|
|
12 |
||||
|
Select”* * |
|
|
/“Color 1” – |
|
|
|
|
|
|
|
|||
|
|
|
|
“Display” |
|
“Color 10”/ |
|
|
Sets the display illumination color. |
|
|
|
|
|
|
|
|
|
|
|
“User” |
|
|
|
|
|
|
|
|
|
|
|
|
“Right” |
|
|
|
Sets the right side of panel illumination color. |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Left” |
|
|
|
|
|
Sets the left side of panel illumination color. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“SOUND” |
“Control” |
“EQ” |
|
— |
|
|
Sets the sound quality. |
|
|
31 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Bass Boost” |
|
“OFF”*/ |
|
|
Sets the Bass Boost level in two steps. |
|
|
|
— |
|
|
|
|
|
|
|
“Step1” –“2” |
|
|
|
|
|
|
|
|
|
|
|
|
“HIGHWAY- |
|
“OFF”/“STEP1” |
|
|
Compensates the low volume or bass sound being lost |
|
|
|
* |
|
|
|
|
|
SOUND” |
|
/ “2”/“3”* |
|
|
by road noises to make vocal sound clearer. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Supreme+” |
|
“ON”*/“OFF” |
|
|
Turns ON/OFF the Supreme plus function. |
|
|
|
* |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“Position” |
|
— |
|
|
Compensates the sound environment in accordance |
|
|
32 |
||
|
|
|
|
|
|
|
|
|
|
with the listening position. |
|
|
|
|
|
“Setup” |
“Cabin” |
|
“Compact” etc. |
|
|
Selects the car type to compensate the distance |
|
|
29 |
||||
|
|
|
|
|
|
|
|
|
|
difference between each speaker. |
|
|
|
|
|
|
|
|
“Speaker” |
|
— |
|
|
Sets the connected speaker, speaker size, and |
|
|
29 |
||
|
|
|
|
|
|
|
|
|
|
installation position. |
|
|
|
|
|
|
|
|
“DTA” |
|
— |
|
|
Makes fine adjustment of the compensation value |
|
|
30 |
||
|
|
|
|
|
|
|
|
|
|
specified at Cabin. |
|
|
|
|
|
|
|
|
“X’Over” |
|
— |
|
|
Makes fine adjustment of the X’Over value specified at |
|
|
30 |
||
|
|
|
|
|
|
|
|
|
|
Speaker. |
|
|
|
|
|
“Preset” |
“Recall” |
|
— |
|
|
Registering the value setup by Sound Control. Recalling |
|
|
33 |
||||
|
|
|
|
|
|
|
|
|
|
the sound setup registered by <Audio Preset Memory>. |
|
|
|
|
|
|
|
|
“Memory” |
|
— |
|
|
Registering the value setup by Sound Control. |
|
|
33 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
“DSP Set” |
|
|
“Bypass”/ |
|
|
Setting “Bypass” passes the DSP function. |
|
|
|
— |
|||
|
|
|
|
|
|
“Through”* |
|
|
|
Setting “Through” activates the DSP function. |
|
|
|
|
“BT” |
“Voice |
|
|
— |
|
|
Calls by recognizing the registered voice. |
|
|
23 |
||||
|
Recognize” |
|
|
|
|
|
|
|
|
|
|
|
||
|
“Voice Tag” |
“PB Name Edit” |
|
— |
|
|
Registers voice for voice recognition. |
|
|
38 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“PN Type Edit” |
|
— |
|
|
Registers voice to select the Phone number category |
|
|
39 |
||
|
|
|
|
|
|
|
|
|
|
in Phonebook. |
|
|
|
|
|
“SMS” |
“SMS |
|
— |
|
|
Download a short message. |
|
|
40 |
||||
|
|
|
|
Download” |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
“SMS Inbox” |
|
— |
|
|
Display the received short message. |
|
|
40 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
⁄
•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.
•The connected cell-phone must have the SMS function to use the “SMS” function.
•Location played with “FILE SCAN”
-Audio file: First 10 seconds
-Music Editor media: First 10 seconds or the part picked by Intro Skip.
During Intro Skip, turn the control knob left or right to change the song.
The scan method depends on the Music Editor setting. See the Music Editor help for details.
English | 9
Display Settings
Display Type Selection
Shown below are examples of display types.
Display |
|
Display Type |
“TYPE [A]” |
|
Displays 4 to 5 lines of text. |
“TYPE [B]” |
|
Displays a line of text and video. |
“TYPE [C]” |
|
Displays a line of text and the spectrum analyzer. |
“TYPE [D]” |
|
Displays the clock. |
1Enter Display type selection mode
Select “SETUP” > “Display Select” > “Type Select”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Select the Display type
Turn the Control knob.
3Exit Display type selection mode
Press the [FNC] button.
⁄
•For how to switch the text display information, refer to <Text Display Selection> (page 10).
•When “TYPE [A]” is selected, the status (ON/OFF indicator of each function) can be displayed on the first line, and the icon of the currently selected source and the text information title can be displayed on the left side by the
following <Function Control> (page 6) operation.
Status display: Select “SETUP” > “Display Select” > “Status” Side display: Select “SETUP” > “Display Select” >
“Side Select”
•When “TYPE [C]” is selected, the spectrum analyzer can be switched by the following <Function Control> (page 6) operation.
: Select “SETUP” > “Display Select” > “Graphic Select”
Text Display Selection
Changes displayed information on each source following;
In Tuner source for KDC-X993/ KDC-X693
Information |
|
Display |
Frequency & Program Service name (FM) |
|
“Frequency/PS” |
Title & Artist name* (FM) |
|
“Title/Artist” |
Station name* (FM) |
|
“Station Name” |
Radio text plus* (FM) |
|
“Radio Text Plus” |
Radio text (FM)* |
|
“Radio Text” |
Spectrum analyzer & Clock (“TYPE [A]/[B]”) |
|
“Speana/Clock” |
or Clock (“TYPE [C]”) |
|
or“Clock” |
Date |
|
“Date” |
Blank |
|
“Blank” |
* Information of Radio text plus is displayed.
In HD Radio source for KDC-HD942U or KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300
|
Information |
|
Display |
|
Frequency |
|
“Frequency” |
|
Station name |
|
“Station Name” |
|
Title & Artist name |
|
“Title/Artist” |
|
Album & Artist name |
|
“Album/Artist” |
|
Genre |
|
“Genre” |
|
Spectrum analyzer & Clock (“TYPE [A]/[B]”) |
|
“Speana/Clock” |
|
or Clock (“TYPE [C]”) |
|
or“Clock” |
|
Date |
|
“Date” |
|
Blank |
|
“Blank” |
In Tuner source for KDC-MP642U |
|
|
|
|
Information |
|
Display |
|
Frequency |
|
“Frequency” |
|
Spectrum analyzer & Clock (“TYPE [A]/[B]”) |
|
“Speana/Clock” |
|
or Clock (“TYPE [C]”) |
|
or“Clock” |
|
Date |
|
“Date” |
|
Blank |
|
“Blank” |
In CD & External disc source |
|
|
|
|
Information |
|
Display |
|
Disc title |
|
“Disc title” |
|
Track title |
|
“Track title” |
|
Play time |
|
“P-Time” |
|
Spectrum analyzer & Clock (“TYPE [A]/[B]”) |
|
“Speana/Clock” |
|
or Clock (“TYPE [C]”) |
|
or“Clock” |
|
Date |
|
“Date” |
|
Blank |
|
“Blank” |
10 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
In Audio file/ iPod source
Information |
|
Display |
Title & Artist name |
|
“Title/Artist” |
Album & Artist name |
|
“Album/Artist” |
Folder name |
|
“Folder name” |
File name |
|
“File name” |
Play time |
|
“P-Time” |
Play time bar (iPod only)* |
|
“Time Bar” |
Spectrum analyzer & Clock (“TYPE [A]/[B]”) |
|
“Speana/Clock” |
or Clock (“TYPE [C]”) |
|
or“Clock” |
Date |
|
“Date” |
Blank |
|
“Blank” |
*Can be displayed only on the bottom line of “TYPE [A]” text.
In Standby/ Auxiliary input source
Information |
|
Display |
Source name |
|
“Source Name” |
Clock |
|
“Clock” |
Date |
|
“Date” |
Blank |
|
“Blank” |
In SIRIUS/ SAT source (Optional)
Information
Channel Name
Music Title
Artist Name
Composer name
Category Name
Label Name
Comment
Channel Number
Spectrum analyzer & Clock (“TYPE [A]/[B]”) or Clock (“TYPE [C]”)
Date
Blank
Display
“Channel Name”
“Song Title”
“Artist Name”
“Composer name”
“Category Name”
“Label Name”
“Comment”
“Channel Number”
“Speana/Clock” or“Clock”
“Date”
“Blank”
In XM source (Optional)
Information
Channel Name
Title
Name
Category Name
Channel Number
Spectrum analyzer & Clock (“TYPE [A]/[B]”) or Clock (“TYPE [C]”)
Date
Blank
Display
“CHANNEL NAME”
“TITLE”
“NAME”
“CATEGORY NAME”
“CHANNEL NUMBER”
“Speana/Clock” or“Clock”
“Date”
“Blank”
1Enter Text display selection mode
Select “SETUP” > “Display Select” > “Text Select”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Select the text display part
Push the Control knob towards up or down.
The selected text display part blinks.
3Select the text
Turn the Control knob.
4Exit Text display selection mode
Press the [FNC] button.
⁄
•If the selected display item does not have any information, alternative information is displayed.
•When LX-AMP is connected, the item setup by the Display mode of LX-AMP is displayed. (Function of KDC-X993/ KDC-X693)
•Some items cannot be selected depending on the display type and row.
•When selecting “Folder name” while playing with iPod, names will be displayed depending on currently selected browsing items.
•If the iPod Control by Hand Mode is set to on while playing the iPod, “iPod by Hand Mode” is displayed.
•If all characters cannot be displayed while playing with iPod, the file number in the list is displayed.
Information |
|
Display |
Music title |
|
“TITLE***” |
Folder name |
|
“FLD***” |
File name |
|
“FILE***” |
English | 11
Display Settings
Function of KDC-X993/ KDC-X693
Illumination Color Selection
Selecting the Illumination Color of the panel.
1Enter Illumination color selection mode
Select “SETUP” > “Color Select”.
For how to select Function Control item, refer to <Function Control> (page 6).
2Select the place where you want to set the Illumination Color
Place |
|
Display |
All |
|
“All” |
Display |
|
“Display” |
Right |
|
“Right” |
Left |
|
“Left” |
Turn the Control knob and push the center when the desired item is displayed.
3Select the Illumination Color
Turn the Control knob and push the center when the desired item is displayed.
Select the color from “Variable Scan”/ “Color1” — “Color 10”/ “User”.
Creating “User” color
You can create your original color during the selection from “Color1” — “Color10.”
The color you created can be called when you select “User”.
1.Press the Control knob for at least 1 second.
Enter the detail color adjustment mode.
2.Set the color.
Operation type |
|
Operation |
To select the color to adjust. Push the Control knob towards right |
||
(red, green, or blue) |
|
or left. |
To adjust color. |
|
Turn the Control knob or push it |
(Range: 0 – 9) |
|
towards up or down. |
3.Press the Control knob.
Exit the detail color adjustment mode.
4Exit Illumination color selection mode
Press the [FNC] button.
Auxiliary Input Display Setting
Selects the display when changing to Auxiliary input source.
1Select the AUX source
Press the [SRC] button.
2Enter Auxiliary input display setting mode
Select “MENU” > “Name Set”.
For how to select Function Control item, refer to <Function Control> (page 6).
3Enter Auxiliary input display setting mode
Press the Control knob for at least 1 second.
The presently selected Auxiliary input display is displayed.
4Select the Auxiliary input display
Turn the Control knob.
“AUX”/ “DVD”/ “PORTABLE”/ “GAME”/ “VIDEO”/ “TV”
5Exit Auxiliary input display setting mode
Press the [FNC] button.
⁄
•When operation stops for 10 seconds, the name at that time is registered, and the Auxiliary input display setting mode closes.
•The Auxiliary input display can be set only when the built-in auxiliary input or the auxiliary input of optional KCA-S220A is used. On the KCA-S220A, “AUX EXT” is displayed by default.
•AUX source is initially set to “OFF”. Before display setting, set “Built in AUX” described in <Function Control> (page 6) to “ON”.
: Select “MENU” > “Built in AUX”
12 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Music disc/Audio file Operation
Function of Audio file/ Internal CD source
Music Search
Selecting the music you want to listen to from the device or media being played now.
1Enter Music Search mode
Press the [
] button.
“SEARCH” is displayed.
Displays the current Audio file name.
2 Search for music
Audio file
Operation type |
|
Operation |
Movement between |
|
Turn the Control knob or push it towards |
folders/files |
|
up or down. |
Selection of folder/file |
|
Press the Control knob or push it towards |
|
|
right. |
Return to previous folder |
|
Push the Control knob towards left. |
Return to root folder |
|
Push the Control knob towards left for at |
|
|
least 1 second. |
“8” or “7” beside the displayed folder name indicates that this folder is preceded or followed by another folder.
File name is displayed with “¡” indicator.
Internal CD source
Operation type |
|
Operation |
Movement between track |
|
Turn the Control knob or push it towards |
|
|
up or down. |
Selection of track |
|
Press the Control knob. |
Return to first track |
|
Push the Control knob towards left for at |
|
|
least 1 second. |
Cancelling the Music Search mode
Press the [
] button.
⁄
• Music Search cannot be performed during Random play.
Function of iPod
Music Search for iPod
Search for the song (in iPod) you want to play.
1Enter Music Search mode
Press the [
] button.
2 Search for music
Operation type |
|
Operation |
Movement between items |
|
Turn the Control knob. |
Skip Search *1 |
|
Push the Control knob towards right or left. |
Selection of item |
|
Press the Control knob. |
Return to previous item |
|
Push the Control knob towards up. |
Return to Top menu |
|
Push the Control knob towards up for at |
|
|
least 1 second. |
Search by initial |
|
Push the Control knob towards down. Refer |
|
|
to the next section <Searching for Music |
|
|
by Initial>. |
Scroll bar is displayed on the right side of the screen.
Cancelling the Music Search mode
Press the [
] button.
⁄
•*1 Skip Search: The number of songs to be skipped is determined by the ratio of the total number of songs in the list which is selected now. Set the ratio with “Skip Search” in <Function Control> (page 6). Keep pushing Control knob for 3 seconds or longer skips songs at 10% irrespective of the setting.
•Characters that are included in a song name but cannot be displayed are left blank. If no character included in a song name cannot be displayed, the browse item name and digits are displayed.
Items |
|
Display |
|
Items |
|
Display |
Playlists |
|
“PLIST***” |
|
Podcasts |
|
“PDCT***” |
Artists |
|
“ART***” |
|
Genres |
|
“GEN***” |
Albums |
|
“ALB***” |
|
Composers |
|
“COM***” |
Songs |
|
“PRGM***” |
|
|
|
|
English | 13
Music disc/Audio file Operation
Function of iPod
Searching for Music by Initial
You can select an alphabetic character from the list in the browse item (artist, album, etc.) selected now.
1Enter Music Search mode
Press the [
] button.
2Start the alphabet search
Push the Control knob towards down.
“A B C …” is displayed.
•If you can not search for a song by an alphabetic character in the browse item selected now, the data on the screen does not change.
3 Select the initial to be searched for
Operation type |
|
Operation |
Move to the next character. |
|
Turn the Control knob or push it towards |
|
|
right or left. |
Move to the next row. |
|
Push the Control knob towards up or |
|
|
down. |
4Determine the selected initial
Press the Control knob.
Start search. When search is completed, the music search mode is selected again at the selected character position.
Cancelling the alphabet search
Press the [
] button.
⁄
•The time of search by alphabet may become long depending on the number of songs in iPod or the folder structure.
•When selecting an initial in the alphabet search, entering “*” searches symbols and entering “1” searches digits.
•If the first character string begins with an article “a”, “an”, or “the” in the alphabet search mode, it is searched for in defiance of the article.
Function of iPod
All Random
All songs in iPod are played at random.
Enter All random mode
Select “ALL RANDOM”.
For how to select Function Control items, refer to <Function Control> (page 6).
⁄
•The time required to turn on the all random function may become longer depending on the number of songs in iPod or the folder structure.
•Turning on the all random function changes the iPod browse item to “Songs”. This browse item will not change even if the all random function is turned off.
Function of iPod
iPod Control by Hand Mode
Allows you to operate iPod with the control on the iPod.
Enter iPod Control by Hand Mode
Select “iPod BY HAND”.
For how to select Function Control items, refer to <Function Control> (page 6).
⁄
•iPod will be paused when Hand mode is turned ON during playback.
•In the iPod Control by hand mode, iPod cannot be operated using this unit.
•This mode is not compatible with music information display. The display will show “iPod by Hand Mode”.
•iPod can be operated when it conforms to the iPod control function.
14 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function of remote control
Direct Music Search
Searchs the music by entering the track number.
1Enter the music number
Press the number buttons on the remote control.
2Search the music
Press the [4] or [¢] button.
Cancelling Direct Music Search
Press the [38] button.
⁄
•Direct Music Search cannot be performed during playing of iPod, “Music Editor” media, Random play, or scan play.
Function of disc changers with remote control
Direct Disc Search
Searchs the disc by entering the disc number.
1Enter the disc number
Press the number buttons on the remote control.
2Search the disc
Press the [FM+] or [AM–] button.
Cancelling Direct Disc Search
Press the [38] button.
⁄
•Direct Disc Search cannot be performed during playing of Random play or scan play.
•Input “0” to select disc 10.
Basic Operation of Disc Changer (Optional)
Selecting CD changer source
Press the [SRC] button.
Select the “CD CHANGER” display.
Music search
Push the Control knob towards right or left.
Disc Search
Push the Control knob towards up or down.
English | 15
Function of KDC-X993/ KDC-X693/ KDC-MP642U
Tuner Operation
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1Enter Auto Memory Entry mode
Select “AUTO MEMORY”.
For how to select Function Control items, refer to <Function Control> (page 6).
2Open Auto Memory Entry
Turn the Control knob to select “YES”, and then press the Control knob.
When 6 stations that can be received are put in the memory, auto memory entry closes.
Station Preset Memory
Putting a station in the memory.
1Select the frequency to put in the memory
Push the Control knob towards right or left.
2Enter Preset Memory mode
Press the [
] button.
3Select the number to put in the memory
Turn the Control knob.
4Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [
] button.
Preset Tuning
Recalling the stations in the memory.
1Enter Preset Tuning Select mode
Press the [
] button.
2Select a desired station in the memory
Turn the Control knob.
3Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [
] button.
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
“– – – –” is displayed.
2Enter the frequency
Press the number buttons on the remote control.
Example:
Desired frequency |
|
Press button |
92.1 MHz (FM) |
|
[0], [9], [2], [1] |
810 kHz (AM) |
[0], [8], [1], [0] |
|
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
⁄
•You can enter the FM band frequency in steps of a minimum of 0.1 MHz.
16 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Function of KDC-X993/ KDC-X693
PTY (Program Type)
Selecting the Program Type below and searching for a station;
Program Type |
Display |
|
Speech |
|
“Speech” |
Music |
|
“Music” |
News |
|
“News” |
Information |
|
“Inform” |
Sports |
|
“Sports” |
Talk |
|
“Talk” |
Rock |
|
“Rock” |
Classic Rock |
|
“ClsRock” |
Adult Hits |
|
“AdltHit” |
Soft Rock |
|
“Soft Rck” |
Top 40 |
|
“Top 40” |
Country |
|
“Country” |
Oldies |
|
“Oldies” |
Soft |
|
“Soft” |
Nostalgia |
“Nostalga” |
|
Program Type |
Display |
|
Jazz |
|
“Jazz” |
Classical |
|
“Classicl” |
R & B |
|
“R&B” |
Soft R & B |
|
“SoftR&B ” |
Language |
|
“Language” |
Religious Music |
“RelMusc” |
|
Religious Talk |
|
“RelTalk” |
Personality |
|
“Persnlty” |
Public |
|
“Public” |
College |
|
“College” |
Weather |
“Weather” |
|
•Speech and Music include the Program type shown below.
Music: Black character item. Speech: White character item.
1 Select PTY mode
Select “PTY SEARCH”.
For how to select Function Control items, refer to <Function Control> (page 6).
2Select the Program Type
Turn the Control knob.
3Search for the selected Program Type station
Push the Control knob towards right or left.
4Exit PTY mode
Press the Control knob.
⁄
•This function cannot be used during a traffic bulletin or AM reception.
•When the selected Program Type is not found, “No PTY” is displayed. Select another Program Type.
Function of KDC-X993/ KDC-X693
Program Type Preset
Putting the Program Type in the Preset button memory and quick recall.
Presetting the Program Type
1Select the Program Type to preset
Refer to <PTY (Program Type)> (page 17).
2Enter Program Type Preset mode
Press the [
] button.
3Select the number to put in the memory
Turn the Control knob.
4Determine the number to put in the memory
Press the Control knob for at least 1 second.
Recalling the preset Program Type
1Enter PTY mode
Refer to <PTY (Program Type)> (page 17).
2Enter Program Type Preset mode
Press the [
] button.
3Select a desired Program Type in the memory
Turn the Control knob.
4Recall the Program Type
Press the Control knob.
Function of KDC-X993/ KDC-X693
Registration of a Station as a PTY
Registering a Program Type for stations with no PTY data.
1 Receive the station you want to register
2Select the Program Type to register
Refer to <PTY (Program Type)> (page 17).
3Register the Program Type
Press the [FNC] button for at least 2 seconds.
Confirming the Program Type
Press the [FNC] button.
The Program Type is displayed for 3 seconds.
4Exit PTY mode
Press the Control knob.
English | 17
Function of KDC-HD942U
KDC-X993/ KDC-X693/ KDC-MP642U with KTC-HR300 (Optional Accessory)
HD Radio tuner control
Auto Memory Entry
Putting stations with good reception in the memory automatically.
1Enter Auto Memory Entry mode
Select “AUTO MEMORY”.
For how to select Function Control items, refer to <Function Control> (page 6).
2Open Auto Memory Entry
Turn the Control knob to select “YES”, and then press the Control knob.
When 6 stations that can be received are put in the memory, auto memory entry closes.
Preset Tuning
Recalling the stations in the memory.
1Enter Preset Tuning Select mode
Press the [
] button.
2Select a desired station in the memory
Turn the Control knob.
3Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [
] button.
Station Preset Memory
Putting a station in the memory.
1Select the frequency to put in the memory
Push the Control knob towards right or left.
2Enter Preset Memory mode
Press the [
] button.
3Select the number to put in the memory
Turn the Control knob.
4Determine the number to put in the memory
Press the Control knob for at least 2 seconds.
Cancelling the Preset Memory mode
Press the [
] button.
18 | KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
Loading...