DNX7180
DNX7480BT
DNX6980
DNX6180
DNX6040EX
DNX6480BT
DNX5180
GPS NAVIGATION SYSTEM
INSTRUCTION MANUAL
Before reading this manual, click the button below to check the latest edition and the modified pages.
Check the latest edition
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new GPS Navigation System.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX7180/ DNX7480BT/ DNX6980/ DNX6180/ DNX6040EX/ DNX6480BT/ DNX5180 Serial number
US Residence Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
© 2010 Kenwood Corporation All Rights Reserved. 11DNXMid_IM324_Ref_K_En_00 (K/K2/R)
What Do You Want To Do?
Thank you for purchasing the KENWOOD GPS NAVIGATION SYSTEM. In this manual, you will learn various convenient functions of the system.
Click the icon of the media you want to play.
With one-click, you can jump to the section of each media!
iPod |
USB |
VCD |
Tuner HD Radio |
Disc Media Music CD DVD VIDEO |
XM |
SIRIUS |
BT Audio Pandora
1
Before Use |
|
4 |
|
How To Read This Manual |
|
5 |
|
Basic Operations |
|
6 |
|
Functions Of The Buttons |
|
On The Front Panel___________________ |
6 |
Turning On The Unit__________________ |
10 |
How To Play Media___________________ |
13 |
Operating With The Top Menu Screen___ |
14 |
Common Operations_________________ |
16 |
Navigation Operation________________ |
18 |
DVD/Video CD (VCD) |
|
Operation |
|
20 |
|
DVD/VCD Basic Operation_____________ |
20 |
DVD Disc Menu Operation_____________ |
23 |
Zoom Control For DVD And VCD________ |
24 |
DVD Setup_ ________________________ |
25 |
CD/Audio And Visual Files |
|
/iPod Operation |
|
28 |
|
Music/Video/Picture Basic Operation____ |
28 |
Search Operation____________________ |
34 |
Movie Control_______________________ |
39 |
PANDORA® internet radio Operation____ |
40 |
USB/iPod/DivX Setup_________________ |
42 |
Radio, HD Radio™ And |
|
Satellite Radio Operation |
|
44 |
|
Radio/HD Radio Basic Operation________ |
44 |
SIRIUS/XM Basic Operation_ ___________ |
46 |
Memory Operation__________________ |
48 |
Selecting Operation__________________ |
48 |
Traffic Information (FM Tuner Only)_____ |
50 |
Receive Mode (HD Radio only)_ ________ |
51 |
iTunes Tagging (HD Radio only)________ |
51 |
SIRIUS Setup________________________ |
52 |
Bluetooth Control |
|
55 |
Registering And Connecting
Bluetooth Unit_ _____________________ 55
Playing Bluetooth Audio Device
_ _____________________ 58 Using Hands-Free Unit________________ 59 Bluetooth Setup_____________________ 62 Hands-Free Control_ _________________ 63
Setting Up |
|
70 |
Monitor Screen Setup_ _______________ 70 System Setup_______________________ 71 Display Setup_______________________ 74 Navigation Setup____________________ 77 Camera Setup_______________________ 78 Software Information_________________ 79 AV Input Setup______________________ 79 AV Output Interface Setup____________ 80 External Device Control_________ 80
Controlling Audio |
|
81 |
Setting Audio_______________________ 81 Controlling General Audio_____________ 84 Equalizer Control_ ___________________ 85 Zone Control_______________________ 87 Space Enhancer_______________ 88 Listening Position_ ____________ 88
Remote Controller |
|
90 |
Battery Installation___________________ 90
Functions Of The Remote Controller
Buttons____________________________ 91
2
Troubleshooting |
|
94 |
|
Problems And Solutions______________ |
94 |
Error Messages______________________ |
95 |
Resetting The Unit_ __________________ |
97 |
Appendix |
|
98 |
|
Playable Media And Files______________ |
98 |
Status Bar Indicator Items_ ____________ 101 Region Codes In The World_ ___________ 103 DVD Language Codes_ _______________ 104 Specifications_______________________ 105 About This Unit_____________________ 108
3
Before Use
2WARNING
To prevent injury or fire, take the following precautions:
•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.
•Do not watch or fix your eyes on the unit’s display when you are driving for any extended period.
•If you experience problems during installation, consult your Kenwood dealer.
Precautions on using this unit
•When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area.
•You can select language to display menus, audio file tags, etc. See Language setup (P.72).
•The Radio Data System or Radio Broadcast Data System feature won’t work where the service is not supported by any broadcasting station.
Protecting the monitor
To protect the monitor from damage, do not operate the monitor using a ball point pen or similar tool with the sharp tip.
Cleaning the unit
If the faceplate of this unit is stained, wipe it with a dry soft cloth such as a silicon cloth. If the faceplate is stained badly, wipe the stain off with a cloth moistened with neutral cleaner, then wipe it again with a clean soft dry cloth.
•Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erase screened print.
Lens fogging
When you turn on the car heater in cold weather, dew or condensation may form on the lens in the disc player of the unit.
Called lens fogging, this condensation on the lens may not allow discs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.
Precautions on handling discs
•Do not touch the recording surface of the disc.
•Do not stick tape etc. on the disc, or use a disc with tape stuck on it.
•Do not use disc type accessories.
•Clean from the center of the disc and move outward.
•When removing discs from this unit, pull them out horizontally.
•If the disc center hole or outside rim has burrs, use the disc only after removing the burrs with a ballpoint pen etc.
•Discs that are not round cannot be used.
•8-cm (3 inch) discs cannot be used.
•Discs with coloring on the recording surface or discs that are dirty cannot be used.
•This unit can only play the CDs with
.
This unit may not correctly play discs which do not have the mark.
•You cannot play a disc that has not been finalized. (For the finalization process see your writing software, and your recorder instruction manual.)
4
Return to the Top page
How To Read This Manual
Return to the Top page
CD, Disc, iPod, USB device
Search Operation
You can search the music, video, or picture le by some operations.
NOTE
•If you use a remote controller, you can jump directly to the desired track/ le with entering the track/folder/ le number, play time, etc. For details, see “Direct search mode” (p.81).
List search
You can search tracks, folders, and les according to hierarchy.
For USB devices and iPods, you can list and search les in the device by using playlist.
1 |
|
Press the <MENU> button during |
|
|
|||
|
|
playback. |
|
|
|
Simple Control screen appears. |
|
2 |
|
Touch [ |
]. |
|
|||
|
|
List Control screen appears. |
|
3 |
|
Touch desired track/•le. |
|
|
Playback starts.
Other search
When you want to narrow the list down, there are other search ways.
1 |
|
Press the <MENU> button during |
|
||
|
|
playback. |
|
|
Simple Control screen appears. |
2 |
|
Touch [ ]. |
|
The search type screen appears.
27
Link header
You can refer each section or top page with one-click.
Operation title
Introduces the function.
NOTE
Introduces some tips, notes, etc.
Reference mark
Displayed in blue notes.
With one-click, you can jump to the article related to the current section.
Operation procedure
Explains necessary procedures to achieve the operation.
< >: Indicates the name of panel
|
buttons. |
[ |
]: Indicates the name of touch |
|
keys. |
Screen shot
Shows some screen shots displayed during operation for reference.
The area or keys to touch are surrounded with a red frame.
NOTE
•The screens and panels shown in this manual are examples used to provide clear explanations of the operations.
For this reason, they may be different from the actual screens or panels used, or some display patterns may be different.
5
Return to the Top page
Basic Operations
DNX7180/DNX7480BT
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
NOTE
•The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
•In this manual, each model name is abbreviated as follows.
DNX7180 and DNX7480BT:
If above icon is showed, read the article applicable to the unit you use.
How To Insert An SD Card
1)Press 8 <0> button for 3 seconds.
The panel fully opens.
2)Hold the SD card as the diagram in the right and insert it into the slot until it clicks.
●To eject the card:
Push the card until it clicks and then remove your finger from the card.
The card pops up so that you can pull it out with your fingers.
Labelled side
0
6
|
|
Return to the Top page |
|
|
Basic Operations |
Number |
Name |
Motion |
1 |
fi(Reset) |
• If the unit or the connected unit fails to operate properly, the unit |
|
returns to factory settings when this button is pressed (P.97). |
|
|
|
•If the SI function is turned on, this indicator flashes when the vehicle ignition is off (P.72).
|
|
ATT |
• Switches attenuation of the volume on/off. |
|
2 |
||
|
|
• North America Sales area: Pressing for 1 second stores the tag data of |
|
|
|
|
|
|
|
|
the current music from HD Radio (P.51). |
|
|
|
• Central and South America sales area: Pressing for 1 second turns the |
|
|
|
screen off. |
|
|
|
|
|
|
∞, 5(Vol) |
Adjusts volume. |
|
3 |
||
|
|
Holding down a key turns up the volume in series up to 25. For more than |
|
|
|
|
|
|
|
|
25, pressing the key turns up the volume one by one. |
|
|
|
|
|
|
AUD |
• Displays Graphic Equalizer screen (P.86).* |
|
4 |
||
|
|
• Pressing for 1 second switches camera view display on/off. |
|
|
|
|
|
|
|
|
|
|
|
NAV |
• Displays the navigation screen. |
|
5 |
||
|
|
• Pressing for 1 second switches AV out sources. |
|
|
|
|
|
|
|
|
• When the power off, turns the power on. |
|
|
|
|
|
|
MENU |
• Displays the Top Menu screen (P.14). |
|
6 |
||
|
|
• Pressing for 1 second turns the power off. |
|
|
|
|
|
|
|
|
• When the power off, turns the power on. |
|
|
|
|
|
|
TEL |
• Displays the Hands Free screen (P.55). |
|
7 |
||
|
|
• Pressing for 1 second displays the Screen Control screen. |
|
|
|
|
|
|
|
|
• When the power off, turns the power on. |
|
|
|
|
|
|
0(Eject) |
• Ejects the disc. |
|
8 |
||
|
|
• Pressing for 1 second opens the panel to the location of the disc slot. |
|
|
|
|
|
|
|
|
When the panel is opened, pressing for 1 second closes the panel and |
|
|
|
pressing for 3 seconds ejects the disc forcibly. |
|
|
|
• When the panel is closed, pressing for 3 seconds fully opens the panel to |
|
|
|
the location of the SD card slot. |
|
|
|
|
|
|
Remote |
Receives the remote control signal. |
|
9 |
||
|
Sensor |
You can enable or disable this feature by Remote Sensor (P.71). |
|
|
|
||
|
|
|
|
|
|
Disc insert |
A slot to insert a disc media. |
|
10 |
||
|
slot |
|
|
|
|
|
|
|
|
SD card slot |
An SD card slot for upgrading the map. For how to upgrade the map, refer |
|
11 |
||
|
|
to the instruction manual of the navigation system. |
* The display may not switch to the Graphic Equalizer screen in some conditions.
7
Return to the Top page
Basic Operations
DNX6980/DNX6180/DNX6040EX/DNX6480BT/DNX5180
1 |
7 |
8 |
9 |
2 |
|
3 |
DNX6480BT |
4 |
|
5 |
6
10
DNX6480BT
DNX6980
NOTE
•The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual panels.
•In this manual, each model name is abbreviated as follows.
DNX6980, DNX6180, DNX6040EX, and DNX6480BT:
DNX5180:
If above icons are showed, read the article applicable to the unit you use.
How To Insert A MicroSD Card
1) Open the 10 microSD card slot cover as the diagram in the right.
2) Hold the microSD card with the label side facing left and the notched section up and insert it into the slot until it clicks.
● To eject the card:
Push the card until it clicks and then remove your finger from the card.
The card pops up so that you can pull it out with your fingers.
8
|
|
Return to the Top page |
|
|
Basic Operations |
Number |
Name |
Motion |
1 |
fi(Reset) |
• If the unit or the connected unit fails to operate properly, the unit |
|
returns to factory settings when this button is pressed (P.97). |
|
|
|
•If the SI function is turned on, this indicator flashes when the vehicle ignition is off (P.72).
|
|
MENU |
• Displays the Top Menu screen (P.14). |
|
2 |
||
|
|
• Pressing for 1 second turns the power off. |
|
|
|
|
|
|
|
|
• When the power off, turns the power on. |
|
|
|
|
|
|
NAV |
• Displays the navigation screen. |
|
3 |
||
|
|
• Pressing for 1 second switches AV out sources. |
|
|
|
|
|
|
|
|
|
|
|
TEL |
• Displays the Hands Free screen (P.55). |
|
4 |
||
|
|
• North America Sales area: Pressing for 1 second stores the tag data of |
|
|
|
|
|
|
|
|
the current music from HD Radio (P.51). |
|
|
|
• Central and South America sales area: Pressing for 1 second turns off |
|
|
|
the display. |
|
|
|
|
|
|
Volume Knob |
• Pressing switches attenuation of the volume on/off. |
|
5 |
||
|
|
• Turning adjusts volume up or down. |
|
|
|
|
|
|
|
|
• Pressing for 1 second displays Tone Control screen (P.87).* |
|
|
|
|
|
|
SCRN |
• Displays the Screen Control screen. |
|
6 |
||
|
|
• Pressing for 1 second displays rear view camera display. |
|
|
|
|
|
|
|
|
|
|
|
Remote |
Receives the remote control signal. |
|
7 |
||
|
Sensor |
You can enable or disable this feature by Remote Sensor (P.71). |
|
|
|
||
|
|
|
|
|
|
0(Eject) |
• Ejects the disc. |
|
8 |
||
|
|
• Pressing for 1 second ejects the disc forcibly. |
|
|
|
|
|
|
|
|
|
|
|
Disc insert |
A slot to insert a disc media. |
|
9 |
||
|
slot |
|
|
|
|
|
|
|
|
MicroSD |
A microSD card slot for upgrading the map. For how to upgrade the map, |
|
10 |
||
|
card slot |
refer to the instruction manual of the navigation system. |
* The display may not switch to the Tone Control screen in some conditions.
9
Return to the Top page
Basic Operations
The method of turning on is different depending on the model.
1 Press the <NAV>, <MENU>, or <TEL> button.
The unit is turned on.
●●To turn off the unit:
Press the <MENU> button for 1 second.
1 Press the <MENU> button.
The unit is turned on.
●●To turn off the unit:
Press the <MENU> button for 1 second.
If it is your first time turning the unit on after installation, it will be necessary to perform
Initial setup (P.11).
10
Return to the Top page
Basic Operations
Initial setup
Perform this setup when you use this unit first time or when you reset the unit (P.97).
1 Set each item as follows.
Language
Select the language used for the control screen and setting items. Default is “American English (en)”. 1Touch [SET].
2Touch [2] or [3] to select the desired language. 3Touch [Enter].
For detailed operation, see Language setup (P.72).
Angle
Adjust the position of the monitor. Default is “0”. 1Touch [SET].
2Touch desired angle number and [ |
]. |
For detailed operation, see Monitor angle control (P.74). |
iPod AV Interface Use
Set the terminal which your iPod is connected to. Default is “iPod”. 1Touch [iPod] or [AV-IN2].
Color
Set the screen and button illumination color. You can select whether to allow color scan operation or select a fixed color for operation.
1Touch [SET]. |
|
|
|
2Touch [ON] or [OFF] of [Panel Color Scan]. |
|
||
3If you want to change color, touch [SET] of [Panel Color Coordinate]. |
|
||
4Touch your desired color and [ |
]. |
|
|
For detailed operation, see Panel color coordinate (P.75). |
|
||
EXT SW |
|
|
|
Control the external devices. |
|
|
|
1Touch [SET]. |
|
|
|
2Set device name, output pattern, and pulse set for each device. Then, touch [ |
]. |
||
For detailed operation, see EXT SW setup (P.73). |
|
||
Camera |
|
|
|
Set the parameters for the camera. |
|
||
1Touch [SET]. |
|
|
|
2Set each item and touch [ |
]. |
Continued |
|
For detailed operation, see Camera Setup (P.78). |
|||
|
11
Return to the Top page
Basic Operations
2 Touch [Finish].
NOTE
• These settings can be set from the SETUP menu. See Setting Up (P.70).
12
Music CD and disc media
1 Press the <0> button for 1 second.
The panel opens.
2 Insert the disc into the slot.
The panel closes automatically.
The unit loads the disc and playback starts.
●●To eject the disc:
Press the <0> button when the panel is closed.
1 Insert the disc into the slot.
The unit loads the disc and playback starts.
Return to the Top page
Basic Operations
●●To eject the disc:
Press the <0> button.
USB device
1Connect the USB device with the USB cable.
The unit reads the device and playback starts.
●●To disconnect the device:
Touch [0] for 1 second on the screen and disconnect the device from the cable.
iPod
1Connect the iPod with the iPod cable.
The unit reads the iPod and playback starts.
●●To disconnect the device:
Touch [ ] on the screen and then touch
[0] for 1 second. Disconnect the iPod from the cable.
13
Return to the Top page
Basic Operations
Most functions can be performed from the Top Menu screen.
1 Touch [Menu] on any screen.
NOTE
• If [Menu] is not displayed during video/picture playback, press the <MENU> button.
(P.6, P.8)
Top Menu screen appears.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE |
|
|
|
|
|
|
|
• You can select the |
|
|
|
|
|
|
|
hiding icon by |
|
|
|
|
|
|
|
scrolling the screen |
|
|
|
|
|
|
|
left or right. |
|
From this screen, you can perform the following functions. |
|
|
|
||||
|
|
|
|||||
|
Function |
|
Icon |
|
Operation |
||
|
|
|
|||||
|
Switch the audio source |
|
|
|
Touch the icon of the |
||
|
|
|
|
|
desired source. |
||
|
|
|
etc. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter setup mode |
|
|
|
Touch the icon of the |
||
|
|
|
|
|
desired setup function. |
||
|
|
etc. |
|
|
|
||
|
|
|
|
|
|
|
|
|
Display navigation |
|
|
|
Touch [NAV] or |
||
|
screen |
|
|
|
navigation information. |
||
|
|
or |
|
|
|
||
|
|
|
|
|
|
|
|
|
Turn off all audio |
|
|
|
Touch [STANDBY]. |
||
|
function |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14
Return to the Top page
Basic Operations
●●Customizing Top Menu screen
Drag the icon you want to register to the upper line.
You can move up to three icons.
15
Return to the Top page
Basic Operations
Introduces the common operations.
General
There are some functions which can be operated from most screens.
[Menu]
Returns to the Top Menu screen.
(RETURN)
Returns to previous screen.
(common menu key)
Touch to display the common menu. The contents of the menu are as follows.
:Displays the EXT SW Control screen.
: Displays the SETUP Menu screen.
: Displays the Audio Control Menu screen.
: Displays the control screen of current source. Icon feature differs depending on the source.
: Closes the menu.
List screen
There are some common function keys in the list screens of most sources.
(Scroll)
Scrolls the displayed text. etc.
|
|
|
Touch keys with various functions are |
||
|
|
|
displayed here. |
||
|
|
|
Displayed keys differ depending on the |
||
|
|
|
current audio source, status, etc. |
||
|
|
|
For examples of functions of each key, refer |
||
|
|
|
to the table below. |
||
|
|
|
|
|
|
|
Key |
|
Function |
|
|
|
|
|
|||
|
|
|
Lists all the music in the lower hierarchy. |
|
|
|
|
|
|
|
|
|
|
|
Moves to the upper hierarchy. |
|
|
|
|
|
|
|
|
|
|
|
Displays current category folder. |
|
|
|
|
|
|
|
|
|
|
|
Displays music/picture/movie file list. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
16
Return to the Top page
Basic Operations
Flick scrolling
You can scroll the list screen by flicking the screen up/down or right/left.
17
Return to the Top page
Basic Operations
For details on the navigation function, please refer to the Navigation Instruction Manual.
Display the navigation screen
1 Press the <NAV> button.
The navigation screen appears.
Control audio from the navigation screen
You can control audio sources while the navigation screen is displayed.
Also, you can view the navigation information while the source control screen is displayed.
1 Touch the information bar.
The navigation screen with audio information appears.
18
Return to the Top page
Basic Operations
2 Touch [ ] or [ ] in the navigation screen.
Touching this area displays the audio screen.
: Displays the navigation and control keys of the current source.
: Displays the navigation and current video/picture playback display.
NOTE
•The screen switches between playback screen and camera view each time the viewing area is touched.
•Touching the source icon in the bottom of the screen displays the full audio screen.
●●To return to the full navigation screen:
Touch [ ].
NOTE
• For details on control keys, refer to the instructions in each section.
19
Return to the Top page
DVD, VCD
Most functions can be controlled from the source control screen and playback screen.
NOTE
•Set the remote controller mode switch to DVD mode before starting operation, see Switching the operation mode (P.91).
•The screen shot below is for DVD. It may be different from the one for VCD.
Control screen
1 |
6 |
5 |
2 |
3 |
4 |
Video screen
6 |
7 |
8 |
1 Information display
Displays the following information.
•Title #, Chap #: DVD title and chapter number display
•Track #/Scene #: VCD track or scene number display *Scene # is displayed only when PBC is on.
•3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3(play), ¡(fast forward), 1(fast backward),
¢(search up), 4(search down), 7(stop), 7R (resume stop), 8(pause),(slow playback), (slow reverse playback).
Touch this area to display the disc lable name.
2 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.22).
3 Multi function menu
Various functions can be performed by using keys in this area. For details on the keys, see Multi function menu (P.22).
4 Control switching key
Unavailable in DVD/VCD source.
20
Return to the Top page
DVD, VCD
5 Sub function menu
The following functions can be performed by using keys in this area.
• Repeats the current content: Touch [ ]. Each time you touch the key, repeat mode switches in the following sequence;
DVD: "title repeat" , "chapter repeat" , "function off" VCD (PBC On): Does not repeat
VCD (PBC Off ): "track repeat" , "function off"
•Hides all keys: Touch [ ].
•Fast forward or fast backward: Touch [1] or [¡]. Each time you touch the key, the speed
changes; standard, 2 times, 3 times.
• Confirms play time: See #:##:##.
DVD: You can switch the time display between title play time, chapter play time, and title remaining time. Each time you touch, the display switches between “T #:##:##” (title play time display), “C #:##:##” (chapter play time display), and “R #:##:##” (title remaining time display).
As well as the time display, the bar indicating current location appears.
VCD (PBC off): You can also confirm disc remaining time by touching time display. Each time you touch, the display switches between “P ##:##” (play time display) and “R ##:##” (disc remaining time).
• Confirms the current location: See the bar in center (DVD only). The bar does not appear when the time display is remaining time display.
6 Searching area
Touch to search the next/previous content.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch center of the display.
7 Menu display area
This area functions differently depending on the current status.
• During DVD playback: Displays the DVD menu. During the menu display, displays the highlight control screen.
• During VCD playback: Displays the Zoom Control screen (P.24).
8 Key display area
Touch to display the last control screen.
NOTE
•If you use a remote controller, you can jump directly to the desired image with entering the chapter number, scene number, play time, etc (P.91).
21
Return to the Top page
DVD, VCD
|
Multi function menu |
DVD |
VCD |
The functions of each key are as follows.
[4] [¢]
Searches the previous/next content.
[38]
Plays or pauses.
[] or [] (DVD only)
Plays in slow motion forward or backward.
[7]
Stops playback. When touched twice, the disc is played from the beginning when you play it the next time.
[PBC] (VCD only)
Turn PBC on or off.
[ SETUP]
Touch to display the SETUP Menu screen. See Setting Up (P.70).
[ AUDIO]
Touch to display the Audio Control screen. See Controlling Audio (P.81).
[ EXT SW]
Touch to control the external device power supply. For details, see External Device Control (P.80).
22
You can set up some items in the DVD-VIDEO disc menu.
1 Touch illustrated area during playback.
Menu Control screen appears.
2 Perform desired operation as follows.
Displays the top menu
Touch [Top].*
Displays the menu
Touch [Menu].*
Displays the previous menu
Touch [Return].*
Enters selected item
Touch [Enter].
Enables direct operation
Touch [Highlight] to enter the highlight control mode (P.23).
Moves the cursor
Touch [5], [∞], [2], [3].
*These keys may not function depending on the disc.
Return to the Top page
DVD, VCD
Highlight control
Highlight control lets you control the DVD menu by touching the menu key directly on the screen.
1 |
|
Touch [Highlight] in the Menu Control |
|
||
|
|
screen. |
2 |
|
Touch desired item on the screen. |
|
NOTE
•The highlight control is cleared automatically if you do not operate for a constant time.
DVD Play Mode Setting
You can select DVD play mode.
1 Touch [Next] in the Menu Control screen.
Menu Control 2 screen appears.
Continued
23
Return to the Top page
DVD, VCD
2 Touch the key which corresponds to desired setting item.
Switches the subtitle language
Touch [Subtitle]. Each time you touch this key, language is switched.
Switches the audio language
Touch [Audio]. Each time you touch this key, language is switched.
Controls zoom ratio
Touch [Zoom]. For details, see step2 in Zoom Control For DVD And VCD (P.24).
Switches the picture angle
Touch [Angle]. Each time you touch this key, picture angle is switched.
Exits menu control
Touch [Exit].
Displays the Menu Control 1 screen
Touch [Previous].
You can enlarge Playback screen for DVD and VCD.
1 For VCD, touch illustrated area during playback.
Zoom Control screen appears.
NOTE
•For DVD, please refer to DVD Play Mode Setting (P.23) to display the Zoom Control screen.
2 Perform desired operation as follows.
Switches zoom ratio
Touch [Zoom].
For DVD, changes the zoom ratio at 4 levels; Off, 2 times, 3 times, 4 times.
For VCD, changes the zoom ratio at 2 levels; Off, 2 times.
Scrolls the screen
Touch [5], [∞], [2], or [3] to scroll the screen in the direction you touch.
Exits menu control
Touch [Exit].
Displays the previous menu*
Touch [Return].
*This function may not be performed depending on the disc.
NOTE
•You cannot touch the menu keys directly on the screen when zooming.
24
You can set up the DVD playback functions.
NOTE
•Each operation in this section can be started from the Top Menu screen. For details, see Operating With The Top Menu Screen (P.14).
1Touch [ ] in the control screen.
Multi function menu appears.
2Touch [SETUP].
SETUP Menu screen appears.
3Touch [Source].
|
|
Source SETUP Menu screen appears. |
4 |
|
Touch [DVD SETUP] in the list. |
|
||
|
|
DVD SETUP screen appears. |
5 |
|
Set each item as follows. |
|
Return to the Top page
DVD, VCD
Menu/Subtitle/Audio Language*
See Language setup (P.26).
Dynamic Range Control*
Sets the dynamic range.
Wide: The dynamic range is wide. Normal: The dynamic range is normal. Dialog (Default): Makes the total sound
volume larger than other modes. This is effective only when you are using Dolby Digital software.
Angle Mark
Sets an angle mark display.
ON (Default): An angle mark appears. OFF: An angle mark does not appear.
Screen Ratio*
Sets the screen display mode.
16:9 (Default): Displays wide pictures.
4:3 LB: Displays wide pictures in the Letter Box format (having black stripes at the top and bottom of screen).
4:3 PS: Displays wide pictures in the Pan & Scan format (showing pictures cut at the right and left ends).
Parental Level*
See Parental level (P.26).
DISC SETUP
See Disc setup (P.27).
Stream Information
Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM, MPEG, WMA or AAC) appears.
*These items are disabled when a DVD is being played.
25
Return to the Top page
DVD, VCD
Language setup
This setting is for the language used in the menu, subtitle, and voice. You cannot setup these items during DVD playback.
1 |
|
Touch [SET] of the desired |
|
||
|
|
item; [Menu Language], |
|
|
[Subtitle Language], |
|
|
[Audio Language]. |
|
|
Language Set screen appears. |
2 |
|
Enter the desired language code and |
|
||
|
|
touch [Enter]. |
Sets the entered language and returns to the DVD SETUP screen.
NOTE
•To cancel the setup and return to the previous screen, touch [Cancel].
•To clear the entered code, touch [Clear].
•To set the DVD’s original language for audio language, touch [Original].
Parental level
Sets a parental level. You cannot setup this item during DVD playback.
1 |
|
Touch [SET] of [Parental Level]. |
|
||
|
|
Parental Pass screen appears. |
2 |
|
Enter the parental code and touch |
|
||
|
|
[Enter]. |
|
|
Parental Level screen appears. |
NOTE
•To cancel the setup and return to the previous screen, touch [Cancel].
•To clear the entered code, touch [Clear].
•Current parental level appears as [Level#].
3 Touch [2] or [3] to select a parental level.
NOTE
•If a disc has higher parental lock level, you need to enter the code number.
•The parental lock level varies depending on a loaded disc.
•If a disc has no parental lock, anybody can play it back even when you have set the parental lock.
26
Return to the Top page
DVD, VCD
Disc setup
Performs setup when using disc media.
1 |
|
Touch [SET] of [DISC SETUP]. |
|
||
|
|
DISC SETUP screen appears. |
2 |
|
Select an option as follows. |
|
CD Read
Sets the motion of this unit when a music CD is played.
1 (Default): Automatically recognizes and plays back an audio file disc, a DVD or a music CD.
2: Forcibly plays back a disc as a music CD. Select [2] if you wish to play a music CD having a special format or if you cannot play a disc in [1] position.
On Screen DVD
Sets an on-screen display.
Auto: When updated, information appears for 5 seconds.
OFF (Default): Information does not appear.
NOTE
•[CD Read] is not available when a disc is in the unit.
•You cannot play an audio file/VCD disc in the [2] position. Also, you may not play some music CDs in the [2] position.
27
Return to the Top page
CD, Disc, iPod, USB device
Most functions can be controlled from the source control screen and playback screen.
NOTE
•Set the remote controller mode switch to AUD mode before starting operation, see Switching the operation mode (P.91).
•To connect iPod to this unit, optional accessory KCA-iP202 is necessary.
See the following sections for each source operation.
• Music CD (P.28) |
• USB device (P.30) |
• Disc media (P.28) |
• iPod (P.30) |
Music CD and disc media
NOTE
•In this manual, “Music CD” will be referred to as the general CDs which include music tracks in. “Disc media” will be referred to as CD/DVD disc which includes audio, picture or video files.
•The screen shot below is for CD. It may be different from the one for disc media.
Simple Control screen
1 |
2 |
3 |
4 |
5 |
3 |
List Control screen
2 |
6 |
7 |
4 |
8 |
1 Information display
Displays the following information.
•Track #: Each time you touch this area, display switches between current track number, text, etc.
•3, ¡, ¢, 7, etc.: Current play mode display
The meanings of each icon are as follows; 3(play), ¡(fast forward), 1(fast backward), ¢(search up), 4(search down), 7(stop), 7R (resume stop), 8 (pause).
2 Movie display area/Control switching area
Touch to switch between the Simple Control and List Control screen.
3 Multi function key
Touch to switch the multi function menu. For details on the menu, see Multi function menu (P.32).
28
Return to the Top page
CD, Disc, iPod, USB device
4 Multi function menu
Various functions can be performed by using keys in this area. For details on the menu, see Multi function menu (P.32).
5 Sub function key
Touch to display “Sub function menu” (7 in this table).
6 Track information
Displays the information of the current track.
For music CD and disc media, you can switch the current track information and the current folder list by touching the list switching key (8 in this table).
However, only "No Information" is displayed for music CD.
7 Sub function menu
Various functions can be performed by using keys in this area. For details on the keys, see Sub function menu (P.33).
8 List switching key
Touch to switch between the track list and the CD-TEXT display (CD)/ID3 tag information (disc media only).
Video screen (disc media only)
9 |
9 |
10 |
11 |
9Searching file area (disc media only)
Touch to search the next/previous file.
Scrolling from center of display to left or right performs fast backward or fast forward. Each time you touch each area, the speed changes; standard, 2 times, 3 times. To stop fast backward/forward, touch center of the display.
10Menu display area (disc media only)
Touch to display the disc menu. For details, see Movie Control (P.39).
11 Key display area (disc media only)
Touch to display the last control screen.
29