Kenmore Elite 10049090, 10049803 Owner’s Manual

Use & Care Guide
Manual de Uso y Cuidado
English / Español
Customer Assistance/Asistencia al Cliente
Help us help you! / ¡Ayúdenos a ayudarle!
Please register your appliance: /
Por favor registre su electrodoméstico:
Sears Brands Management Corporation
Homan Estates, IL 60179 U.S.A.
5-Quart Stand Mixer
Batidora con Pedestal de 5 Cuartos de Galón
Models / Modelos:
100.49803 - Burgundy / Vinotinto
100.49090 - Metallic Gray / Gris Metálico
When using electrical appliances, basic safety precautions should always be
followed, including the following:
1. READ all instructions. KEEP these instructions for future use.
2. To protect against fire, electric shock and injury to persons,
DO NOT immerse cord, plug, or the Stand Mixer in water or other liquids.
3. NEVER pour boiling water into the glass mixer bowl or use the bowl for cooking
or heating purposes. Extreme temperatures can cause the glass bowl to break
or shatter.
4. Close supervision is necessary when any appliance is used by or near children.
5. UNPLUG Stand Mixer from outlet when not in use, before putting on or taking
off parts and before cleaning.
6. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas
and other utensils away from beater during operation to reduce the risk of
injury to persons or damage to the Mixer.
7. DO NOT operate any appliance with a damaged cord or plug, or after the
appliance malfunctions or has been dropped or damaged in any manner.
Take appliance to a qualified service dealer for examination and possible repair.
8. The use of accessories or attachments not recommended by the appliance
manufacturer may result in fire, electric shock or injury to persons.
9. DO NOT use accessories or attachments other than those referenced in this
Use & Care Guide.
10. DO NOT use outdoors.
11. NEVER let the cord hang over the edge of table or counter, or touch hot surfaces.
12. Remove mixing bowl, flat beater, wire whisk or dough hook from Stand Mixer
before washing them.
13. DO NOT use this appliance for anything other than its intended use.
14. To protect against electrical shock, this appliance is equipped with a cord having a
3-prong grounding-type plug for insertion into a proper grounding-type receptacle.
DO NOT alter the plug for use in a 2-prong receptacle. If the plug will not fit into
a receptacle, have the proper receptacle installed by a qualified electrician.
15. This product is designed for household use only.
If any parts are missing or damaged after unpacking product box, or to order
replacement parts after product use, call the following number: 1-855-438-7899.
NOTE: Your call will be answered only in English.
Fig. 1
Easy Pour Funnel
Speed Control Dial
Work Light
Tilt Head
Release Lever
Tilt and Glide
Splash Guard
Attachment Shaft
Clamping Plate
Included Accessories
These pictured accessories are
described in the Accessories
and Their Uses table in the
Operation section of this
Use & Care Guide.
Flat Beater
Bowl Lid
Egg Separator
Tilt Head Lift Handle
5 Quart Bowl
Cord Storage
(not shown)
Splash Guard
• Remove packing material, plastic, labels, stickers or tags that are attached to the
mixer, bowl or accessories.
Hand wash the Glass Bowl, Bowl Lid, Bowl Clamping Plate, Splash Guard, Easy Pour
Funnel Insert, Flat Beater, Wire Whisk, Dough Hook, Egg Separator and Grater in
warm, sudsy water. Thoroughly rinse and dry all items.
• Clean the outside of the Stand Mixer only with a soft damp cloth, then use dry
soft cloth to wipe dry.
TILT HEAD (See Fig. 1)
• To attach and remove accessories and bowl you must tilt back the Mixer Head by
means of the release lever on the right side of the mixer (with the front facing you).
• To unlock the Head from operation position, press lever down with one hand,
then with other hand guide spring loaded Head up to lock into raised position.
• To unlock Head from raised position, press lever down with one hand and push
Head down until it locks into operation position.
Glides are built into the bottom of the Mixer to allow easy movement from one
location to another across the same surface. To use, first lower Tilt Head into locked
position. With one hand lift up on Tilt Head Lift Handle to tilt Mixer back onto glides.
With other hand grasp Mixer base at front and push to new location.
Lower Mixer back into operation position.
WARNING: To avoid serious injury, keep fingers and hands away from
hinge area when raising or lowering Tilt Head.
WARNING: To prevent injury to persons or product damage, NEVER pour
boiling water into the glass mixer bowl or use the bowl for heating or cooking
purposes. Extreme temperatures can cause the glass bowl to break or shatter.
: NEVER submerge the Mixer in water. It will be permanently
damaged. NEVER use abrasive cleaning agents or scouring pads to clean
mixer surfaces. They will be permanently scratched.
1. Turn speed dial to 0.
2. Unplug mixer from electrical outlet.
3. Press down release lever to tilt head back.
4. Place bowl in Bowl Clamping Plate.
5. Turn bowl clockwise until snug.
WORK LIGHT The work light is an LED that shines continuously during mixer
operation to help illuminate mixer bowl contents. It also flashes to alert you of
operational errors or motor overheating. See Operation Safety Features section.
CORD STORAGE The power cord is stored in
the base of the mixer. Grasp cord by plug and
raise out of slot. Carefully pull the cord out of
the mixer and secure it by pressing it down into
the slot. The cord is 3-1/2 feet long.
Be careful not to overextend the cord.
Push the cord all the way back into the
base when finished using mixer.
EASY POUR FUNNEL The Easy Pour Funnel allows you to add ingredients directly
into the mixing bowl from the top of the mixer.
1. Turn speed dial to 0.
2. Unplug mixer from electrical outlet.
3. Press down release lever to tilt head back.
4. Turn bowl counterclockwise until loosened and pull up and out of Bowl Clamping Plate.
Fig. 3
• Rest the Mixer on a level and stable dry countertop or table surface.
Also, be sure that the Mixer is at a safe distance from the surface edge to prevent
it from falling off. There must also be enough room around the back of the Mixer
for sufficient air flow through the Mixer motor air vents.
Cord Storage
Tilt Head
Fig. 2
+ 5 hidden pages