K 2.97 M
High Pressure |
|
Washer Operator |
|
Manual |
|
Overview ....................................... |
2 |
Important Precautions ............ |
3 - 4 |
Assembly Instructions ................. |
4 |
Operating Instructions ................. |
5 |
Using the accessories ................. |
6 |
Working with Detergents ............. |
7 |
Shut Down and Clean-Up |
............ 8 |
Taking a Break ............................. |
8 |
Winterizing and Long-Term |
|
Storage ......................................... |
8 |
Cleaning Tips ....................... |
9 - 10 |
Optional Cleaning Accessories . 10 |
|
Troubleshooting .................. |
11 - 12 |
Specifications |
|
Operating pressure |
8000 kPa |
Max. Pressure |
1400 PSI |
Water volume |
1.6 GPM |
Voltage |
120 V |
Amp draw |
13 AMPS |
Please keep the original box, packaging and receipt.
Before operating this unit, please read this manual thoroughly and retain it for future reference.
Part No. 1.421-212.0 |
Manual Part No. 5.960-786.0 01/03EN |
Model K 297 OVERVIEW
Item Description
1.Power cord
2.Trigger gun
3.Trigger gun safety lock
4.High pressure hose
5. Water inlet with filter
6. Retractable handle
7. Accessory holder
8. Detergent suction tube with filter
9. High pressure outlet
10.On/Off switch
11.High pressure spray nozzle
12. Rotary nozzle
2
NEVER!
Never point nozzle at people or animals.
Never drink alcohol or use drugs while operating this equipment.
Never operate while standing in water.
Never touch plug with wet hands.
Never let electrical connections rest in water.
Never operate pressure washer without the water turned on
Never use hot water
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
When using this product, basic precautions should always be followed:
•Read all the instructions before using the product.
•High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.
•To reduce the risk of injury, do not operate the machine near children.
•Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.
•Stay alert — watch what you are doing.
•Wear safety goggles.
•Do not use acids, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
•Do not operate the product when fatigued or under the influence of alcohol or drugs.
•Keep operating area clear of all persons.
•Do not stand on unstable surfaces.
Stand with both feet balanced at all times.
•To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
•The Trigger Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.
WARNING
•DO NOT USE WITH FLAMMABLE LIQUIDS AND TOXIC CHEMICALS
• I N J E C T I O N H A Z A R D : E Q U I P M E N T C A N C A U S E S E R I O U S I N J U R Y I F T H E S P R A Y PENETRATES THE SKIN. DO NOT POINT THE G U N A T A N Y O N E O R A N Y P A R T O F T H E
B O D Y . I N C A S E O F P E N E T R A T I O N S E E K MEDICAL AID IMMEDIATELY.
•THIS SYSTEM IS CAPABLE OF PRODUCING 8000 KPA. TO AVOID RUPTURE AND INJURY, DO NOT OPERATE THIS PUMP WITH COMPONENTS RATED LESS THAN 8000 KPA WORKING PRESSURE (INCLUDING BUT NOT LIMITED TO SPRAY GUNS, HOSE AND HOSE CONNECTIONS).
•BEFORE SERVICING, CLEANING OR REMOVAL ANY PARTS, SHUT OFF POWER
AND RELIEVE PRESSURE.
Extension Cords
Use a sufficient gauge: Up to 25 ft = 12/3
AWG; 25 to 50 ft = 10/3 AWG. Use only extension cords that are intended for outdoor use. These extension cords are identified by the marking “Acceptable for use with outdoor appliances; store indoors while not in use.”
Use only extension cords having an electrical rating not less than the rating of the product.
Do not use damaged extension cords.
Examine extension cord before using and replace if damaged. Do not abuse extension cord and do not yank on any cord to disconnect. Keep cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord. If you are using an extension cord, it should always be completely unwound from the cable drum.
Grounding Instructions
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for
electric current to reduce the risk of electric 3 shock. This product is equipped with a cord
having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER- Improper connection of the equipment-grounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the product - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Do not use any type of adapter with this product.
Caution
• Follow the maintenance instructions specified in the manual.
• This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
IMPORTANT PRECAUTIONS – continued
Water Supply (Cold Water Only)
•Water hose must be at least 1/2 inch or 5/8 inch in diameter.
•Flow rate of water supply must not fall below 2 GPM (gallons per minute).
•Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
•The water supply temperature must not exceed 104°F/40°C.
•Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
NOTE: Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.
•Always prevent debris from being drawn into the unit by using a clean water source and an accessory water filter if required.
•Save these instructions!
ASSEMBLY INSTRUCTIONS
4 Step 1
Insert wheels into side holes at the bottom of the pressure washer and snap into place.
Step 2
Place the wheel carriage onto the mounting brackets on the sides of the washer and align the four holes.
Snap into place.
Step 3
Slide the handle into the top slot of the wheel carriage and snap into place.
Step 4
Slide the trigger gun holder into track on the right hand side of the pressure washer.
Step 5
Pull out the locking slide from the right side of the trigger gun handle, and insert the small end of the high pressure hose into place. Push the locking slide back into the trigger gun to lock the hose in position.
Loading...