Karcher G 2301 LT, G 2300 LT, K 2301 User Manual

0 (0)

Models G 2300 LT, G 2301 LT and

Model K 2301 Part No. 1.133-213.0

High Pressure Washer Operator Manual

Overview . . . . . . . . . . . . . . . . . . . . . .1

Precautions . . . . . . . . . . . . . . . . . . .1-2

Assembly Instructions . . . . . . . . . . . .3

Operating Instructions . . . . . . . . . . . .4

Using the Accessories . . . . . . . . . . . .5

Working with Detergents . . . . . . . . . . .6

Shut Down and Clean-Up . . . . . . . . . .7

Taking a Break . . . . . . . . . . . . . . . . . .7

Winterizing and Long-Term Storage . .7

Cleaning Tips . . . . . . . . . . . . . . . . .8-9

Optional Cleaning Accessories . . . . . .9

Trouble Shooting . . . . . . . . . . . . .10-11

In USA Call:

1-800-537-4129 or visit our website: www.karcher-usa.com

Specification

Engine

6.0 HP Tecumseh

Operating pressure

2300 PSI

Water volume

2.2 GPM

Maximum water

 

inlet temperature

104° Fahrenheit

MODEL K 2301 OVERVIEW (also G 2300 LT, G 2301 LT)

9

 

8

 

7

 

 

 

 

 

16

5

10

 

12

13

1

14

1

15

Never point nozzle at people or animals.

Never drink alcohol or use drugs while operating this equipment.

Never

spray electrical connections, electrical outlets

.

 

add fuel with the engine running or operate where

has been spilled.

Never

 

touch hot surfaces or allow accessories to contact hot surfaces.

Never

 

operate in an enclosed space, exhaust fumes

.

Never

 

operate near utilities with open flames.

 

Never

 

 

operate without the water turned on and never

hot water.

Never

IMPORTANT PRECAUTIONS – Read First!

Safety Warnings

When using this product basic precautions should always be followed:

Read all the instructions before using the product.

FIRE HAZARD! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead move the machine to a different location and avoid creating sparks.

Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.

High pressure jets can be dangerous

if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.

Wear safety goggles.

Do not use acids, solvents, or any other flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.

The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children.

Do not allow the high pressure hose to come into contact with the muffler guard.

Do not leave the machine running unattended.

Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.

Stay alert — watch what you are doing.

Do not operate the product when fatigued or under the influence of alcohol or drugs.

Do not stand on unstable surfaces. Stand with both feet balanced at all times.

The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the “on” position.

Water Supply

(Cold Water Only)

Water hose must be at least 3/4 inch in diameter.

Flow rate of water supply must not fall below 2.5 GPM (gallons per minute).

Flow rate can be determined by running the water for one minute into an empty 5-gallon container.

The water supply temperature must not exceed 104°F/40°C.

Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.

Always prevent debris from being drawn into the unit by using a clean water source.

We strongly recommend that this high pres-

 

sure washer not be left running for periods

 

of 5 minutes or longer without the trigger

 

gun being engaged.

 

This Kärcher high pressure washer is

 

2

equipped with thermal protection to extend

 

the life of your pressure washer. The thermal

 

protector will automatically activate at a pre-

 

determined high temperature ejecting hot

 

water before resetting. This ensures that the

 

pump does not become damaged.

 

Caution

Follow the maintenance instructions specified in the manual.

This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.

Karcher G 2301 LT, G 2300 LT, K 2301 User Manual

ASSEMBLY INSTRUCTIONS

Step 1 Slide the handle through

Step 2 Attach the gun/hose

the accessory rack.

storage handle.

3

Step 3 Check oil level. Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades).

Step 4 Insert the detergent tray into the tray slot and screw in the fastener. Fill the detergent container with the proper detergent for you cleaning project. Note: Place the container on the tray.

Important! Do not run the engine with a high or low oil level as this can cause engine damage. If you have further questions regarding the engine, please refer to the engine’s operating manual included with the unit.

You are now ready to operate your Kärcher Pressure Washer

OPERATING INSTRUCTIONS

NOTE: Engines controls shown may appear different.

Step 1 Connect the high pressure hose

Step 2 Connect garden

to the unit’s high pressure outlet.

hose to unit’s water inlet.

4

garden

Step 4 Trigger the gun to eliminate trapped air, wait

source

for a steady

spray noz-

completely.

zle.

 

Step 6 Push primer ball three times.

Wait 3 seconds between each push.

Note: in cold weather push 5 times.

Step 5 Fill gas tank with unleaded gasoline. Do not use leaded gasoline.

Loading...
+ 4 hidden pages