Karcher K 1800 IB User Manual

0 (0)
Table of Contents
Overview . . . . . . . . . . . . . . . . . . . . . .1 Precautions . . . . . . . . . . . . . . . . . . .1-2 Assembly Instructions . . . . . . . . . . . . .3 Operating Instructions . . . . . . . . . . . . .4 Using the Accessories . . . . . . . . . . . .5 Working with Detergents . . . . . . . . . . .6 Shut Down and Clean-Up . . . . . . . . . .7 Taking a Break . . . . . . . . . . . . . . . . . .7 Winterizing and Long-Ter m Storage . .7 Cleaning Tips . . . . . . . . . . . . . . . . .8-9 Optional Cleaning Accessories . . . . . .9 Trouble Shooting . . . . . . . . . . . . .10-11
Model K 1800 IB Part No.1.133-121 Model K 2200 IB Part No.1.133-211
High Pressure Washer Operator Manual
Specification
Model K 1800 IB
Operating pressure 1800 PSI Water volume 2.0 GPM Engine 4.0 HP Briggs & Stratton Quattro
Model K 2200 IB
Operating pressure 2200 PSI Water volume 2.2 GPM Engine 6.0 HP Briggs & Stratton Quantum
Manual Part No.9.139-111
Item Description
1. Water inlet
2. Detergent suction tube
3. Oil fill cap
4. Knob Assembly (two each): Hex Head Screw Serrated Washer Knob
5. High pressure hose
6. Detergent filter
7. Handle
8. Trigger gun safety lock
9. Trigger gun
10. Pull start
11. Gas tank
12. Var io spray wand
13. High pressure outlet
14. Accessory rack
15. Manual
16. 4 screws for accessory rack (not pictured)
1
NEVER!
MODEL K 1800 IB/2200 IB OVERVIEW
Never point nozzle at people or animals. Never drink alcohol or use drugs while operating this equipment. Never
spray electrical connections, electrical outlets or fixtures.
Never add
fuel with the engine running or operate where fuel has been spilled.
Never
touch hot surfaces or allow accessories to contact hot surfaces.
Never
operate in an enclosed space, exhaust fumes are dangerous.
Never
operate near utilities with open flames.
Never
operate without the water turned on and never use hot water.
9 8
3
2
11
4
5
10
12
1
7 6
13
14
14
NOTE: Engines controls shown may appear different.
2
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
When using this product basic precautions should always be followed:
• Read all the instructions before using the product.
• FIRE HAZARD! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead move the machine to a different location and avoid creating sparks.
• Operate and fuel machine in a well venti­lated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.
• High pressure jets can be dangerous if subject to misuse.The jet must not be directed at persons, animals, electrical devices, or the machine itself.
• Wear safety goggles.
• Do not use acids, solvents, or any other flammable material in this product.These products can cause physical injuries to the operator and irreversible damage to the machine.
• The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children.
• Do not allow the high pressure hose to come into contact with the muffler guard.
• Do not leave the machine running unattended.
• Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.
• Stay alert — watch what you are doing.
• Do not operate the product when fatigued or under the influence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with both feet balanced at all times.
• The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.
Water Supply (Cold Water Only)
• Water hose must be at least 3/4 inch in diameter.
• Flow rate of water supply must not fall below 2.5 GPM (gallons per minute).
• Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
• The water supply temperature must not exceed 104°F/40°C.
• Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
• Always prevent debris from being drawn into the unit by using a clean water source.
We strongly recommend that this high pres­sure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged.
This Kärcher high pressure washer is equipped with thermal protection to extend the life of your pressure washer.The ther mal protector will automatically activate at a pre­determined high temperature ejecting hot water before resetting.This ensures that the pump does not become damaged.
Caution
• Follow the maintenance instructions specified in the manual.
• This machine has been designed for use with cleaning detergent supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
You are now ready to operate your Karcher Pressure Washer.
3
ASSEMBLY INSTRUCTIONS
Step1
Slide the handle through the
accessory rack.
Step3
Check oil level.Oil level should always be between the “FULL” and “ADD” marks on the dipstick. Be sure the machine is level when checking the oil level. (Refer to the engine’s operating manual for seasonal grades.)
Step4
Insert the detergent tray into one of the slots of your choice and screw in the fastener.Fill with the proper detergent for your cleaning project.
Important!
Do not run the engine with a high or low oil level as this can cause engine damage.I f you h ave further questions regarding the engine, please refer to the engine’s operating manual included with the unit.
Step5
Fill gas tank with unleaded
gasoline. Do not use leaded gasoline.
Step2
Align the holes of the accessory
rack to the handle and fasten the four (4) screws.
Loading...
+ 8 hidden pages