Model G 2400 HH
Model K 2400 HH
Model K 2400 HB
Model HD 2500 HK
Part No. 1.194-301
Part No. 1.194-302
Part No. 1.194-303
Part No. 1.194-115
High Pressure Washer Operator Manual
. . . . . . . . . . .1
. . . . . . . . . .1-2
. . . . . . . . . . .3
. . . . . . . . . . .4
. . . . . . . . . . .5
. . . . . . . . . . .6
. . . . . . . . . . .7
. . . . . . . . . . .7 Storage . . . .7
. . . . . . . . . .8-9
. . . . . . . .9
. . . . . . . .10-11
Specifications
Model K 2400 HH / G 2400 HH
Operating pressure 2400 PSI
Water volume 2.5 GPM
Engine 5.0 HP Honda GC 160
Model K 2400 HB
Operating pressure 2400 PSI
Water volume 2.5 GPM
Engine 5.5 HP Briggs & Stratton
Model K 2500 HK
Operating pressure 2500 PSI
Water volume 2.5 GPM
Engine 6.0 HP Kohler Command
In USA Call:
1-800-537-4129 or visit our website: www.karcher-usa.com
Manual Part No. 9.139-106
Model K 2400 HH,HB/2500HK OVERVIEW
NOTE: Engines controls shown may appear different.
Item Description
1.High pressure outlet
2.Water inlet with garden hose connector and filter
3.Detergent suction tube
4. Knob Assembly (two |
Bolt & Knob) |
5.High pressure hose
6.Detergent filter
7. Handle |
6 |
8.Trigger gun
9.Trigger gun safety lock
10. Pull start (not
11. Gas tank (not
12.Oil fill cap (not
13.Spray wand
14.Dirtblaster® nozzle
15.Gun/hose storage
18
17.Operator manuals
18.Detergent tray
(optional)
3
1
17
7
8
|
9 |
11 |
15 |
14
5
10
13
2
16
Never |
point nozzle at people or animals. |
|
|
drink alcohol or use drugs while operating this equipment. |
|
Never |
||
|
spray electrical connections, electrical outlets or |
|
Never |
|
|
|
add fuel with the engine running or operate where |
has been spilled. |
Never |
||
|
touch hot surfaces or allow accessories to contact |
surfaces. |
Never |
||
|
operate in an enclosed space, exhaust fumes are dangerous. |
|
Never |
||
|
operate near utilities with open flames. |
|
Never |
|
|
|
operate pressure washer without the water turned |
|
Never |
|
|
|
use hot water. |
|
Never |
|
IMPORTANT PRECAUTIONS – Read First!
Safety Warnings
When using this product, basic precautions should always be followed:
•Read all the instructions before using the product.
•Fire hazard! Do not add fuel with the engine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks.
•Operate and fuel machine in a well ventilated area, free of devices featuring an open pilot or flame such as boilers, water heaters, etc.
•High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals,
electrical devices, or the machine itself.
•Wear safety goggles.
•Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
•The machine has hot surfaces which can cause burns. Operate the unit in a safe environment and away from children.
•Do not allow the high pressure hose to come into contact with the muffler guard.
•Do not leave the machine running unattended.
•Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with the controls.
•Stay alert — watch what you are doing.
•Do not operate the product when fatigued or under the influence of alcohol or drugs.
•Do not stand on unstable surfaces. Stand with both feet balanced at all times.
•Avoid tipping the machine on its side.
•The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position.
Water Supply
(Cold Water Only)
•Water hose must be at least 3/4 inch in diameter.
•Flow rate of water supply must not fall below 2.5 GPM (gallons per minute).
•Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
•The water supply temperature must not exceed 104°F/40°C.
•Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
•Always prevent debris from being drawn into the unit by using a clean water source.
We strongly recommend that this high pressure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged.
This Kärcher high pressure washer is |
2 |
|
|
equipped with thermal protection to extend |
|
the life of your pressure washer. The |
|
thermal protector will automatically |
|
activate at a predetermined high |
|
temperature ejecting hot water before |
|
resetting. This ensures that the pump does |
|
not become damaged. |
|
Caution
•Follow the maintenance instructions specified in the manual.
•This machine has been designed for use with cleaning detergents supplied or recommended by
the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
ASSEMBLY INSTRUCTIONS
Step 1 Attach the handle to the frame of the pressure washer. Align holes, insert bolts, and tighten with knobs.
Step 2 Attach the gun/hose storage handle.
3
Step 3 Attach the wand |
|
Step 4 Attach the |
|
Step 5 Attach the high |
to the spray gun. |
|
triple jet nozzle. |
|
pressure hose to the spray |
|
|
|
|
gun. |
|
|
|
|
|
|
|
|
|
|
Step 6 Connect the high pressure hose to the unit’s high pressure outlet.
Step 7 Connect the garden hose to unit’s water inlet.
Step 8 Attach the detergent tray.
(optional, not on G2400 HH)