Kambrook KIR795 User Manual

0 (0)

Kambrook - Australia

Kambrook - New Zealand

Ground Floor, Suite 2, 170-180

Private Bag 94411

Bourke Rd

Botany, Manukau

Alexandria NSW 2015, Australia

Auckland 2163

 

New Zealand

Locked Bag 2000

Customer Service Line/

Botany NSW 1455

Spare Parts 0800 273 845

Customer Service Line 1300 139 798

Customer Service Fax 0800 288 513

Customer Service Fax 1800 621 337

www.kambrook.co.nz

www.kambrook.com.au

 

Due to continual improvement in design or otherwise, the product

 

you purchase may differ slightly from the illustration in this book.

Issue A16

Kambrook KIR795 User Manual

 

 

 

INSTRUCTION BOOKLET

Suits all KIR795 models

Important

Please retain your instruction book for future use.

In the event that you need some assistance with your Kambrook appliance, please contact our Customer Service Department on 1300 139 798 (Australia) or 0800 273845 (New Zealand). Alternatively, visit us on our website at www.kambrook.com.au or www.kambrook.co.nz

As part of our commitment to the environment, and as members of the Australian Packaging Covenant, we have reduced the size of our instruction manuals on this product.

If you are finding it difficult to read this manual, you can download a PDF version from our website, www.kambrook.com.au.

2

Contents

Kambrook Recommends

p4

Safety First

 

Your Kambrook Steamline

 

Detach Steam Iron

p7

Using Your Kambrook Iron

p8

Care, Cleaning and Storage

p14

3

Kambrook Recommends Safety First

IMPORTANT: Please retain your instruction book for future use.

At Kambrook, we believe that safe performance is the first priority in any consumer product, so that you, our valued customer can confidently use and trust our products. We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions.

Important Safeguards For Your Kambrook

Steamline Detach Steam Iron

Carefully read all instructions before operating the iron for the first time and save for future reference.

Remove and safely discard any packaging material and promotional labels before using the iron for the first time.

To eliminate a choking hazard for young children, remove and safely discard the protective cover fitted to the power plug of this iron.

When unpacking the iron, check to see you have received all the items listed in the parts list, before discarding the packaging.

Always ensure the iron is properly assembled before use. Follow the instructions provided in this book.

Do not touch hot surfaces. High temperatures are generated during use, which could cause burns. Always use the handle and warn others (especially children) of the possible dangers of burns from steam, hot water or hot soleplate, especially when ironing vertically.

Do not use outdoors or in bathrooms.

Always test the iron on a small discreet part of the fabric to be ironed to ensure the iron has reached its optimum temperature.

Never use the vertical steam shot while clothes are on the body or direct the steam towards people.

Do not place the iron near the edge of a bench or table during operation. Ensure that the surface is level,

clean and free of water and other substances.

Do not operate the iron on a sink drain board.

Auto-off safety protection is designed as a safety feature only. The iron should not be left on deliberately while unattended. If the safety auto-off has activated and no further ironing is required, we recommended that the iron is switched off at the power outlet and unplugged.

Do not allow the cord to touch hot surfaces.

The iron must be used and rested on a stable surface.

4

Always set the temperature control dial to MIN, switch the iron off and remove the plug from the power outlet when filling the water tank. Do not touch the hot surface of the soleplate or the skirt area above the

soleplate at any time; especially when the water tank is not attached.

Only push the self-clean lever when you want to activate the self-cleaning function. Do not push this lever whilst ironing. Boiling water and steam will drip from the holes on the soleplate during the cleaning process. Due caution and attention should be exercised.

If the iron is set to a low temperature on the temperature control (i.e. synthetic or silk) and also on any of the steam control settings, there may be leakage from the soleplate. This is due to the iron temperature not being high enough to vaporize the water and create steam. Therefore, ensure that the steam control is always set

to correspond with the setting on the temperature control as seen in Table A under ‘Setting the Temperature’ on page 10.

Always turn the variable temperature control dial to minimum, switch off at the power outlet and then unplug the iron when not in use.

When placing the iron on its heel, ensure that the surface on which the heel is placed is stable.

If the iron is not used for an extended period, disconnect the iron from the power outlet.

Do not use the iron if it has been dropped, if there are visible signs of damage or if it is leaking.

Always switch the iron off and then unplug from the power outlet:

-Before filling or emptying the water tank.

-Before leaving the iron unattended.

-Before cleaning and maintenance, unless otherwise specified in this booklet.

-Immediately after use.

The iron incorporates a thermal safety fuse to protect it from overheating. However, the iron should not be left unattended while it is connected to the power outlet. Special care should always be taken when there are children in the home/ vicinity of the iron.

Allow the iron to cool completely before storing in an upright position on its heel.

Do not leave the iron unattended while in use, connected or on an ironing board.

Store the iron out of reach of children.

Do not allow the iron to lay flat on the soleplate when stored as residual water may seep through the steam holes, if the tank is not empty.

Always store the iron in the upright position on its heel.

Do not store the iron with water in the water tank. Always empty the tank after use.

Ensure the iron is cool before storing or wrapping the cord around the storage heel facility.

To prevent damage to the iron do not use alkaline cleaning agents when cleaning, uses a soft cloth and mild detergent.

Regularly inspect the supply cord, plug and actual appliance for any damage. If damage is found in any way, or the iron has been dropped, immediately cease use of the appliance and return the entire appliance to your nearest authorized Kambrook Service Centre for examination, replacement or repair.

5

Loading...
+ 12 hidden pages