Food Processor
Deluxe
|
D |
O |
|
O |
|
G |
|
E
U LAV
N |
|
A |
|
M |
|
|
E |
|
G |
|
O |
O |
|
D |
|
KFP90 |
Issue 2/04 |
|
|
KAMBROOK SAFETY
Welcome to Kambrook and your new Food Processor Deluxe.
At Kambrook we believe that the safe performance of our products is the first priority in any consumer product so that you, our valued customer, can confidently use and trust our products.
We ask that any electrical appliance you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions:
READ ALL INSTRUCTIONS THOROUGHLY BEFORE ACTIVATING THE APPLIANCE AND RETAIN THEM FOR FUTURE REFERENCE.
Ensure that the power source to be used is the same as the voltage requirements of the product.
Switch off then unplug from the power outlet when not in use and before cleaning.
Never immerse the power cord, plug or blender/processor body in any form of liquid.
Place the appliance on a dry, level surface.
Blades must be handled carefully as they are sharp!
Care is needed when handling the processor blade and all slicing, grating and chipping blades.
Ensure the blender/processor lid is securely locked in place before operating.
Before using the processor ensure that the blender drive cover is in place.
Do not remove blender jug or processing bowl from the motor base whilst blender/processor is in operation.
Do not place your hands or utensils in the blender jug or processing bowl while the blender/processor is operating.
Do not place hands in the blender jug or processor bowl unless the unit is switched off and then disconnected from the power outlet.
Switch off the power supply and then unplug the unit from the power outlet before removing any parts including blades, bowl/jug, lids.
Before attaching or detaching any parts ensure that the power supply is turned off and the power plug disconnected from the power supply.
Do not use this blender/processor for anything other than food or beverage preparation.
Do not blend a dry, thick or heavy mixture for more than 60 seconds without turning the blender/food processor off and stirring the ingredients before continuing to blend.
Do not use the processor and blender at the same time.
Do not process boiling liquids, let cool before placing into blender jug or processing bowl.
Make sure the motor and blade have completely stopped before disassembling.
2
The appliance is not intended for use by young children or infirmed persons without supervision.
Close supervision is required at all times when operating the appliance near children.
Young children should be supervised to ensure that they do not play with the appliance
Do not let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted.
Do not place on or near a hot gas burner, electric element, or in a heated oven.
Do not leave this appliance unattended while in use.
This appliance is suitable for domestic use only. Do not use this appliance for anything other than its intended use.
Do not use outdoors.
Regularly inspect the power cord, plug and actual appliance for any damage. If found damaged in any way, immediately cease use of the appliance and return the entire appliance to the nearest authorised Kambrook Service Centre for examination, replacement or repair.
Please call 1800 800 634 for Service Centre details in Australia.
3
Features of your Kambrook Food Processor Deluxe
1.Power control dial – a choice of 3 speeds plus pulse for complete processing/blending control
2.Motor base - 650 watts of processing/blending power
3.Blender jug – 1.5 litre capacity, ideal for mixing liquids (this must be correctly locked into the blender drive or the blender will NOT operate)
4.Blender jug lid – ensure this is correctly in position before activating.
5.Blender jug filler cap – for adding ingredients whilst blending
6.Blender drive cover – this must be correctly in place before using the processor, otherwise the processor will NOT operate (see following instructions)
7.Processor bowl - extra large 1.5 litre capacity for grating/slicing vegetables, processing foods, mixing doughs etc
8.Processing lid and feed chute – (Processor lid must be fitted correctly or the processor will NOT operate)
9.Automatic safety cut out – prevents the Food Processor Deluxe from operating unless the processor bowl and lid, blender jug or blender drive cover are correctly engaged on the motor base (not shown)
10.Food pusher with removable inner 80ml Measuring Cup – fits the into the food chute for safe adding of foods onto the blades and prevents
splashing when using the processing blade
11.Stainless steel thin slicing disc – for slicing vegetables and fruits
12.Stainless steel thick slicing disc – for slicing vegetables, chicken, meat and salami
13.Stainless steel fine grating disc – for grating chocolate and hard cheeses such as Parmesan
14.Stainless steel coarse grating disc – for grating firm cheeses, fruit and vegetables
15.Stainless steel chipping disc – for french fries. Also handy for stir fried vegetables
16.Stainless steel processing blade – use for all chopping, mixing and processing tasks
17.Mixing blade – use for making dough for pastry or bread
18.Disc holder – processing discs simply lock into place
19.Unique storage holder – conveniently and safely stores attachments on top of lid
20.Processing blade protective cover – for storage when blade is not in use.
21.Processor drive shaft
22.Spatula
23.Non-skid suction feet – for stability
24.Cord storage (not shown)
Blades must be handled carefully as they are sharp!
4
10
|
6 |
|
5 |
4 |
1 |
7 |
|
|
2 |
8
21
3
14
18 |
|
|
|
19 |
|
|
16 |
17 |
|
|
15 |
12 |
20 |
|
13 |
22 |
|
||
|
|
|||
|
|
|
11 |
|
|
|
23 |
|
|
5
USING YOUR KAMBROOK FOOD PROCESSOR DELUXE
Before first use remove any promotional labels and wash the blender jug, food processor bowl and all blades in warm, soapy water. Dry thoroughly.
All blades must be handled carefully as they are sharp!
Place the motor base on a level, flat surface.
ASSEMBLY AND OPERATION OF THE FOOD PROCESSOR
Your Food Processor Deluxe features 3 safety locking devices.
NOTE:THE FOOD PROCESSOR WILL NOT WORK UNLESS ALL OF THE BELOW ARE IN PLACE:
1.The blender drive cover is correctly LOCKED into position-
2.The processor bowl is correctly LOCKED into position
3.The processor lid is correctly LOCKED into position
NOTE: Always ensure that the Food Processor Deluxe is disconnected from the power outlet and operating dial is turned to ‘0’ before assembling or disassembling the Food Processor Deluxe.
Correct locking procedure of the Blender Drive Cover
Place cover over drive with the arrow 
on the drive cover aligned to the align arrow 
on the motor cover.Turn clockwise until the arrow on the drive cover is aligned with lock arrow 
on the motor cover.
Note the food processor will not operate unless the blender drive cover is locked in the correct position
Correct placement of the
Processor Bowl
Place the empty bowl onto the base, with the handle on your right align the arrow 
on the processor bowl handle with the align arow 
on the motor base.Turn the bowl clockwise until the arrow on the processor bowl handle is aligned with the 'lock' indicator arrow 
on the motor base.
6
USING THE PROCESSING |
Push down |
|||
BLADE/DISCS |
||||
|
||||
All blades must be handled carefully |
|
|||
as they are sharp! |
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Using the processing/mixing blade
a.Select either the processing or plastic mixing blade
b.Place the processing /mixing blade over the drive shaft and push down.
Using the slicing/grating discs.
a.Select the desired slicing/grating disc and assemble into the disc holder.To fit the stainless steel disc onto disc holder, fit left side of disc (when writing is towards you), with locating tab into holder, then push right side down firmly until it locks into place. Fit the end without the push up marking in first.Then push the “push up” side down firmly until it locks into place.
Locate tab
b.To remove disc, hold disk away and place thumbs underneath disc at top of disc marked “push up” and push out.The disc may be tight for the first few times.
Correct placement of the processor lid
Place the lid on top of the bowl, align the indicator line on the lid with the circle 
on the bowl.
7
Turn the lid clockwise – moving the ‘lid locking tab’ into the slot near the top of the motor unit - until the indicator line on the lid is aligned with the circle 
on the top of the bowl.
A “click” sound will be heard, to indicate is correctly fitted.
NOTE:The Food Processor Deluxe will not operate unless the processing bowl, lid and blender drive cover are correctly locked into position.
Insert
slot
Lid locking tab
Ensure the speed dial is in the Off (0) position.
Plug into a 230/240 volt power outlet. Turn power on.
The processor is now ready to use.
To begin processing/slicing/grating turn the ‘Power Control Dial’ from the Off (0) position to either the Low (1), Medium (2) or High (3) speed, depending your requirements.The speed can be changed at any time during the process.
For short bursts of power, whilst processing, use the “PULSE” setting.
For slicing and grating – ensure that the food items you want to slice or grate are of a suitable size to be feed through the food chute.
Place the food inside chute and push down with the ‘food pusher’.
NOTE! : Never push down any foods with your hands and do not put your hands down the food chute at any time during processing.
For using the processing blade: – with the ingredients inside the processor bowl, start the unit on low speed (1) moving to higher speeds (2 or 3) if necessary. Before commencing ensure that the ‘food pusher’ is in place to avoid splashing from the food chute. Ingredients can be added through the food chute whilst processing.
If ingredients stick to the sides of the processor bowl during processing, turn the speed to the Off (0) position, switch off at the power outlet, remove lid and then push the food back onto the blades using the plastic spatula to scrape down the sides of the bowl.Then recommence processing.
NOTE: Do not over fill the processor bowl past the MAX line for solids and past the 750ml mark for liquids. For greater quantities of liquids the blender jug should be used.
8
When processing is complete, turn to the Off (0) position.Wait until blades have stopped rotating before removing the lid, blades or processor bowl.
ASSEMBLY AND OPERARTION OF THE BLENDER
Your Food Processor Deluxe blender features 2 safety locking devices.
NOTE: the blender will not operate unless:
1.The blender jug is correctly positioned and LOCKED onto the motor base
2.The processor bowl AND lid are correctly locked into place (refer to previous instructions)
NOTE:The food processor will not operate while the blender jug is assembled to base. If processing is required, remove the blender and fit the Blender Drive Cover.
Correct placement of the blender jug
Unlock and remove the blender drive cover.
Align the arrow 
on the lower edge of the blender jug with the align handle arrow 
on the motor cover.Turn the blender jug clockwise until the arrow on the blender is aligned with the lock handle arrow 
on the motor cover, a “click” sound will be heard.
Ensure the speed dial is in the Off (0) position.
Plug into a 230/240 volt power outlet. Turn power on.
The blender is now ready to use.
Place ingredients into the jug. Note do not overfill the jug (ie/ above the MAX mark).
Firmly fit the lid to the top of the blender. Ensuring that the ‘filler cap’ (inside the lid) is correctly locked into position.
With your hand on top of the blender lid initially, turn the ‘Power Control Dial’ from the Off (0) position to either the Low (1), Medium (2) or High (3) speed, depending your requirements.The speed can be changed at any time during blending.
9
Loading...