JVC VN-C2U User Manual

0 (0)
JVC VN-C2U User Manual

V.NETWORKS

VN-C2U

This instruction manual is printed on

INSTRUCTIONS recycled paper.

Thank you for purchasing the JVC VN-C1U.

To gain maximum benefit from this product, read this instruction manual carefully before use and retain it for future reference.

The serial number is very important for maintaining quality of your product. At the time of purchase, check to see that the serial number is correctly printed on the top of the unit and that the serial numbers on the unit and warranty match.

For Customer Use:

Enter below the Model No. and Serial No. which are located on the rear of the cabinet. Retain this information for future reference.

Model No.

Serial No.

SS961423-002

PORTABLE CART WARNING (symbol provided by RETAC)
S3126A

IMPORTANT SAFEGUARDS

1.Read all of these instructions.

2.Save these instructions for later use.

3.All warnings on the product and in the operating instructions should be adhered to.

4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.Do not use this appliance near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

7. Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or adult, and

serious damage to the appliance. Use only with a cart or stand recommended

by the manufacturer, or sold with the appliance. Wall or shelf mounting should follow

the manufacturer's instructions, and should use a mounting kit approved by the manu-

facturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

8.Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. This appliance should never be placed near or over a radiator or heat register. This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.

10.This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

12.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.

13.Follow all warnings and instructions marked on the appliance.

14.Do not overload wall outlets and extension cords as this can result in fire or electric shock.

15.Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

16.Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the appliance.

c.If the appliance has been exposed to rain or water.

d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e.If the appliance has been dropped or the cabinet has been damaged.

f.When the appliance exhibits a distinct change in performance – this indicates a need for service.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Japan

PORTABLE CART WARNING (symbol provided by RETAC)
S3126A

IMPORTANT SAFEGUARDS

1.Read all of these instructions.

2.Save these instructions for later use.

3.All warnings on the product and in the operating instructions should be adhered to.

4.Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

5.Do not use attachments not recommended by the appliance manufacturer as they may cause hazards.

6.Do not use this appliance near water – for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc.

7. Do not place this appliance on an unstable cart, stand, or table. The appliance may fall, causing serious injury to a child or adult, and

serious damage to the appliance. Use only with a cart or stand recommended

by the manufacturer, or sold with the appliance. Wall or shelf mounting should follow

the manufacturer's instructions, and should use a mounting kit approved by the manu-

facturer.

An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

8.Slots and openings in the cabinet and the back or bottom are provided for ventilation, and to insure reliable operation of the appliance and to protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the appliance on a bed, sofa, rug, or other similar surface. This appliance should never be placed near or over a radiator or heat register. This appliance should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.

9.This appliance should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. For appliance designed to operate from battery power, refer to the operating instructions.

10.This appliance system is equipped with a 3-wire grounding type plug (a plug having a third (grounding) pin). This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding plug.

11.For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it form the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

12.Do not allow anything to rest on the power cord. Do not locate this appliance where the cord will be abused by persons walking on it.

13.Follow all warnings and instructions marked on the appliance.

14.Do not overload wall outlets and extension cords as this can result in fire or electric shock.

15.Never push objects of any kind into this appliance through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the appliance.

16.Do not attempt to service this appliance yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17.Unplug this appliance from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power cord or plug is damaged or frayed.

b.If liquid has been spilled into the appliance.

c.If the appliance has been exposed to rain or water.

d.If the appliance does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to normal operation.

e.If the appliance has been dropped or the cabinet has been damaged.

f.When the appliance exhibits a distinct change in performance – this indicates a need for service.

18.When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

19.Upon completion of any service or repairs to this appliance, ask the service technician to perform routine safety checks to determine that the appliance is in safe operating condition.

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Japan

Package Contents

This product is packaged with the following items. Contact your dealer of purchase for any missing items.

VN-C2U main unit

VN-C2U controller CD-ROM

Ferrite core

Instruction manual (this document)

Operational Environment

The following environment is necessary for the operation of VN-C2U.

PC operating with Microsoft Windows 95,98 or NT

CPU

:

Pentium 133MHz or equivalent or higher

 

 

(200MHz or higher recommended)

Memory

:

32MB or more (64MB or more recommended)

Hard disk space

:

20MB or more

Display and video card :

640 X 480 pixels or higher; high color

 

 

(1024 X 768 pixels or higher; true color recommended)

10BASE-T

:

LAN board, connector cables

LAN environment

10BASE-T network cross-connected with HUB, etc. of IEEE802.3 standard.

It is also possible to connect your PC with VN-C2U directly (1:1) using a crossing cable (please check since some LAN boards do not allow use of cross cables).

1

Precautionary Notes

Avoid installing in the following locations:

Where the unit is exposed to rain or water

Where the ambient temperature exceeds the range of 0 C ~ +40 C (recommended)

Where there is vibration

Dusty areas or areas with oil or gas

The sensitivity will automatically increase when using this unit in a dark location with the AGC on (Full Auto on). At this time the ??screen may appear rough??; however this is not a malfunction.

When using Full Auto on for the white balance of this unit, the tint may appear slightly different from that of the actual color due to the principle of the automatic white balance tracking circuit; however, this is not a malfunction.

When shooting a highly bright object such as lamps, etc. white tails may appear above and below the object on the screen. This is an elemental characteristic seen when shooting solid objects referred to as the smearing effect, and is not a malfunction.

About Upgrades

Upgrades of the software (VN-C2U) can obtained via the Internet. The upgrade software can be downloaded from the following homepage:

http://www.jvc-victor.co.jp

2

Installation and Setup

Before starting installation and setup

Since a setup of one IP address is necessary for each VN-C2U, follow the procedure given below to setup each unit (the installation can be made at the same time if the power is left off.

1.Install VN-C2U

When installing in a location where it is difficult to turn the power on and off, install after completing steps 2 through 5.

2.Connect VN-C2U to a network

(turn the power of VN-C2U on)

3.Set the IP address of VN-C2U

Always contact the network management for the IP address of VN-C2U and use only that which is assigned or authorized.For setup of a second unit and following, reboot the PC and return to step 2.

4.Enable the set IP address of VN-C2U

(Turn the power of VN-C2U off once, then turn the power back on)

5.Register the connecting point

Register the IP address information of VN-C2U to the user PC.

Names of VN-C2U parts

 

 

DC input jack

Lens block

 

 

Lens cover

 

10BASE-T port

Front

Rear

Top

3

Installation and Setup

1. Installation

Install using the separately sold mounting kit (model no. VN-BK20).

Do not turn the power on or connect to a network until installation is completed.

Note

To prevent the unit from falling, mount only on areas with sufficient strength. VN-C2U can be installed as shown in the diagram below, or inverted. Do not install the unit sideways.

(1) Mount the bracket onto the ceiling, etc.

(2) Mount the cover on the bracket

(3) Mount VN-C2U on the bracket

4

Loading...
+ 21 hidden pages