JVC UX-P450 User Manual

5 (1)

®

English

MICRO COMPONENT SYSTEM

 

 

 

 

 

 

 

UX-P450—Consists of CA-UXP450 and SP-UXP450

— CA-UXP450 SP-UXP450

SUPER VIDEO

INSTRUCTIONS

GVT0129-008A [US/UN]

Warnings, Cautions and Others/

CAUTION—STANDBY/ON button!

Disconnect the mains plug to shut the power off completely (all lamps and indications go off). The STANDBY/ON button in any position does not disconnect the mains line.

When the unit is on standby, the STANDBY/ON lamp lights in red.

When the unit is turned on, the STANDBY/ON lamp lights in green.

The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

— STANDBY/ON !

STANDBY/ON

STANDBY/ON

STANDBY/ON

( )

于處理廢棄電池的有關法律或規定。

( )

IMPORTANT FOR LASER PRODUCTS

1.CLASS 1 LASER PRODUCT

2.CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.

3.CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

4.REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT.

3. 生可見或不可見的鐳射輻射。應避免受到鐳射光束的直接照 射。

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1.Front: No obstructions and open spacing.

2.Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3.Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

 

15 cm

 

 

15 cm

1 cm 15

1 cm

15 cm

15

1

1

15

10 cm

10

SP-UXP450 CA-UXP450 SP-UXP450

G-1

:

放置

2./ /

3.10

15 cm 15

15 cm

15

CA-UXP450

Contents

Introduction .....................................................

2

Precautions ......................................................................

2

How to Read This Manual...............................................

2

Getting Started.................................................

3

Step 1: Unpack ................................................................

3

Step 2: Prepare the Remote Control ................................

3

Step 3: Hook Up ..............................................................

4

Setting the Video Output Selector...................................

6

Changing the Scanning Mode .........................................

6

Before Operating the System..........................

7

Playable Disc Types ........................................................

7

Display Indicators............................................................

8

Daily Operations—Playback ........................

10

Listening to the Radio ...................................................

11

Playing Back a Tape......................................................

12

Playing Back a Disc.......................................................

12

Daily Operations—Sound & Other

 

Adjustments ...................................................

15

Adjusting the Volume....................................................

15

Adjusting the Sound ......................................................

15

Presetting Automatic DVD Video Sound

 

Increase Level............................................................

16

Changing the Display Brightness ..................................

16

Changing the Picture Tone ............................................

16

Setting the Clock ...........................................................

17

Turning Off the Power Automatically...........................

17

On-Screen Disc Operations ..........................

24

On-screen Bar Information............................................

24

Operations Using the On-screen Bar.............................

25

Selecting Browsable Still Pictures.................................

27

Operations on the CONTROL Screen...........................

27

Advanced Tape Operations ..........................

29

Recording on a Tape......................................................

29

Synchronized Disc Recording .......................................

30

Timer Operations ..........................................

31

Setting the Timer ...........................................................

31

Setup Menu Operations ................................

33

Operating Procedure......................................................

33

Restricting the Review—Parental Lock ........................

37

Additional Information.................................

39

Learning More about This System ................................

39

Maintenance ..................................................................

41

Troubleshooting.............................................................

42

Language Code List.......................................................

43

Country/Area Codes List...............................................

44

DVD OPTICAL DIGITAL OUT Signals .....................

45

Specifications ................................................................

46

Parts Index .....................................................................

46

Unique DVD/VCD Operations .....................

18

Selecting the View Angle..............................................

18

Selecting the Subtitle Language ....................................

18

Selecting the Audio Track .............................................

19

Playing Back a Bonus Group ........................................

19

Special Effect Playback.................................................

20

Advanced Disc Operations............................

21

Programming the Playing Order—Program Play..........

21

Playing at Random—Random Play...............................

22

Playing Repeatedly........................................................

23

Prohibiting Disc Ejection—Child Lock ........................

23

English

1

English

Introduction

Precautions

Installation

Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C.

Install the System in a location with adequate ventilation to prevent internal heat buildup inside the System.

DO NOT install the System in a location near heat sources, or in a place subject to direct sunlight, excessive dust or vibration.

Leave sufficient distance between the System and the TV.

Keep the speakers away from the TV to avoid interference with TV.

Power sources

When unplugging the System from the wall outlet, always pull on the plug, not the AC power cord.

DO NOT handle the AC power cord with wet hands.

Moisture condensation

Moisture may condense on the lenses inside the System in the following cases:

After starting to heat the room

In a damp room

If the System is brought directly from a cold to a warm place

Should this occur, the System may malfunction. In this case, leave the System turned on for a few hours until the moisture evaporates, unplug the AC power cord, then plug it in again.

Others

Should any metallic object or liquid fall into the System, unplug the AC power cord and consult your dealer before operating any further.

DO NOT disassemble the System since there are no user serviceable parts inside.

If you are not going to operate the System for an extended period of time, unplug the AC power cord from the wall outlet.

If anything goes wrong, unplug the AC power cord and consult your dealer.

How to Read This Manual

To make this manual as simple and easy-to-understand as possible, we have adapted the following methods:

Button and control operations are explained as listed in the table below.

Some related tips and notes are explained later in the sections “Additional Information” and “Troubleshooting,” but not in the same section explaining the operations. If you want to know more about the functions, or if you have a doubt about the functions, go to these sections and you will find the answers.

Indicates that you press the button briefly.

Indicates that you press the button briefly and repeatedly until an option you want is selected.

Indicates that you press one of the buttons.

2 sec.

Indicates that you press and hold the button for specified seconds.

The number inside the arrow indicates the period of press (in this example, 2 seconds).

If no number is inside the arrow, press and hold until the entire procedure is complete or until you get a result you want.

Indicates that you turn the control toward the specified direction(s).

Remote

Indicates that this operation is only

possible using the remote control.

ONLY

Indicates that this operation is only

Main Unit possible using the buttons and controls on

ONLY

the main unit.

2

Getting Started

Step 1:Unpack the package and check the accessories.

Step 1: Unpack

After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.

FM antenna (1)

AM loop antenna (1)

Composite video cord (1)

Remote control (1)

Batteries (2)

AC plug adaptor (1)

If any item is missing, consult your dealer immediately.

Step 2: Prepare the Remote Control

Insert the batteries into the remote control by matching the polarity (+ and –) correctly.

Step 2: Prepare the remote control.

1

 

English

2

R6(SUM-3)/AA(15F)

 

Step 3: Hook up the components such as AM/FM antennas, speakers, etc. (see pages 4 to 6).

Finally plug the AC power cord.

If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.

Now you can operate the System.

3

• DO NOT use an old battery together with a new one.

DO NOT use different types of batteries together.

DO NOT expose batteries to heat or flame.

DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.

3

English

Step 3: Hook Up

If you need more detailed information, see page 6.

Illustrations of the input/output terminals below are typical examples.

When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary.

Turn the power off to all components before connections.

For better FM/AM reception

AM loop antenna

Keep it connected.

Outdoor FM antenna

(not supplied)

Before connecting optical digital cord

Remove the protective cap from the DVD OPTICAL DIGITAL OUT terminal.

Vinyl-covered wire (not supplied)

Extend it horizontally.

Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector.

TV

DECODER

AUX

VCR, etc.

VIDEO INPUT

Yellow

 

 

OR

VIDEO INPUT

 

 

OR

VIDEO INPUT

 

Y

 

PB

Green

PR

Blue

 

Red

AV

 

COMPU LINK

 

OPTICAL

 

DIGITAL IN

 

AUDIO OUT

White

LEFT

RIGHT

Red

Composite video cord (supplied)

S-video cord (not supplied)

Component video cord (not supplied)

AV COMPU LINK cord (not supplied) (cord with monaural mini plug)

For details, see “AV COMPU LINK remote control system” on page 6.

Optical digital cord (not supplied)

Audio cord (not supplied)

4

JVC UX-P450 User Manual

English

AM loop antenna (supplied)

Turn it until the best reception is obtained.

Before plugging in the System

Set the correct voltage for your area with the voltage selector on the rear.

Use a screwdriver to rotate the voltage selector so that the voltage marker is pointing at the same voltage as where you are plugging in the unit. (See also the back cover page.)

FM antenna (supplied)

Extend it so that you can obtain the best reception.

Voltage marker

VIDEO OUT

VIDEO

OUT

SELECT

PAL

NTSC

Y

REVERSE

AUTO

 

VIDEO

S-VIDEO

PB

PR

DO NOT plug in before setting the voltage selector and all connection procedures are complete.

To a wall outlet

Plug the AC power cord only after all connections and selector settings on the rear are complete.

5

English

To connect the AM loop antenna

1 Hold

3 Release

2Insert

If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl.

Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

To connect the speaker cords

Connect the right speaker to the RIGHT terminals, and the left speaker to the LEFT terminals.

1 Hold

3 Release

2Insert

When connecting the speaker cords, match the polarity of the speaker terminals: Red cord to (+) and black cord

to (–).

• DO NOT connect more than one speaker to each terminal.

DO NOT allow the conductor of the speaker cords to be in touch with the metallic parts of the System.

IMPORTANT

The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.

• When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

AV COMPU LINK remote control system

This system allows you to use JVC’s TV with simple operations; by starting playing back a disc, the TV automatically turns on and changes the input mode to the appropriate position so that you can view the playback picture.

To use AV COMPU LINK, you need to connect the System and the TV by using a cord with monaural miniplugs (not supplied) in addition to the video input/output connection through the COMPONENT jacks, S-VIDEO jack or VIDEO (composite) jack on the rear.

Setting the Video Output Selector

You can select the video output to match it to the color system of your TV.

VIDEO

NTSC: For an NTSC TV.

OUT PAL: For a PAL TV.

SELECT

 

 

 

• When using a multi-color system

 

 

PAL

TV, either position will work.

 

 

 

 

 

NTSC

 

 

 

 

Changing the Scanning Mode

Remote

ONLY

This System supports progressive scanning.

If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting “PROGRE.”

PROGRESSIVE

0 PROGRE INTER

(at the same time)

PROGRE Progressive scanning. For a progressive TV.

INTER Interlaced scanning. For a conventional TV.

6

Before Operating the System

Playable Disc Types

This unit has been designed to play back the following discs:

 

 

Video

Region

Disc Type

Mark (Logo)

Code*

Format

 

 

Number

 

 

 

DVD Video

 

 

3

 

 

 

 

 

 

or

DVD Audio

 

 

ALL

 

NTSC

 

 

 

 

Video CD

 

or

 

 

PAL

 

(VCD)

DIGITAL VIDEO

 

 

 

 

 

 

Super Video

 

 

 

CD (SVCD)

SUPER VIDEO

 

 

Audio CD

COMPACT

 

 

 

 

 

 

DIGITAL AUDIO

 

 

CD-R

The System can play back CD-R or CD-RW

 

recorded in the Audio CD, Video CD, SVCD,

CD-RW

MP3, WMA, and JPEG formats.

 

 

 

DVD-R

The System can play back DVD-R or DVD-

 

RW recorded in the video format.

DVD-RW

In addition to the above discs, this System can play back audio data recorded on CD Text, CD-G (CD Graphics), and CD-Extra.

The following discs cannot be played back:

DVD-ROM, DVD-RAM, DVD+R, DVD+RW, CD-I (CD-I Ready), CD-ROM, Photo CD, etc.

Playing back these discs will generate noise and damage the speakers.

In this manual, “file” and “track” are interchangeably used for MP3/WMA/JPEG operations.

* Note on Region Code

DVD players and DVDs have their own Region Code numbers. This System can play back only DVDs recorded with the NTSC or PAL color system whose Region Code numbers including “3.”

EX.:

If a DVD with the improper Region Code numbers is loaded, “RGN ERR (Region Code Error)” appears on the display and playback will not start.

DVD Video—digital audio formats

The System can play back the following digital audio formats.

Linear PCM: Uncompressed digital audio, the same format used for CDs and most studio masters.

Dolby Digital: Compressed digital audio, developed by Dolby Laboratories, which enables multi-channel encode to create the realistic surround sound.

DTS (Digital Theater Systems): Compressed digital audio, developed by Digital Theater Systems, Inc., which enables multi-channel like Dolby Digital. As the compression ratio is lower than for Dolby Digital, it provides wider dynamic range and better separation.

When playing a multi-channel encoded DVD, the System properly converts these multi-channel signals into 2 channels, and emits the downmixed sound from the speakers.

To enjoy the powerful sound of these multi-channel encoded DVDs, connect a proper decoder or an amplifier with a proper built-in decoder to the digital output terminal on the rear.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS2.0+DIGITAL OUT” are registered trademarks of Digital Theater Systems, Inc.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

English

7

English

Display Indicators

The indications on the display teach you a lot of things while you are operating the System.

Before operating the System, be familiar with when and how the indicator illuminates on the display.

1 2 3

4

5

6

7

SLEEP MONO ST MP3 WMA 3DPHONIC REC 123 REC

RANDOM

 

PRGM

ALL BONUS B.S.P.

A.STANDBY

8 9 p q w

e

1Rhythm Ax indicator

Lights when Rhythm Ax is activated. 2Daily Timer indicators

: lights when Daily Timer stands by or is being preset.

1/2/3: lights when a Daily Timer (1, 2, or 3) stands by; flashes while setting or working.

REC: lights when the Recording Timer stands by; flashes while setting or working.

3SLEEP indicator

Lights when the Sleep Timer is activated. 4FM reception indicators

MONO: lights while receiving an FM stereo station in monaural.

ST (stereo): lights while an FM stereo station with sufficient signal strength is tuned in.

5MP3/WMA indicators

MP3: lights when an MP3 track is detected.

WMA: lights when a WMA track is detected. 63D PHONIC indicator

Lights when 3D Phonic is activated.

7REC indicator

Lights while recording. 8Tape operation indicators

2 3 (tape direction):

Lights to indicate the current tape running direction.

Flashes slowly during playback and recording.

Flashes quickly while rewinding a tape.

(reverse mode):

– : tape play continues endlessly.

: tape automatically reverses once.

: tape play stops at the end of one side. 9Disc operation indicators

RANDOM: lights when Random Play is activated.

PRGM (program): lights when Program Play is activated.

(repeat)/ALL:

ALL : lights when Disc Repeat is activated.

– : lights when any Repeat other than the above is activated.

pBONUS indicator

Lights when a DVD Audio with a bonus group is detected.

qB.S.P. (Browsable Still Picture) indicator

Lights when Browsable Still Pictures are detected while playing a DVD Audio.

wMain display

While listening to radio: Band (or preset number) and station frequency appear.

While selecting “AUX”: “AUX” appears.

While playing a tape: “TAPE” appears.

While playing a disc: See “Indications on the main display while operating a disc” on page 9.

eA(auto). STANDBY indicator

Lights when Auto Standby is activated.

Flashes when disc playback stops with Auto Standby activated.

8

Indications on the main display while operating a disc

While playing back a disc:

While disc play is stopped:

 

 

 

 

 

 

• DVD Video:

• DVD Video:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current chapter no.

Elapsed playing time

Total title no.

 

 

By pressing DISPLAY, you can show the current title and chapter numbers for a few seconds.

• DVD Audio:

• DVD Audio:

Track no.

Current track no.

Elapsed playing time

Total group no.

Group no.

By pressing DISPLAY, you can show the current group and track numbers for a few seconds.

• Audio CD:

 

 

 

 

• Audio CD:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current track no. Elapsed playing time

Total track no.

Total playing time

 

 

 

 

 

 

 

 

 

 

 

 

• SVCD/VCD:

• SVCD/VCD:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current track no.

Elapsed playing time*

 

 

Total track no.

Total playing time*

* “PBC” appears while playing a disc with PBC.

* Changes to “PBC” when stopping PBC playback.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• MP3/WMA:

 

 

 

 

• MP3/WMA:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current track no.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current track no.

Elapsed playing time

 

 

 

Current

 

group no.

 

 

 

 

 

 

 

 

• By pressing DISPLAY, you can show the current group

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and track numbers for a few seconds.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• JPEG:

 

 

 

 

• JPEG:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Current group no.

Current file no.

Current group no.

Current file no.

• If Resume is turned “ON” (see page 36), “RESUME” appears when you stop playback.

English

9

English

Daily Operations—Playback

 

1

10 keys

 

ENTER

SET

MENU

TOP MENU

 

, , ,

2

RETURN

 

8

7

 

1/¡

GROUP/TITLE

3D PHONIC

4/¢

3

SHIFT

1

STANDBY/ON

 

In this manual, the operation using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.

1 Turn on the power.

The STANDBY/ON lamp on the main unit lights in green.

Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step.

2 Select the source.

Playback automatically starts if the selected source is ready to start.

If you press AUX, start playback source on the external component.

3 Adjust the volume.

4Operate the target source as explained later.

To turn off (stand by) the unit

STANDBY/ON The STANDBY/ON lamp on the main unit

lights in red.

• A small amount of power is always consumed even while on standby.

2

DVD/CD

3

VOLUME

4

For private listening

Connect a pair of headphones to the PHONES jack on the main unit. The sound will no longer come out of the speakers. Be sure to turn down the volume before connecting or putting the headphones.

Disconnecting the headphones will activate the speakers again.

DO NOT turn off (stand by) the System with the volume set to an extremely high level; Otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the System or start playback.

10

Listening to the Radio

Main Unit

To set the AM tuner interval spacing ONLY

Before operating the tuner, it is required to select the appropriate AM space interval used for your area.

1 Select the AM band.

FM AM

2 Turn off the power.

STANDBY/ON

3Select the appropriate AM space interval for your area.

You can only use the button and the control on the front panel.

STANDBY/ON

DOWN

AM 9KHZ

(9 kHz interval)

While holding...

STANDBY/ON

UP

AM 10KHZ

(10 kHz interval)

While holding...

To select the band (FM or AM)

FM AM

To tune in to a station

While FM or AM is selected...

Remote control:

Main unit:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 sec.

 

 

 

 

 

 

 

 

 

 

 

 

 

2 sec.

 

 

 

 

 

 

 

 

 

 

 

 

GROUP/TITLE

 

 

DOWN

 

 

UP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.

When you repeatedly press the button, the frequency changes step by step.

To stop searching manually, press either button.

Remote

ONLY

If the received FM station is hard to listen

FM MODE

9

(at the same time)

The MONO indicator lights on the display. Reception will improve though stereo effect is lost—Monaural reception mode.

To restore the stereo effect, press the button again (the MONO indicator goes off).

To preset the stations

Remote

ONLY

 

You can preset 30 FM and 15 AM stations.

1Tune in to a station you want to preset.

You can also store the monaural reception mode for FM preset stations if selected.

2Activate the preset number entry mode.

SET

Finish the following process while the indication on the display is flashing.

English

11

English

3 Select a preset number for the station you store.

AUDIO

SUB TITLE

ANGLE

1

2

3

ZOOM

DVD LEVEL

VFP

4

5

6

REV.MODE

 

FM MODE

7

8

9

10

 

10

Examples:

To select preset number 5, press 5.

To select preset number 15, press +10, then 5.

To select preset number 30, press +10, +10, then 10.

• You can also use the ¡or 1buttons.

4 Store the station.

SET

Remote

To tune in to a preset station ONLY

1 Select the band (FM or AM).

FM AM

2 Select a preset number for the station you store.

AUDIO

SUB TITLE

ANGLE

• You can also use the ¡or

1

2

3

1buttons.

ZOOM

DVD LEVEL

VFP

 

4

5

6

 

REV.MODE

 

FM MODE

 

7

8

9

 

10

 

10

 

To start:

To stop:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To rewind tape:

Before or after play...

GROUP/TITLE

Rewind the tape to the right.

Rewind the tape to the left.

To change the tape running direction

3 (forward play)

2 (reverse play)

To reverse the tape automatically

REV. MODE

7

(at the same time)

Tape is played from the forward side to the reverse side. When the reverse side is played back, playback stops.

Tape is automatically reversed, and playback repeats until you stop it.

Tape will not be reversed. When the current side of the tape reaches its end, playback stops.

Playing Back a Tape

To insert a tape

You can play back tapes of types I, II, and IV.

Push

Insert

Close

With the tape side facing outside

Playing Back a Disc

IMPORTANT: Before playing a disc, make sure of the

following...

Turn on the TV and select an appropriate input mode on the TV to view the pictures or on-screen displays on the TV screen.

For disc playback, you can change the initial setting to your preference. See “Setup Menu Operations” on page 33.

If “” appears on the TV screen when you press a button, the disc cannot accept the operation you have tried to do, or data required for that operation is not recorded on the disc.

12

Before operating a disc, be familiar how a disc is recorded.

DVD Video comprises of “Titles” which includes “Chapters,” DVD Audio/MP3/WMA/JPEG comprise of “Groups” which includes “Tracks,” and CD/SVCD/VCD comprise of only “Tracks.”

For JPEG playback, see “Operations on the CONTROL Screen” on page 27.

To insert a disc

You can insert a disc while playing another source.

On-screen guide icons

During DVD Video playback, the following icons may appear on the TV:

At the beginning of a scene containing multiangle views.

At the beginning of a scene containing multiaudio sounds.

At the beginning of a scene containing multisubtitles.

The following icons will be also shown on the TV to

indicate your current operation.

, , , , ,

To close the disc tray, press 0again.

If you press DVD/CD 3, disc tray closes automatically and playback starts (depending on how the disc is programmed internally).

To start:

To pause:

To stop:

 

 

 

 

 

 

 

 

 

 

DVD/CD

To release, press

DVD/CD 3.

While playing DVD/SVCD/VCD: This System can store the stop point, and when you start playback again by pressing DVD/CD 3(even while on standby), it starts from the position where you have stopped—Resume Play. (“RESUME” appears on the display when you stop playback.)

To stop completely while Resume is activated, press 7 twice. (To cancel Resume, see “RESUME” on page 36.)

When operating the System, the on-screen guide icon (see the following table) appears on the TV.

To deactivate the on-screen guide icons, see “ON SCREEN GUIDE” on page 36.

To select a title/group

Remote

ONLY

 

While playing...

 

GROUP/TITLE

(at the same time)

• Group name appears for MP3/WMA discs.

To select a chapter/track

While playing...

GROUP/TITLE

• First time you press 4, you

 

 

can go back to the beginning of

 

 

the current chapter/track.

 

To locate a particular portion

Remote

 

 

ONLY

 

 

 

 

 

While playing a disc except MP3/WMA...

 

 

SLOW SLOW+

 

 

 

 

 

 

x2

x5

x10

x20

x60

 

x2

x5

x10

x20

x60

No sound comes out while searching on DVD Video/ SVCD/VCD.

To return to normal playback, press DVD/CD 3.

English

13

English

To locate an item directly

Remote

ONLY

 

You can select a title/chapter/track directly and start playback.

For DVD Video, you can select a title before starting playback, while you can select a chapter after starting playback.

AUDIO

SUB TITLE

ANGLE

1

2

3

ZOOM

DVD LEVEL

VFP

4

5

6

REV. MODE

 

FM MODE

7

8

9

10

 

10

Examples:

To select number 5, press 5. To select number 15, press +10, then 5.

To select number 30, press +10, +10, then 10.

To use 3D Phonic

While playing...

3D

 

 

 

 

PHONIC

3D PHONIC

ACTION

3D PHONIC

DRAMA

 

 

3D PHONIC

OFF

3D PHONIC

THEATER

 

(Canceled)

 

 

• The selected mode can only be shown on the TV.

ACTION Suitable for action movies and sports programs.

DRAMA Creates natural and warm sound. Enjoy movies in a relaxed mood.

THEATER Enjoy sound effects like in a major theater.

Remote

ONLY

To play back using the disc menu

7For DVD Video/DVD Audio:

1 Show the disc menu.

TOP MENU

MENU

 

SET UP

2 Select an item on the disc menu.

ENTER

With some discs, you can also select items by entering the number using the 10 keys.

7For SVCD/VCD with PBC:

While playing a disc with PBC, “PBC” appears on the display.

When disc menu appears on the TV, select an item on the menu. Playback of the selected item starts.

AUDIO

SUB TITLE

ANGLE

1

2

3

ZOOM

DVD LEVEL

VFP

4

5

6

REV. MODE

 

FM MODE

7

8

9

10

 

10

Examples:

To select number 5, press 5. To select number 15, press +10, then 5.

To select number 30, press +10, +10, then 10.

To move to the next or previous page of the current menu:

GROUP/TITLE

Moves to the next page.

Moves to the previous page.

To return to the previous menu:

CANCEL

RETURN

(at the same time)

To cancel PBC

 

AUDIO

SUB TITLE

ANGLE

 

1

2

3

 

ZOOM

DVD LEVEL

VFP

 

4

5

6

 

REV. MODE

 

FM MODE

 

7

8

9

Stop playback.

 

 

Select a track.

10

 

10

Playback starts with the selected track.

To reactivate PBC, press 7(twice if Resume is turned “ON”), then press DVD/CD 3.

14

Daily Operations—Sound & Other Adjustments

Remote control

DVD LEVEL

VFP

 

SLEEP

CLOCK/

A.STANDBY

TIMER

SET

, , ,

ENTER

BASS/TREBLE

DISPLAY RHYTHM AX

DIMMER

VOLUME

SHIFT

+/–

 

FADE

MUTING

Main unit

RHYTHM AX

VOLUME +/–

Adjusting the Volume

You can adjust the volume level from level 0 (VOL MIN) to level 40 (VOL MAX).

Remote control:

Main unit:

 

 

 

VOLUME

VOLUME

 

 

 

 

 

 

Remote

To drop the volume in a moment

ONLY

 

FADE

To restore the volume, press again, or

MUTING

adjust the volume level.

 

Adjusting the Sound

To emphasize rhythm feeling—RHYTHM AX

This function emphasizes bass attack feeling, and also

changes the subwoofer level.

RHYTHM AX

RHYTHMAX OFF

 

(Canceled)

To adjust the tone

You can adjust the bass and treble level from –5 to +5.

To adjust the bass

BASS/

TREBLE BASS TRE

Canceled

VOLUME

To adjust the treble

BASS/

TREBLE BASS TRE

Canceled

VOLUME

English

15

English

Presetting Automatic DVD Video Sound

Increase Level

Remote

ONLY

The DVD Video sound is sometimes recorded at a lower level than for other discs and sources. You can set the increase level for the currently loaded DVD Video, so you do not have to adjust the volume every time you change the source.

DVD LEVEL

NORMAL MIDDLE

5

HIGH

(at the same time)

NORMAL Original recording level.

MIDDLE Output level is increased (less than “HIGH”).

HIGH Output level is increased (more than “MIDDLE”).

Once the current DVD is ejected, this setting is canceled and set automatically to “NORMAL.”

Changing the Display Brightness

Remote

ONLY

You can dim the display window.

 

 

DIMMER

DIM1

DIM2

 

 

 

 

DIM OFF

AUTO DIM

 

(Canceled)

 

 

DIM1

Dims the display.

 

 

DIM2

Erases the display illumination.

AUTO DIM Erases the display illumination when

 

disc playback starts.*

 

The display illuminates when playback stops.

*“AUTO DIM” does not work for CD/MP3/WMA.

Changing the Picture Tone

Remote

ONLY

While showing a playback picture on the TV, you can select the preset picture tone, or adjust it and store your own taste.

To select a preset picture tone

1 While playing, display VFP setting screen.

 

NORMAL

 

VFP

GAMMA

0

BRIGHTNESS

0

6

CONTRAST

0

 

SATURATION

0

 

TINT

0

 

SHARPNESS

0

(at the same time)

On the TV

2 Select a preset picture tone.

 

 

 

 

 

 

 

NORMAL

 

 

 

CINEMA

 

 

 

 

 

 

 

 

 

 

 

USER2

 

 

 

USER1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORMAL

Normally select this.

 

 

 

 

 

 

 

 

 

 

 

 

CINEMA

Suitable for a movie source.

 

 

 

 

 

 

 

 

 

USER1/USER2

You can adjust parameters and can

 

 

 

store the settings (see below).

To erase the screen, press VFP again while holding SHIFT.

To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained above.

2Select a parameter you want to adjust.

ENTER

GAMMA

Adjust if the neutral color is bright or

 

dark (–3 to +3).

 

 

BRIGHTNESS

Adjust if the entire picture is bright

 

or dark (–8 to +8).

 

 

CONTRAST

Adjust if the far and near positions

 

are unnatural (–7 to +7).

 

 

SATURATION

Adjust if the picture is whitish or

 

blackish (–7 to +7).

 

 

TINT

Adjust if the human skin color is

 

unnatural (–7 to +7).

 

 

SHARPNESS

Adjust if the picture is indistinct

 

(–8 to +8).

 

 

16

3 Adjust the parameter.

Turning Off the Power

 

ENTER

Automatically

Remote

ONLY

 

 

To turn off the unit after playback is over—Auto

Standby

4 Repeat steps 2 to 3 to adjust other parameters.

To erase the screen, press VFP again while holding SHIFT.

Setting the Clock

Remote

ONLY

Without setting the built-in clock, you cannot use Daily Timers, Recording Timer (see page 31) and Sleep Timer.

To correct a misentry during the process, press CANCEL or CLOCK/TIMER. You can return to the previous step.

1 Activate the clock setting mode.

CLOCK/

TIMER

SLEEP

On

A.STANDBY

Canceled

(at the same time)

When Auto Standby is in use, the A.STANDBY indicator lights on the display.

When disc play stops, the A.STANDBY indicator starts flashing. If no operation is done for about 3 minutes while the indicator is flashing, the System turns off (stands by) automatically.

Auto Standby does not work while you are listening to radio (FM/AM) and the external component (AUX).

If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected.

2 Adjust the hour.

SET

3 Adjust the minute.

SET

Now the built-in clock starts working.

To check the current clock time during play

DISPLAY

Clock

Source information

While playing a DVD and MP3/WMA, you cannot check the current clock time (see page 9) .

To turn off the unit after a certain period of time —Sleep Timer

1 Specify the time (in minutes).

SLEEP

10

20

30

60

90

120

150

A.STANDBY

 

Canceled

2 Wait until the set time goes off.

To check the time remaining until the shut-off time

SLEEP

SLEEP

A.STANDBY

 

If you press the button repeatedly, you can change the shutoff time.

English

17

English

Unique DVD/VCD Operations

Remote control

SUB TITLE

AUDIO ANGLE ZOOM 10 keys

, , ,

ENTER

DVD/CD 3

8 7

SLOW –/+

SHIFT

Selecting the View Angle

Remote

ONLY

While playing back a chapter (of DVD Video) containing multi-view angles, you can view the same scene from different angles.

You can also select the multi-view angles using the onscreen bar (see page 24).

While playing...

ANGLE

3

Ex.:

1/3

1

1/3

1

(at the same time)

2/3

2

2/3

2

3/3

3

3/3

3

Selecting the Subtitle Language

Remote

ONLY

For DVD Video: While playing back a chapter (of DVD Video) containing subtitles in different languages, you can select the subtitle language to display on the TV.

For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc.

You can also select the subtitle language using the onscreen bar (see page 24).

While playing a DVD Video...

1 Display the subtitle selection window.

SUB TITLE

1/3

1/3

ENGLISH

2

ENGLISH

 

 

 

(at the same time)

18

2 Select the subtitle language.

Ex.:

1/3

2/3

ENGLISH

FRENCH

1/3

2/3

ENGLISH

FRENCH

3/3

JAPANESE

3/3

JAPANESE

While playing a DVD Video...

Ex.:

1/3

2/3

ENGLISH

FRENCH

1/3

2/3

ENGLISH

FRENCH

3/3

JAPANESE

3/3

JAPANESE

While playing a DVD Audio...

Ex.:

1/3

2/3

3/3

1

2

3

While playing an SVCD video...

 

SUB TITLE

 

 

2

 

(at the same time)

 

–/4

1/4

2/4

OFF

1

2

4/4

3/4

 

4

3

 

Selecting the Audio Track

Remote

ONLY

For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to. For Karaoke SVCD/VCD: When playing back a track, you can select the audio channel to play.

You can also select the audio track using the on-screen bar (see page 24).

AUDIO

1

(at the same time)

While playing a Karaoke SVCD or VCD...

 

AUDIO

SVCD

 

 

 

ST1

ST2

L1

 

1

 

R2

L2

R1

 

 

VCD

 

 

 

 

ST

L

R

(at the same time)

 

 

 

ST1/ST2

To listen to normal stereo (2 channel)

 

ST

playback.

 

 

 

L1/L2/L To listen to the left audio channel.

R1/R2/R To listen to the right audio channel.

SVCD can have 4 audio channels. Karaoke SVCD usually uses these 4 channels to record two 2-channel recordings (ST1/ST2).

Playing Back a Bonus Group

Remote

ONLY

Some DVD Audios have a special group called “bonus group” whose contents are not open to the public.

To play back a bonus group, you have to enter the specific “key number” (a kind of password) for the bonus group. The way of getting the key number depends on the disc.

1 Select the bonus group.

The bonus group is usually recorded as the last group (for example, if a disc contains 4 groups including a bonus group, “group 4” is the bonus group).

For how to select the group, see “To select a title/group” on page 13.

English

19

English

2 Enter the key number.

AUDIO

SUB TITLE

ANGLE

1

2

3

ZOOM

DVD LEVEL

ENTER

VFP

4

5

6

REV. MODE

 

FM MODE

7

8

9

PROGRESSIVE

0

3 Follow the interactive instructions shown on the screen.

To cancel the key number entry, press 7.

Special Effect Playback

Remote

 

 

ONLY

 

 

Still picture playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To start still picture play-

To resume normal

back:

playback:

 

 

 

 

 

 

 

 

 

 

While playing...

 

 

 

 

 

 

 

DVD/CD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2 Select slow motion speed.

SLOW SLOW+

Forward slow motion starts.

Reverse slow motion* starts.

SLOW+

1/32 1/16 1/8 1/4 1/2

SLOW

 

 

1/32

 

 

 

1/16

 

 

 

1/8

 

 

 

1/4

 

 

 

1/2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Not available for SVCD/VCD.

To resume normal playback, press DVD/CD 3.

To replay the previous scenes (One-Touch Replay)

• This function is only used while playing DVD Video.

While playing back...

The playback position moves back about 10 seconds before the current position (only within the same title).

Frame-by-frame playback

1 While playing...

Still picture playback starts.

2 Advance the still picture frame by frame.

To resume normal playback, press DVD/CD 3.

Slow-motion playback

1 While playing...

Still picture playback starts.

Zoom

Remote

 

 

 

ONLY

 

 

 

1 While playing back...

 

 

 

 

 

 

ZOOM

 

 

 

4

 

 

(at the same time)

 

ZOOM

ZOOM 1

ZOOM 2

ZOOM 3

ZOOM 4

4

ZOOM OFF

ZOOM 6

ZOOM 5

 

2 Move the zoomed-in position.

To cancel Zoom, press ZOOM repeatedly (while holding SHIFT) until “ZOOM OFF” appears on the TV.

20

Advanced Disc Operations

Remote control

10 keys

 

,

ENTER

 

 

CANCEL

DVD/CD 3

7

8

PLAY

4/¢

MODE

 

REPEAT

SHIFT

REPEAT A-B

 

Main unit

DVD/CD 3

 

4, 7, ¢

0

Programming the Playing Order—

Program Play

Remote

ONLY

You can arrange the playing order of the chapters or tracks (up to 99) before you start playback.

1 Before starting playback, activate Program Play.

PLAY

 

MODE

PROGRAM RANDOM

 

Canceled

PRGM

On the display

PROGRAM

 

 

No

Group/Title

Track/Chapter

1

 

 

2

 

 

3

 

 

4

 

 

5

 

 

6

 

 

7

 

 

8

 

 

9

 

 

10

 

 

USE NUMERIC KEYS TO PROGRAM TRACKS.

USE CANCEL TO DELETE THE PROGRAM.

On the TV

2 Select chapters or tracks you want for Program Play.

• For DVD/MP3/WMA:

1Select a title or group number. 2 Select a chapter or track number. 3 Repeat the above steps 1 and 2.

• For SVCD/VCD/CD:

1Select tracks.

To enter the numbers directly:

AUDIO

SUB TITLE

ANGLE

Examples:

To enter number 5, press 5.

1

2

3

To enter number 15, press +10,

ZOOM

DVD LEVEL

VFP

then 5.

4

5

6

REV. MODE

 

FM MODE

To enter number 30, press +10,

7

8

9

+10, then 10.

10

 

10

 

English

21

English

3 Start playback.

 

 

 

 

DVD/CD

Playback starts in the order you

 

have programmed.

 

To skip a step:

To pause:

To stop:

 

 

 

 

 

 

 

 

 

 

GROUP/TITLE

To release, press

DVD/CD 3.

To check the programmed contents

Before or after playback...

In the reverse order.

In the programmed order.

You can also use 4or ¢to check the programmed contents.

To modify the program

Before or after playback...

To erase the last step:

To erase the entire

 

program:

 

 

 

 

 

 

 

 

CANCEL

RETURN

To add steps in the program:

Repeat step 2.

To exit from Program Play

Before or after playback...

PLAY

 

MODE

PROGRAM RANDOM

 

Canceled

Playing at Random—Random Play

Remote

ONLY

You can play all chapters or tracks at random.

• Random Play cannot be used for some DVDs.

1 Before starting playback, activate Random Play.

PLAY

 

 

MODE

PROGRAM

RANDOM

 

Canceled

RANDOM

 

 

2 Start playback.

 

 

DVD/CD

Playback starts in random order.

Random Play ends when the

 

entire disc has been played.

To skip a chapter/

To pause:

To stop:

track:

 

 

To release, press

DVD/CD 3.

To exit from Random Play

Before or after playback...

PLAY

 

MODE

PROGRAM RANDOM

 

Canceled

22

Playing Repeatedly

Remote

ONLY

You can also select the repeat mode using the on-screen bar (see page 25).

Repeat Play

You can repeat playback.

• For DVD Video:

While playing...

REPEAT A-B

REP CHAP* REP TTL

REPEAT

REP OFF

(Canceled)

• For DVD Audio:

While playing or before playback...

REPEAT A-B

REP TRK* REP GRP

REPEAT

REP OFF

(Canceled)

• For MP3/WMA:

While playing or before playback...

REPEAT A-B

REP TRK *

 

REPEAT

REP GRP

 

REP OFF

REP ALL

 

(Canceled)

 

• For CD/SVCD/VCD:

While playing (without PBC for SVCD/VCD) or before playback...

REPEAT A-B

REP TRK *

 

REPEAT

REP ALL

REP OFF

(Canceled)

REP CHAP* Repeats the current chapter.

REP TTL Repeats the current title.

REP TRK* Repeats the current track.

REP GRP Repeats the current group.

REP ALL Repeats the disc or program.

*During Program Play and Random Play, “REP STEP” appears instead of these indications, and repeat modes change as follows for all the discs.

REP STEP REP ALL

REP OFF

(Canceled)

A-B Repeat

English

 

You can repeat playback of a desired portion by specifying the beginning (point A) and the ending (point B).

A-B Repeat cannot be used for MP3/WMA and for some DVDs.

A-B Repeat can be used within the same title while playing a DVD Video, and within the same track for the other discs.

1 While playing (without PBC for SVCD/VCD), select the start point (A).

 

starts flashing on the

REPEAT A-B display.

REPEAT

 

appears on the TV

A-

if the TV is turned on.

(at the same time)

2 Select the end point (B).

REPEAT A-B

REPEAT

(at the same time)

stops flashing.

A-B appears on the TV.

You can search for the end point using the ¡button.

To cancel A-B Repeat, press REPEAT A-B again while holding SHIFT.

A-B Repeat will also be canceled when you stop play or skip the chapter or track.

Main Unit

Prohibiting Disc Ejection—Child Lock

ONLY

You can lock the disc tray so that no one can eject the loaded disc.

• This is possible while the System is on standby.

While the disc tray is closed...

(at the same time)

To cancel the prohibition, repeat the same procedure. “UNLOCKED” appears on the display.

23

English

On-Screen Disc Operations

Remote control

ZOOM

10 keys

 

, ,

,

 

 

 

 

ENTER

 

 

 

 

 

ON SCREEN

 

 

 

 

CANCEL

DVD/CD 3

 

 

 

 

7

 

8

 

 

 

 

REPEAT

4/¢

 

 

 

 

¡

SHIFT

 

 

 

 

 

On-screen bars

 

 

 

 

 

DVD Video

 

 

 

 

 

1

 

 

2

 

 

3

DVD-VIDEO 8.5Mbps

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

DVD Audio

4

 

 

 

 

 

 

 

 

 

1

 

 

 

 

2

3

DVD-AUDIO

GROUP 14

TRACK 23 TIME

0:00:58

TIME

OFF

TRACK

1/

3

PAGE 1/ 3

 

SVCD

 

4

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

2

3

SVCD

 

TITLE 14

CHAPTRACK233 TOTALTIME 1:2500:58

TIMEE

OFFF

ST11/3

-/1/34

1/3

1/3

VCD

4

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

2

3

VCD

 

TITLE 14

CHAPTRACK233 TOTALTIME 1:2500:58

TIMEE

OFFF

ST1/3

 

 

1/3

1/3

CD

4

 

 

 

 

 

 

 

 

 

 

 

1

 

 

 

 

2

3

CD

 

TITLE 14

CHAPTRACK233 TOTALTIME 1:2500:58

TIMEE

OFFF

 

1/3

1/3

1/3

 

4

 

 

 

 

 

24

 

 

 

 

 

 

On-screen Bar Information

You can check the disc information (except for MP3/WMA/ JPEG disc) and use some functions through the on-screen bar.

1 Disc type

2 Playback information

Indication

Meanings

Mbps

Current transfer rate

 

 

 

 

 

 

 

 

 

 

(Megabits per second)

 

 

 

 

 

 

 

 

 

 

 

 

TITLE 2

 

 

 

 

Current title

 

 

 

 

 

 

 

 

 

Current chapter

 

CHAP 3

 

 

 

 

 

 

 

 

 

 

 

 

 

GROUP 1

 

 

Current group

 

 

 

 

 

 

 

 

 

TRACK 14

 

Current track

 

 

 

 

 

 

 

Time indications

 

TOTAL 1:25:58

3 Operation modes

Indication

Meanings

 

 

 

 

 

 

 

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Forward/Reverse search

 

 

 

 

 

 

 

 

 

 

 

/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Forward/Reverse slow-motion

 

 

 

 

 

 

 

 

 

 

 

/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Pause

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Stop

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4 Function icons (on the pull-down menu)

Indication

TIME

OFF

CHAP.

TRACK

1/3

1/3

1/3

Meanings

Select to change the time indication.

Select to repeat playback.

Select for time search.

Select for chapter search.

Select for track search.

Select to change the audio language or channel (see also page 19).

Select to change subtitle language (see also page 18).

Select to change the view angle (see also page 18).

PAGE 1 / 5 Select to change the page.

Operations Using the On-screen Bar

Remote

ONLY

Ex.: Selecting a subtitle (French) for DVD Video

While a disc is selected as the source...

1 Display the on-screen bar with the pull-down menu.

ON SCREEN

DVD-VIDEO

8.5Mbps

 

TITLE

2

CHAP 3

TIME

0:00:58

DVD-VIDEO

8.5Mbps

 

TITLETITLE14

2CHAP233

TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

Goes off

2 Select (highlight) the item you want.

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

3 Display the pop-up window.

ENTER

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

11/3 11/3 1/3

ENGLISH

4 Select the desired option in the pop-up window.

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

5 Finish the setting.

ENTER

11/3 21/3 1/3

FRENCH

Pop-up window goes off.

To erase the on-screen bar

ON SCREEN

For detailed operations of the following functions, see also “Operations Using the On-screen Bar” on the left.

To change the time information

You can change the time information in the on-screen bar and the display window on the main unit.

1While playing, display the on-screen bar with the pulldown menu.

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

2 Make sure TIME is selected (highlighted).

3 Change the time indication.

ENTER

TIME 0:00:58 REM 0:11:23

T.REM 0:35:24 TOTAL 1:01:58

TIME Elapsed playing time of the current chapter/track.

REM Remaining time of the current chapter/ track.

TOTAL Elapsed disc time.

T.REM Remaining disc time.

To erase the on-screen bar

ON SCREEN

Repeat Play

• See also page 23.

1While playing a disc (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu.

Except for DVD Video: Repeat Play can be selected before starting playback.

2Select OFF .

3Display the pop-up window.

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

OFF

English

25

English

4 Select the repeat mode you want.

A-B

Repeats a desired portion (see below).

TITLE

Repeats the current title.

 

 

GROUP

Repeats the current group.

 

 

ALL

Repeats the disc (except for DVD) or

 

program.

 

CHAPTER* Repeats the current chapter.

 

 

TRACK*

Repeats the current track.

 

 

OFF

Cancels Repeat Play.

*During Program Play and Random Play, “STEP” appears.

5 Finish the setting.

ENTER

A-B Repeat

• See also page 23.

1While playing, display the on-screen bar with the pulldown menu.

2Select OFF .

3Display the pop-up window.

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

OFF

4 Select “A-B.”

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

A–B

5 Select the start point (A).

ENTER

DVD-VIDEO

8.5Mbps

 

TITLETITLE14 2CH

TIMEE

A-

CHAP.

11/3

6 Select the end point (B).

ENTER

A-B Repeat starts. The selected

portion plays repeatedly.

 

Before pressing ENTER, you can search for the end point using the ¡button.

To cancel A-B Repeat, repeat steps 1 to 3, and select “OFF” in step 4.

Time Search

You can move to a particular point by specifying the elapsed playing time from the beginning.

1While playing (without PBC for SVCD/VCD), display the on-screen bar with the pull-down menu.

Except for DVD: Time Search can be used before starting playback.

2Select .

3Display the pop-up window.

DVD-VIDEO 8.5Mbps TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

 

TIME

_ : _ _ : _ _

 

 

 

4Enter the time.

You can specify the time in hours/minutes/seconds.

AUDIO

SUB TITLE

ANGLE

Examples:

1

2

3

To move to a point of 1

ZOOM

DVD LEVEL

VFP

(hours): 02 (minutes): 00

4

5

6

(seconds), press 1, 0, 2, 0, then

REV. MODE

 

FM MODE

 

0.

7

8

9

 

 

PROGRESSIVE

 

To move to a point of 54

0(minutes): 00 (seconds), press 0, 5, 4, 0, then 0.

It is always required to enter the hour digit (even “0” hour), but it is not required to enter trailing zeros (the last two digits in the examples above).

To correct a misentry, press Cursor < to erase the last entry.

5 Finish the setting.

ENTER

The System starts playing the disc

from the selected playing time.

 

Chapter/Track Search

You can search for the chapter (DVD Video) or track (DVD Audio) number to play.

1While playing, display the on-screen bar with the pulldown menu.

2 Select CHAP. or TRACK .

3 Display the pop-up window.

DVD-VIDEO 8.5Mbps TITLETITLE14 2CHAP233 TOTALTIME 1:25:0:00:58

TIMEE

OFFF

CHAP.

11/3

11/3

1/3

 

 

CHAPTER

_

 

 

26

4 Enter the desired chapter/track number.

AUDIO

SUB TITLE

ANGLE

1

2

3

ZOOM

DVD LEVEL

VFP

4

5

6

REV. MODE

 

FM MODE

7

8

9

PROGRESSIVE

0

Examples:

To select chapter/track 5, press 5.

To select chapter/track 15, press 1, then 5.

To select chapter/track 30, press 3, then 0.

To correct a misentry, press the 10 keys until the desired number shown in the pop-up window.

5 Finish the setting.

ENTER

The System starts playing the

searched chapter or track.

 

Selecting Browsable Still Pictures

Remote

ONLY

While playing back a track (of DVD Audio) linked to browsable still pictures (BSP), you can select the still picture (turn the page) to be shown on the TV.

If a track is linked to browsable still pictures (BSP), they are usually shown in turn automatically during playback.

1While playing a DVD Audio, display the on-screen bar with the pull-down menu.

2 Select PAGE 1 / 5 .

3 Display the pop-up window.

DVD-AUDIO

 

 

GROUP 14 TRACK 23 TIME 0:00:58

TIME

OFF

TRACK

1/ 3 PAGE 1/ 5

1

4 Select a still picture you want.

DVD-AUDIO

 

 

GROUP 14 TRACK 23 TIME 0:00:58

TIME

OFF

TRACK

1/ 3 PAGE 3/ 5

3

5 Finish the setting.

ENTER

Operations on the CONTROL Screen

Remote

ONLY

The CONTROL screen automatically appears on the TV when you load an MP3, WMA, or JPEG disc.

You can search for and play the desired tracks through the CONTROL screen.

If both types of files (MP3/WMA files and JPEG files) are recorded on a disc, select the file type to play (see page 35).

CONTROL screen

Ex.: When the MP3 disc is loaded.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

1

 

 

 

 

 

 

 

 

 

 

REPEAT TRACK Time : 00:00:14

 

 

8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

 

 

 

 

 

Group : 2 / 3

 

 

Track : 5 / 14 (Total 41)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

Spring

 

 

Cloudy.mp3

 

 

 

 

 

 

 

 

Summer

 

 

Fair.mp3

 

 

 

 

 

 

 

 

 

 

 

Fall

 

 

 

 

Fog.mp3

 

 

 

 

 

 

3

 

 

 

 

Winter

 

 

 

Hail.mp3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Indian summer.mp3

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Track Information

 

 

Rain.mp3

 

 

 

 

 

 

 

 

 

 

Title

 

 

Shower.mp3

 

 

 

 

 

-

 

 

 

 

 

Rain

 

 

Snow.mp3

 

 

 

 

 

4

 

Artist

 

 

Thunder.mp3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Typhoon.mp3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Album

 

 

Wind.mp3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Winter sky.mp3

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Current group number/total group number

2 Current group (in blue)

3 Group list

4 Track information (ID3 Tag Version 1.0: only for MP3/WMA)

5 Current track (in blue)

6 Repeat Play setting

7 Elapsed playing time of the current track (only for MP3/WMA)

8 Operation mode icon

9 Current track number/total number of tracks in the current group (total number of tracks on the loaded disc)

0Highlight (green) bar

-Track list

English

27

English

To move the highlight (green) bar between group list and track list:

Moves the bar to the track list.

Moves the bar to the group list.

To select a group/track in the list:

Move the highlight bar to a desired item.

If you move the highlight bar while playing back an MP3/

WMA disc, the selected track starts playback automatically.

To start playback

For MP3/WMA:

ENTER

Playback starts with the selected

track.

 

 

• Pressing DVD/CD 3also starts

 

playback.

For JPEG:

 

 

 

 

 

The selected track (still picture)

 

 

ENTER

 

 

 

 

is displayed until you change it.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Slide-show playback starts.

 

 

 

 

 

 

 

DVD/CD

 

Each track (still picture) is

 

 

 

 

 

shown on the screen for about 3

 

 

 

 

 

seconds, then changes one after

 

 

 

 

 

another.

 

 

 

 

 

 

 

 

 

 

 

Once you start playing back a JPEG track, the CONTROL screen goes off.

To cancel slide-show, and display the current still picture, press 8.

To skip a track:

To stop playback:

GROUP/TITLE

To repeat slide-show for JPEG

While playing or before starting playback...

REPEAT A-B

 

REPEAT

REP GRP REP ALL

 

REP OFF

(Canceled)

REP GRP Repeats the current group.

REP ALL Repeats the disc.

• For Repeat Play of MP3/WMA, see page 23.

To zoom in the still picture

• You cannot zoom in the still picture during slide-show.

1 While playing back a still picture...

During slide-show, press 8to display the still picture, then...

 

ZOOM

 

4

(at the same time)

ZOOM

ZOOM 2

ZOOM 1

4

ZOOM OFF

2 Move the zoomed-in position.

To cancel Zoom, press ZOOM repeatedly (while holding SHIFT) until “ZOOM OFF” appears on the TV.

28

Loading...
+ 168 hidden pages