Files for TM-A170G
Size:
406.39 Kb
Download

TM-A170G

OPERATING INSTRUCTIONS

COLOR VIDEO MONITOR

BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITORMANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI INSTRUCCIONES : MONITOR DE VIDEO A COLOR

!"#$%&'(&)

TM-A170G

For Customer Use:

Enter below the Serial No. which is located on the rear of the cabinet.

Retain this information for future reference.

Pour l’usage du client:

Enter ci-dessousle numéro de série qui est situé sur l’arrière du coffret. Conserver cette information pour une référence ultérieure.

Model No. :

TM-A170G

Numéro de modèle :

Serial No. :

 

Numéro de série :

 

ENGLISH

INSTRUCTIONS

DEUTSCH

ITALIANO FRANÇAIS

 

 

 

 

 

 

 

ESPAÑOL

 

CHROMA

CONTRAST

VOLUME/SELECT

MENU

A

B

POWER

TM-A170

PHASE

BRIGHT

 

 

INPUT SELECT

 

 

 

 

 

 

 

 

 

LCT1266-001A-H

Jul. 2002 No.52059

2-1

SAFETY PRECAUTIONS

In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions.

WARNINGS

To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor,

consult qualified service personnel. Never try to service it yourself.

WARNING : THIS APPARATUS MUST BE EARTHED.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB(A) according to ISO 7779.

Improper operations, in particular alternation of high voltage or changing the type of tube may result in x-rayemission of considerable dose. A unit altered in such a

way no longer meets the standards of certification, and must therefore no longer be operated.

This monitor is equipped with a 3-bladegrounding-type

plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.

FCC INFORMATION (U.S.A. only)

CAUTION : Changes or modification not approved by JVC could void the user's authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Notice (U.S.A. only)

 

 

This product utilizes both a Cathode Ray Tube (CRT) and

 

 

other components that contain lead. Disposal of these

 

 

materials may be regulated in your community due to

 

 

environmental considerations. For disposal or recycling

 

 

information please contact your local authorities, or the

 

 

Electronics Industries Alliance: <http://

www

.eiae.org.>

PRECAUTIONS

Use only the power source specified on the unit. (120 V AC/230 V AC, 50 Hz/60Hz)

When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet.

Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do not overload wall outlets or power cords as this can result in a fire or electric shock.

Avoid using this unit under the following conditions:

in extremely hot, cold or humid places,

in dusty places,

near appliances generating strong magnetic fields,

in places subject to direct sunlight,

in badly ventilated places,

in automobiles with doors closed.

Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.

When dust accumulates on the screen surface, clean it with a soft cloth.

Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:

–whenthe power cord is frayed or the plug is damaged,

–ifliquid has been spilled into the unit,

–ifthe unit has been dropped or the cabinet has been damaged,

–whenthe unit exhibits a distinct change in performance.

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualified service personnel.

When replacement parts are required, have the service personnel verify in writing that the replacement parts he/she uses have the same safety characteristics as the original parts. Use of manufacturer’s specified replacement parts

can prevent fire, shock, or other hazards.

Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety

check described in the manufacturer’s service literature.

When this unit reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask qualified service personnel to dispose of this unit.

POWER CONNECTION

The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.

Power cord

Power supply voltage

: AC 120 V

AC 230 V

AC 230 V

Countries

: U.S.A. and Canada

European countries

United Kingdom

Warning:

Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock or fire.

Note for the United Kingdom power cord only

The plug on the United Kingdom power cord has a built-infuse. When replacing the fuse, be sure to use only a correctly rated approved type,re-fitthe fuse cover.

(Consult your dealer or qualified service personnel.)

How to replace the fuse

Open the fuse compartment with the blade screw driver, and

replace the fuse.

(* An example is shown in the illustration.)

Fuse

SCREEN BURN

It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-raytube. This problem does

not occur as far as displaying normal video playback motion images.

Supplementary Explanation

= Information for monitor operation =

This monitor uses a high precision CRT (cathode ray tube). Please follow the procedures below.

*For stable operation of the CRT, approximately 30 minutes running time is required from the time the power is turned on.

*When the monitor is installed, it can be easily affected by surrounding magnetic fields, which can generate irregular color on the screen. When it is difficult to eradicate, degauss from outside using a degausser, etc.

CONTENTS

 

SAFETY PRECAUTIONS .................................................................................

2

CONTROLS AND FEATURES ..........................................................................

4

HOW TO HANDLE BASIC OPERATIONS .......................................................

7

HOW TO USE THE MENU FUNCTIONS..........................................................

8

HOW TO INITIALIZE THE SETTING ...............................................................

11

BASIC CONNECTION EXAMPLE ..................................................................

12

HOW TO USE EXTERNAL CONTROL ..........................................................

14

TROUBLESHOOTING ....................................................................................

15

SPECIFICATIONS ..........................................................................................

16

ENGLISH

A170G-TM

2

3

CONTROLS AND FEATURES

FRONT VIEW

<Front Panel>

 

 

9

CHROMA

CONTRAST VOLUME/SELECT

 

 

MENU

A

B

 

POWER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

50C

PHASE

BRIGHT

 

 

 

INPUT SELECT

 

 

 

 

 

 

1

2

3

 

4

5

6

7

8

1 Chroma/Phase button

 

 

 

 

 

 

6 Input B (VIDEO Y/C) button [INPUT SELECT B]

 

 

[ CHROMA/

PHASE]

 

 

 

 

Selects the video and audio signals input to the VIDEO B

 

 

Press this button to activate the picture color density

 

 

 

@ or VIDEO B (Y/C)

# and AUDIO B

% terminals on

 

adjustment mode or picture hue adjustment mode. Each

 

 

 

the rear panel. The button lights when selected.

 

 

 

time you press the button, the adjustment item changes.

 

 

 

Note:

 

 

 

 

Picture color density

f Picture hue

 

 

 

 

 

 

 

3.

● The VIDEO B terminals include a video terminal (BNC

 

 

Adjust the value with the VOLUME/SELECT buttons

 

 

 

 

 

 

connector) and a Y/C terminal (mini-DIN4-pinconnec-

 

 

 

 

 

 

 

 

 

 

 

Also used as a control button in the menu function mode.

tor). The Y/C (S-video)terminal has priority.

2

Contrast/Brightness button

 

7

 

[CONTRAST

/ BRIGHT

]

 

 

 

 

Press this button to activate the picture contrast adjust-

 

 

ment mode or picture brightness adjustment mode. Each

 

 

 

time you press the button, the adjustment item changes.

 

 

Picture contrast

f Picture brightness

 

 

Adjust the value with the VOLUME/SELECT buttons

3.

8

Also used as a control button in the menu function mode.

3 Volume/Select buttons

+]

9

[VOLUME/SELECT –

 

Adjusts the speaker volume. Also used as a control button in the menu function mode.

Power indicator

Unlit : The main power is OFF.

Orange : The main power is ON, but the monitor’s power is OFF (in the stand-bymode).

Green : The main power is ON, and the monitor’s power is ON (in the normal operation mode).

Power switch [POWER ]

Press the power switch to turn the monitor’s power ON or OFF when the main power is ON.

Speaker

A built-inspeaker is located inside the right side panel when the monitor is viewed from the front.

4 Menu button [MENU]

Displays and disappears the <MENU> screen.

Pressing the CHROMA/PHASE button 1 with the Menu button depressed will display the<SET-UPMENU>

screen.

5 Input A (VIDEO) button [INPUT SELECT A]

Selects the video and audio signals input to the VIDEO A ! and AUDIO A$ terminals on the rear panel. The button lights when selected.

3-1

4

 

REAR VIEW

<Rear Panel>

VIDEO A

11

 

 

 

IN

OUT

 

VIDEO B

 

12

 

 

 

IN

OUT

13

IN

Y/C

 

OUT

 

14

AUDIO A

 

IN

OUT

 

15

AUDIO B

 

IN

OUT

 

10 External control terminal [REMOTE]

Remote terminal for external control.

The input signal (the INPUT function) or the aspect ratio (the ASPECT RATIO function) can be selected by external control using a switch cable. Setting of the INPUT REMOTE or ASPECT REMOTE item in the <SET-

UP MENU> screen is required before using external control.

Refer to the HOW TO USE EXTERNAL CONTROL on page 14 for more details.

11 Video A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connectedvideo signal output terminal

Notes:

* For corresponding audio signals, use the AUDIO A terminals $.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

12 Video B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN

: Video signal input terminal

OUT :

Bridge-connectedvideo signal output terminal

Notes:

* For corresponding audio signals, use the AUDIO B terminals %.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

13 Video B (Y/C) terminals [VIDEO B Y/C IN/OUT]

Y/C (S-video)signal input (IN) and output (OUT) terminals. The output terminal isbridge-connected.

IN :Y/C-separated(S-video)video signal input terminal

OUT :Bridge-connectedY/C-separated(S-video)signal output terminal.

REMOTE

10

VIDEO A

VIDEO B

Y/C

AUDIO A

AUDIO B

Notes:

 

 

* For corresponding audio signals, use the AUDIO B

ENGLISH

terminals

%.

* When both VIDEO B terminals are connected (input) at

 

the same time, the Y/C terminal has priority.

 

 

* Also refer to BASIC CONNECTION EXAMPLE

 

on page 13.

 

 

14 Audio A terminals [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal

corresponding to the VIDEO A terminals

!.

The output terminal is bridge-connected.

 

IN

: Audio signal input

terminal

 

OUT :

Bridge-connected

audio signal output terminal

 

Notes:

* For corresponding video signals, use the VIDEO A terminal !.

*Also refer to BASIC CONNECTION EXAMPLE on page 12.

15 Audio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio

@

signals corresponding to the VIDEO B terminals

VIDEO B (Y/C) #.

 

The output terminal is bridge-connected.

 

IN

:

Audio signal input terminal

 

OUT

:

Bridge-connectedaudio signal output terminal

 

Notes:

 

* For corresponding video signals, use the VIDEO B

#.

terminals

@ or VIDEO B (Y/C) terminals

*Also refer to BASIC CONNECTION EXAMPLE on pages 12 and 13.

5

A170G-TM

4-1

CONTROLS AND FEATURES(cont’d)

REAR VIEW

<Rear Panel>

 

 

18

REMOTE

To AC outlet

 

 

 

(120 V AC,

For U.S.A. and Canada

 

 

50 Hz/60 Hz)

 

 

 

 

 

 

VIDEO A

To AC outlet

 

 

VIDEO B

(230 V AC,

 

18

 

50 Hz/60 Hz)

 

Y/C

 

For Europe

 

AUDIO A

 

 

AUDIO B

18

For the United Kingdom

16 Main power switch

Press the switch to turn the main power ON or OFF. When the main power is ON, the power indicator on the front panel lights in orange and the monitor enters the stand-bymode.

I : ON : OFF

17 AC inlet [AC IN]

Power input connector. Connect the provided AC power cord * to an AC outlet (120 V AC or 230 V AC, 50 Hz/60 Hz).

17

 

16

18 Power cord

Connects the provided power cord (120 V AC or

&.

230 V AC, 50 Hz/60 Hz) to the AC IN connector

Caution:

 

In North America (USA and Canada), this monitor comes

 

with one power cable. In Europe and the United King-

 

dom, two power cables are provided (one for use in

 

continental European countries and the other for the UK).

 

Be sure to use the power cable that is appropriate for the

 

AC outlets used in your region. If none of the power

 

cables provided is suitable, please contact your dealer or

 

qualified service personnel to obtain the correct type of

 

power cable.

 

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the main power switch to turn on the power.

 

 

STATUS indication

 

 

(PAL or NTSC)

2. Press the POWER switch to turn on the power.

 

 

 

PAL

ON :

Power turns ON. (Power indicator: lit)

 

 

 

POWER

Green: The main power is ON, and the monitor’s

 

 

 

 

power is ON (in the normal operation mode).

 

 

 

OFF :

Power turns OFF. (Power indicator: unlit)

 

 

 

 

Orange : The main power is ON, but the monitor’s

 

 

 

 

power is OFF (in the standby mode)

 

 

 

 

Unlit : The main power is OFF.

 

 

 

3. Press the INPUT SELECT buttons to choose input.

Select video/audio signals input to terminals on the rear panel. The selected button lights in green.

A

B

 

 

 

 

 

 

 

INPUT

Terminals on the rear panel

 

 

 

 

INPUT SELECT

 

 

 

SELECT

 

 

 

 

 

 

Video signal input

Audio signal input

 

 

 

 

buttons

 

 

 

 

1 Input A

VIDEO A terminal

AUDIO A terminal

 

 

 

 

(VIDEO)

 

 

 

 

 

 

 

 

 

 

 

2 Input B

VIDEO B terminal

 

AUDIO B terminal

 

 

 

 

(VIDEO Y/C)

 

 

 

 

 

 

VIDEO B (Y/C) terminal

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note:The Y/C (S-video)terminal has priority.

4. Press the VOLUME/SELECT buttons to adjust the speaker volume.

Press this button to display the speaker volume level on the

VOLUME/SELECT

 

 

 

screen.

 

 

 

 

 

 

 

+ : TheBuilt-inspeaker volume is increased. (00

= 50)

 

 

 

 

 

 

– : TheBuilt-inspeaker volume is decreased. (50

= 00)

*Screen indication will disappear about 10 seconds after operating.

*The on-screendisplay goes off when you press MENU button.

PICTURE ADJUSTMENT

1.Press select buttons corresponding to the item you want to adjust.

CHROMA

CONTRAST

The item you select is displayed on the screen.

 

 

1Chroma control

: Press the CHROMA/PHASE button once.

 

 

2Phase control

: Press the CHROMA/PHASE button twice.

PHASE

BRIGHT

3Contrast control

: Press the CONTRAST/BRIGHT button once.

 

 

4Brightness control : Press the CONTRAST/BRIGHT button twice.

 

 

*Pressing the CHROMA/PHASE button and CONTRAST/BRIGHT button alternately while the item is shown on screen restores the previous status. When no item is shown on screen, CHROMA and CONTRAST have priority.

2.Adjust with the VOLUME/SELECT buttons.

 

 

 

 

 

 

 

Items

VOLUME/SELECT button

VOLUME/SELECT

 

+

 

 

 

 

 

 

 

CHROMA

lighter

deeper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Chroma)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHASE

reddish

greenish

 

 

 

 

 

 

 

(Phase)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CONTRAST

lower

higher

 

 

 

 

 

 

 

(Contrast)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

BRIGHT

darker

brighter

 

 

 

 

 

 

 

(Brightness)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*Screen indication will disappear about 10 seconds after operating.

*The on-screendisplay goes off when you press MENU button.

About the STATUS indication

With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about 3 seconds on the screen while PAL or NTSC signals are being detected.

It does not appear when receiving a B/W signal or when no signal is input. Refer to page 8 for more information about COLOR SYSTEM setting and

page 9 for more information about STATUS indication setting.

00 ~ 50

VOLUME : 20

+

PHASE

:

00

+

Notes:

Phase control is effective only in the NTSC color system mode.

Chroma control is not effective when receiving B/W or when no signal is input.

When CHROMA is adjusted to “–40,”the picture becomes less colorful.

“NO EFFECT” is displayed (for about 3 seconds) when your selected

function has no effect.

ENGLISH

A170G-TM

6

7

4): Indicates the

HOW TO USE THE MENU FUNCTIONS

DISPLAY AND SELECTION IN THE <MENU> SCREEN MODE (SETTING)

You can set the following menu items.

 

 

<MENU> screen

 

 

 

 

 

 

 

1

 

 

 

 

< MENU >

Set them depending on your needs.

 

 

 

 

 

 

 

 

 

 

 

 

SHARPNESS

: 00

 

 

 

 

 

 

• SHARPNESS

• COLOR SYSTEM

 

 

 

 

COLOR TEMP.

: 6500

 

 

 

 

 

 

 

 

 

COLOR SYSTEM

: AUTO

• COLOR TEMP.

• ASPECT RATIO

 

 

 

 

 

 

 

 

ASPECT RATIO

: 4

-3

 

 

 

 

 

 

 

2

 

 

 

 

 

 

 

 

 

 

3

1. Press the MENU button.

MENU

The <MENU> screen is displayed.

 

* The on-screendisplay goes off automatically after about five

 

minutes with operation performed.

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select MENU items.

CHROMA

CONTRAST

PHASE

BRIGHT

SHARPNESS

COLOR TEMP.

COLOR SYSTEM

ASPECT RATIO

A selection mark (

 

4) is put next to the selected item.

 

 

 

 

 

 

Front panel

 

Function

Contents

 

button

 

displayed

 

 

 

 

CHROMA/

 

 

Forwards selection mark (

4)

PHASE

 

 

 

 

CONTRAST/

 

 

Reverses selection mark (

4)

BRIGHT

 

 

 

 

 

 

 

 

 

3. Press the VOLUME/SELECT buttons to set.

EXIT

4

CHROMA

CONTRAST

VOLUME/SELECT

MENU

PHASE

BRIGHT

 

 

<Front panel buttons>

1 Selection mark ( menu item you select.

2Menu item: Menu items you can select.

3 Setting display: Indicates the current settings (value).

4Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

VOLUME/SELECT

Front panel

 

Function

Contents

button

 

displayed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME/

 

+

Increases (to max. value)

 

 

 

 

 

 

 

SELECT (+)

 

4

Forwards the setting value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VOLUME/

 

Decreases (to min. value)

 

 

 

 

 

 

 

SELECT (–)

 

 

 

 

 

 

 

 

 

 

 

1

Reverses the setting value

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Menu items

Purpose

 

 

 

 

Setting range

 

 

 

 

 

 

 

 

 

 

SHARPNESS

Picture sharpness

00

+01

 

• • • • • • • • +39•• • +40•

 

 

 

 

 

 

 

 

 

 

 

COLOR TEMP.

Color temperature of white

6500

 

9300

 

 

 

 

 

balance

 

 

 

 

 

 

 

 

 

COLOR SYSTEM

Color system

AUTO

 

 

NTSC

AUTO

PAL

 

 

 

 

 

ASPECT RATIO

Aspect ratio

4-3

 

 

16-9

 

 

 

 

 

 

 

 

 

* For normal use, leave the COLOR SYSTEM setting to AUTO.

If reception is unsatisfactory in AUTO position, set it to the appropriate color system mode (NTSC or PAL).

*When ASPECT REMOTE in the <SET-UPMENU> screen is set to ON, “REMOTE” is displayed on the ASPECT RATIO setting and the aspect ratio cannot be changed from the <MENU> screen.

Function

Contents

displayed

 

 

Forwards the menu item.

 

Reverses the menu item.

Lowers the adjustment

 

value. (to the minimum)

+

Raises the adjustment

 

value. (to the maximum)

4

Forwards the setting value.

 

 

1

Reverses the setting value.

 

 

EXIT

Exits the <MENU> screen.

 

 

When the screen aspect ratio is set to 16 - 9 (16:9) in ASPECT RATIO, the picture will be vertically reduced.

4.If you want to set the other menu items, repeat procedures 2 and 3.

5.Press the MENU button to quit.

MENU

Front panel

Function

Contents

button

 

displayed

 

 

 

 

MENU

 

EXIT

Quits (or Releases) the <MENU>

 

 

screen

 

 

 

 

 

 

 

 

 

5-1

8

 

DISPLAY AND SELECTIONS IN THE <SET-UPMENU> MODE (SETTING)

You can set the following set-upmenu items.

• H. POSITION

• CONTROL LOCK

• ASPECT REMOTE

• V. POSITION

• STATUS DISPLAY

 

• WHITE BALANCE

• INPUT REMOTE

 

Notes:

Parameters for H. POSITION and V. POSITION can be set separately depending on

the signal (Input A (VIDEO), Input B (VIDEO) or Input B (Y/C)) selected with the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value.

Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

<SET-UPMENU> screen

1<SET-UPMENU>

 

‰ H. POSITION

:

00

 

V. POSITION

:

00

 

WHITE BALANCE

 

 

 

CONTROL LOCK

: OFF

 

 

STATUS DISPLAY

: ON

 

 

INPUT REMOTE

: OFF

 

2

ASPECT REMOTE

: OFF

3

 

 

 

 

 

EXIT

 

4

CHROMA

CONTRAST

VOLUME/SELECT

 

MENU

PHASE BRIGHT

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA

MENU

The <SET-UPMENU> screen is displayed.

PHASE

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT

button to select the desired menu item.

CHROMA

CONTRAST

PHASE

BRIGHT

H. POSITION

V. POSITION

WHITE BALANCE

CONTROL LOCK

STATUS DISPLAY

INPUT REMOTE

A selection mark (

 

4) is put next to the selected item.

 

 

 

 

 

 

Front panel

 

Function

Contents

 

button

 

displayed

 

 

 

 

CHROMA/

 

 

Forwards selection mark (

4)

PHASE

 

 

 

 

 

 

 

 

 

 

CONTRAST/

 

 

Reverses selection mark (

4)

BRIGHT

 

 

 

 

 

 

 

 

 

 

ASPECT REMOTE

3. Press the VOLUME/SELECT buttons to set.

VOLUME/SELECT

Front panel

 

Function

 

Contents

 

 

 

 

 

 

 

button

 

displayed

 

 

 

 

 

 

 

 

VOLUME/

 

+

 

Increases (to max. value)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

Forwards the setting value

 

 

 

 

 

 

 

SELECT (+)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUTO

Selects CUT OFF setting screen

 

 

 

 

 

 

 

VOLUME/

 

 

Decreases (to min. value)

 

 

 

 

 

 

 

SELECT (–)

 

1

 

Reverses the setting value

 

 

 

 

 

 

 

 

 

DRV

Selects DRIVE setting screen

Notes:

For WHITE BALANCE items, select the CUT OFF or DRIVE setting screen, then select the function display for adjustment.

Press the EXIT (MENU) button to return to the <SET-UPMENU> screen.

<Front panel buttons>

1 Selection mark (

4): Indicates the

menu item you select.

 

2 Menu item: Menu items you can select.

3 Setting display: Indicates the current settings (value).

4 Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

Function

 

Contents

displayed

 

 

 

 

 

 

 

 

Forwards the menu item.

 

 

 

 

 

Reverses the menu item.

 

 

 

 

Lowers the adjustment

 

 

value. (to the minimum)

 

 

 

+

 

Raises the adjustment

 

 

value. (to the maximum)

 

 

 

4

 

Forwards the setting value.

 

 

 

1

 

Reverses the setting value.

 

 

 

EXIT

 

Exits the <SET-UP

 

MENU> screen.

 

 

DRV

Selects DRIVE adjustment.

CUTO

 

Selects CUT OFF

 

adjustment.

 

 

RB

 

Adjusts red and blue

 

signal level.

 

 

 

 

 

RGB

 

Adjusts red, green and

 

blue signal level.

 

 

 

 

 

 

 

Turns the ON-SCREEN

DISP

 

display on or off. (This

 

function is effective only in

 

 

 

 

the DRIVE or CUT OFF

 

 

adjustment mode.)

 

 

 

ENGLISH

9

A170G-TM

6-1

HOW TO USE THE MENU

FUNCTIONS (cont’d)

 

Set-upmenu items

 

 

 

 

 

 

 

 

 

 

 

Purpose

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

H. POSITION

 

 

 

 

 

 

 

 

 

Adjusts the horizontal position of the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

screen (+: Horizontal position shifts

 

 

 

 

 

 

 

 

 

 

–5

• • •

–01

00

+1

 

• • •

+5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the right/-:Horizontal position shifts to

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the left)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V. POSITION

 

 

 

 

 

 

 

 

 

Adjusts the vertical position of the screen

 

 

 

 

 

 

 

 

 

 

–5

• • •

–01

00

+1

 

• • •

+5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(+: Vertical position moves up/-:Vertical

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

position moves down)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHITE BALANCE

 

 

 

 

 

 

Adjusts the white balance.

Selects the drive (DRV) or cut off (CUTO) adjustment. The selected

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

setting screen is shown. Select the function display for adjustment.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DRIVE

R.

DRIVE

Adjusts red level.

 

 

 

 

 

 

 

 

 

 

–20

–19

• • –01

00

+01

• • +19

+20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B. DRIVE

 

 

 

Adjusts blue level.

 

 

 

 

 

 

 

 

 

 

–20

–19

• • –01

00

+01

• • +19

+20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CUT OFF

R.

CUT OFF

Adjusts red cut off.

 

 

 

 

 

 

 

 

 

 

–20

–19

• • –01

00

+01

• • +19

+20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

G. CUT OFF

 

 

 

Adjusts green cut off.

 

 

 

 

 

 

 

 

 

 

–20

–19

• • –01

00

+01

• • +19

+20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B. CUT OFF

 

 

 

Adjusts blue cut off.

 

 

 

 

 

 

 

 

 

 

–20

–19

• • –01

00

+01

• • +19

+20

 

 

 

 

 

 

 

 

 

 

 

 

CONTROL LOCK

 

 

 

 

 

 

 

Sets the operation buttons on the front

 

 

 

 

 

 

 

 

 

 

OFF

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

panel to control lock mode.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

STATUS DISPLAY

 

 

 

 

 

 

 

Sets the status display of the color system.

 

 

 

 

 

 

 

 

 

 

OFF

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT REMOTE

 

 

 

 

 

 

 

Sets external control of input selection

 

 

 

 

 

 

 

 

 

 

OFF

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(INPUT A/B).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ASPECT REMOTE

 

 

 

 

 

Sets external control of the aspect ratio.

 

 

 

 

 

 

 

 

 

 

OFF

 

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

*1 Refer to HOW TO USE EXTERNAL CONTROL on page 14 for more details.

4.To set the other set-upmenu items, repeat the procedures 2 and 3.

5.Press the MENU button to quit.

MENU

Front panel

 

Function

Contents

button

 

displayed

 

 

 

 

 

 

 

 

 

MENU

 

EXIT

Quits (or Releases) the <MENU>

 

 

screen

 

 

 

 

 

 

 

 

 

Notes:

When the CONTROL LOCK function is set to ON, pressing operation

buttons on the front panel will display the message “CONTROL LOCK ON!” on the screen for about 3 seconds.

The CONTROL LOCK function is maintained even when the power is turned off.

To turn off the CONTROL LOCK function, while holding the MENU button press the CHROMA/PHASE button. Then set the CONTROL LOCK function to OFF.

Even when the CONTROL LOCK function is set to ON, the following operations are available:

Power Switch operation

Volume control with the VOLUME/ SELECT buttons

Display or disappear of the <SETUP MENU> screen.

The STATUS DISPLAY function can

be set to display (ON) or not display (OFF) the present color system when the power is turned on or the input signal is changed. Refer to page 7 for more information.

When INPUT REMOTE is activated (ON), and any one of the INPUT A and B buttons is pressed, “REMOTE ON!” appears on screen for about 3 seconds.

To enable external control (the INPUT or ASPECT RATIO function), set INPUT REMOTE or ASPECT

REMOTE to ON.

HOW TO INITIALIZE THE SETTING

SCREEN DISPLAY AND SELECTIONS IN THE <SET-UPMENU> RESET MODE

You can set <MENU> and <SET-UPMENU> screen items, picture adjustment items and the volume level to theirfactory-set(initial) values.

1. Press the Power (

 

) switch to turn the power

 

OFF (activate the standby mode).

 

 

POWER

 

 

 

 

2. While pressing both MENU button and

 

CHROMA/

PHASE button, press the Power (

 

) switch to turn

 

the power ON.

 

 

 

 

The <SET-UPMENU> RESET screen is displayed.

CHROMA

MENU

POWER

Note:

PHASE

The <SET-UPMENU> RESET screen will not be displayed if the MENU or CHROMA/PHASE buttons are

pressed for a very short time. Keep pressing them until the display screen appears.

3.Setting

Initialization is required.

Press the VOLUME/SELECT [+] button.

VOLUME/SELECT

* Initialization is completed, and the <SET-UPMENU> RESET screen disappears.

Initialization is not required.

MENU

Press the MENU button.

* Initialization is aborted, and the <SET-UPMENU> RESET screen disappears.

<SET-UPMENU> RESET screen

<SET–UPMENU> RESET

Are you sure ? “Yes” then <+> “No” then <MENU>

Initial settings

Sorts

Functions (Items)

Initialization

 

 

(setting)

 

 

 

 

 

 

 

 

 

 

SHARPNESS

00

 

 

 

 

screen<MENU>

COLOR TEMP.

6500

 

 

 

ENGLISH

COLOR SYSTEM

 

 

AUTO

 

 

ASPECT RATIO

4 – 3

 

 

 

 

 

 

 

 

 

 

 

H. POSITION

 

00

 

 

 

 

 

 

 

 

 

V. POSITION

 

00

 

 

 

 

WHITE BALANCE

 

 

 

 

 

 

R. CUT OFF

00

 

 

 

 

G. CUT OFF

00

 

 

 

screen

B. CUT OFF

00

 

 

 

R. DRIVE

 

00

 

 

 

MENU>

B. DRIVE

00

 

 

 

 

 

 

 

-<SETUP

CONTROL LOCK

OFF

 

 

 

STATUS DISPLAY

ON

 

 

 

 

 

 

 

 

 

 

INPUT REMOTE

OFF

 

 

 

 

ASPECT REMOTE OFF

 

 

 

 

 

 

 

 

 

 

 

CHROMA

00

 

 

 

adjustment

PHASE

 

00

 

 

 

BRIGHT

00

00

 

 

 

 

CONTRAST

 

 

 

 

Picture

 

 

 

 

 

 

 

 

 

 

 

 

 

Volume

VOLUME

 

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A170G-TM

10

11

BASIC CONNECTION EXAMPLE

Notes:

Before connecting your system, make sure

that all units are turned off.

 

 

The illustration below shows some examples of

dif

ferent

connections. Terminal connections may differ depending on the

component connected. Be sure to refer to the instructions provided with the unit(s) you are connecting.

Each pair of input (IN) and output (OUT) terminals are bridge-connected.

If you’re not connecting any equipment to a bridged output (OUT) terminal, be sure not to connect any other cables to the bridged output (OUT) terminal as this will cause the terminating resistance switch to open (auto terminate function).

When making a bridge connection, connect the input (IN) and output (OUT) terminals on the monitor to separate video components.

(For example, if both terminals are connected to the same VCR, resonance may occur except during playback. This is caused by the same video signal “looping” between the VCRs, and is not a malfunction.)

Select the video input signal (INPUT A(VIDEO) or INPUT B (VIDEO/Y/C)) with the INPUT SELECT buttons on the front panel. When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal has priority.

VIDEO A Connection Example (Select Input A (VIDEO))

Video Camera

Video Monitor

VCR

Video

(Video signal cable)

Audio

(Audio signal cable)

VIDEO B (VIDEO) Connection

Example (Select Input B (VIDEO))

Video Camera

Video

 

(Video signal cable)

Video Monitor

Audio

 

 

(Audio signal cable)

VCR

 

VIDEO A

IN

OUT

VIDEO B

IN OUT

IN Y/C

OUT

AUDIO A

IN

OUT

AUDIO B

OUT

Video

(Video signal cable)

Video

(Video signal cable)

Audio

(Audio signal cable)

Audio

(Audio signal cable)

: Signal Flow

VCR

Video Monitor

VCR

Video Monitor

VIDEO B (Y/C) Connection Example (Select Input B (Y/C))

 

 

 

VIDEO A

 

 

 

IN

OUT

 

Video Camera

VIDEO B

 

 

 

IN

OUT

 

Y/C (S-video)

 

 

VCR

(Y/C (S-video)signal cable)

IN

Y/C

 

 

 

Video Monitor

 

 

Y/C (S-video)

 

 

 

 

OUT

 

(Y/C (S-video)signal cable)

 

AUDIO A

 

 

VCR

IN

OUT

Video Monitor

AUDIO B

 

Audio

 

Audio

(Audio signal cable)

IN

OUT

(Audio signal cable)

: Signal Flow

ENGLISH

7-1

12

13

A170G-TM

8-1

HOW TO USE EXTERNAL

CONTROL

ABOUT EXTERNAL CONTROL

This monitor is provided with an external control terminal.

The function is controlled with H and L (short-circuit/openwith the 15th pin GND)

Note:

● The ASPECT RATIO or INPUT function can be controlled via the REMOTE terminal by setting ASPECT REMOTE or INPUT REMOTE to ON in the <SET-UPMENU> screen. (Refer to pages 9 and 10.)

Connections

Connect (short-circuit)the 15th terminal (GND) to the 2nd or 10th terminals in the3-line15-pinD-subconnector. Do not conne

ct

other terminals.

 

External

External control switch

control

Open circuit

Closed circuit

functions

(open)

(short)

 

 

 

ASPECT RATIO

4-3(4:3)

16-9(16:9)

 

 

 

External control switch

Open circuit (open)

ASPECT

Closed circuit (short)

External

External control switch

 

 

control

Open circuit

Closed circuit

functions

(open)

(short)

 

 

 

INPUT

INPUT A

INPUT B

 

 

 

External control switch

Open circuit (open)

INPUT

Closed circuit (short)

10

15

GND

2

TROUBLESHOOTING

Solutions to common problems related to your monitor are described here. If none of the solutions presented here solves the problem, unplug the monitor and consult a JVC-authorizeddealer or service center for assistance.

Problems

Points to be checked

Measures (Remedy)

 

 

 

 

 

 

 

No power supply.

Is the power plug loosened or disconnected?

Firmly insert the power plug.

 

 

 

 

 

 

 

 

Is the main power turned OFF?

Turn the main power ON. (See page 6.)

 

 

 

 

 

 

 

No picture with the

Is the video signal output from the connected

Set the connected component correctly.

 

 

power on.

component?

 

 

 

 

 

 

 

 

 

Is the input signal selected properly?

Select the required video signal input with the

 

 

 

 

Input select button. (See page 7.)

 

 

 

 

 

 

 

 

Is the video cable disconnected?

Connect the video signal cable firmly.

 

 

 

 

(See pages 12 and 13.)

 

 

 

 

 

 

 

No sound.

Is the audio signal output from the connected

Set the connected component correctly.

 

 

 

component?

 

 

 

 

 

 

 

 

 

Is the volume output set to minimum?

Adjust the speaker volume with the VOLUME/

 

 

 

 

SELECT button. (See page 7.)

 

 

 

 

 

 

 

 

Is the audio cable disconnected?

Connect the audio signal cable firmly.

 

 

 

 

(See pags 12 and 13.)

 

 

 

 

 

 

 

Shaking picture.

Is the monitor close to a device generating a

Move the device away from the monitor until the

 

 

 

strong magnetic field?

picture stabilizes.

 

 

 

 

 

 

 

No colors, wrong

Is the color system selected properly?

Set COLOR SYSTEM in the <MENU> screen to

 

 

color, or dark picture.

 

AUTO. (See page 8.)

 

ENGLISH

 

 

 

 

 

Has the picture control setting (CONTRAST,

Set each picture control to the standard setting.

 

 

 

 

 

BRIGHT, CHROMA or PHASE) been changed?

(See page 7.)

 

 

 

 

 

 

 

Unnatural, irregularly

Is the monitor close to a speaker, magnet or any

Move the device away from the monitor and turn

 

 

colored, or distorted

other device generating a strong magnetic field?

the monitor’s power off. Wait at least 30 minutes,

 

 

picture.

 

then turn the power on again.

 

 

 

 

 

 

 

Dark stripes appear

Is the aspect ratio set to 16:9?

Set ASPECT RATIO in the <MENU> screen to

 

 

at the top and bottom

 

[4 : 3 (4 – 3)]. (See page 8.)

 

 

of the screen, picture

 

When controlling externally, ASPECT RATIO

 

 

vertically squeezed.

 

should be set to [4 : 3 (4 – 3)]. (See page 14.)

 

 

 

 

 

 

 

Function buttons on

Has control of the buttons been locked? (Has

Set CONTROL LOCK in the <SET-UPMENU>

 

 

the front panel do not

the CONTROL LOCK function been set to ON?)

screen to OFF. (See pages 9 and 10.)

 

 

function.

 

 

 

 

 

 

 

 

 

The INPUT SELECT

Is input selection under external control? (Has

Set INPUT REMOTE in the <SET-UPMENU>

 

 

buttons do not

the INPUT REMOTE function been activated

screen to OFF. (See pages 9 and 10.)

 

 

function.

(ON)?)

 

 

 

 

 

 

 

 

The following are not malfunctions:

● When a bright still image (such as a white

cloth) is

displayed for a long period, it may appear to be colored. This is due to t

he

structure of the cathode ray tube and will

be deleted

when another image is displayed.

 

You experience a mild electric shock when you touch the picture tube. This phenomenon is due to a normal buildup of static electricity on the CRT and is not harmful.

The monitor emits a strange sound when the room temperature changes suddenly. This is only a problem if an abnormality appears on the screen as well.

If two or more monitors are operated next to each other, their images may shake or be distorted. This phenomenon is due to mutual interference; it is not a malfunction. Move the monitors away from each other until the interference disappears or turn the power off on any monitor that is not being used.

A170G-TM

14

15

TM-A170G

SPECIFICATIONS

Type

:

Color video monitor

 

 

Built-inspeaker

Color system

:

PAL, NTSC (3.58)

 

 

Picture tube

:

44 cm (17") measured diagonally,

Environmental

 

 

90° deflection, in-linegun,

conditions

 

 

trio-dottype (phosphordot-trio

 

 

 

pitch 0.27 mm)

 

 

 

Effective screen size

:

Width

327.5 mm (12-7/8")

 

 

 

Height

246.2 mm (9-5/8")

Power requirements

 

 

Diagonal

407.1 mm (16-1/32")

Power consumption

Scanning frequency

: (H) 15.734 kHz (NTSC)

 

 

 

15.625 kHz (PAL)

Dimensions

 

 

(V) 59.94 Hz (NTSC)

 

 

 

50 Hz (PAL)

 

 

 

Horizontal resolution

:

750 TV lines or more

 

 

Weight

Input terminals

 

 

 

 

 

Accessory

VIDEO A

:

Composite video:

 

 

 

 

 

1 line, BNC connector x 2,

 

 

 

1 V(p-p),75

, negative sync

 

 

 

(bridge connection possible,

 

 

 

auto termination)

 

 

 

VIDEO B

:

Composite video:

 

 

 

 

 

1 line, BNC connector x 2,

 

 

 

1 V(p-p),75

Ω,

negative sync

 

 

 

(bridge connection possible,

 

 

 

auto termination)

 

 

 

 

 

Y/C-separated:

 

 

 

 

 

1 line, mini-DIN4-pin

 

 

 

connector x 2

 

 

 

 

Y: 1.0 V (p-p),75

 

 

 

C (BURST): 0.286 V (p-p),

 

 

 

75 Ω

(NTSC)

 

Ω (PAL)

 

 

 

0.3 V (p-p),75

 

 

 

 

(bridge connection possible,

 

 

 

auto termination)

 

 

 

AUDIO A

: 1 line (monaural), RCA pin x 2

 

 

 

0.5 V(rms), high-impedance

 

 

 

(bridge connection possible)

 

AUDIO B

: 1 line (monaural), RCA pin x 2

 

 

 

0.5 V(rms), high-impedance

 

 

 

(bridge connection possible)

 

REMOTE

:

Point-of-contactconnection,

 

 

 

1 line

 

 

 

 

 

 

D-subconnector(15-pin,3-line)

 

Audio power output

:

1 W (monaural)

 

 

 

*Illustrations used in this manual are for explanatory purposes only. The appearance of the actual product may differ slightly

*Dimensions and weight are approximate.

*E. & O. E. Design and specifications subject to change without notice.

: 8 cm round x 1

impedance of 8

: Operation temperature:

5°C – 40°C (41°F – 104°F) Operation humidity:

20 % – 80 % (non-condensing)

:120 V/230 V AC, 50 Hz/ 60 Hz

:1.1 A (120 V AC)/0.7 A (230 V

AC)

 

: Width

395 mm (15-5/8")

Height

334 mm (13-1/4")

Depth

418 mm (16-1/2")

:19.6 k g (43.2 lbs)

:AC power cord

.

16

1-9

TM-A170G

Dimensions

 

 

Unit : mm (inch)

 

 

< Front View >

 

 

 

 

< Side View >

 

 

 

 

 

 

 

 

 

418 (16-1/2")

 

 

 

395 (15-5/8")

 

 

1.5

 

407 (16-1/8")

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(1/16")

 

 

 

336.3 (13-1/14")*

 

 

 

 

 

 

 

 

(10-3/8")*

 

 

334 (13-1/4")

 

 

 

 

 

256

 

 

(7")

 

 

 

 

 

 

 

 

175

 

 

 

 

 

288 (11-3/8")

 

 

(1/8")3

68

286 (11-3/8")

 

CHROMA

CONTRAST VOLUME/SELECT

MENU

A

B

POWER

 

 

TM-A170

PHASE

BRIGHT

 

INPUT SELECT

 

 

 

 

 

 

 

 

 

 

ø20

(2-3/4")

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(ø7/8")

 

 

* Asterisks ( *) are used to indicate front panel dimensions.

Y/C (Mini DIN 4 pin) terminal specification

 

2

4

Pin No.

Signal

 

IN

 

1

GND (Y)

 

1

3

 

2

GND (C)

 

 

Y/C

OUT

2

4

3

Y

 

 

 

1

3

4

C

3 (1/8")

ENGLISH

17

1-10

TM-A170G

-MEMO-

1-11

TM-A170G

A170G-TM

COLOR

MONITOR VIDEO

VICTOR COMPANY OF JAPAN, LIMITED

Printed in Thailand

0702-Y-U-JMT

© 2002 VICTOR COMPANY OF JAPAN, LIMITED

1-12

VP0207

 

DP3051