TM-A101G
OPERATING INSTRUCTIONS
COLOR VIDEO MONITOR
BEDIENUNGSANLEITUNG : FARB-VIDEO-MONITOR MANUEL D’INSTRUCTIONS : MONITEUR VIDEO COULEUR MANUALE DI ISTRUZIONI : MONITOR VIDEO A COLORI
INSTRUCCIONES : MONITOR DE VIDEO A COLOR
COLOR!"#VIDEO$%&'(&)MONITOR
TM-A101G |
INSTRUCTIONS |
|
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.
Retain this information for future reference.
Pour l’usage du client:
Enter ci-dessous le numéro de série qui est situé sur l’arrière du coffret.
Conserver cette information pour une référence ultérieure.
Model No. : |
TM-A101G |
Numéro de modèle : |
|
Serial No. : |
|
Numéro de série : |
|
CHROMA CONTRAST |
VOLUME/SELECT |
MENU |
A |
B |
POWER |
|
|
|
|
|
ON |
|
|
|
INPUT SELECT |
OFF |
|
PHASE BRIGHT |
|
|
|
LCT1024-001B-H 1101-Y-U-JMT
==== ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
1-1
Dec. 2001 No. 51921
2-1
51921.No
In order to prevent any fatal accidents caused by misoperation or mishandling the monitor, be fully aware of all the following precautions.
WARNINGS
To prevent fire or shock hazard, do not expose this monitor to rain or moisture. Dangerous high voltages are present inside the unit. Do not remove the back cover of the cabinet. When servicing the monitor, consult qualified service personnel. Never try to service it yourself.
WARNING : THIS APPARATUS MUST
BE EARTHED.
Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB(A) according to ISO 7779.
Improper operations, in particular alternation of high voltage or changing the type of tube may result in x-ray emission of considerable dose. A unit altered in such a way no longer meets the standards of certification, and must therefore no longer be operated.
This monitor is equipped with a 3-blade grounding-type plug to satisfy FCC rule. If you are unable to insert the plug into the outlet, contact your electrician.
FCC INFORMATION (U.S.A. only)
CAUTION: Changes or modification not approved by JVC could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Notice (U.S.A. only)
This product utilizes both a Cathode Ray Tube (CRT) and other components that contain lead. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org.>
PRECAUTIONS
●Use only the power source specified on the unit. (120 V AC/230 V AC, 50 Hz/60Hz)
●When not using this unit for a long period of time, or when cleaning it, be sure to disconnect the power plug from the AC outlet.
●Do not allow anything to rest on the power cord. And do not place this unit where people will tread on the cord. Do not overload wall outlets or power cords as this can result in a fire or electric shock.
●Avoid using this unit under the following conditions:
–in extremely hot, cold or humid places,
–in dusty places,
–near appliances generating strong magnetic fields,
–in places subject to direct sunlight,
–in badly ventilated places,
–in automobiles with doors closed.
●Do not cover the ventilation slots while in operation as this could obstruct the required ventilation flow.
●When dust accumulates on the screen surface, clean it with a soft cloth.
●Unplug this unit from the AC outlet and refer servicing to qualified service personnel under the following conditions:
–when the power cord is frayed or the plug is damaged,
–if liquid has been spilled into the unit,
–if the unit has been dropped or the cabinet has been damaged,
–when the unit exhibits a distinct change in performance.
●Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Always refer servicing to qualified service personnel.
●When replacement parts are required, have the service personnel verify in writing that the replacement parts he/ she uses have the same safety characteristics as the original parts. Use of manufacture’s specified replacement parts can prevent fire, shock, or other hazards.
●Upon completion of any servicing or repair work to this unit, please ask the service personnel to perform the safety check described in the manufacturer’s service literature.
●When this unit reaches the end of its useful life, improper disposal could result in a picture tube implosion. Ask qualified service personnel to dispose of this unit.
POWER CONNECTION
The power supply voltage rating of this product is AC 120 V (For U.S.A. and Canada only) and AC 230 V (For European countries or United Kingdom), the power cord attached conforms to the following power supply voltage and countries. Use only the power cord designated to ensure Safety and EMC regulations of each countries.
Power cord
Power supply voltage : AC 120 V |
AC 230 V |
AC 230 V |
|
Countries |
: U.S.A. and Canada |
European countries |
United Kingdom |
Warning:
●Do not use the same Power Cord for AC 120 V as for AC 230 V. Doing so may cause malfunction, electric shock or fire.
Note for the United Kingdom power cord only
The plug on the United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover.
(Consult your dealer or qualified service personnel.)
How to replace the fuse |
|
Open the fuse compartment with the blade screw driver, and |
|
replace the fuse. |
|
(* An example is shown in the illustration.) |
|
Fuse |
ENGLISH |
images on screen. This may cause a burning (sticking) phenomenon on the screen of cathode-ray tube. This problem does |
|
SCREEN BURN |
|
● It is not recommended to keep a certain still image displayed on screen for a long time as well as displaying extremely bright |
|
not occur as far as displaying normal video playback motion images. |
|
CONTENTS |
|
SAFETY PRECAUTIONS ................................................................................. |
2 |
CONTROLS AND FEATURES ......................................................................... |
4 |
HOW TO HANDLE BASIC OPERATIONS ....................................................... |
7 |
HOW TO USE THE MENU FUNCTIONS.......................................................... |
8 |
HOW TO INITIALIZE THE SETTING ............................................................... |
11 |
BASIC CONNECTION EXAMPLE.................................................................. |
12 |
TROUBLESHOOTING.................................................................................... |
13 |
SPECIFICATIONS .......................................................................................... |
14 |
A101G-TM
2 |
3 |
51921.No
4
3-1
FRONT VIEW
<Front Panel>
1 |
2 |
|
5 |
|
6 |
9 |
|
|
|
|
|
CHROMA CONTRAST VOLUME/SELECT |
MENU |
A |
B |
POWER |
|
|
|
|
|
|
ON |
|
|
|
INPUT SELECT |
OFF |
|
PHASE |
BRIGHT |
|
|
||
POWER |
|
|
|
|
|
1 Chroma/Phase button
[ CHROMA/ PHASE]
Press this button to activate the picture color density adjustment mode or picture hue adjustment mode. Each time you press the button, the adjustment item changes.
Picture color density f Picture hue
Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.
3 |
4 |
7 |
8 |
5 Input A (VIDEO) button [INPUT SELECT A]
Selects the video and audio signals input to the VIDEO A 0 and AUDIO A @ terminals on the rear panel. The button lights when selected.
6 Input B (VIDEO) button [INPUT SELECT B]
Selects the video and audio signals input to the VIDEO B ! and AUDIO B # terminals on the rear panel. The button lights when selected.
2 Contrast/Brightness button [CONTRAST / BRIGHT ]
Press this button to activate the picture contrast adjustment mode or picture brightness adjustment mode. Each time you press the button, the adjustment item changes.
Picture contrast f Picture brightness
Adjust the value with the VOLUME/SELECT buttons 3. Also used as a control button in the menu function mode.
3 Volume/Select buttons [VOLUME/SELECT – +]
Adjusts the speaker volume. Also used as a control button in the menu function mode.
4 Menu button [MENU]
Displays and disappears the <MENU> screen. Pressing the CHROMA/PHASE button 1 with the Menu button depressed will display the <SET-UP MENU> screen.
7 Power indicator
Lights in green when the power is ON. Lit : When the power is on.
Unlit : When the power is off.
8 Power switch [POWER]
Press this switch to turn the power on or off. g ON : Power is turned on.
G OFF : Power is turned off.
9 Speaker
A built-in speaker is located inside the left side panel when the monitor is viewed from the front.
REAR VIEW
<Rear Panel>
|
VIDEO A |
IN |
OUT |
|
VIDEO B |
IN |
OUT |
|
AUDIO A |
IN |
OUT |
IN |
OUT |
|
AUDIO B |
INPUT |
ASPECT |
|
REMOTE |
10 Video A terminals [VIDEO A IN/OUT]
Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
*For corresponding audio signals, use the AUDIO A terminals @.
*Also refer to BASIC CONNECTION EXAMPLE on page 12.
11 Video B terminals [VIDEO B IN/OUT]
Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.
IN : Video signal input terminal
OUT : Bridge-connected video signal output terminal
Notes:
*For corresponding audio signals, use the AUDIO B terminals #.
*Also refer to BASIC CONNECTION EXAMPLE on page 12.
12 Audio A terminals [AUDIO A IN/OUT]
Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals 0.
The output terminal is bridge-connected. IN : Audio signal input terminal
OUT : Bridge-connected audio signal output terminal
Notes:
*For corresponding video signals, use the VIDEO A terminal 0.
*Also refer to BASIC CONNECTION EXAMPLE on page 12.
|
|
VIDEO A |
|
|
|
10 |
|
|
IN |
OUT |
|
|
|
VIDEO B |
|
|
|
11 |
|
|
IN |
OUT |
|
|
|
AUDIO A |
|
|
|
12 |
|
|
IN |
OUT |
|
|
IN |
13 |
|
|
OUT |
|
|
|
|
AUDIO B |
|
|
|
14 |
ENGLISH |
|
INPUT |
ASPECT |
|
|
|
REMOTE |
|
13 Audio B terminals [AUDIO B IN/OUT] |
|
||
Input (IN) and output (OUT) terminals for the audio |
|
||
signals corresponding to the VIDEO B terminals ! . |
|
||
The output terminal is bridge-connected. |
|
||
IN |
: Audio signal input terminal |
|
|
OUT |
: Bridge-connected audio signal output terminal |
|
Notes:
*For corresponding video signals, use the VIDEO B terminals !.
*Also refer to BASIC CONNECTION EXAMPLE on page 12.
14 Remote terminals [REMOTE INPUT, ASPECT]
Remote terminals for external control. Selecting VIDEO A or VIDEO B and ASPECT RATIO is available via external control. External control is set in the <SET-UP MENU> screen.
To use external control, you must build a switch cable and connect it to the REMOTE terminals.
External control |
External control switch |
||
|
|
||
functions |
Open circuit |
Closed circuit |
|
(open) |
(short) |
||
|
|||
|
|
|
|
ASPECT RATIO |
4–3 (4:3) |
16–9 (16:9) |
|
|
|
|
|
INPUT |
INPUT A |
INPUT B |
Note:
●Also refer to BASIC CONNECTION EXAMPLE on page 12.
5
A101G-TM