JVC LT-32D50SJ, LT-26D50BJ, LT-32D50BJ, LT-26D50SJ User Manual

0 (0)

LT-32D50BJ LT-26D50BJ LT-32D50SJ LT-26D50SJ

DynaPix LCD IDTV with D.I.S.T.

INSTRUCTIONS

Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number: 3249

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 2 Thursday, October 7, 2004 4:42 PM

Warning

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adaptor or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If a new mains plug has to be fitted, then follow the instruction given below:

Important

Do not make any connection to the larger terminal which is marked with the letter E or

by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue: Neutral

Brown: Live

As these colours may not correspond with the coloured marking identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When replacing the fuse, use only a correctly rated approved type and always re-fit the fuse cover.

If in doubt — consult a competent electrician.

How to replace the fuse

Open the fuse compartment with a

blade screwdriver, and replace the fuse.

Fuse

Guidelines for safe operation

This equipment has been designed and manufactured to comply with international safety standards. However, as with any electrical appliance, care must be taken to ensure optimal results and operational safety.

Before attempting to use this equipment, read the operating instructions thoroughly.

Ensure that all electrical connections (including the mains plug, extension leads, etc.) have been made in accordance with the manufacturer’s instructions.

If ever in doubt about the installation, operation or safety of this equipment, consult your dealer.

Handle all glass panels or covers with care.

Never operate this equipment if it appears damaged or operates abnormally. Turn the power off, disconnect the main power plug and consult your dealer.

Never remove any affixed panels or covers. Doing so may result in electrical shock.

Never leave this equipment operating unattended unless otherwise specifically stated that it is designed to do so or in standby mode. Only use the designated power switch to turn off the power and ensure that all potential users are instructed how to do so. Make special arrangements for infirm or handicapped persons.

Never watch TV while operating a motor vehicle. It is illegal to watch TV while driving.

Never listen to headphones at high volume. Doing so may damage your hearing.

Never obstruct the ventilation of this equipment. Doing so may cause overheating and result in a malfunction or damage.

Never use makeshift stands or attempt to affix legs with wood screws. When using a manufacturer’s approved stand or legs, use only the fixtures provided and follow the installation instructions.

Never allow this equipment to be exposed to rain or moisture.

Never allow anyone, especially children, to insert anything into an opening in the case. Doing so may result in a fatal electrical shock.

Never guess or take chances with electrical equipment of any kind. It is better to be safe than sorry.

2

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 3 Thursday, October 7, 2004 4:42 PM

Thank you for buying this JVC LCD flat television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin. (“LCD” stands for Liquid Crystal Display.)

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

WARNING: WHEN PUTTING THE TV DOWN, DO SO SLOWLY AND CAREFULLY ONTO A FLAT SURFACE.

WARNING

Fingers may be trapped under the TV causing injuries. Hold the TV at the bottom in the middle, and do not allow it to tilt up or down.

WARNING

• The TV may fall causing injuries. Hold the bottom of the stand with your hand and tilt the TV up and down.

• Do not allow children to hang from the TV, place their elbows on the TV or lean against the TV. Doing so may cause the TV to fall over and lead to injuries.

CAUTION

The TV screen may be damaged if the TV is carried as shown in the diagram below.

The TV should always be carried by two people.

3

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 4 Thursday, October 7, 2004 4:42 PM

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit.

Avoid damaging the AC plug and power cord.

When you are not using this unit for a long period of time, it is recommended that you disconnect the power cord from the main outlet.

Pixel defects

LCDs use collections of fine points (“pixels”) to display images. While there is no problem with more than 99.99% of these pixels, please understand that a very small number of pixels may not light, or may light all the time.

Distance recommendations

Avoid improper installation and never position the unit

 

 

 

where good ventilation is impossible.

 

200 mm

200 mm

When installing this TV, distance recommendations

150 mm

 

150 mm

 

 

 

must be maintained between the set and the wall, as well

 

 

50 mm

as inside a tightly enclosed area or piece of furniture.

 

 

 

 

 

Keep to the minimum distance guidelines shown for

 

 

 

safe operation.

 

 

 

Failure to heed the following precautions may result in damage to the TV or remote control.

DO NOT block the TV’s ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

DO NOT place anything on top of the TV.

(such as cosmetics or medicines, flower vases, potted plants, cups, etc.)

DO NOT allow objects or liquid into the cabinet openings.

(If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

DO NOT place any naked flame sources, such as lighted candles, on the TV.

The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.

4

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 5 Thursday, October 7, 2004 4:42 PM

D.I.S.T. demonstration

To start the D.I.S.T. demonstration:

Press the Hbutton to display the menu bar. Then press the yellow button.

A picture split in two (D.I.S.T. turned on and D.I.S.T. turned off) will appear on the screen.

To quit the D.I.S.T. demonstration:

Press the yellow button, TV/DTV button, ppbuttons or any of the number buttons.

NOTE:

Due to static electricity, the TV may be covered with dust.

If this happens, wipe the TV with a soft cloth being careful not to scratch the TV.

Digital terrestrial broadcasting (DVB-T) service area

Although this TV can receive both Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting, depending on the area in which you live, you may not be able to receive Digital terrestrial broadcasting (DVB-T).

For details of the Digital terrestrial broadcasting (DVB-T) service area, refer to the FREEVIEW website etc.

Cleaning the screen

The screen is coated with a special thin film to reduce reflection. If this film is damaged, uneven colours, discolouration, scratches, and other problems that cannot be repaired may occur. Pay attention to the following when handling the screen.

Do not use glue or adhesive tape on the screen.

Do not write on the screen.

Do not allow the screen to come in contact with any hard objects.

Do not allow condensation to form on the screen.

Do not use alcohol, thinner, benzene or other solvents on the screen.

Do not rub the screen hard.

5

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 6 Thursday, October 7, 2004 4:42 PM

CONTENTS

Setting up your TV ...................................

7

Installation..................................................

7

Using the stand ..........................................

7

Removing the terminal covers ...................

8

Connecting the aerial.................................

9

Connecting the power cord to the AC

 

outlet.....................................................

10

Putting the batteries into the remote

 

control...................................................

10

Initial settings ...........................................

10

T-V LINK functions...................................

13

Basic operations (TV) ............................

15

Turn the TV on from standby mode .........

15

Choose a TV channel ..............................

15

Watching images from external devices ....

16

Adjust the volume ....................................

16

Using the Menu........................................

16

Basic operations (Remote control) ......

17

Turn the TV on or off from standby mode ...

18

Choose a TV channel and watch images

 

from external devices ...........................

18

Adjust the volume ....................................

19

ZOOM function.........................................

19

3D SOUND function.................................

21

Operation while watching DTV .............

22

Information function .................................

22

Using the “Multi-picture” function .............

22

Using the Electronic Programme Guide

 

(EPG) ...................................................

23

Displaying the Subtitles............................

25

Digital Teletext function ........................

26

Operation with the DTV menu...............

27

Displaying the DTV menu ........................

27

Timers (DTV Timer Recording)................

27

Configuration............................................

30

Edit PR List ..............................................

32

Installation................................................

34

Common Interface ...................................

35

Operation while watching

 

analogue TV ........................................

36

Information function .................................

36

Using the “Freeze” function......................

37

Using the “Multi-picture” function .............

37

Favourite channel function.......................

38

Analogue teletext function ....................

40

Basic operation ........................................

40

Using the List Mode .................................

41

Hold..........................................................

41

Sub-page .................................................

41

Reveal......................................................

41

Size..........................................................

42

Index ........................................................

42

Cancel......................................................

42

Setting the TV.........................................

43

Basic operation ........................................

43

PICTURE menu ......................................

45

PICTURE MODE......................................

45

BRIGHT-1 ................................................

45

CONTRAST .............................................

45

BRIGHT-2 ................................................

45

SHARP.....................................................

45

COLOUR..................................................

45

HUE..........................................................

45

COLOUR TEMP.......................................

45

FEATURES ..............................................

46

SOUND menu .........................................

49

STEREO / I • II .........................................

49

BASS........................................................

49

TREBLE ...................................................

49

BALANCE ................................................

49

3D SOUND...............................................

49

A.H.B. (Active Hyper Bass) ......................

49

BBE ..........................................................

49

FEATURES menu...................................

50

SLEEP TIMER .........................................

50

CHILD LOCK............................................

50

APPEARANCE.........................................

51

BLUE BACK .............................................

52

FAVOURITE SETTING ............................

52

SET UP menu .........................................

53

AUTO PROGRAM (Analogue) .................

53

EDIT/MANUAL (Analogue) ......................

53

DECODER (EXT-2)..................................

58

COMPONENT AUTO SELECT................

58

EXT SETTING..........................................

59

Displaying a computer screen..............

62

Connecting to the computer .....................

62

Watching images from a computer ..........

62

Table of signals for each type of

 

computer...............................................

62

Additional preparation ..........................

63

Connecting external equipment ...............

63

Operating a JVC brand VCR or DVD

 

player....................................................

66

Troubleshooting ....................................

67

Specifications ........................................

70

6

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 7 Thursday, October 7, 2004 4:42 PM

Setting up your TV

When you install the TV on the wall, only use a JVC wall mounting unit (optional) which is designed for this TV.

Make sure that the TV is installed on the wall by a skilled installer.

Installation

Cautions for installation

Install the TV in a corner on a wall or on the floor so as to keep cords out of the way.

The TV will generate a slight amount of heat during operation. Ensure that sufficient space is available around the TV to allow satisfactory cooling. See “Distance recommendations” on page 4.

Using the stand

This TV comes with a table top stand already attached.

This stand can be used to adjust the direction of the TV screen 5° up, 10° down, and 20° to the left or right.

Tilt the TV up and down:

While holding the bottom of the stand with one hand, use your other hand to hold the middle of the top of the TV and slowly tilt the TV up and down.

• As a safety measure, the stand needs constructed so that it requires a certain amount of force to tilt the TV.

Rotate the TV to the left and right:

While holding the bottom of the stand with one hand, use your other hand to hold the edge of the panel and slowly adjust the direction of the TV screen.

7

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 8 Thursday, October 7, 2004 4:42 PM

Setting up your TV

Cable holder

A cable holder which is used to keep the connection cables tidy is attached to the back of the stand. Gently squeeze the left and right of the cable holder and pull it to remove it from the stand. After putting the cables in the cable holder, attach it to the back of the stand again.

cable holder

Removing the terminal covers

There are connection terminals behind the covers on the left and right of the rear of the TV. Remove these two covers before connecting an antenna or VCR.

Remove the covers by removing the hooks. When replacing the covers, place the side of the covers against the TV and insert the hooks.

Leave the covers off if they do not fit properly. Do not force to replace the covers. Doing so may cause damage to the connection cables and the covers.

8

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 9 Thursday, October 7, 2004 4:42 PM

Setting up your TV

Connecting the aerial

For viewing digital terrestrial signals only, connect the antenna directly to the digital aerial socket.

The connecting cables are not provided.

For further details, refer to the manuals provided with the devices to be connected.

Caution

• Turn off all the equipment including the TV before connecting anything.

If you connect via a device with an

antenna terminal such as a VCR, follow A → B → C in the diagram opposite.

If you connect the antenna directly to the TV, follow 1.

It is possible to view analogue TV & teletext by using the VCR tuner, this can be achieve by switching to the EXT input to which the 21 pin SCART cable linking the TV and VCR is connected.

To connect more equipment, please see “Connecting external equipment” on page 63.

To connect additional audio equipment, see “Connecting speakers/amplifier” on page 66.

When receiving Digital terrestrial broadcasting (DVB-T), reception can suddenly be lost if the signal becomes weak. Use a correctly installed highperformance antenna.

When connecting via a device with an antenna terminal such as a VCR, depending on the connection method, the signal may be weakened. If this happens, use a booster to increase the signal strength.

In areas with a lot of radio communication such as near ports or airports, noise may be introduced into the picture or sound. In such cases, reception may be improved by using a high-performance antenna.

Read the instruction manual of the devices which you connect to the TV.

For viewing digital terrestrial and analogue TV signals, using a two-way signal splitter, connect one output to the digital aerial socket, the other output to the analogue aerial socket.

Aerial

Without terminal covers

75-ohm Coaxial Cable

To digital

 

 

aerial socket

75-ohm

75-ohm

21-pin SCART

Coaxial

Coaxial

Cable

Cable

Cable

To Aerial

 

VCR

 

Input

 

 

To Aerial

 

AV IN/OUT

Output

 

Terminal

 

 

9

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 10 Thursday, October 7, 2004 4:42 PM

Setting up your TV

Connecting the power cord to the AC outlet

Insert the AC plug on the power cord from the TV into an AC outlet. The TV will enter standby mode.

Caution

Operate only from the power source specified (AC 110 – 240 V, 50/60 Hz) on the unit.

Remove the AC plug from the outlet to completely disconnect the TV from the power supply.

Putting the batteries into the remote control

Use two AA/R6 dry cell batteries.

Insert the batteries from the -end, making sure the +and -polarities are correct.

Follow the warnings printed on the batteries.

Battery life is about six months to one year, depending on how much you use the remote control.

The batteries we supply are only for setting up and testing your TV, please replace them as soon as you need to.

If the remote control does not work properly, replace the batteries.

Initial settings

When the TV is first turned on, it goes into the initial settings mode, and you will see the JVC logo. Follow the instructions on the screen display to make the initial settings.

# button

VCR/TV/DVD switch

Blue button

7 buttons

1Make sure to set the VCR/TV/DVD switch on the remote control to the TV position

You cannot turn the TV on when the VCR/TV/DVD switch is set to the VCR or DVD position.

2Press the # button on the remote control

The TV turns on from standby mode and the JVC logo is displayed.

Check that the AC plug on the power cord from the TV is connected to AC outlet.

Remote control sensor

Power lamp

10

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 11 Thursday, October 7, 2004 4:42 PM

Setting up your TV

If the JVC logo does not appear this is because your TV has already been turned on for the first time:

Perform the initial settings with “Installation” (see page 34) in the DTV menu and “AUTO PROGRAM (Analogue)” (see page 53) in the SET UP menu.

3Press the a button

The Digital terrestrial broadcasting (DVB-T) Automatic Search starts. The Digital terrestrial broadcasting

(DVB-T) channels which can be received are automatically registered.

In Ireland and some parts of the UK, Digital terrestrial broadcasting (DVB-T) cannot be received.

If you are in these areas, continue to step 4.

Installation > Automatic Search

Channels:

BBC ONE

BBC TWO

BBC THREE

BBC NEWS 24

BBCi

CBBC Channel

UHF

CH:68

100%

 

BACK Cancel, go to Installation MENU Cancel, go to DTV

D0201-EN

4Press the Hbutton

The COUNTRY menu appears.

> COUNTRY

START

OK

D0003-EK

If you are not connecting the aerial

cable to the analogue aerial socket, press Hbutton to complete the initial setting. Then press TV/DTV button to watch digital broadcasting.

5Press the 5button to choose the country, and then press the blue button

The Analogue terrestrial broadcasting AUTO PROGRAM starts.

The AUTO PROGRAM menu appears and received TV channels are automatically stored in the programme numbers (PR).

>> AUTO PROGRAM

CH 28

14%

OK

When the Automatic Search has finished, the EDIT PR LIST menu appears

1

BBC ONE

 

EDIT PR LIST

 

 

 

 

 

 

 

 

1. BBC ONE

 

 

 

 

 

2. BBC TWO

 

 

 

 

 

7. BBC THREE

 

 

 

 

 

30. CBBC Channel

 

 

 

 

40. BBC NEWS 24

 

 

 

 

51. BBCi

 

 

 

Select

Delete

Edit Name

Lock

Favourites

 

Select function

Select PR

OK Watch PR

More..

D0202-EN

 

 

 

 

 

If you want to, you can now edit the programme numbers (PR) using the EDIT PR LIST function. For details, see “Edit PR List” on page 32.

If you do not want to edit programme numbers (PR), go to the next step.

D0004-EN

To cancel the AUTO PROGRAM function:

Press the TV/DTV button.

After the AUTO PROGRAM has finished, the EDIT menu appears

> EDIT

PR

ID

CH

AV

 

 

01

BBC1

CH 21

02

BBC2

CH 22

03

ITV

CH 23

04

CH4

CH 24

05

CH5

CH 25

06

 

CH 26

07

 

CH 27

08

 

CH 28

09

 

CH 29

 

ID

MANUAL

OK

MOVE

 

 

INSERT

DELETE

D0038-EK

 

 

11

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 12 Thursday, October 7, 2004 4:42 PM

Setting up your TV

If you want to, you can now edit the programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL (Analogue)” on page 53.

If you do not want to edit programme numbers (PR), go to the next step.

6Press the a button to display the

T-V LINK menu

T-V LINK

DOWNLOAD TV RECORDING DEVICE

OK

EXIT

D0005-EN

If you are not connecting the aerial cable to analogue aerial socket, or do not have a T-V LINK compatible VCR connected:

Press the TV/DTV button to exit the T-V LINK menu.

The T-V LINK menu disappears.

If you have a T-V LINK compatible VCR connected to the EXT-2 terminal:

Follow the operating procedure “Downloading the data to VCR” on page 12 to transmit the Programme number (PR) data.

Now, the initial settings are complete, and you can watch the TV

When the COUNTRY setting is UNITED KINGDOM:

The Analogue terrestrial broadcasting channels BBC1, BBC2, ITV, Channel 4 and Channel 5 are automatically set to the programme numbers PR1 to PR5. If the TV doesn’t receive one of these TV channels, that programme number (PR) will not be set. Programme number PR6 is not normally set.

When the COUNTRY setting is IRELAND:

If a TV channel you want to view is not set to a programme number (PR), you can set it manually. To set an Analogue terrestrial broadcasting channel, see “EDIT/MANUAL (Analogue)” on

page 53.

The AUTO PROGRAM function does not set the programme number PR 0 (AV) for your video cassette recorder. You will need to set this using the MANUAL function.

For users in the UK:

If you have any problems setting up your new TV, please call the

Helpline on 0870 330 5000.

For users in the Republic of Ireland:

If you have any problems setting up your new TV, please call the

Helpline on 1890-582500.

Downloading the data to VCR

You can transmit to the latest Analogue terrestrial broadcasting Programme numbers (PR) data to a VCR with the T-V LINK function.

Caution

If the TV’s analogue tuner is not being used, ie. there is no antenna cable connected to the analogue aerial socket, take care not to commence T-V LINK as the VCR programme memory will be erased.

This only works when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV RECORDING DEVICE

OK

EXIT

D0005-EN

1Turn on the VCR

2Press the a button

The data transmission begins.

TV RECORDING DEVICE

TRANSFER. . . . .

D0037-EN

The T-V LINK menu disappears once the data transmission ends.

12

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 13 Thursday, October 7, 2004 4:42 PM

Setting up your TV

When the T-V LINK menu is changed over to another menu:

The TV has finished its menu. This new menu is operated from the VCR. See the VCR instruction manual for what to do next.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu:

Check the following three items. Then press the 2button to retry data transmission.

Has a T-V LINK compatible VCR been connected to the EXT-2 terminal?

Has the VCR power been turned on?

Does the SCART cable that is connected to the EXT-2 terminal to T- V LINK compatible VCR have all its proper connections?

T-V LINK functions

When you have a T-V LINK compatible VCR connected to the EXT-2 Terminal on the TV, it is easier to set up the VCR and to view videos. T-V LINK uses the following features:

To use T-V LINK functions:

A “T-V LINK compatible VCR” means a JVC video cassette recorder with the T-V LINK logo, or with one of the following logos. However, these VCRs may support some or all of the features described earlier. For details, see your VCR instruction manual.

“Q-LINK” (a trademark of Panasonic Corporation)

“Data Logic” (a trademark of Metz Corporation)

“Easy Link” (a trademark of Phillips Corporation)

“Megalogic” (a trademark of Grundig Corporation)

“SMARTLINK” (a trademark of Sony Corporation).

Pre-set download

The VCR will automatically download the registered data on the TV Analogue terrestrial broadcasting channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.

You can also carry out this function using your VCR controls.

When “FEATURE NOT AVAILABLE” is displayed:

If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:

the VCR power is turned on

the VCR is T-V LINK compatible

the VCR is connected to the EXT-2 terminal

the SCART cable is fully wired.

Direct Rec

“What You See Is What You Record”

You can easily record to VCR the images that you are watching on the TV.

For details, read the manual for your VCR. Use your VCR controls. “DEVICE IS RECORDING” is displayed.

You cannot carry out Direct Rec using your TV’s control.

Generally, the VCR cannot record a TV channel that it cannot receive properly on its own tuner, even if you can view that TV channel on the TV. However, some VCRs can record a TV channel by using the TV’s output if that channel can be viewed on the TV. For details, see your VCR instruction manual.

13

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 14 Thursday, October 7, 2004 4:42 PM

Setting up your TV

Do not turn the TV off in the following cases.

when recording images from an external device connected to the TV (for example a camcorder)

when recording a TV channel after it has been unscrambled on a decoder

when recording a TV channel by using the TV’s output because the VCR’s own tuner cannot properly receive that channel.

when recording Digital terrestrial broadcasting (DVB-T).

If you change channels or perform other operations while a Digital terrestrial broadcasting (DVB-T) channel is being recorded, a window appears asking whether to stop the recording.

Press the a button to stop the recording, or the TV/DTV button to continue the recording.

When the VCR is not ready, the following messages are displayed.

ERROR

Cause and

MESSAGE

countermeasure

 

 

NO

The VCR is not able to

RECORDING

record.

 

Check the VCR.

 

 

NO

The TV input is set to EXT-4

RECORDING

or PC. Since the EXT-4

POSSIBLE

picture or PC picture cannot

 

be output to EXT-2, DIRECT

 

REC is not possible.

 

 

NO

The RECORDING DEVICE

RECORDING,

is not ready to record. Check

MEDIA

the VCR tape.

PROBLEM

 

 

 

NO

The RECORDING DEVICE

RECORDING,

cannot record as it is

DEVICE BUSY

recording or playing. Check

 

the VCR.

 

 

Refer to the VCR instruction manual.

14

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 15 Thursday, October 7, 2004 4:42 PM

Basic operations (TV)

1

2

Turn the TV on from standby mode

Press the Abutton or the P p buttons to turn the TV on from standby mode.

When the TV is turned on, the power lamp lights green.

To turn the TV off:

Press the Abutton again. The power lamp goes off.

Caution

3

4

5

6

7 8

1 Remote control sensor

2 Power lamp

3 TV/AV button

4 MENU/OK button

5 P pbuttons

6 r(Volume) qbuttons

7 A(Stand by) button

8 Headphone jack (mini jack)

The Abutton on the TV does not fully isolate the TV from the AC supply. If you are not going to use the TV for a long period, be sure to disconnect the AC plug from the AC socket.

Power lamp condition

Status

 

Power lamp

 

condition

 

 

 

normal

Green

 

when timer is set

Green

On

3 minutes before

Flashing in green

timer starts

 

 

while timer

Green

 

recording in

 

 

progress

 

 

normal

does not light

 

when timer is set

does not light

Standby

3 minutes before

Flashing in Red

timer starts

 

 

while timer

Orange

 

recording in

 

 

progress

 

Choose a TV channel

Press the P pbuttons to choose a programme number (PR) or an EXT terminal

The EXT terminal cannot be chosen when watching Digital terrestrial broadcasting (DVB-T).

15

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 16 Thursday, October 7, 2004 4:42 PM

Basic operations (TV)

Watching images from external devices

Press the TV/AV buttons to choose an

EXT terminal

TV mode

 

 

 

 

EXT modes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analogue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

terrestrial

 

 

 

EXT-1

 

 

EXT-2

 

 

 

broadcasting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E1

or

S1

 

 

E2

or

S2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXT-3

 

 

 

 

 

 

 

 

 

 

 

E3

or

S3

 

Digital

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

terrestrial

 

 

 

 

 

 

 

 

 

EXT-4

broadcasting

 

 

 

PC

 

 

 

 

 

 

 

 

 

 

 

(DVB-T)

 

 

 

 

 

 

 

 

 

 

E4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjust the volume

1Press the r(Volume) button once

The volume level indicator appears.

2Press the qbuttons while the volume level indicator is displayed

Using the Menu

Use the MENU/OK button

Refer to “Setting the TV” (see page 43) for details of using the menu.

If the Digital terrestrial broadcasting (DVB-T) picture is unnatural:

Press the TV/AV button and MENU/OK button at the same time. The power will turn off and then on again, after which the picture may appear natural again.

16

JVC LT-32D50SJ, LT-26D50BJ, LT-32D50BJ, LT-26D50SJ User Manual

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 17 Thursday, October 7, 2004 4:42 PM

Basic operations (Remote control)

1

!

 

@

2

 

3

#

4

 

5

$

 

%

6

 

7

^

8

&

9

*

0

(

 

-

 

=

)

~

_

1 Muting button

2 Number buttons

3 Information button

4 Colour button

5 TV/DTV button

6 7buttons

7 g (Text) button

8 ppbuttons

9 VCR/DVD/Teletext control buttons

0 d(Favourite) button - pbuttons

= cbutton ~ 3button

! # (Standby) button @ VCR/TV/DVD switch

# Gbutton

$ Hbutton % a button

^ bbutton

& r(Volume) qbuttons * GUIDE button

( SUBTITLE button

) X(Multi) button

_ f/c(Freeze/Select) button

17

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 18 Thursday, October 7, 2004 4:42 PM

Basic operations (Remote control)

Turn the TV on or off from standby mode

Press the # (standby) button to turn the TV on or off.

When the TV is turned on, the power lamp lights green.

The power can be turned on by pressing the TV/DTV button, ppbuttons or Number buttons.

Use the pp buttons: Press the ppbuttons to

choose the programme number (PR) you want.

For Digital terrestrial broadcasting (DVB- T), if the FAVOURITE setting in the “Edit PR List” (see page 32) has been set, only that programme number (PR) can be chosen.

For Analogue terrestrial broadcasting, an EXT terminal can also be chosen.

To turn the TV on or off, set the VCR/TV/ DVD switch on the remote control to the TV position and press the #button.

If the VCR/TV/DVD switch on the remote control is set to a position other than TV, the TV will not be turned on or off even if the #button is pressed.

Choose a TV channel and watch images from external devices

Switching between Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting.

Press the TV/DTV button.

The broadcasting is switched every time the button is pressed.

Use the number buttons:

Enter the programme number (PR) of the channel using the number buttons.

Example:

PR 6 press 6

PR 12 press 1and 2

PR 123 press 1, 2and 3

Use the AV button:

Press the AV button to choose an EXT terminal.

TV mode

 

 

 

 

EXT modes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analogue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

terrestrial

 

 

 

EXT-1

 

 

EXT-2

 

 

 

broadcasting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E1

or

S1

 

 

E2

or

S2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXT-3

 

 

 

 

 

 

 

 

 

 

 

E3

or

S3

 

Digital

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

terrestrial

 

 

 

 

 

 

 

 

 

EXT-4

broadcasting

 

 

 

PC

 

 

 

 

 

 

 

 

 

 

 

(DVB-T)

 

 

 

 

 

 

 

 

 

 

E4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details, see “S-IN (S-VIDEO input)” on page 59.

If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 48.

If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

This TV set has a function which can automatically change over the input according to a special signal output from an external device. (The EXT-3 terminal does not support this function.)

When EXT-4 is chosen, motion differs according to the “COMPONENT AUTO SELECT” setting in the SET UP menu.

For details, see “COMPONENT AUTO SELECT” on page 58.

18

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 19 Thursday, October 7, 2004 4:42 PM

Basic operations (Remote control)

Since this TV is designed to make full use of the resolution of the original video source, the motion may appear unnatural when the video source is input with progressive-scanning component signals. If this happens, change the output setting of the connected device to interlacescanning component signal output. See the instructions that came with the device for more information.

The PC sound is the same as the EXT-3 sound.

To return to a TV channel:

Press the TV/DTV button, the pp buttons or the number buttons.

To use the programme number PR 0 (AV):

When the TV and VCR are connected only by the aerial cable, choosing the programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL (Analogue)” on page 53. Pressing the Gbutton changes the choice as follows:

TV mode

 

 

 

 

 

 

 

 

EXT modes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Analogue

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXT-2

terrestrial

 

 

PR 0

 

 

 

 

EXT-1

 

 

 

 

 

 

 

broadcasting

 

 

 

 

 

 

E1

or

S1

 

 

E2

or

S2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXT-3

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E3

or

S3

 

Digital terrestrial

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

broadcasting

 

 

 

 

 

 

 

 

 

 

 

 

EXT-4

 

 

 

 

 

 

PC

 

 

 

 

 

 

 

 

 

 

 

 

(DVB-T)

 

 

 

 

 

 

 

 

 

 

 

 

 

E4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The VCR sends its playback image along the aerial cable as an RF (radio frequency) signal.

Also see your VCR instruction manual.

Adjust the volume

Press the rqbuttons to adjust the volume.

The volume level indicator appears and the volume changes as you press the rq buttons.

Muting the sound

Press the l (muting) button to turn off the sound.

Pressing the l(muting) button again restores the previous volume level.

ZOOM function

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.

AUTO:

When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode to 16:9 ZOOM mode or FULL mode according to the WSS signal.

If a WSS signal is not included, the picture is displayed according to the ZOOM mode set with the 4:3 AUTO ASPECT function.

For details of the 4:3 AUTO ASPECT function, see “4:3 AUTO ASPECT” on page 48.

When the AUTO (WSS) mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, press the cbutton and change to another ZOOM mode.

When watching a 16:9 FULL programme with Digital terrestrial broadcasting (DVB-T), the aspect ratio is FULL.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as this is its original shape.

19

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 20 Thursday, October 7, 2004 4:42 PM

Basic operations (Remote control)

PANORAMIC:

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the screen, without making the picture appear unnatural.

This mode may result in information such as headlines or rolling text at the very top or bottom of the screen not being fully viewable on some programmes.

In such cases the picture can be moved up or down using 6keys, alternatively switch to FULL mode.

14:9 ZOOM:

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

16:9 ZOOM:

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

16:9 ZOOM SUBTITLE:

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

FULL:

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fill the wide TV screen.

For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the FULL mode to restore the picture to its original shape.

When you use this TV’s output signal to record a Digital terrestrial broadcasting (DVB-T) 16:9 broadcast, it will be recorded with its picture squeezed into a 4:3 aspect ratio picture.

Use the FULL mode to restore the picture to its original shape when playing the recording.

Choose the ZOOM mode

1Press the cbutton to display the ZOOM menu

ZOOM

AUTO

REGULAR

PANORAMIC

14:9 ZOOM

16:9 ZOOM

16:9 ZOOM SUBTITLE FULL

OK

D0009-EN

2Press the 6buttons to choose a ZOOM mode. Then press the a button

The picture expands and the chosen ZOOM mode is displayed in about 5 seconds.

The ZOOM mode may be automatically changed by the control signal from an external device. When you want to return to the previous ZOOM mode, choose the ZOOM mode again.

Adjusting the visible area of the picture

If subtitles or the top (or bottom) of the picture are cut off, you can adjust the visible area of the picture manually.

1Press the cbutton

The ZOOM menu appears.

2Press the a button to display the

ZOOM mode indicator

The indicator appears.

16 : 9 ZOOM

D0010-EN

3While it is displayed, press the 6 buttons to change the position of the picture

You cannot adjust the visible area in REGULAR or FULL mode.

20

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 21 Thursday, October 7, 2004 4:42 PM

Basic operations (Remote control)

The visible area adjustment is saved even after the TV channel is changed. However, it is cancelled if the following operations are performed.

The power is turned off/on

The ZOOM mode is changed

The X(Multi) button, f(Freeze) button, or g(Text) button is pressed

The TV is switched between TV mode and EXT mode

Some menu displays can be cut off when you move the visible area up or down while watching Digital terrestrial broadcasting (DVB-T).

3D SOUND function

You can enjoy sounds with a wider ambience.

This function does not work for the sound from headphones.

Press the 3button to select one of

3D SOUND modes

HIGH/LOW:

When you listen to stereo sound, please select HIGH or LOW mode.

You can enjoy sound similar to the experience at the theatre.

When you combine the functions of A.H.B. and BBE, you can enjoy more powerful sound.

When you set the 3D SOUND function to HIGH mode, there may be slight volume distortion. If that occurs, please switch to LOW mode. The effect of 3D SOUND functions will be less noticeable, but the volume distortion will be corrected.

MONO:

Select the MONO mode, when you listen to the mono sound.

You can enjoy the sound for a wider audience similar to stereo sound.

OFF:

The 3D SOUND function switches off.

You can choose the 3D SOUND mode with the “SOUND menu” (see page 49).

21

LT-32/26D50BJ/SJ / LCT1703-001B-U / ENGLISH

LT-32&26D50BJSJ_Eng.book Page 22 Thursday, October 7, 2004 4:42 PM

Operation while watching DTV

Information function

When the h(Information) button is pressed, the programme information appears for approximately 1 minute.

ITV News

CH61

41 Now: 13:00-14:00 Steve Scott

13:19 Next: 14:00-14:30 Steve Scott

D0203-EN

When the h(Information) button is pressed while the information is being displayed, the information disappears.

The time display in the programme information uses the time information which is included in the Digital terrestrial broadcasting (DVB-T). Depending on the channel, the time information may not be correct.

Using the “Multi-picture” function

1Press the Xbutton

The “Multi-picture” menu appears.

1

2

12

D0101-EN

2Press the 5buttons and choose 2, then press the a button

1 Choose to return to one screen.

D0102

2 Choose to change to 2-pictures multi.

D0103

2-pictures multi:

Main-

 

 

 

 

 

 

 

 

 

Sub-

 

 

 

 

 

 

 

 

 

picture

 

 

 

 

 

 

 

 

picture

 

 

 

 

 

 

 

 

 

 

 

D0056

With 1125i and 750p signals, the screen is split into two as shown below.

Mainpicture (16:9)

12

D0104

Sub-

picture

D1056

This cannot be chosen when watching Digital terrestrial broadcasting (DVB-T).

You can watch Digital terrestrial broadcasting (DVB-T) in the mainpicture. You can watch the Analogue terrestrial broadcasting or EXT picture in the sub-picture.

When watching Digital terrestrial broadcasting (DVB-T) and Analogue terrestrial broadcasting at the same time, spilt the antenna and connect it to both the digital and analogue antenna terminals. (See page 9.)

When the Digital terrestrial broadcasting (DVB-T) in the mainpicture is 16:9 FULL, the main-picture aspect ratio is 16:9.

When set to 2-pictures multi, the mainpicture sound from the TV speaker can

be changed to the sub-picture sound by pressing the cbutton. (The speaker mark moves from the main-picture to the sub-picture.)

The sound changes to the main-picture sound if the cbutton is pressed again. When the headphones are connected, you can listen to the sound from the side at which the headphone mark is displayed. No sound comes from the TV speaker.

Choose the main-picture channel by pressing the ppbuttons. Choose the sub-picture channel by pressing the pbuttons.

The “Multi-picture” function does not work for a PC signal.

22

Loading...
+ 50 hidden pages