JVC HR-J465EK, HR-J260EK, HR-J265ES, HR-J265EK User Manual

VIDEO CASSETTE RECORDER

HR-J465EK HR-J265EK HR-J260EK HR-J265ES

TV

TV/VCR AUDIO – –:– –

1		2	3
			2
4		5	6
VPS/PDC	DAILY/QTDN. WEEKLY/HEBDO
7		8	9
0000		AUX
		0	4
START	STOP	DATE	TV
DEBUT	FIN		PROG
1 PROG	?		30 SEC
				DISPLAY
MENU		3	OK
		G +
			STANDBY/ON
TV			TIMER
–
	TV
			REC LINK	TV PROG

PAL

INSTRUCTIONS

CONTENTS
SAFETY FIRST		2
Safety Precautions ......................		2
Some Do's And Don'ts ...............		3
QUICK SET UP GUIDE		4
CHECK THE CONTENTS ...........		4
INSTALLATION ..........................		5
AUTO SET UP ............................		6
BASIC OPERATIONS		8
Playback ....................................		8
Recording ................................		10
VIDEO Plus+ Timer
Programming ...........................		12
Express Timer Programming .....		14
ADVANCED OPERATIONS		17
Looking For The Scene
You Want .................................		17
Playback/Recording According
To Tape Characteristics .............		18
Automatic Satellite Programme
Recording ................................		20
Edit To Or From Another Video
Recorder ..................................		22
Edit From A Camcorder ............		23
Playback Picture Adjustment ....		24
Other Functions .......................		25
SUBSIDIARY SETTINGS		28
Video Channel Set ...................		28
Tuner Set ..................................		30
Clock Set..................................		37
VIDEO Plus+ Setup ..................		38
SUBSIDIARY INFORMATION		39
Questions And Answers ...........		39
Troubleshooting .......................		40
Index .......................................		42
SPECIFICATIONS	Back Cover

LPT0180-001A

2SAFETYFIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

IMPORTANT

■Please read the various precautions on p. 2 – 3 of this instruction manual before installing or operating the recorder.

■It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

IMPORTANT

Connection to the mains supply in the United Kingdom. DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain a proper safety approved extension lead/adapter or consult your dealer.

In the unlikely event of the plug fuse failing be sure to replace the fuse only with an identical approved type, as originally fitted, and to replace the fuse cover. If the fuse fails again consult your nearest JVC dealer.

If nonetheless the mains plug is cut off remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

DO NOT make any connection to the Larger Terminal coded E or Green.

The wires in the mains lead are coloured in accordance with the following code:

Blue to N (Neutral) or Black

Brown to L (Live) or Red

If these colours do not correspond with the terminal identifications of your plug, connect as follows:

Blue wire to terminal coded N (Neutral) or coloured Black. Brown wire to terminal coded L (Live) or coloured Red.

If in doubt — consult a competent electrician.

PAL

■Cassettes marked "VHS" (or "S-VHS") can be used with this video recorder. However, only VHS recordings can be made and played back.

■HQ VHS is compatible with existing VHS equipment.

■VIDEO Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under license from Gemstar Development Corporation.

CAUTION

■When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

■Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating

current on and off. " " shows electrical power standby and " " shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or interrupted. Be sure to contact your nearest JVC dealer if such troubles occur.

3

Some Do's And Don'ts On The Safe

Use Of Equipment

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturer's instructions. Switch off and withdraw the mains plug when making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DON'T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any way — switch off, withdraw the mains plug and consult your dealer.

DON'T remove any fixed cover as this may expose dangerous voltages.

DON'T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off using the switch on the equipment and make sure that your family knows how to do this. Special arrangements may need to be made for infirm or handicapped people.

DON'T use equipment such as personal stereos or radios so that you are distracted from the requirements of road safety. It is illegal to watch television whilst driving.

DON'T listen to headphones at high volume, as such use can permanently damage your hearing. DON'T obstruct the ventilation of the equipment, for example with curtains or soft furnishings. Overheat-

ing will cause damage and shorten the life of the equipment.

DON'T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the manufacturer's approved stand or legs with the fixings provided according to the instructions.

DON'T allow electrical equipment to be exposed to rain or moisture.

ABOVE ALL...

—NEVER let anyone especially children push anything into holes, slots or any other opening in the case — this could result in a fatal electrical shock;

—NEVER guess or take chances with electrical equipment of any kind — it is better to be safe than sorry!

4QUICKSETUPGUIDE

Dear Customer,

Thank you for purchasing this JVC Video Cassette Recorder.

Please use this QUICK SET UP GUIDE to help you to set up your video cassette recorder.

STEP

1	CHECK THE CONTENTS
	CHECK ALL THE CONTENTS SHOWN BELOW

DISPLAY

STANDBY/ON

TIMER

REC LINK

TV PROG

Video Cassette Recorder

RF Cable

"AA" Batteries (x 2)

TV

TV/VCR AUDIO – –:– –

1	2	3
		2
4	5	6
VPS/PDC	DAILY/QTDN. WEEKLY/HEBDO
7	8	9
0000	AUX
	0	4
START	STOP DATE	TV
DEBUT	FIN	PROG
	EXPRESS
1 PROG	?	30 SEC

	MENU	3	OK
		TV PR OG +
	V		+
	T
	–		TV
		TV PR OG –

Infrared Remote Control Unit

You are now ready to install your video recorder.

5

STEP

2	INSTALLATION
	CONNECT VIDEO RECORDER TO TV

Place the recorder on a stable, flat surface.

Back of TV

Aerial connector

21-pin AV input connector (SCART)

Mains Power Cord

RF Cable (provided)

21-pin SCART Cable (not provided)

TV Aerial Cable

(not provided)

Make this

connection if your TV has a

21-pin AV input

connector (SCART) in order to reduce the possibility of interference.

And if you are using a stereo TV, you will need this cable in order to enjoy stereo playback of videotapes.

		ENTREE
		ANT. IN
AV2 ENTREE/DECODEUR	AV1 ENTREE/SORTIE	ANTENNE
IN/DECODER	IN/OUT	SORTIE
		RF OUT

Back of Recorder

Mains outlet

RF CONNECTION

To Connect To A TV With NO 21-pin AV input connector (SCART) . . .

1– Disconnect the TV aerial cable from the TV.

2– Connect the TV aerial cable to the ANT. IN jack on the rear panel of the recorder.

3– Connect the provided RF cable between the RF. OUT jack on the rear panel of the recorder and the TV’s aerial connector.

AV CONNECTION

To Connect To A TV With 21-pin AV input connector (SCART) . . .

1– Connect the aerial, recorder and TV as per “RF CONNECTION”.

2– Connect an optional SCART cable between the AV1 IN/OUT connector on the rear panel of the recorder and the TV’s 21-pin AV input connector (SCART).

ATTENTION

■Do NOT Plug the mains power cord into a mains outlet until all connections are completed.

■Do NOT press the button on the recorder or on the remote control to turn on the recorder's power before you start the Auto Set Up procedure described on page 6.

AFTER YOU FINISH THIS STEP

Go to Step 3 – AUTO SET UP

6		QUICK SET UP GUIDE (cont.)
STEP	3	AUTO SET UP
		SET THE TUNER CHANNELS, CLOCK, GUIDE PROGRAM NUMBERS AND VIDEO CHANNEL*

The Auto Set Up function sets the tuner channels, clock, VIDEO Plus+ assigned Guide Program numbers and the video channel* automatically the first time the button on the recorder or on the remote is pressed to turn on the recorder after the mains power cord has been plugged into a mains outlet.

*Useful if you have connected the video recorder to your TV via RF connection ( pg. 5). Video Channel (RF output channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

Before performing the following procedure, make sure that:

■the TV aerial cable is connected to the recorder.

■the mains power cord is plugged into the mains outlet.

■batteries have been installed in the remote control.

	1
	DISPLAY
STANDBY/ON
TIMER
REC LINK	TV PROG

1	2	3
		2
4	5	6
7	8	9	2
	0	4
1	?
		3

3

Press . "Auto" appears on the display panel and

blinks; do NOT press any button on the

recorder or remote control until the display panel shows either the display as illustrated below in item 2 or "– – :– –". Auto Set Up usually takes about 4 – 12

minutes; the duration varies by area.

●If "– – :– –" appears on the display panel, refer to next page.

●If you have connected the video recorder to your TV via both an RF cable and a 21-pin SCART cable (AV connection) and if the TV is turned on and set to its AV mode, the AUTO SET screen will appear.

Beginning

AUTO SET

PLEASE WAIT

0

+

+

+

End

[MENU] : EXIT

● If you have connected the video recorder to your TV via an RF cable only (RF connection) — the channel that is shown on the display panel is your Video Channel.

To view picture signals from the video recorder, set your TV to the Video Channel. — Refer to the instructions supplied with your TV set for how to do this.

Go to item 3 .

●If you have connected the video recorder to your TV via both an RF cable and a 21-pin SCART cable (AV connection) — you do not need the video channel so you have to set the video channel to off.

Press TV PROG – until the display panel shows "_OUT– –" to set the Video Channel to off.

To view picture signals from the video recorder, set your TV to its AV mode.

— Refer to the instructions supplied with your TV set for how to do this.

Go to item 3 .

Press OK to finish Auto Set Up and refer to next page to check the results.

ATTENTION

Once you have performed Auto Set Up, all the stored stations, Guide Program numbers and the video channel remain in the recorder's memory and the recorder will not perform Auto Set Up again. If there is a power cut and the recorder's memory backup expires you only need to reset the clock. ( pg. 37)

If you have moved to a different area, perform each setting as required.

■Video Channel setting (for RF connection users) pg. 28

■Tuner setting pg. 30

■Clock setting pg. 37

If a new station begins broadcasting in your area, perform tuner setting ( pg. 30) and, if necessary, video channel setting ( pg. 28).

NOTES:

●Auto channel set function takes place first; it assigns automatically all receivable stations in your area.

●Auto clock set function sets the clock automatically.

●During auto channel set, the recorder recognizes each station name of the detected stations and stores them in the recorder's memory, then automatically sets the VIDEO Plus+ assigned Guide Program number for those stations according to the broadcast area.

●For RF connection users: The video recorder detects the channels which are not occupied by local stations and selects one channel automatically for your Video Channel that is located in the middle of more than 5 vacant channels.

●If there is power cut or if you press or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted;

be sure to turn off the recorder power once and press to turn the power back on in order to re-start Auto Set Up.

7

Auto Set Up results appear on the display panel

A			When both auto channel set and auto clock set have been completed successfully the
			correct current time will be displayed after the OK button is pressed in item			3	on page 6.
B			When auto channel set has been completed successfully but auto clock set has not, "(PR)1"
			will be displayed after the OK button is pressed in item	3	on page 6.
C			When neither auto channel set nor auto clock set has been completed successfully, "– –:– –"
			will be displayed.

*You can check if the Guide Program numbers have been set correctly when you perform VIDEO Plus+ Timer Programming ( pg. 12); if the correct preset position number is displayed in step 3, this confirms that the Guide Program number for the PlusCode number you enter in step 2 has been set correctly.

A If both auto channel set and auto clock set have been performed successfully:

1Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).

●If station names (ID — pg. 35) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds each time the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change preset positions, or to set or change station names, see pages 32 – 34.

Now you have finished the basic set up and can use your recorder for both playback and recording.

B If auto channel set has succeeded but auto clock set has not:

1Turn on the TV and select its VIDEO channel or AV mode, then make sure that all necessary stations have been stored in the recorder's memory by using the TV PROG button(s).

●If station names (ID — pg. 35) have also been stored in the recorder's memory, the station name will be displayed at the top left corner of the screen for about 5 seconds each time the recorder is tuned to a different station.

●If you want to set the tuner manually such as to add or skip channels, to change preset positions, or to set or change station names, see pages 32 – 34.

2Perform "Clock Set" on page 37.

Now you have finished the basic set up and can use your recorder for both playback and recording.

C If both auto channel set and auto clock set have failed:

1Make sure the TV aerial cable is connected properly to the recorder and turn off the recorder power once, then turn the recorder power back on again.

● The recorder will try Auto Set Up again.

IMPORTANT

■In certain reception conditions, station names may not be stored correctly, and auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly, when you timer-record a TV programme using VIDEO Plus+, the recorder will record a TV programme of a different station. When programming the timer using VIDEO Plus+, be sure to check that the preset position corresponding to the broadcasting station you wish to record has been selected ( pg. 12, "VIDEO Plus+ Timer Programming").

■Your video recorder memorizes all detected stations even if reception of some of them is poor. In these cases picture quality may be poor. To delete those stations which have an unacceptable picture "Delete A Channel" on page 33.

■If any of the above problems occur, refer to pages 32 – 34 to input station names ( "Set Stations") or delete unnecessary stations ( "Delete A Channel"). You can also change station preset positions ( "Change Station Preset Position").

■For RF connection users: In certain reception conditions, the Video Channel may not be set correctly and interference may appear in the TV picture while the recorder's power is on. Set your Video Channel manually. pg. 28, "Video Channel Set".

If you have any difficulty with the above procedures call the JVC Customer Service Hot Line on 0181 208 7654

8BASICOPERATIONS

Playback

Turn on the TV and select the VIDEO channel (or AV mode).

3

				PLAY
		1		DISPLAY
STANDBY/ON
	TIMER
	REC LINK
			REW		FF
		2		STOP/EJECT	2
					4
TV/VCR
	1	2	3
			2
	4	5	6
	7	8	9
		0	4
3	PLAY
		?
2 REW				FF 2
4 STOP		3

Tape Position Indicator

The tape position indicator appears on screen when, from the Stop mode, you press FF, REW or perform an Index Search. The position of “” in relation to “0” (beginning) or “+” (end)

shows you where you are on 0 + the tape.

”O.S.D.” ( pg. 25) must

be set to “ON”, or the

indicator will not appear. Beginning

¡

+ +

1:23:45 REMAIN 2:35

End

NOTE:

Depending on the type of tape used, there may be times when the indication is not correct.

The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme.

1		LOAD A CASSETTE
		Make sure the window side is up, the rear label side is
		facing you and the arrow on the front of the cassette is
		point toward the recorder. Don’t apply too much
		pressure when inserting.
		● The recorder power comes on automatically and the
		counter is reset to 0:00:00.
		● If the record safety tab has been removed, playback
		begins automatically.
		FIND PROGRAMME START
2		POINT
		If the tape is advanced past the start point, press REW.
		To go forward, press FF.
3		START PLAYBACK
		Press PLAY. "BEST" appears blinking in the recorder's
		display panel during automatic tracking ( pg. 18).
		● Playback picture quality of LP recordings will not be
		as high as SP recordings.
4		STOP PLAYBACK
		Press STOP on the remote or STOP/EJECT on the
		recorder’s front panel. Then press STOP/EJECT to
		remove the cassette.

INFORMATION

When using the AV connection ( pg. 5), initiating playback causes the VCR indicator to light and the TV to automatically enter AV mode. To return the TV to TV mode after playback is complete, press TV/VCR so that the VCR indicator turns off.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Usable cassettes

●Compact VHS camcorder recordings can be played on this video recorder. Simply place the recorded cassette into a VHS Cassette Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record and play back regular VHS signals only. It is not possible to play back a recorded Super VHS tape.

ATTENTION

In the search, still, slow-motion or frame-by-frame playback mode,

●the picture will be distorted.

●noise bars will appear.

●there will be loss of colour with a tape recorded in LP mode.

●Please note that on models HR-J265/260EK/265ES the picture may be distorted in these modes.

PLAY

	TV
	PROG	DISPLAY
STANDBY/ON

TIMER

REC LINK

REW	FF
	PAUSE

1	2	3
		2
4	5	6
7	8	9
	0	4

TV PROG

PLAY

?

FF

REW

PAUSE

3

9

High-Speed Search

ACTIVATE HIGH-SPEED SEARCH

1 During playback or still picture, press FF for forward high-speed search, or REW for reverse high-speed search.

To resume normal playback, press PLAY.

NOTE:

For short searches, press and hold FF or REW for more than 2 seconds during playback or still picture. When released, normal playback resumes.

Still Picture/Frame-By-Frame

Playback

1		PAUSE DURING PLAYBACK
		Press PAUSE. If there is vertical jitter, use the TV PROG
		buttons to correct the picture.
		ACTIVATE FRAME-BY-FRAME
2		PLAYBACK
		Press PAUSE. Each time PAUSE is pressed the tape will
	ORadvance one frame.
		Press @or #(4or ¢). Each time one of these
		buttons is pressed the tape will move one frame in the
		direction of the arrow.

To resume normal playback, press PLAY.

Slow Motion

ACTIVATE SLOW-MOTION PLAYBACK

1 During still picture, press and hold PAUSE for 2 seconds, then release. Press and release again to return to still picture.

OR

During still picture, press and hold @or #(4or ¢). Release to return to still picture.

To resume normal playback, press PLAY.

Variable-Speed Search

		ACTIVATE VARIABLE-SPEED
1		SEARCH
		During playback, press @or #(4or ¢).
		● The more times you press, the faster the playback
		picture moves.
		● To decrease speed, press the button for the opposite
		direction.

To resume normal playback, press PLAY.

10BASICOPERATIONS(cont.)

Recording

Turn on the TV and select the VIDEO channel (or AV mode).

					5	PLAY
	1
					DISPLAY
STANDBY/ON
TIMER
REC LINK				TV PROG
	2	TV	PROG	RECORD		STOP/EJECT
					6		5
			4				PAUSE

TV/VCR

2		1	2	3
				2
NUMBER		4	5	6
		7	8	9
			0	4
				TV PROG 2
		1	?	SP/LP 3
				PLAY 4,5
4 RECORD			3	PAUSE 5
	6	STOP

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

LOAD A CASSETTE

1 Insert a cassette with the record safety tab intact (See below).

●The counter is reset to 0:00:00 and the recorder power comes on automatically.

	CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
2 preset you wish to record.
	SET TAPE SPEED
	Press SP/LP ( ). Check the SP/LP indicator on the
	recorder display panel to confirm the selected tape
3 speed.
	● Picture quality of LP recordings will not be as high as
	on SP recordings.
4	START RECORDING
	Press and hold RECORD and press PLAY on the remote
	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of both the
	first SP and the first LP recording after inserting the
	cassette ( pg. 18).
	● You can not change the preset whilst recording is in
	progress. To change the preset, see step 5.
	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.
	● During the Record Pause mode, you can change the
	preset by pressing the TV PROG +/– buttons or the
	NUMBER keys.
	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
	the recorder. Then press STOP/EJECT to remove the
6 cassette.

INFORMATION

When using the AV connection ( pg. 5), you can switch between TV mode and AV mode by pressing TV/VCR.

*Depending on the type of TV used, TV/VCR button does not function as described above.

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

DISPLAY

STANDBY/ON

TIMER
REC LINK	TV PROG

	TV	PROG
		RECORD

– –:– –

1	2	3
		2
4	5	6
7	8	9
0000	0	4

TV PROG

1

?

3

Tape Remaining Time

DISPLAY REMAINING TIME

1 Press DISPLAY (or – –:– –) until the time remaining on the tape appears.

●The display panel shows the tape remaining time with " " displayed.

●By pressing the DISPLAY (or – –:– –) button, you can change the display to show the counter reading, preset position*, clock time or tape remaining time.

*Preset position is not displayed during playback.

NOTE:

Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "– –:– –" may sometimes appear, or the display may blink on occasion.

11

Record One Programme While Watching Another

SELECT PRESET TO WATCH

1 Once recording is in progress, all you need to do is to set the preset controls on the TV for the station you wish to view.

●The programme selected with the TV’s preset controls appears on the TV screen while the one selected with the recorder's TV PROG buttons is recorded on the tape.

Elapsed Recording Time Indication

You can check the exact time of a recording.

1		SET COUNTER DISPLAY
		Press DISPLAY (or – –:– –) until a counter reading
		appears on the dispay panel.
2		RESET COUNTER
		Press 0000 before starting recording or playback.
		● The counter is reset to “0:00:00” and shows the exact
		elapsed time as the tape runs.

Instant Timer Recording (ITR)

This easy method allows you to record for any length of time from 30 mins. to 6 hours (selectable in 30-min. increments), and shuts off the recorder after recording is finished.

START RECORDING

1 Press RECORD on the recorder.

ENGAGE ITR MODE

2 Press RECORD again. "" blinks and “0:30” appears on the front display panel.

SET RECORDING DURATION

3 If you want to record for more than 30 minutes, press RECORD to extend the time. Each press extends recording time by 30 minutes.

NOTE:

You can only perform ITR using the RECORD button on the recorder's front panel.

12BASICOPERATIONS(cont.)

VIDEO Plus+

Timer

Programming

Before performing VIDEO Plus+ Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

	2	1		DAILY
	NUMBER	4
	5 PDC	7	8	9	WEEKLY
					7
			0

STOP+/–

1,6 PROG

	SP/LP	4
3		OK 3,6

With VIDEO Plus+, timer programming is greatly simplified because each TV programme has a corresponding code number which your recorder is able to recognise.

ACCESS VIDEO PLUS+ SCREEN

1	Press PROG.	VIDEO PLUS+
		[0 – 9] =
		[+/–] : EXPRESS PROGRAMING
		[PROG] : EXIT

The front display panel looks like this:

ENTER PLUSCODE NUMBER

	Press the NUMBER keys to	VIDEO PLUS+
	enter the PlusCode
		1 2 3 4 5 6 7 8
	2 number of the programme
	you wish to record.

●If you make a mistake, press and input the

correct number.	[0 – 9] =
	[ ] : DELETE
	[PROG] : EXIT

The PlusCode number you enter appears on the front display panel:

The display panel shows only a 4-digit number.

ACCESS VIDEO PLUS+ PRO-

GRAM SCREEN

	Press OK, and the VIDEO				– P1 –
	Plus+ Program screen			VIDEO PLUS+ 123456789
3 appears (if you’re just				START		STOP
			21:00		= 22:00
	starting out, “P1” appears).			SP	VPS/PDC OFF
	The display panel shows the
				DATE		TV PROG
	programme start time.
			25.12		1
	Pressing	changes the				BBC 1
	display to the programme
				: OK
	stop time, then the date and
	preset position.
		SP

IMPORTANT

Make sure the preset position number you wish to record is displayed; if not, see "VIDEO Plus+ Setup" on page 38 and set the Guide Program number for that PlusCode number correctly.

●If the number you entered is invalid, "ERROR" appears on the screen and "Err" appears on the display panel. Press and input a valid PlusCode number.

●If the "GUIDE PROG SET" screen appears, see "ATTENTION – Regarding Guide Program Number Set" on page 13.

	SET TAPE SPEED
4 Press SP/LP (		) to set the tape speed.
5	SET PDC MODE
	Press PDC to select "ON" or "OFF".
	If "VPS/PDC ON" is displayed on the screen or "VPS/
	PDC" is lit on the display panel, PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/
	PDC" is not lit on the display panel, PDC is set to OFF.
	"PDC Recording" in the column below.
	● VPS (Video Programme System) recording is not
	currently available in the U.K. and not possible with
	this recorder.

RETURN TO NORMAL SCREEN

Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
6 appears.
● Repeat steps 1 – 6 for each additional programme.
ENGAGE RECORDER’S TIMER
MODE
Press	(TIMER). The recorder turns off automatically
7 and	appears on the display panel.

● To disengage the timer, press (TIMER) again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays this way.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes ( pg. 16).

●It is not possible to timer-record a TV programme with a PlusCode number which starts with "0".

13

Satellite Receiver Users

To timer-record a satellite broadcast using VIDEO Plus+: 1 Perform steps 1 – 7.

2 Set the satellite receiver to the appropriate channel before the selected programme begins.

3 Leave the satellite receiver's power on.

ATTENTION

Regarding Guide Program Number Set

"GUIDE PROG SET" appears after performing step 3 if the Guide Program number for the PlusCode number you entered has not been set.

● Press the NUMBER keys or %fito input the preset position number on which your recorder receives that station, then press OK or % to set the Guide Program number. The VIDEO Plus+ Program screen appears.

GUIDE PROG SET

					(Ex.) To timer-record a BBC2
	GUIDE PROG		TV PROG		programme with VIDEO Plus+.
					* If your recorder receives
		2	– –		BBC2 on the preset position
					2, press OK or #after
					entering "2".
	[5] =
	[PROG] : EXIT

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on the screen to tell you that the recording is due to start in 5 minutes.

– WARNING–

TIMER RECORDING TO START SOON

[]

NOTES:

●The warning only appears if you’re not in the Timer mode at the time.

●If this recorder is being used as the player for tape dubbing, the warning screen will be recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .

PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times which you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service only in a very few areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest information. If the channel you intend to record does not offer a PDC service your recorder will not start recording if PDC has been selected. Be sure to set PDC to "OFF" if PDC is not available on your selected channel ( step 5 above).

NOTES:

●PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 IN on your recorder.

●PDC recording is also possible via the AV1 IN/OUT connector.

14BASICOPERATIONS(cont.)

Express Timer

Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

8	1	DAILY
PDC
	4
4		9
	8		WEEKLY
STOP+/	0			10
–
2,3			TV PROG+/– 6
START+/–
1,9 PROG	?	DATE+/		5
		SP/LP	–
			7
	3		OK 9

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

	ACCESS VIDEO PLUS+
	SCREEN
1 Press PROG.
	ACCESS PROGRAMME
	SCREEN
	Press START +/–. (If you’re				– P1 –
	just starting out, “P1”		START				STOP
2 appears.)
			– –:– –		=		– –:– –
			SP			VPS/PDC OFF
			DATE				TV PROG
			– –.– –					– –
		[+/–] =
		[PROG] : EXIT

The front display panel looks like this:

SP

	ENTER PROGRAMME
	START TIME
	Press START +/– to enter					– P1 –
	the time you want			START				STOP
3 recording to start.
				21:00		=		– –:– –
	● Press and hold START			SP			VPS/PDC OFF
	+/– to move in 30-			DATE				TV PROG
	minute increments, or			– –.– –					– –
	press and release
			[+/–] =
	repeatedly to move 1
			[PROG] : EXIT
	minute at a time.

The front display panel looks like this:

SP

ENTER PROGRAMME STOP TIME

4 Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

5 Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)

ENTER PRESET POSITION
Press TV PROG +/– to		– P1 –
enter the preset position
6 corresponding to the	START	STOP
	21:00	= 22:00
broadcasting station you	SP	VPS/PDC OFF
wish to record.
	DATE	TV PROG
	25.12	1
	[+/–] =	BBC 1
	[PROG] : EXIT
SP

7	SET TAPE SPEED
	Press SP/LP ( ) to set the tape speed.
8	SET PDC MODE
	Press PDC to select "ON" or "OFF".
	If "VPS/PDC ON" is displayed on the screen or "VPS/
	PDC" is lit on the display panel, PDC is set to ON.
	If "VPS/PDC OFF" is displayed on the screen or "VPS/
	PDC" is not lit on the display panel, PDC is set to OFF.
	"PDC Recording" in the right column.
	● VPS (Video Programme System) recording is not
	currently available in the U.K. and not possible with
	this recorder.
	RETURN TO NORMAL
	SCREEN
	After confirming all information is correct, press PROG
	or OK. "PROGRAM COMPLETED" appears on the
9 screen for about 5 seconds, then normal screen
	appears.
	● Repeat steps 1 – 9 for each additional programme.
	ENGAGE RECORDER’S
10	TIMER MODE
	Press	(TIMER). The recorder turns off automatically
	and	appears on the display panel.
	● To disengage the timer, press (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes ( pg. 16).

15

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

1 Perform steps 1 – 10. Enter "L-2" for the preset position in step 6.

2 Set the satellite receiver to the appropriate channel before the selected programme begins.

3 Leave the satellite receiver's power on.

PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) is a service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times which you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed from what has been advertised. PDC is currently available nationally on BBC1, BBC2, Ch.4 and Ch.5, except from a few small relay transmitters. Ch.3 operates a PDC service only in a very few areas. All channels intend to offer this service in due course. Check your TV programme listing guide for latest information. If the channel you intend to record does not offer a PDC service your recorder will not start recording if PDC has been selected. Be sure to set PDC to "OFF" if PDC is not available on your selected channel.

( step 8 in the left column).

NOTES:

● Set the start time (PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

● PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 IN/DECODER on your recorder.

● PDC recording is also possible via the AV1 IN/OUT connector.

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on the screen to tell you that the recording is due to start in 5 minutes.

– WARNING–

TIMER RECORDING TO START SOON

[]

NOTES:

●The warning only appears if you’re not in the Timer mode at the time.

●If this recorder is being used as the player for tape dubbing, the warning screen will be recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press .