Files for GR-DVX9
Size:
3.13 Mb
Download

PLAYBACK Advanced Features For Video

 

EN41

START/STOP Button

 

Using Menus For Detailed Adjustment

 

 

 

POWER Switch

The following procedure applies to all except Synchro

 

 

 

 

Comp ( pg. 74, 75).

 

 

 

 

 

 

Set the POWER Switch to “

” while pressing

 

 

 

Lock Button

1 down the Lock Button located on the switch.

 

 

 

 

2 Press theMENU wheel. The Menu Screen appears.

 

 

 

 

 

Rotate the MENU wheel to select the desired function

 

 

 

 

3 icon, and press it. The selected function menu

 

 

 

 

 

appears.

 

 

 

 

 

 

 

Rotate the MENU wheel to select the desired

MENU Wheel

 

 

4 function, and press it to display the Sub Menu.

 

 

 

Rotate the MENU wheel to select the desired

 

 

 

 

 

 

 

 

 

5 parameter and press it. Selection is complete.

 

Display

 

 

 

Rotate the MENU wheel to select “1RETURN” and

1RETURN

 

Menu Screen

 

 

6 press it twice to close the Menu Screen.

V I DEO MENU

 

 

 

 

 

SOUND MODE STEREO

 

 

 

 

 

1 2B I T

MODE

SOUND L

 

 

 

 

 

SYNCHRO

SOUND R

 

 

 

 

 

REC MODE

 

 

 

SOUND MODE

pg. 42.

 

BLANK SRCH

 

 

 

 

 

 

 

COPY

 

GR-DVX10only

 

12BIT MODE

pg. 42.

 

AV / S – V I DEO

 

 

 

 

 

 

 

 

 

 

 

 

 

SYNCHRO

pg. 75.

 

 

 

 

 

 

REC MODE

Allows you to set the video recording

D I SPLAY MENU

 

 

 

mode (SP or LP) depending on your

1RETURN

 

 

 

 

preference ( pg. 11). It is recom-

ON SCREEN

 

 

 

 

mended you use “REC MODE” in the

DATE / T I ME

 

 

MENU

 

OF F

 

 

“VIDEO MENU” when using this

T I ME

CODE

 

 

 

 

ON

 

 

camcorder as a recorder during digital

 

 

 

 

VIDEO

 

dubbing (GR-DVX10only pg. 61, 63).

 

 

 

 

BLANK SRCH

tape ( pg. 43).

 

 

 

 

 

 

Helps find a blank portion of tape when

 

 

 

 

 

 

you want to record from the middle of a

* Each setting is linked with “DISPLAY MENU”,

 

 

ON: Enables dubbing of images recorded

which appears when the Operation Switch is

 

COPY

on a tape to a MultiMediaCard ( pg. 65).

set to “

” ( pg. 29). The parameters are

 

 

OFF: Enables snapshots to be taken

 

 

during video playback.

the same as in the description on pg. 29.

 

 

 

 

 

 

NOTES:

 

 

 

 

AV/S-VIDEO

IN: Enables audio/video signal input

 

 

 

 

(GR-DVX10

from the AV and S-VIDEOconnectors

It is also possible to change the ON SCREEN

 

 

only)

( pg. 61).

 

settings by pressing DISPLAY on the remote

 

 

OUT: Enables audio/video signal output

control (provided).

 

 

 

to a TV, VCR, etc. via the AV and S-

“REC MODE” can be set when the Operation

 

 

VIDEO connectors ( pg. 56 ,60).

Switch is set to “ ” ( pg. 11, 27).

MENU

ON SCREEN*

Makes the camcorder’s indications appear/

If “ON SCREEN” is set to “SIMPLE”, it keeps

 

disappear from the connected TV screen.

the camcorder’s display (except the date,

 

 

 

 

sound mode and tape speed disappear on the

DISPLAY

DATE/TIME*

Makes the date/time appear/disappear

time and time code) from appearing on the

 

connected TV. It also makes the playback

 

 

on the camcorder.

 

camcorder.

 

 

 

TIME CODE*

Makes the time code appear/disappear

 

 

 

 

on the camcorder.

 

 

 

 

 

 

 

 

CONTINUED ON NEXT PAGE

42EN

PLAYBACK Advanced Features For Video (cont.)

Playback Sound

 

During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 41, select “SOUND MODE” or “12BIT MODE” from the Menu Screen and set it to the desired parameter.

 

STEREO

Sound is output on both “L” and “R” channels in stereo.

SOUND MODE

SOUND L

Sound from the “L” channel is output in stereo.

 

 

 

 

SOUND R

Sound from the “R” channel is output in stereo.

 

 

 

 

SOUND 1

Original sound is output on both “L” and “R” channels in stereo.

12BIT MODE

SOUND 2

Dubbed sound is output on both “L” and “R” channels in stereo.

 

 

 

 

MIX

Original and dubbed sounds are combined and output in stereo on

 

 

both “L” and “R” channels in stereo.

 

 

 

:Factory-preset

NOTES:

The “SOUND MODE” setting is available for both 12-bitand16-bitsound. (In previous models’ functions,“12-bit”is called “32 kHz” and“16-bit”is called “48 kHz”.)

The camcorder cannot detect the sound mode in which the recording was made during fast-forwardor rewind. During playback the sound mode is displayed in the upper left corner.

Display

ON SCREEN setting:

 

 

 

For playback sound, tape

DATE/TIME setting:

TIME CODE setting:

speed and tape running.

For date/time.

For time code.

1 2B I T / SOUND1

SP

4

 

2 5 . 1 2

. 0 0

TC 1 2 : 3 4 : 2 4

1 7 : 3 0

Frames*

Seconds

Minutes

*25 frames = 1 second

Rotate the MENU wheel to select “BLANK SRCH”, then press it. The Sub Menu appears.
Rotate the MENU wheel to select “EXECUTE”, then press it.
•“BLANK SEARCH” appears blinking and the camcorder automatically starts reverse or forward shuttle search, then stops at the spot which is about 3 seconds of tape before the beginning of the detected blank portion.

Stop Button (5)

POWER Switch

Lock Button

MENU Wheel

Display

 

 

 

V I DEO MENU

 

 

 

Menu Screen

 

1RETURN

STEREO

 

 

 

 

 

 

SOUND MODE

 

 

 

 

 

 

1 2B I T MODE

SOUND

L

 

 

 

 

SYNCHRO

SOUND R

 

 

 

 

REC MODE

CANCE L

 

 

 

 

 

 

BLANK SRCH

 

 

 

 

 

 

 

 

 

 

COPY

 

EXECUT E

 

 

 

 

 

AV / S – V I DEO

 

 

 

 

 

 

GR-DVX10only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

44

BLANK SEARCH

EN43

Blank Search

Helps you find where you should start recording in the middle of a tape to avoid time code interruption ( pg. 21).

1 Load a tape ( pg. 10) and set thePOWER Switch to “” while pressing down the Lock Button located on the switch.

2 Press theMENU wheel. The Menu Screen appears.

3 Rotate theMENU wheel to select “”, then press it. “VIDEO MENU” appears.

4

5

To cancel Blank Search midway . . .

.... press 5.

NOTES:

In step 5, if the current position is at a blank portion the camcorder searches in the reverse direction, and if the current position is at a recorded portion the camcorder searches in the forward direction.

Blank Search does not work if “HEAD CLEANING REQUIRED. USE CLEANING CASSETTE” has appeared with the tape.

If the beginning or end of the tape is reached during Blank Search, the camcorder stops automatically.

A blank portion which is shorter than 5 seconds of tape cannot be detected.

The detected blank portion may be located between recorded scenes. Before you start recording, make sure there is no recorded scene after the blank portion.

44EN

PLAYBACK Advanced Features For Video (cont.)

START/STOP Button

POWER Switch

Lock Button

Play/Pause Button (4/6)

Stop Button (5)

E-MAILCLIP REC

Button

Display

E - MA I L CL I P

RECORD I NG

After approx. 20 seconds or when START/STOP is pressed

E - MA I L CL I P

RECORD I NG

Storing is complete

Playback Screen

E - MA I L CL I P

RECORD I NG

COMPLETED

E-MailClip Recording

You can make video clips from recorded video footage and store them in a MultiMediaCard as files which can be conveniently sent via e-mail.

1

Load a MultiMediaCard ( pg. 12) and cassette

( pg. 10). Set the POWER Switch to “

” while

pressing down the Lock Button located on the switch.

2 Press 4/6to start video playback.

3 PressE-MAIL CLIP REC.“E-MAILCLIPSTAND-BY”appears and the camcorder enters theE-MailClipRecord-Standbymode.

4 PressSTART/STOP.“E-MAILCLIP RECORDING ” appears.

•The camcorder stops E-MailClip Recording automatically after approx. 20 seconds, then starts storing the recorded video data in the MultiMediaCard which takes approx. 100 seconds additionally. “COMPLETED” appears when it is complete.

To cancel E-MailClip Recording . . .

.... after step 3, pressE-MAIL CLIP REC again or press 5 to stop video playback.

To view video clips stored in a MultiMediaCard . . .

.... the video clip selected in the E-CLIPIndex Screen

( pg. 47, Index Playback) can be viewed in the LCD monitor or viewfinder; video clips cannot be displayed on a connected TV.

NOTES:

Playback operation cannot be performed during E-MailClip Recording.

If you press START/STOP whileE-MailClip Recording is in progress, only the portion which is recorded beforeSTART/STOP is pressed will be stored in the MultiMediaCard.

Also, if the end of the tape is reached during E-MailClip Recording, that portion will be automatically stored in the MultiMediaCard.

If the end of the tape is reached in step 3, theE-MailClipRecord-Standbymode will be automatically cancelled.

Refer to the instruction manual of the provided software, CardNavigator, Video Player and JVC Video Decoder.

Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored in the MultiMediaCard.

PLAYBACK

 

O

 

XP SU

RE

E

 

T

 

 

H

 

F

G

 

O

I

 

L

 

C

K

 

U

C

 

S

A

 

 

B

 

 

Basic Playback For D.S.C.

EN45

Play Button (4/6)

Normal Playback

 

Fast-ForwardButton (3)

Images shot with the camcorder are automatically

numbered, then stored in numerical order in the

Rewind Button (2)

MultiMediaCard. You can view the stored images, one at a

time, much like flipping through a photo album.

 

Stop Button (5)

1 Load a MultiMediaCard ( pg. 12).

 

 

Set the POWER Switch to “PLAY ” while pressing

 

 

MEMORY

 

POWER Switch

2 down the Lock Button located on the switch. Open

 

 

the LCD monitor fully or pull out the viewfinder fully.

 

Lock Button

•A stored image is displayed.

 

 

 

 

Press 3to display the next image.

 

 

3 Press 2to display the previous image.

[For Normal Playback]

 

Auto Playback

To display the next image

[For Auto Playback]

You can run through all the images stored in memory

 

 

Display

automatically.

I MAGE

100–0010

1 Perform steps1 and2 above.

 

 

 

 

Press 4/6.

 

 

2 •If you press 2during Auto Playback, images are

10 / 24

 

displayed in descending order.

 

 

•If you press 3 during Auto Playback, images are

I MAGE

100–0011

displayed in ascending order.

 

 

3 To end Auto Playback, press 5.

11 / 24

 

NOTES:

 

 

Even if you shoot a new image after playing back a low-

I MAGE

100–0012

numbered one, this will not overwrite an existing image,

because new images are automatically stored after the

 

 

 

 

last-recordedone.

Image number, directory and file names appear if “ON

SCREEN” is set to either “LCD” or “LCD/TV” in the Menu Screen ( pg. 29).

12 / 24

I MAGE

100–0013

 

13 / 24

 

 

Directory and File names

 

 

 

 

 

 

Displays the directory and file names ( pg. 46, 47).

 

 

 

 

 

 

 

 

 

 

Total number of images

 

 

 

 

 

 

 

 

Displays the total number of stored images.

To display the

 

 

 

Image number

 

 

 

 

 

 

Displays the index number of the image file ( pg. 46, 47).

previous image

 

 

 

 

 

 

 

 

 

46EN

PLAYBACK Basic Playback For D.S.C. (cont.)

Type of file

Picture Quality/Size

 

mode: Appears only

Directory and

when displaying still

File names

images

Index number

 

Selected file

 

E X I T

 

I M A G E

VGA

 

100-DVC00003

 

 

0 0 1

F

0 0 2

S

0 0 3

S

0 0 4

F 0 0 5

F

0 0 6

F

Protect icon

POWER Switch

Lock Button

MENU Wheel

Index Screen

The files you stored can be displayed together with their index information. Convenient for checking files stored beforehand, the Index Screen also shows the Picture Quality/Size mode, directory and file names as well as which files are protected against accidental erasure.

100-DVC00003:Directory and File names

Shows that the selected file is in a directory called “100” and its file name is “DVC00003”.

Each time shooting takes place, a file name is made using a number which is larger by one than the largest number of the file names which are in use. If the file name reaches DVC09999, a new directory will be made and the file name will start again from DVC00001.

In the playback screen ( pg. 45), the directory and only the last four digits of the file name are displayed.

001: Index number

Index numbers are marked from 001. For example, when 10 files are stored (index number: 001 to 010), if three files with index numbers 002, 004 and 006 are deleted from memory, the remaining files are automatically moved up to fill any gaps in the numerical sequence. Therefore, the number of remaining files is 7, and the new index numbers range from 001 to 007.

F/S/XGA/VGA: Picture Quality/Size mode

Displays the Picture Quality/Size mode of the stored image. There are 4 modes available: XGA FINE, XGA STD, VGA FINE and VGA STD (in order of quality) ( pg. 13).

: Protect icon

When a file is protected against its accidental erasure, a padlock mark appears next to the index number, and that file cannot be deleted.

Selected File

A file is framed in green when it is selected. Rotate the MENU wheel to move the green frame to the desired file.

INDEX Button

Display

Playback Screen

EN47

Index Playback

You can view or listen to the files (still images, video clips, or sound effects) stored in memory six at a time. Use this mode when looking for a file you wish to view or hear.

1 Perform steps1 and2 of “Normal Playback” on pg. 45.

2 To access the Index Screen, pressINDEX once.

If you press INDEX twice . . .

the Index Screen for E-MailClip Rec ( pg. 44) appears, if a video clip has been stored. (If there is no video clip, this will be skipped.)

If you press INDEX three times . . .

the Index Screen for Digital Sound Effect ( pg. 37) appears. (If there is no sound effect, the display will return to the still image Index Screen.)

3 Rotate theMENU wheel to move the green frame to the desired file and press it. The file selected in the Index Screen is displayed or played back.

Still image

E X I T

I M A G E

VGA

100-DVC00001

0 0 1

0 0 2

0 0 3

0 0 4

0 0 5

0 0 6

Video clip

E X I T

 

E - C L I P

 

 

100-DVC00001

 

 

 

0 0 1

F

0 0 2

S

0 0 3

S

0 0 4

F

0 0 5

F

0 0 6

F

Sound effect

E X I T S O U N D

100-DVC00001

0 0 1

F

0 0 2

S 0 0 3

S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

0 0 4

F

0 0 5

F 0 0 6

F

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

48EN

PLAYBACK Advanced Features For D.S.C.

POWER Switch

MENU Wheel

Display

MEMORY MENU1RETURN

 

 

I MAGE

PRO.

 

 

 

I MAGE

DE L .

 

 

 

SOUND

PRO.

 

 

SOUND

DE L .

 

 

E –CLI P

PRO.

 

 

E –CLI P

DEL .

 

 

FRAME

DE L .

 

 

DPOF

 

 

 

 

FORMAT

 

 

Lock Button

Menu Screen

EXIT

 

PROTECT

 

0 0 1

F

0 0 2

S

0 0 3

S

0 0 4

F

0 0 5

F

0 0 6

F

PROTECT Index

Screen

Padlock mark

Normal playback

If Protection is removed

EXIT

 

PROTECT

 

0 0 1

F

0 0 2

S

0 0 3

S

0 0 4

F

0 0 5

F

0 0 6

F

Normal playback

Protecting Files

The Protect mode helps prevent the accidental erasure of files. When a padlock mark is displayed next to the index number, that file cannot be deleted.

1 Set thePOWER Switch to “MEMORY ” while pressingPLAY

down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

•A stored file is displayed.

2 Press theMENU wheel. The Menu Screen appears. Rotate it to select “” and press it. “MEMORY MENU” appears.

3 By rotating theMENU wheel...

... select “IMAGE PRO.” to access the PROTECT Index Screen.

... select “E-CLIPPRO.” to access theE-ClipRec PROTECT Index Screen.

... select “SOUND PRO.” to access the Sound Effect PROTECT Index Screen.

Then press the MENU wheel.

TO PROTECT A FILE

Before doing the following, perform steps 1 through3 above.

4 Rotate theMENU wheel to move the green frame to the desired file and press it. A “” padlock mark appears on the selected file.

Repeat this procedure for all files you do not wish to delete by accident.

5 Rotate theMENU wheel upward to select “EXIT” and press it. The normal playback screen appears.

NOTE:

When the memory is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.

TO REMOVE PROTECTION

Before doing the following, perform steps 1 through3 above.

4 Rotate theMENU wheel to move the green frame to the desired file and press it. The “” padlock mark located above the file disappears and the file is no longer protected.

Repeat this procedure for all files from which you wish to remove protection.

5 Rotate theMENU wheel upward to select “EXIT” and press it. The normal playback screen appears.

POWER Switch

Lock Button

MENU Wheel

 

 

 

 

Display

 

 

 

EXIT

D E L E T E

 

 

DELETE Index

0 0 1 F

0 0 2 S

0 0 3

S

Screen

0 0 4 F 0 0 5 F

0 0 6 F

 

 

MEMORY MENU

 

Deletion

 

 

 

 

 

 

 

 

Confirmation

CANCEL

 

 

Screen

 

 

 

EXECUTE

 

 

 

CAUTION:

Do not remove the MultiMediaCard or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the MultiMediaCard may be corrupted if the battery becomes exhausted during deletion. If the MultiMediaCard becomes corrupted, initialise it. ( pg. 50)

EN49

Deleting Files

Previously stored files can be deleted either one at a time or all at once.

1 Set thePOWER Switch to “MEMORY ” while pressingPLAY

down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

•A stored file is displayed.

2 Press theMENU wheel. The Menu Screen appears. Rotate it to select “” and press it. “MEMORY MENU” appears.

3 By rotating theMENU wheel...

... select “IMAGE DEL.” to delete images.

... select “E-CLIPDEL.” to deleteE-cliprecording files.

... select “SOUND DEL.” to delete sound effects. Then press the MENU wheel. The Sub Menu appears.

TO SELECT A FILE BY BROWSING FILES STORED IN MEMORY

Before doing the following, perform steps 1 through3 above.

4 Rotate theMENU wheel to select “SELECT” and press it. The DELETE Index Screen appears.

5 Rotate theMENU wheel to move the green frame to the desired file that you wish to delete and press it. An “” appears above the selected file.

Repeat this procedure for all files that you wish to delete. To deselect a file, press the MENU wheel again. The “” disappears.

6 Rotate theMENU wheel upward to select “EXIT” and press it. The Deletion Confirmation Screen appears.

7 Rotate theMENU wheel to select “EXECUTE” and press it. The selected files are deleted and the normal playback screen appears.

To cancel deletion, rotate the MENU wheel to select “CANCEL” and press it.

TO DELETE ALL FILES

Before doing the following, perform steps 1 through3 above.

4 Rotate theMENU wheel to select “ALL” and press it. The Deletion Confirmation Screen appears.

5 Rotate theMENU wheel to select “EXECUTE” and press it. All the files are deleted.

To cancel deletion, rotate the MENU wheel to select “CANCEL” and press it.

NOTES:

Protected files ( pg. 48) cannot be deleted with the above operation. To delete them, remove protection first.

Once files are deleted, they cannot be restored. Check files before deleting.

50EN

POWER Switch

MENU Wheel

Display

MEMORY MENU1RETURN

 

 

I MAGE

PRO.

 

 

I MAGE

DE L .

 

 

SOUND

PRO.

 

 

SOUND

DE L .

 

 

E –CLI P

PRO.

 

 

E –CLI P

DEL .

 

 

FRAME

DE L .

 

 

DPOF

 

 

 

FORMAT

 

MEMORY MENU

MAY ERASE

EX I ST I NG PRE – SET

SOUND E F FECTS

CANCEL

EXECUT E

PLAYBACK Advanced Features For D.S.C. (cont.)

Lock Button

Menu Screen

Confirmation

Screen

Initialising A MultiMediaCard

You can initialise a MultiMediaCard anytime.

After initialising, all images and data stored in the MultiMediaCard, including those which have been protected, are cleared.

1 Set thePOWER Switch to “MEMORY ” while pressingPLAY

down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press theMENU wheel. The Menu Screen appears.

3 Rotate theMENU wheel to select “” and press it. “MEMORY MENU” appears.

4 Rotate theMENU wheel to select “FORMAT” and press it. The Confirmation Screen appears.

5 Rotate theMENU wheel to select “EXECUTE” and press it. The MultiMediaCard is initialised. When initialisation is finished, “NO STORED DATA” appears.

•To cancel initialisation, rotate the MENU wheel to select “CANCEL” and press it.

CAUTION:

Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Power Adapter/Charger, as the MultiMediaCard may be corrupted if the battery becomes exhausted during initialisation. If MultiMediaCard becomes corrupted initialise it.

Rotate the MENU wheel to move the green frame to the desired print frame and press it. Selection is complete. The selected print frame is superimposed over the still image.

PRINT FRAME Button

 

 

 

 

MENU Wheel

 

 

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXIT

FRAME

 

 

 

Print Frame

 

FRAME 5

 

 

 

 

 

0 0 1

0 0 2

0 0 3

 

 

Index Screen

 

 

 

 

 

 

 

 

 

0 0 4

0 0 5

0 0 6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EN51

Superimposing A Print Frame

A selection of print frames are stored in the camcorder. A frame can be superimposed over a still image.

1 Play back an image stored in the MultiMediaCard.

2 PressPRINT FRAME. The Print Frame Index Screen

appears.

3

To Make The Print Frame Disappear . . .

.... press PRINT FRAME.

NOTES:

A print frame created on a PC can be transferred to a MultiMediaCard using the provided software. Transferred print frames are displayed from print frame index number 007, and they can be used together with the print frames in the camcorder’s memory. For details on creating/transferring print frames, refer to the software instructions.

Depending on the images you play back, the print frame outline may become grainy or vague.

52EN

PLAYBACK Advanced Features For D.S.C. (cont.)

POWER Switch

Lock Button

MENU Wheel

 

 

 

 

Display

 

 

 

EXIT

D E L E T E

 

 

DELETE Index

0 1 3 F

0 1 4 F

0 1 5

F

Screen

0 1 6 F 0 1 7 F

0 1 8 F

 

 

MEMORY MENU

 

Deletion

 

 

 

 

 

 

 

 

Confirmation

CANCEL

 

 

Screen

 

 

 

EXECUTE

 

 

 

CAUTION:

Do not remove the MultiMediaCard or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Power Adapter/Charger, as the MultiMediaCard may be corrupted if the battery becomes exhausted during deletion. If the MultiMediaCard becomes corrupted, initialise it. ( pg. 50)

Print Frame Deletion

A print frame created on a PC can be transferred to a MultiMediaCard using the provided software. Print frames that have been transferred to a MultiMediaCard can be deleted when they are no longer needed.

There are 2 ways of deleting previously created print frames: by browsing through print frames individually or by deleting them all at once.

TO SELECT A PRINT FRAME BY BROWSING PRINT FRAMES STORED IN MEMORY

1 Set thePOWER Switch to “MEMORY ” while pressingPLAY

down the Lock Button located on the switch.

2 Press theMENU wheel. The Menu Screen appears.

3 Rotate theMENU wheel to select “” and press it. “MEMORY MENU” appears.

4 Rotate theMENU wheel to select “FRAME DEL.” and press it. The Sub Menu appears.

5 Rotate theMENU wheel to select “SELECT” and press it. The DELETE Index Screen appears.

6 Rotate theMENU wheel to move the green frame to the desired print frame that you wish to delete and press it. An “” appears above the selected print frame.

Repeat this procedure for all print frames that you wish to delete.

To deselect a print frame, press the MENU wheel again. The “” disappears.

7 Rotate theMENU wheel upward to select “EXIT” and press it. The Deletion Confirmation Screen appears.

8 Rotate theMENU wheel to select “EXECUTE” and press it. The selected print frames are deleted and the normal playback screen appears.

•To cancel deletion, rotate the MENU wheel to select “CANCEL” and press it.

NOTES:

If print frames created on a PC have not been transferred to a MultiMediaCard, it is not possible to delete them using these steps.

The print frames in the camcorder’s memory cannot be deleted.

 

 

 

 

EN53

 

POWER Switch

 

TO DELETE ALL PRINT FRAMES

 

 

 

 

1 Perform steps1 through4 on pag. 52.

 

 

 

Lock Button

Rotate the MENU wheel to select “ALL” and press it.

 

 

 

 

2 The Deletion Confirmation Screen appears.

 

 

 

 

Rotate the MENU wheel to select “EXECUTE” and

 

 

 

 

3 press it. All the print frames are deleted.

 

 

 

 

•To cancel deletion, rotate the MENU wheel to select

 

 

 

 

“CANCEL” and press it.

MENU Wheel

 

 

 

Display

 

 

MEMORY

MENU

Menu Screen

 

1RETURN

 

 

I MAGE

PRO.

 

 

 

I MAGE

DE L .

 

 

 

SOUND

PRO.

 

 

 

SOUND

DE L .

 

 

 

E –CLI P

PRO.

 

 

E –CLI P

DEL .

 

 

FRAME DE L . CANCEL

 

 

DPOF

 

AL L

 

 

FORMAT

 

SELECT

 

 

 

 

 

MEMORY MENU

 

Deletion

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Confirmation

 

 

 

 

 

 

 

 

CANCEL

 

Screen

 

 

 

 

 

 

 

 

 

EXECUTE

 

 

 

54EN

POWER Switch

MENU Wheel

Display

MEMORY MENU1RETURN

I MAGE

PRO.

I MAGE

DE L .

SOUND

PRO.

SOUND

DE L .

E –CLI P

PRO.

E –CLI P

DEL . SELECT

FRAME DE L . AL L

DPOF

RESET

FORMAT

 

MEMORY MENU

CANCEL

EXECUTE

PLAYBACK Advanced Features For D.S.C. (cont.)

Setting Print Information (DPOF Setting)

This camcorder is compatible with the DPOF (Digital Print Order Format) standard in order to support future systems such as automatic printing, which records information

Lock Button

about the still images you wish to print (such as the number of prints to make). There are 2 print information settings available: “To print all still images (one print for each)” explained below and “To print by selecting still images and no. of prints” ( pg. 55).

Menu Screen

Confirmation

Screen

TO PRINT ALL STILL IMAGES (ONE PRINT FOR EACH)

1 Set thePOWER Switch to “MEMORY ” while pressingPLAY

down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2 Press theMENU wheel. The Menu Screen appears.

3 Rotate theMENU wheel to select “” and press it. “MEMORY MENU” appears.

4 Rotate theMENU wheel to select “DPOF” and press it. The Sub Menu appears.

5 Rotate theMENU wheel to select “ALL” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate theMENU wheel to select “EXECUTE” and press it. The normal playback screen appears.

•To cancel selection, rotate the MENU wheel to select “CANCEL” and press it.

To Reset The Setting . . .

.... select “RESET” in step 5. The setting is reset to 0 for all still images.

POWER Switch

Lock Button

MENU Wheel

 

 

 

 

 

Display

 

 

E X I T

 

D P O F

VGA

DPOF Screen

100-DVC00021

 

0 1 9

0 0

0 2 0

0 0

0 2 1

0 3

0 2 2

0 0

0 2 3

0 0

0 2 4

0 0

MEMORY MENU

Confirmation

Screen

CANCEL

EXECUTE

EN55

TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS

1 Perform steps1 through4 on pg. 54.

2 Rotate theMENU wheel to selsect “SELECT” and press it. Selection is complete. The DPOF Screen appears.

3 Rotate theMENU wheel to move the green frame to the image you wish to print and press it.

4 Select the number of prints by rotating theMENU wheel towards “+” to increase the number, or towardsto decrease the number and press it. Repeat steps3 and4 for the desired number of prints.

The number of prints can be set up to 15.

To correct the number of prints, select the image again and change the number.

5 Rotate theMENU wheel upward to select “EXIT” and press it. Selection is complete. The Confirmation Screen appears.

6 Rotate theMENU wheel to select “EXECUTE” and press it. The normal playback screen appears.

To cancel selection, rotate the MENU wheel to select “CANCEL” and press it.

To Reset The No. Of Prints . . .

.... select “RESET” in step 5 on pg. 54. The number of prints is reset to 0 for all still images.

CAUTION:

While performing the above, never disconnect power, as this may cause the memory to be corrupted. For safety, all buttons including the POWER Switch are disabled in step5.

NOTES:

If you load a MultiMediaCard already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.

To print images recorded on a tape, first dub them to a MultiMediaCard ( pg. 65).

56EN

CONNECTIONS Basic Connections

These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals.

A.Connection to a TV or VCR equipped with a SCART connector compatible only with regular video signal

 

To TV or VCR

 

 

 

 

TV

Cable Adapter

 

Audio/Video cable

 

 

 

(provided)

White to AUDIO L**

[mini-plugto RCA plug]

To

 

 

(provided)

 

 

 

 

AV OUT

 

 

 

 

 

 

 

 

 

VCR

 

Red to AUDIO R**

 

 

 

 

Set to CVBS

Yellow to VIDEO

 

Connector

 

 

 

 

cover*

 

*When connecting the cables, open this cover.

**The Audio cable is not required for watching still images with the POWER

Switch set to “

MEMORY PLAY

”.

B. Connection to a TV or VCR equipped with a SCART connector compatible with Y/C signal

Docking Station Attachment

1 Align the direction stud and screw on

1

2

the Docking Station with the stud hole

 

 

and tripod mounting socket on the

 

Tripod

camcorder.

 

 

mouting

2 Tighten the screw.

 

socket

• When removing the camcorder, loosen

 

Stud hole

the screw and detach the camcorder.

 

 

Stud

Screw

To TV or VCR

Yellow to VIDEO*

TV

Cable

 

Audio/Video cable

White to AUDIO L**

[RCA plug to RCA

Adapter

 

(provided)

 

plug] (optional)

 

 

 

 

 

Red to AUDIO R**

Red to AUDIO R**

VCR

 

Yellow to VIDEO*

White to AUDIO L**

 

 

 

Set to Y/C

 

 

To

-IN

S-Videocable

To S

 

 

(optional)

 

*Connect when an S-Videocable is not used.

**The Audio cable is not required for watching still images with the POWER

Switch set to “

MEMORY PLAY

”.

Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

EN57

C. Connection to a TV or VCR equipped with an S-VIDEOIN and/or A/V input (RCA type) connectors

* The Audio cable is not required for watching still images with thePOWER Switch set to “

MEMORY PLAY

”.

To TV or VCR

Yellow to VIDEO IN p(

When an S-Video

)[Yellow to VIDEO

cable is not used.

 

 

 

 

 

 

TV

 

 

 

 

White to

Audio/Video cable

White to AUDIO L*

 

AUDIO L IN*

[RCA plug to RCA

 

 

Red to

plug] (optional)

Red to AUDIO R*

VCR

 

AUDIO R IN*

 

 

 

To S-VIDEOIN

S-Videocable

To S

 

 

(optional)

 

1 Make sure all units are turned off.

2 Connect the camcorder to a TV or VCR as shown in the illustration ( pg. 56, 57).

If using a VCR . . . go to step 3. If not . . . go to step 4.

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 41).

• Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen ( pg. 41).

Playback Sound Mode, Tape Speed And Tape Running Displays for video playback

Or

Directory/File Names and Image Number/Total Number of Images for D.S.C. Playback

.... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 41).

Or, press DISPLAY on the remote control.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 7).

When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

To monitor the picture and sound from the camcorder without inserting a tape or

MultiMediaCard, set the camcorder’s POWER Switch to “”, then set your TV to the appropriate input mode.

Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

While the Audio/Video cable is connected to the AV OUT connector, sound cannot be heard from the speaker.

Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Videocable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.

58EN

CONNECTIONS Advanced Connections

PC with DV connector-equippedcapture board

PC

To DV

To

connector

RS-232C

Core filter

PC

connection DV cable*cable

(provided)

Core filter

 

To DV

To PC

OUT

 

Open the

 

connector

 

cover.

 

Connection To A Personal

Computer

This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equippedcapture board installed.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder or Docking Station to your PC using the appropriate cable as shown in the illustration.

•To attach the camcorder to Docking Station, refer to “Docking Station Attachment” on pg. 56.

3 Turn the camcorder’sPOWER Switch to “” while pressing down the Lock Button located on the switch and turn on the PC.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 7).

Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

The date/time information cannot be captured into the PC.

Refer to the instruction manuals of the provided Software.

Also refer to the manufacturer’s instruction manual for the DV connector-equippedcapture board.

*Use the DV cable provided with the capture board.

POWER Switch

Lock Button

POWER Switch

Lock Button

 

Open the

 

connector cover.

 

To DV OUT

 

Core filter

 

DV cable

 

(optional)

 

Core filter

To DV IN

To DV

connector

connector

 

Video unit equipped

 

with a DV input

 

connector

To PC connector

Core filter

Digital Printer

PC connection cable (provided)

To RS-232C

EN59

Connection To A Video Unit Equipped With

A DV Connector

Connection to the GV-DT3Digital Printer (optional) allows you to print out images or transfer them to a PC. It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector. This function is called Digital Dubbing ( pg. 62), which offers virtually no image or sound deterioration.

1 Make sure all units are turned off.

2 Make connections to the device you want to connect to using a DV cable, as shown in the illustration.

3 If necessary, connect the PC connection cable (provided) to the printer’s PC connector and the PC’sRS-232Cconnector.

4 Turn the camcorder’sPOWER Switch to “” while pressing down the Lock Button located on the switch and turn on the other units.

NOTES:

It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack ( pg. 7).

For Digital Dubbing, this camcorder can be connected only to one device at a time. The GR-DVX10can be

used as both a player and a recorder. The GR-DVX9can be used only as a player ( pg. 62, 63).

If Still Playback, Slow-MotionPlayback,Fast-Forwardor Rewind is attempted with the camcorder connected to a video unit via the DV connector, the image will take on an effect similar to a coloured mosaic pattern or it will become black.

Also refer to the instruction manuals of the connected units.

When using a DV cable, be sure to use the optional JVC VC-VDV204UDV cable.

PC

60EN

POWER Switch

Lock Button

 

To S

Red to

Yellow to

AUDIO R

VIDEO*

White to

Core filter

AUDIO L

 

Audio/Video cable

S-Video

[RCA plug to RCA

cable

plug] (optional)

(optional)

To AUDIO,

VIDEO*

and -INconnectors

Cable Adapter (provided)

If your VCR has a

 

“Y/C”/“CVBS”

SCART connector,

 

 

video out

use the provided

 

 

 

 

select switch

cable adapter.

 

 

 

 

 

VCR

TV

* Connect when anS-Videocable is not used.

DUBBING

Dubbing To A VCR

[To use this camcorder as a player]

1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 56 and 57.

2 Set the camcorder’sPOWER Switch to “” while pressing down the Lock Button located on the switch, turn on the VCR’s power, and insert the appropriate cassettes in the camcorder and the VCR.

3 [ForGR-DVX10owners only]

Set “AV/S-VIDEO”to “OUT” in the Menu Screen ( pg. 41).

4 Engage the VCR’s AUX andRecord-Pausemodes.

5 Engage the camcorder’s Play mode to find a spot just before theedit-inpoint. Once it is reached, press 4/6on the camcorder.

6 Press 4/6on the camcorder and engage the VCR’s Record mode.

7 Engage the VCR’sRecord-Pausemode and press 4/6on the camcorder.

8 Repeat steps5 through7 for additional editing, then stop the VCR and camcorder when finished.

NOTES:

When connecting the cables, make sure to connect the ends with a core filter to the camcorder. The core filter reduces interference.

You can use the AV OUT connector on the camcorder for connection.

You can use Playback Zoom ( pg. 68) or Playback Special Effects ( pg. 69) in step 5.

Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.

Set the video out select switch of the cable adapter as required:

Y/C

: When connecting to a TV or VCR which accepts

 

Y/C signals and uses an S-Videocable.

CVBS

: When connecting to a TV or VCR which does not

 

accept Y/C signals and uses an audio/video cable.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

..... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu Screen ( pg. 41).

• Time Code

..... set “TIME CODE” to “ON” or “OFF” in the Menu Screen ( pg. 41).

Playback Sound Mode, Tape Speed And Tape Running Displays

..... set “ON SCREEN” to “LCD” or “SIMPLE” in the Menu Screen ( pg. 41). Or, press DISPLAY on the remote control.