Loading...
GD-463D10U
GD-463D10E
3D LCD MONITOR INSTRUCTIONS
Contents |
|
|
First things first! |
z Safety Precautions............................ |
1 |
Getting started |
z Remote control.................................. |
6 |
|
z Names and functions of parts ........... |
7 |
|
z Getting started................................... |
9 |
Let’s try it out |
z Viewing 3D images ......................... |
11 |
|
z Watching videos / DVDs ................. |
13 |
Try the advanced features |
z Useful functions .............................. |
14 |
Just the way you like it |
z Configuring your remote control...... |
15 |
|
z Customising your monitor ............... |
17 |
|
Picture............................................ |
17 |
|
Features (sub menu)...................... |
18 |
|
Sound............................................. |
19 |
|
Features......................................... |
20 |
|
Set Up ............................................ |
21 |
When you have trouble |
z Troubleshooting .............................. |
23 |
|
z Technical information ...................... |
25 |
|
z Specifications .................................. |
26 |
LCT2574-001A-H
Safety Precautions
CAUTION
RISK OF ELECTRICAL SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock. Do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRIC SHOCK OR FIRE. In order not to defeat the safeguards incorporated into this product, observe the following basic rules for its installation, use, and service. Please read these “IMPORTANT SAFEGUARDS” carefully before use.
zAll the safety and operating instructions should be read before the product is operated.
zThe safety and operating instructions should be retained for future reference.
zAll warnings on the product and in the operating instructions should be adhered to.
zAll operating instructions should be followed.
POWER CONNECTION
The power supply voltage rating of this product is AC 100 V – 240 V.
zThis product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply of your home, consult your product dealer or local electric power company.
1
Note for United Kingdom power cord only
The plug of United Kingdom power cord has a built-in fuse. When replacing the fuse, be sure to use only a correctly rated approved type, re-fit the fuse cover. (Consult your dealer or
qualified personnel.)
How to replace the fuse
Open the fuse compartment with the blade screwdriver, and replace the fuse.
Fuse
zBefore connecting other products such as VCR’s and personal computers, you should turn off the power of this product for protection against electric shock.
zDo not use attachments not recommended by the manufacturer as they may be hazardous.
zWhen replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or equivalents. Unauthorized substitutions may result in fire, electric shock, or other hazards.
zUpon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
Under the following conditions,
1.Turn off the power.
2.Unplug this product from the wall outlet.
3.Refer service to qualified service personnel. a) When the product emits smoke or unusual smell.
b) When the product exhibits a distinct change in performance—for example, no picture or no sound.
c)If liquid has been spilled, or objects have fallen on the product.
d)If the product has been exposed to rain or water.
e)If the product has been dropped or damaged in any way.
f)When the power supply cord or plug is damaged.
zDo not install this product in the following places:
–in a damp or dusty room
–where the product is exposed to soot or steam, such as near the cooking counter or a humidifier
–near heat sources
–where condensation easily occurs, such as near the window
zDo not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product.
The product should be mounted according to the manufacturer’s instructions, and should use a mount recommended by the manufacturer.
zDo not use this product near water.
zBe sure to install the product in the place where proper temperature and humidity are kept (See “Operating conditions” on page 26).
This product becomes hot during its use. Take enough care when handling the product.
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages and other hazards. Refer all service to qualified service personnel.
zDo not use the product for a long time if the sound is distorted.
zNever listen to headphones at high volume, it may damage your hearing.
zMake enough room for inserting or removing the power plug. Place the product as close to an AC outlet as possible. The main power supply for the product is controlled by inserting or removing the power plug.
zWhen the product is left unattended and unused for a long period of time, unplug it from the wall outlet and disconnect the cable system.
zDo not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock.
z Slots and openings in the cabinet are provided for ventilation. These ensure reliable operation of the product and protect it from overheating. These openings must not be blocked or covered.
z Never push objects of any kind into this product through openings as |
|
||
they may touch dangerous voltage points or short-circuit the parts, |
IMPORTANT |
||
which could result in a fire or electric shock. |
|||
z Never spill liquid of any kind on the product. |
|
||
z Never place anything on the product. (Placing liquids, naked flames, |
|
||
cloths, paper, etc. on the product may cause a fire.) |
|
||
z Do not apply any strong shock to the LCD panel. (Do not hit any object |
|
||
PREPARE |
|||
against it or push it with a sharp-pointed tool.) |
|||
|
|||
z Do not put heavy objects on the product. |
|
||
z Do not step on or hang on the product. |
|
||
U.S.A. only |
|
||
|
|||
|
|||
FCC NOTICE (U.S.A. only) |
|
USE |
|
CAUTION: |
|
||
Changes or modifications not approved by JVC could void the user’s |
|
|
|
authority to operate the equipment. |
|
|
|
NOTE: |
|
|
|
|
|||
This equipment has been tested and found to comply with the limits for a |
|
|
|
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits |
|
SETTING |
|
are designed to provide reasonable protection against harmful interference |
|
||
in a residential installation. This equipment generates, uses and can radiate |
|
||
radio frequency energy and, if not installed and used in accordance with the |
|
||
instructions, may cause harmful interference to radio communications. |
|
||
However, there is no guarantee that interference will not occur in a particular |
|
|
|
installation. If this equipment does cause harmful interference to radio or |
|
|
|
television reception, which can be determined by turning the equipment off |
|
|
|
and on, the user is encouraged to try to correct the interference by one or |
|
TROUBLE? |
|
more of the following measures: |
|
||
– Reorient or relocate the receiving antenna. |
|
|
|
– Increase the separation between the equipment and receiver. |
|
|
|
– Connect the equipment into an outlet on a circuit different from that to |
|
|
|
which the receiver is connected. |
|
|
|
|
|||
– Consult the dealer or an experienced radio/TV technician for help. |
|
|
|
2
U.S.A. only
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal of these materials may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities or for USA, the Electronic Industries Alliance: http://www.eiae.org
IMPORTANT SAFETY INSTRUCTIONS
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
Safety Precautions |
3 |
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15)Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
16)Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
17)When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.
18)Avoid improper installation and never position the unit where good ventilation is impossible. When installing this monitor, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation.
|
|
200 (7 7/8) |
|
|
150 (6) |
50 (2) |
150 (6) |
50 (2) |
Unit: mm (inch) |
19)When this monitor is connected to the wall outlet, it is always on standby even when all the LED lamps are not lit. To shut down the monitor, unplug the monitor from the wall outlet.
European Union only
Dear Customer,
This apparatus is in conformance with the valid European directives and standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technical Services Europe GmbH Postfach 10 05 04
61145 Friedberg Germany
Information for Users on Disposal of Old Equipment and Batteries
Products
Battery
Notice:
The sign Pb below the symbol for batteries indicates that this battery contains lead.
[European Union]
These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at its end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in accordance with your national legislation and the Directive 2002/96/EC and 2006/66/EC.
By disposing of these products correctly, you will help to conserve natural resources and will help to prevent potential negative effects on the environment and human health which could otherwise be caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact your local municipal office, your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
[Business users]
If you wish to dispose of this product, please visit our web page http://www.jvc-eu/ to obtain information about the take-back of the product.
[Other Countries outside the European Union]
These symbols are only valid in the European Union.
If you wish to dispose of these items, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical and electronic equipment and batteries.
TROUBLE? SETTING USE PREPARE IMPORTANT
4
Safety Precautions |
5 |
Maintenance
Unplug this product from the wall outlet before cleaning.
Screen
To avoid irreparable change in appearance of the screen such as uneven color, discoloration, scratches, be careful about the following:
zDo not paste or stick anything using any glues or adhesive tapes.
zDo not write anything on the screen.
zDo not strike the screen with a hard object.
zAvoid condensation on the screen.
zDo not wipe the screen with any liquid such as water. In addition, wiping the screen with water-diluted neutral detergent or solvent such as alcohol, thinner, or bezine may affect the anti-reflection treatment of the screen.
zDo not wipe the screen forcefully.
If the screen gets stained, wipe it with a soft dry cloth.
Cabinet
To avoid the deterioration or damages of the cabinet such as its paint's peeling away, be careful about the following:
zDo not wipe the cabinet using solvent such as alcohol, thinner, or benzine.
zDo not expose the cabinet to any volatile substance such as insecticides.
zDo not allow any rubber or plastic in contact for a long time.
zDo not wipe the cabinet forcefully.
Wipe stains off the cabinet with a soft cloth. If the cabinet gets heavily stained, wipe it with a soft cloth soaked in water-diluted neutral detergent and wrung well, then wipe with a soft dry cloth.
See “Handling the glossy finish of the monitor” (P. 8) on how to handle the glossy finish.
Ventilation openings
Use a vacuum cleaner to get rid of the dust around the intakes (all the openings). If a vacuum cleaner is not available, use a cloth and wipe it off. Leaving the dust around the intakes may prevent proper temperature control and cause damage to the product.
Glasses
If the glasses get stained, wipe it with a soft dry cloth.
Remote control
Mute |
Turn on / off (standby) the monitor |
Enter number
Turn on “Clear SD” (P. 18) Switch between “TV / STB / DVD / AUDIO” (P. 15)
Switch between VIDEO devices
Volume control / Turn off muting 
Display current input information
Change the aspect ratio (P. 14)
Turn on “Sound Effect” (P. 14)
z If the remote control doesn’t work, confirm that the mode is set to “TV”.
2%452.
#LEARE3$
|
|
Color buttons |
|
STB |
Display on-screen menu (P. 17) |
|
AUDIO |
|
466)$%/ |
CH |
Select and confirm settings in menus |
|
||
|
VOL |
Change external input |
VOL |
|
|
TOP MENU |
|
To the previous screen |
$)30,!9 |
CH |
MODE
ZOOM
Select a 3D mode (P. 12)
Select a picture mode (P. 14)
LCD |
Note |
z For buttons that can be used to operate other devices, refer to |
|
|
“Configuring your remote control” (P. 15). |
zButtons that are not explained in this manual does not function with this monitor.
TROUBLE? SETTING USE PREPARE IMPORTANT
6
Names and functions of parts
Remote control sensor
Note
Power lamp
ON: Lit (Blue)
OFF: Unlit
zWhen “Power Lamp” is set to “Off”, the power lamp will not light up. g“Power Lamp” (P. 20)
Peel off the protection films pasted on the glossy finish of the monitor after the monitor has been placed properly. (P. 8)
Change the direction of monitor
7
Touch sensor panel operation
Change external
input. Volume
Turn on / off (standby) the monitor.
Menu operation.
Switch to an external input. (P. 13)
zTouching 
and 
simultaneously switches the monitor to 3D mode.
Touch on the function name to operate the function
|
z You will hear a beep if you have touched |
VOL |
the button correctly. |
Operate the menus
Use as “MENU” button or “OK” button.
CH 
Use as “ 
” and “ 
” buttons.
VOL
Use as “ 
” and “ 
” buttons.
zFor details on menu operations, refer to “Customising your monitor” (P. 17).
Attach the stand to the monitor
1
To prevent scratches on the panel, lay a piece of soft cloth on an even platform and place the monitor onto it.
2
Note
z When the stand is not used:
Seal up the two holes at the bottom of the TV using the plates provided. Peel off the protection films on the plates. Then peel the plates from the paper and stick them on the holes.
Handling the glossy finish of the monitor
Be careful when handling the glossy finish of the monitor
The glossy finish of the monitor scratches easily.
zProtection films have been pasted onto the glossy finish of the monitor to prevent scratches. Peel off the films after the monitor has been placed properly.
zIf the glossy finish gets dirty, clear the dust off the glossy finish first. Then wipe softly with the cleaning cloth provided. If you do not clear the dust first, or you wipe the glossy finish too hard, or a cleaning cloth other than the one provided is used, the glossy finish may be scratched.
Glossy finish
TROUBLE? SETTING USE PREPARE IMPORTANT
8
Getting started
Please read P. 10 of this manual to set up your monitor.
Check accessories
Remote control
Cleaning cloth
(For details on using the cleaning cloth, see P. 8.)
Circular polarizing glasses (x2)
(For viewing 3D images)
“AAA/R03” Batteries
(For confirming the monitor works)
WARNING:
Batteries shall not be exposed to excessive heat such as direct sunshine, fire or the like.
zStand, stand cover, screws and plates are also included. For details, refer to page 8.
9
Install your monitor
Follow the instructions on page 8 to attach the stand provided to the monitor.
zPlace the monitor on a flat and stable location.Power requirements
zConnect the power cord only to a 100 - 240 V, 50/60 Hz AC outlet.
Installation requirements
zTo prevent the monitor from falling, thread the belt through the hole on the back of the stand and secure it to the rack, etc.
Hole
Belt and screw (not provided)
Insert the batteries
Use two “AAA/R03” dry cell batteries. Insert the batteries from the - end, making sure the + and - polarities are correct.
Loading...