JVC LYT2202-001A-M, GZ-MS240U, GZ-MS240 User Manual

0 (0)

MEMORY CAMERA

*LYT2202-001A-M*

LYT2202-001A-M

Getting Started

GZ-MS240

Basic User Guide

Dear Customers

Thank you for purchasing this JVC product.

Before use, please read the Safety Precautions and Cautions on P.2 and P.25 to ensure safe use of this product.

This product comes with a “Basic User Guide” (this manual) and a “Detailed User Guide”.

Explains the ways of shooting in various situations and the

Detailed User Guide useful features.

Access the following website on your PC

.

http://manual.jvc.co.jp/index.html/

For Future Reference:

Enter the Model No. (located on the bottom of the camera) and Serial No. (located on the battery pack mount of the camera) below.

Model No.

Serial No.

Information

Copying Playback Recording

Further

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

NOTES:

The rating plate and safety caution are on the bottom and/or the back of the main unit.

The serial number plate is on the battery pack mount.

The rating information and safety caution of the AC adapter are on its upper and lower sides.

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C or incinerate.

Danger of explosion or Risk of fire if the battery is incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material

– special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm (3-15/16") or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

Do not point the lens directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry. There is also a risk of fire or electric shock.

CAUTION!

The following notes concern possible physical damage to this unit and to the user.

Carrying or holding this unit by the LCD monitor can result in dropping the unit, or in a malfunction. Do not use a tripod on unsteady or unlevel surfaces. It could tip over, causing serious damage to the unit.

CAUTION!

Connecting cables (Audio/Video, S-Video, etc.) to this unit and leaving it on top of the TV is not recommended, as tripping on the cables will cause the unit to fall, resulting in damage.

CAUTION:

The mains plug shall remain readily operable.

Remove the mains plug immediately if the camcorder functions abnormally.

WARNING:

The battery pack, this unit with battery installed, and the remote control with battery installed should not be exposed to excessive heat such as direct sunlight, fire or the like.

2

For more information, refer to the Detailed User Guide

http://manual.jvc.co.jp/index.html/

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water. 6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat. 9. Protect the power cord from being walked on

or pinched particularly at plugs, convenience receptacles, and the

point where they exit

from the apparatus. 10. Only use attachments/

accessories specified by the manufacturer.

11. Use only with the cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12. Unplug this apparatus during lightning storms or when unused for long periods of time.

13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

If this symbol is shown, it is only valid in the European Union.

.

Remember that this camcorder is intended for private consumer use only.

Any commercial use without proper permission is prohibited. (Even if you record an event such

as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.)

Trademarks

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Windows® is either registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

Macintosh is a registered trademark of Apple Inc.

iTunes, iMovie, iPhoto are trademarks of Apple Inc., registered in the U.S. and other countries.

YouTube and the YouTube logo are trademarks and/or registered trademarks of YouTube LLC.

Other product and company names included in this instruction manual are trademarks and/or registered trademarks of their respective holders.

CAUTION:

Please do not pull or bend the AC adapter plug and cable. This may damage the AC adapter.

Make a backup of important recorded data

It is recommended to copy your important recorded data to a DVD or other recording media for storage. JVC will not be responsible for any lost data.

For more information, refer to the Detailed User Guide

3

http://manual.jvc.co.jp/index.html/

Index

Safety Precautions ............................

2

Index .................................................

4

Verifying the Accessories ..................

4

Names of Parts and Functions ..........

5

Getting Started ........................

6

Charging the Battery Pack ................

6

Grip Adjustment ................................

7

Inserting an SD card .........................

8

Clock Setting ...................................

10

Recording ..............................

12

Video Recording ..............................

12

Still Image Recording ......................

13

Playback ................................

14

Playing Back/Deleting Files on this Unit

.........................................................

14

Playing Back on TV .........................

15

Copying .................................

16

Copying Files ..................................

16

Dubbing Files by Connecting to a DVD

Recorder or VCR .............................

17

Copying to Computer ......................

18

Further Information ................

21

Using the Menu ...............................

21

Recordable Time/Number of Images

.........................................................

22

Troubleshooting ..............................

23

Cautions ..........................................

25

Specifications ..................................

27

Learning About Advanced Operations

Use the “Detailed User Guide” on your PC to find out more about the advanced operations.

Access the following address on your PC http://manual.jvc.co.jp/index.html/

Verifying the Accessories

AC Adapter

Battery Pack

USB Cable

AV Cable

AP-V30U*

BN-VG107U

(Type A - Mini Type B)

 

 

.

.

.

CD-ROM

Basic User Guide

Core Filter

(this manual)

 

 

 

 

 

 

 

 

.

SD cards are sold separately.

For details on the types of cards that can be used on this unit, refer to P.8.

*When using the AC adapter overseas, please prepare a commercially available converter plug for the country or region of visit.

4

For more information, refer to the Detailed User Guide

http://manual.jvc.co.jp/index.html/

Names of Parts and Functions

1

9 0a

2

 

3

 

4

 

5

 

 

AV

6 78

.

A Lens/Lens Cover

BLight

CStereo Microphone

DLCD Monitor

Turns the power on/off by opening and closing.

ESlider

Selects an image or item.

FOK Button

Confirms the selected image or item.

GOperation Buttons

Functions differently according to the operation.

HMenu (menu) Button ( P.21)

ISpeaker

JACCESS (Access) Lamp

Lights up/blinks during recording or playback.

KPOWER/CHARGE (Power/Charge)

Lamp ( P.6)

L+ (Play) Button

Switches between recording and playback modes.

M/ (Video/Still Image) Button Switches between video and still image modes.

g

 

h

l

i

j

m

k

n

b

 

c

o

d

p

e

q

f

 

NUPLOAD/EXPORT

(Upload/Export to iTunes) Button

Recording Takes videos in YouTube or iTunes format.

Playback Changes the video to YouTube or iTunes format.

O, (Power/Information) Button

Recording Displays the remaining time as well as the battery power during continuous recording.

Playback Displays file information.

Press and hold to turn the power on/off while the LCD monitor is opened.

PAV Terminal ( P.15, P.17)

QZoom/Volume Lever ( P.12, P.14)

RSNAPSHOT (Still Image Recording) Button ( P.13)

SUSB Terminal ( P.20)

TDC Terminal ( P.6)

USTART/STOP (Video Recording)

Button ( P.12)

VLens Cover Switch ( P.12)

WGrip Belt Release Lever

XGrip Belt ( P.7)

YTripod Mounting Hole

ZSD Card Slot ( P.8)

a Battery Release Lever ( P.6)

For more information, refer to the Detailed User Guide

5

http://manual.jvc.co.jp/index.html/

JVC LYT2202-001A-M, GZ-MS240U, GZ-MS240 User Manual

Getting Started

Charging the Battery Pack

1 Attach the battery pack.

*The battery pack is not charged at the time of purchase.

2 Connect the DC

terminal.

Cover

Align the top of the battery with the mark on this unit, and slide in until the battery clicks into place.

To detach the battery pack

(Base)

.

AC Adapter To AC Outlet (110V to 240V)

Charging Lamp

3 Plug in the power.

Charging Lamp

Charging in progress: Blinks

Charging finished: Goes out

CAUTION

Be sure to use JVC battery packs.

If you use any other battery packs besides JVC battery packs, safety and performance cannot be guaranteed.

Charging time: Approx. 1 h 50 m (using supplied battery pack)

*If the battery pack is charged outside the room temperature range of 10°C to 35°C, charging may take a longer time or it may not start.

Attaching the Core Filter to the DC cord

The core filter reduces interference. Connect the end of the cable with the core filter to this unit.

Release the stopper.

3 cm

Wind twice

 

 

 

 

 

 

To be connected

.

to this unit.

6

For more information, refer to the Detailed User Guide

http://manual.jvc.co.jp/index.html/

Grip Adjustment

1 Pull back the belt 2 Adjust the length 3 Attach the belt

.

Using as a Hand Strap

Remove the strap and loop it around your wrist.

While pressing A, pull B and remove the strap.

Press and hold

.

When attaching the hand strap, insert C until it clicks into place.

Information

Copying Playback Recording Getting Started

Further

For more information, refer to the Detailed User Guide

7

http://manual.jvc.co.jp/index.html/

Inserting an SD card

When a commercially available SD card is inserted, recordings can still be made to the card without stopping when the remaining recording time on the built-in memory runs out.

1 Close the LCD monitor.

2 Open the cover.

(Base)

3 Insert an SD card.

 

Label

* Turn o the power of this unit

.before inserting or removing a card.

To remove the card

Push the card inward once, then pull it out straight.

(Base)

.

NOTE

Operations are confirmed on the following SD cards.

Manufacturer

Panasonic, TOSHIBA, SanDisk, ATP

 

 

Video

Class 4 or higher compatible SDHC card (4 GB to 32 GB)

 

 

Still Image

SD card (256 MB to 2 GB), SDHC card (4 GB to 32 GB)

 

 

Using cards other than those specified above may result in recording failure or data loss.

8

For more information, refer to the Detailed User Guide

http://manual.jvc.co.jp/index.html/

To use an SD card

Recording and playback can be performed on a card when “REC MEDIA FOR VIDEO” or “REC MEDIA FOR IMAGE” of media settings is set to “SD CARD”.

Display the menu.

Touch

.

Select “MEDIA SETTINGS” and touch .

VIDEO

 

 

DISPLAY SETTINGS

 

 

CLOCK ADJUST

 

 

BASIC SETTINGS

 

 

CONNECTION SETTINGS

 

 

MEDIA SETTINGS

 

 

SET

?

QUIT

Select “REC MEDIA FOR VIDEO” or “REC MEDIA FOR

IMAGE”, and touch .

MEDIA SETTINGS

 

 

REC MEDIA FOR VIDEO

 

 

REC MEDIA FOR IMAGE

 

 

FORMAT BUILT-IN MEM.

 

 

FORMAT SD CARD

 

 

ERASE ALL DATA

 

 

SET

?

QUIT

Select “SD CARD” and touch .

MEDIA SETTINGS

BUILT-IN MEMORY

5& %#4&

SET ? QUIT

To use SD cards that have been used on other devices

Format (initialize) the card using “FORMAT SD CARD” from media settings.

All data on the card will be deleted when it is formatted. Copy all files on the card to a PC before formatting.

Touch to display the menu.

Select “MEDIA SETTINGS” with the slider and touch .

Select “FORMAT SD CARD” and touch .

MEDIA SETTINGS

 

 

REC MEDIA FOR VIDEO

 

 

REC MEDIA FOR IMAGE

 

 

FORMAT BUILT-IN MEM.

 

 

FORMAT SD CARD

 

 

ERASE ALL DATA

 

 

SET

?

QUIT

Select “FILE” and touch .

FORMAT SD CARD

FILE

FILE + MANAGEMENT NO

SET

? QUIT

.

 

Select “YES” and touch .

After formatting, touch .

Information

Copying Playback Recording Getting Started

Further

For more information, refer to the Detailed User Guide

9

http://manual.jvc.co.jp/index.html/

Clock Setting

1 Open the LCD monitor.

AV

The unit turns on. When the LCD monitor is closed, the unit turns off.

2

Select “YES” and touch

when

“SET DATE/TIME!” is displayed.

 

Select

Slider

 

 

 

SET DATE/TIME!

 

 

 

YES

 

 

 

NO

 

 

 

SET

 

 

 

OK

MENU

.Touch Operation Buttons

Slide along the slider to select, then touch the operation buttons to set.

3 Set the date and time.

Cursor

 

CLOCK SETTING

 

 

 

 

DATE

 

 

TIME

 

 

JAN

1

2009

10

00 AM

.

SET

 

 

 

QUIT

 

 

 

 

 

Use the slider to adjust the year, month, day, hour and minute.

Touch the operation buttons “&” /

“ ” to move the cursor.

4

After setting the date and time,

touch .

 

 

5

Select the region where you live

and touch .

 

 

The city name and time difference is displayed.

CLOCK/AREA SETTING

GMT

JAN. 1. 2009 10:00 AM

SAVE

QUIT

NOTE

Touch the slider and buttons around the screen with your fingers.

The slider and buttons do not function if you touch them with your fingernails or with gloves on.

The displays on the screen do not work even if you touch them.

“SET DATE/TIME!” is displayed when you turn on this unit after it has not been used for a prolonged period.

Charge this unit for more than 24 hours before setting the clock.

( P.6)

10 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/

To reset the clock

Set the clock with “CLOCK ADJUST” from the menu.

Display the menu.

Touch

.

Select “CLOCK ADJUST” and touch .

VIDEO

DISPLAY SETTINGS

CLOCK ADJUST

BASIC SETTINGS

CONNECTION SETTINGS

MEDIA SETTINGS

SET

? QUIT

Select “CLOCK SETTING” and touch .

CLOCK ADJUST

CLOCK SETTING

AREA SETTING

SET FOR DAYLIGHT SAVING TIME

SET

? QUIT

The subsequent setting operations are the same as steps 3 - 5 on the previous page.

To change the display language

The language on the display can be changed.

Display the menu.

Touch

.

Select “DISPLAY SETTINGS”

and touch .

VIDEO

AUTO SWITCH REC MEDIA

DISPLAY SETTINGS

CLOCK ADJUST

BASIC SETTINGS

CONNECTION SETTINGS

SET ? QUIT

Select “LANGUAGE” and touch

.

DISPLAY SETTINGS

LANGUAGE

DATE DISPLAY STYLE

MONITOR BRIGHTNESS

LCD BACKLIGHT

SET ? QUIT

Select the desired language and touch .

Touch .

Information

Copying Playback Recording Getting Started

Further

For more information, refer to the Detailed User Guide

11

http://manual.jvc.co.jp/index.html/

Recording

Video Recording

You can record without worrying about the setting details by using the auto mode.

Before recording an important scene, it is recommended to conduct a trial recording.

1Open the

2 Select

lens cover.

video mode.

Press

4 Start recording.

Press again to stop.

3Check if the recording mode is Auto.

If the mode is Manual,

touch the button to switch.

The mode changes between auto and manual with every touch.

Touch

AV

Zooming

(Wide angle) (Telephoto)

Press

.

Indications during video recording

 

Video Quality

 

 

 

 

 

 

 

 

 

 

 

 

Remaining Recording Time

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Record-Standby

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Scene Counter

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording in Progress

 

 

 

 

 

 

 

 

 

 

 

 

Recording Media

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery Indicator

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE

The estimated recording time of the supplied battery pack is approximately 50 minutes. ( P.22)

12 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/

Reducing Camera Shake (Video Recording)

When the image stabilizer is set, camera shake during recording can be effectively reduced.

 

(White) Image stabilizer

 

(Green) Image stabilizer

Touch

 

 

(White) OFF

The setting switches with every touch.

.

A Reduces camera shake.

B Reduces camera shake at wide angle effectively. It is also effective for recording while walking.

NOTE

It is recommended to set the image stabilizer to off when shooting a subject of little movement with the unit on a tripod.

Complete stabilization may not be possible if camera shake is excessive.

Still Image Recording

1 Select still image mode.

Press

2 Set the focus on the subject.

Press halfway

Lights up in green when focused

3 Take a still image.

Press fully

AV

Lights up during still image recording

.

Indications during still image recording

 

 

 

 

Image Size

Image Quality

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Remaining Number of Shots

 

832

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Shutter Speed

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording in Progress

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Focus

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording Media

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Battery Indicator

 

 

 

 

 

 

 

 

 

 

 

 

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

Copying Playback Recording Getting Started

Further

For more information, refer to the Detailed User Guide

13

http://manual.jvc.co.jp/index.html/

Playback

Playing Back/Deleting Files on this Unit

Select and play back the recorded videos or still images from an index screen (thumbnail display). The contents of the media selected in media settings ( P.9) are displayed on the index screen.

1 Select the playback mode.

Press

2 Select video or still image mode.

Press

3 Play back a file.

Select Media being played back

Volume adjustment during video playback

Turn down

 

Turn up

the volume

 

the volume

 

 

 

 

 

■ To delete unwanted files

Select

8+&'1 2.#;$#%-

8+&'1 2.#;$#%-

 

Touch

Touch

 

 

Select YES when the

 

Touch

 

to stop.

 

 

 

 

 

 

confirmation message

.

 

 

 

appears and touch .

To capture a still image during playback

Pause the playback and press the SNAPSHOT button.

Usable operation buttons during playback

Display

During video playback

During still image playback

/

Playback/pause

Start/pause slideshow

 

 

 

 

Stop (returns to thumbnail display)

Stop (returns to thumbnail display)

 

 

 

 

Advances to the next video

Advances to the next still image

 

 

 

 

Returns to the beginning of the scene

Returns to the previous still image

 

 

 

!

Forward search

-

 

 

 

"

Reverse search

-

 

 

 

$

Forward slow-motion

-

 

 

 

%

Reverse slow-motion

-

 

 

 

14 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/

Playing Back on TV

1 Connect to a TV.

*Refer also to the instruction manual of the TV.

Press the Power button for more than 2 seconds to turn off this unit.

 

 

Video Input

 

 

Yellow

To AV Terminal

 

 

 

Video Input

 

 

White

 

 

Audio Input (L)

AV

 

Red

AV Cable

 

 

 

Audio Input (R)

 

(Provided)

 

Recording Getting Started

AV

TV

.

2 Connect the AC adapter. ( P.6)

This unit powers on automatically when the AC adapter is connected.

3 Select the TV input switch.

Playback

4 Play back a file. ( P.14)

To play back with date/time display

Set “DISPLAY ON TV” in the connection settings menu to “ON”.

Alternatively, set “ON-SCREEN DISPLAY” in the playback menu to “DISPLAY ALL” or “DISPLAY DATE ONLY”.

When images look unnatural on the TV

Images do not appear on the TV

Disconnect the cable and connect again.

properly.

Restart this unit by turning off and on.

 

 

Images are projected vertically

Set “VIDEO OUTPUT” in the connection settings

on the TV.

menu to “4:3”.

 

 

Images are projected

Adjust the TV's screen accordingly.

horizontally on the TV.

 

 

 

NOTE

Please contact the TV manufacturer on questions or problems with setting the TV to the correct mode.

Information

Copying

Further

For more information, refer to the Detailed User Guide

15

http://manual.jvc.co.jp/index.html/

Copying

Copying Files

You can create discs or copy the files on this unit by connecting it to various devices.

Copying files by connecting to a DVD writer is not supported.

Device

 

 

 

Referen

.

 

 

ce Page

 

 

.

 

 

 

 

DVD Recorder

 

 

P.17

Dubbing Files by

3

3

3

.

 

 

 

Connecting to a DVD

VCR

 

 

 

Recorder or VCR

-

-

P.17

3

 

 

.

 

 

 

Copying to PC

-

3*

3

P.18

.

*For details on how to create a disc using a computer, refer to the Detailed User Guide.

16 For more information, refer to the Detailed User Guide http://manual.jvc.co.jp/index.html/

Dubbing Files by Connecting to a DVD Recorder or VCR

You can dub videos in standard quality by connecting to a DVD recorder or VCR. Refer also to the instruction manual of the TV, DVD recorder, VCR, etc.

1 Connect to a VCR/DVD recorder.

Press the Power button for more than 2 seconds to turn off this unit.

 

 

 

Video Input

 

 

 

Yellow

To AV Terminal

 

 

 

 

 

 

Video Input

 

 

 

White

AV

 

 

Audio Input (L)

AV Cable

 

Red

 

 

 

Audio Input (R)

 

(Provided)

 

 

 

 

AC Adapter To AC Outlet

 

 

 

(110V to 240V)

 

 

 

VCR/DVD Recorder

AV

 

 

 

 

 

To DC Terminal

.

This unit powers on automatically when the AC adapter is connected.

2 Select the playback mode.

Press

AV

3 Prepare to record.

Preparation on TV and VCR/DVD recorder

Switch to a compatible external input.

Insert compatible blank DVD or VHS to dub.

Preparation on this unit

Set “VIDEO OUTPUT” in the connection settings menu to the aspect ratio (“4:3” or “16:9”) of the connecting TV.

To include the date during dubbing, set “DISPLAY ON TV” in the connection settings menu to “ON”. Alternatively, set “ON-SCREEN DISPLAY” in the playback menu to “DISPLAY DATE ONLY”.

4 Start recording.

Start playback on this unit ( P.14) and press the record button on the recorder.

After playback is complete, stop the recording.

Information

Copying Playback Recording Getting Started

Further

For more information, refer to the Detailed User Guide

17

http://manual.jvc.co.jp/index.html/

Loading...
+ 39 hidden pages