User Manual
Emerald FT/FL Series LED HDTV
EM32FL |
32” Class |
EM39FT |
39” Class |
EM55FT |
55” Class |
Before operating your LED TV, please read this manual thoroughly.
(*Images shown in this user manual are for illustration purpose only.) |
Rev. 03/14 |
|
Contents
Congratulations on purchasing your new JVC TV. To get the most out of your JVC LED TV, read these instructions before making any adjustments, and retain them for future reference.
For assistance, call the JVC Customer Support and Service Center 1-855-868-1928 or visit our website http://jvc-tv.com/support
We recommend that you register your JVC LED TV either at our website http://jvc-tv.com/support or fill out and mail the Product Registration Card on the back of the manual.
Retain your purchase receipt and write down the model and serial number located at the back of your LED TV for easy reference when obtaining service support.
Serial Number:
Model Number:
|
|
|
|
MHL, Mobile High-Definition Link and the MHL Logo are |
This product qualifies for ENERGY STAR in the |
||
trademarks or registered trademarks of the MHL, LLC. |
“factory default” setting and this is the setting in which |
||
|
power savings will be achieved. Changing the factory |
||
|
default picture setting or enabling other features will |
||
|
increase power consumption that could exceed the |
||
|
limits necessary to qualify for Energy Star rating. |
||
®
HIGH-DEFINITION MULTIMEDIA INTERFACE |
|
The terms HDMI and HDMI High-Definition |
Manufactured under license from Dolby Laboratories. |
Multimedia Interface, and the HDMI Logo are |
Dolby and the double-D symbol are trademarks of |
trademarks or registered trademarks of HDMI |
Dolby Laboratories. |
Licensing LLC in the United States and other countries. |
|
THE TRADEMARKS SHOWN HEREIN ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS; IMAGES USED ARE FOR ILLUSTRATION PURPOSES ONLY. JVC, THE JVC LOGO, AND OTHER JVC TRADEMARKS ARE THE INTELLECTUAL PROPERTY OF JVC KENWOOD Corporation.
PRODUCT SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. © Copyrights 2014 AmTRAN Video Corporation. ALL RIGHTS RESERVED.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To Reduce The Risk Of Electric Shock, Do Not Remove Cover (Or Back). No User-Serviceable Parts Inside. Refer Servicing To Qualified Service Personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY FROM THIS PRODUCT AT TIMES.
CAUTION: TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
WARNING : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example – use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Responsible Party: AmTRAN Video Corporation
Address: 9 Goddard, Irvine, CA 92618 USA
Telephone No: 1-855-868-1926
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Location of the required Marking
The rating sheet and the safety caution are on the rear of the unit.
2
|
Important Safety Instructions |
|
|
|
1) |
Read these instructions. |
|
||
2) |
Keep these instructions. |
|
||
ENGLISH |
||||
3) |
Heed all warnings. |
|||
|
||||
4) |
Follow all instructions. |
|
||
5) |
Do not use this apparatus near water. |
|
||
6) |
Clean only with dry cloth. |
|
||
7) |
Do not block any ventilation openings. Install in accordance with manufacturer’s instructions. |
|
||
8) |
Do not install near any heat sources such as radiators, heat registers, stoves, or other |
|
||
|
apparatus (including amplifiers) that produce heat. |
|
||
9) |
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug |
|
||
|
has two blades with one wider than the other. A grounding-type plug has two blades and a |
|
||
|
third grounding prong. The wide blade or the third prong are provided for your safety. If the |
|
||
|
provided plug does not fit into your outlet, consult an electrician for replacement of the |
|
||
|
obsolete outlet. |
|
||
10) Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15)Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus.
16)An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal.
17)Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.
18)Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.
19)If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
20)When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
21)Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
3
Important Safety Instructions
22)When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner’s manual of the other equipment carefully and follow the instructions when making any connections.
23)Sudden high volume sound may cause hearing or speaker damage. When you use headphones, (if the unit is equipped with a headphone jack) keep the volume at a moderate level. If you use headphones continuously with high volume sound, it may cause hearing damage.
24)Do not allow the product to output distorted sound for an extended period of time. It may cause speaker overheating and fire.
25)This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
26)The socket-outlet must be installed near the unit and easily accessible.
CHILD SAFETY:
It Makes A Difference How and Where You Use TV
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
The home theater entertainment experience is a growing trend and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations.
TVs that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES !
The consumer electronics industry is committed to making home entertainment enjoyable and safe.
TUNE INTO SAFETY
One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use of your TV. Carefully read and understand all enclosed instructions for proper use of this product.
Don’t allow children to climb on or play with furniture and television sets.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger than life”TV. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.
Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious children.
4
Important Safety Instructions
CONDENSATION
Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit’s performance will be impaired. To prevent this, let the unit stand in its new surroundings for
about an hour before switching it on, or make sure that the room temperature rises gradually. Condensation may also form during the summer if the unit is exposed to the breeze from an air conditioner. In such cases, change the location of the unit.
HOW TO HANDLE THE LED PANEL
•Do not press hard or jolt the LED panel. It may cause the LED panel glass to break and injury may occur.
•If the LED panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin inflammation.
•If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.
Possible Adverse Effects on LED Panel:
If a fixed (non-moving) pattern remains on the LED Panel for long periods of time, the image can become permanently engrained in the LED Panel and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or images:
•Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
•Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black bars on left and right sides of screen).
The following symptoms are not signs of malfunction but technical limitation.
•LED Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.
•Do not install the TV near electronic equipment that produces electromagnetic waves. Some equipment placed too near this unit may cause interference.
•Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.
ENGLISH
5
Important Safety Instructions
Television Antenna Connection Protection
External Television Antenna Grounding
If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode.
ANTENNA LEAD IN WIRE
|
GROUND CLAMP |
|
ANTENNA DISCHARGE UNIT |
|
(NEC SECTION 810-20) |
|
GROUNDING CONDUCTORS |
ELECTRIC SERVICE |
(NEC SECTION 810-21) |
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250, PART H)
Lightning Protection
For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits.
6
Important Safety Instructions
DTV Transition Advisory
As of June 12, 2009, all U.S. television stations have switched to digital broadcasting. As a result, owners of analog television sets must connect a digital-to-analog converter box to the television set or subscribe to cable or satellite TV to receive over-the-air TV. Analog-only TVs continue to work as before to receive low power, Class A or translator television stations and with cable and satellite TV services, gaming consoles, VCRs, DVD players, and similar products.
For more information about the DTV transition, visit www.dtv.gov.
FCC’s Consumer Center Email: dtvinfo@fcc.gov
Phone: 1-888-CALL-FCC (1-888-225-5322) Fax: 1-866-418-0232; or writing to:
Mail: Federal Communications Commission
Consumer and Governmental Affairs Bureau Consumer Inquiries and Complaints Division 445 12th Street, SW
Washington, DC 20554
ENGLISH
7
Contents
Contents |
|
Contents....................................................... |
1 |
Important Safety Instructions.................... |
3 |
Television Antenna Connection Protection.... |
6 |
External Television Antenna Grounding.... |
6 |
DTV Transition Advisory......................................... |
7 |
Contents....................................................... |
8 |
Attaching the Stand.................................. |
10 |
Unpacking the TV................................................... |
10 |
Removing the Stand............................................. |
10 |
EM32FL................................................................. |
10 |
EM39FT................................................................. |
10 |
EM55FT................................................................. |
10 |
Package Contents..................................... |
11 |
Remote Control Batteries......................... |
11 |
Parts and Functions.................................. |
12 |
Front Views............................................................... |
12 |
Rear View................................................................... |
12 |
EM32FL................................................................. |
12 |
EM39FT................................................................. |
12 |
EM55FT................................................................. |
13 |
Remote Control....................................................... |
14 |
Making Connections................................. |
15 |
Connecting Antenna / Cable............................. |
15 |
Connecting HD Devices....................................... |
15 |
Connecting External Speakers / Soundbar / |
|
AV Receivers............................................................. |
16 |
Digital Connection........................................... |
16 |
Basic Operations....................................... |
17 |
Setup Wizard............................................................ |
17 |
Exit Store Demo................................................ |
18 |
Basic TV Operation................................................. |
18 |
One button operation (Note:EM32FL and |
|
EM39FT only).......................................................... |
18 |
Changing Channel........................................... |
19 |
Mute Volume...................................................... |
20 |
Set Sleep Timer.................................................. |
20 |
Display Info......................................................... |
20 |
Set Aspect Ratio................................................ |
20 |
Selecting Input Source......................................... |
21 |
Multimedia Mode................................................... |
21 |
Playing Multimedia Files................................ |
21 |
Multimedia: Photo............................................ |
22 |
Audio Only Mode................................................... |
22 |
Wall Mount............................................................... |
23 |
Installing Wall Mount............................................ |
23 |
Wall Mount Specifications (VESA).................... |
23 |
Adjusting the Menu Settings.................... |
24 |
Menu Operation..................................................... |
24 |
Input Menu............................................................... |
25 |
Picture Menu............................................................ |
25 |
Picture Mode...................................................... |
25 |
Backlight.............................................................. |
25 |
Contrast................................................................ |
25 |
Brightness........................................................... |
25 |
Color...................................................................... |
25 |
Tint......................................................................... |
25 |
Sharpness............................................................ |
26 |
Size & Position.................................................... |
26 |
Color Temperature........................................... |
26 |
Advanced Picture............................................. |
26 |
Reset Picture Mode.......................................... |
26 |
Audio Menu.............................................................. |
26 |
Bass........................................................................ |
26 |
Treble.................................................................... |
26 |
Balance................................................................. |
26 |
Lip Sync................................................................ |
27 |
TV Speakers........................................................ |
27 |
Audio Only.......................................................... |
27 |
Digital Audio Out.............................................. |
27 |
Equalizer Settings............................................. |
27 |
Reset Audio Mode............................................ |
27 |
Setup Menu.............................................................. |
27 |
Name Input......................................................... |
27 |
CEC Settings....................................................... |
28 |
Menu Language................................................ |
28 |
Time & Local Settings...................................... |
28 |
Parental Control................................................ |
28 |
Setup Wizard...................................................... |
29 |
System Information......................................... |
29 |
Reset All Settings.............................................. |
29 |
Closed Caption........................................................ |
30 |
Wide............................................................................ |
30 |
Channel Menu......................................................... |
31 |
Select Antenna / Cable................................... |
31 |
Scan Channels................................................... |
31 |
8
Add Channel....................................................... |
32 |
Delete Channel.................................................. |
32 |
Sleep Timer............................................................... |
32 |
Appendix.................................................... |
33 |
Supported Resolution.......................................... |
33 |
Troubleshooting........................................ |
34 |
Specifications............................................ |
35 |
Limited Warranty....................................... |
36 |
ON PARTS AND LABOR................................... |
36 |
Parts and Labor................................................. |
36 |
Type of Service.................................................. |
36 |
Limitations and Exclusions............................ |
36 |
Personal Data..................................................... |
37 |
Important Open Source Software Notice37 |
|
Third Party Application Notice.................... |
37 |
Contents
ENGLISH
9
Attaching the Stand
Removing the Stand
When the TV needs to be transported, remove the stand and pack the TV back in the carton. To remove the stand, perform the assemble steps in reverse order according to your TV model.
Package Contents
Check if the following items are included in your package.
LED TV |
Remote Control |
Batteries |
|
SLEEP |
|
|
U |
|
|
O |
|
|
OK |
|
|
WIDE |
|
|
AU |
|
|
VOL CH |
|
|
MUTE |
|
|
_ |
|
Quick Start Guide |
Power Cord |
|
Quick |
Start |
|
|
|
|
Guide |
|
|
DOWNLOAD FULL VERSION USER MANUAL
http://jvc-tv.com/support
Remote Control Batteries
1 Push the tab, then lift to open the cover. |
3 Close the battery cover. |
ENGLISH
2 Insert the batteries, making sure the [+] and [-] polarities are correct.
Battery Precautions:
Be sure to follow the correct polarity. Incorrect installation may cause battery leakage or damage the remote control. Always replace batteries in pair. Do not combine a used battery with a new one.
Do not use different battery types together (e.g. “Alkaline” and “Carbon-zinc”).
If the remote control is not to be used for a long period of time, remove the batteries to prevent battery leakage.
11
Loading...