JVC DLA-RS4810, DLA-XC5800R, DLA-X75R, DLA-X35, DLA-XC3800 User Manual

...
0 (0)

D-ILA Home Theater Projector

Initial Setup Manual Ver. 1.0 for Using iOS App

This manual describes initial setup to remote control JVC D-ILA projector (hereinafter referred to as the projector) using iPhone, iPod touch and iPad.

Compatible projectors

DLA-X95R, X75R, X55R, X35, XC7800R, XC5800R, XC3800, RS66, RS56, RS4810, RS48, RS46

Operating Conditions

The following conditions are necessary to remote control the projector using iPhone, iPod touch, and iPad.

Compatible iOS device: iPhone 4, iPhone 4S, iPod touch (4th generation), iPad (3rd generation)

Compatible OS: iOS 5.1 (iOS6 is currently under study)

*The app is not compatible with Android OS devices.

*Operability of all functions is not guaranteed.

*In order to remote control the projector from an iOS device (e.g. iPhone, iPad, or iPod touch), it is necessary to first install exclusive app into an iOS device. Exclusive application is available free of charge.

A wireless LAN network environment connected with the projector via wired LAN.

Requirements

Compatible projector

Compatible iOS device

Wireless LAN router* (hereinafter referred to as router), and LAN cable that connects the projector and router.

*A router with DHCP server function.

Procedures for the initial setup

1 Setup an iOS device for use

2 Connection and setup of a D-ILA projector and a router

3 Confirm connection between the projector and iOS device

4 Install iOS app (exclusive application)

5 Confirm connection status between the projector and iOS app

1

JVC DLA-RS4810, DLA-XC5800R, DLA-X75R, DLA-X35, DLA-XC3800 User Manual

1 Setting up an iOS device

A In Settings, switch ON Wi-Fi.

BInside Choose a Network, look for the router in use and select it.

CConnection is complete when the Wi-Fi strength indicator appears at the top next to the signal strength indicator.

Note

Refer to the user manual of router in use for how to select a router, and connection between the router and iOS device. Connection is not possible using 3G or LTE network.

2 Connection and setup of a D-ILA projector and a router

Cable connect the projector to a router for network setup.

Connection image

Wireless LAN

LAN cable

iOS device

Router

AOpen the projector menu. Go to Function Communication Terminal, and choose LAN.

BOpen the projector menu again. Go to Function Network, and turn ON the DHCP Client.

CSelect YES under Set Apply Network Setting?

DAn IP address will be automatically assigned when network setup is successfully achieved. This completes network setup of the projector.

On

2

Loading...
+ 4 hidden pages