JVC AV-21MX76, AV-25MX76, AV-25MX16, AV-25MX56, AV-25MS26 User Manual

0 (0)

COLOUR TELEVISION

EQUALIZER • CINEMA SURROUND • COMPONENT INPUT

 

Contents

 

 

AV-29BS26 AV-29BX16 AV-29MS26 AV-29MX16 AV-29MX56 AV-29MX76 AV-29SS26 AV-29SX56 AV-29SX76

AV-25MS26 AV-25MX16 AV-25MX56 AV-25MX76

AV-21BS26 AV-21BX16 AV-21BX16B AV-21MS26 AV-21MX16 AV-21MX56 AV-21MX76

Knowing your TV’s features .......................................................

3

Remote control buttons and basic functions ..............................

4

TV buttons and functions............................................................

6

Setting up your TV......................................................................

7

Basic setting for picture ..............................................................

9

Advanced setting for picture.....................................................

11

Original features for picture ......................................................

12

Basic setting for sound .............................................................

14

Advanced setting for sound......................................................

15

DVD Menu................................................................................

16

Customized setting...................................................................

17

TV channel presetting ..............................................................

19

Additional preparation ..............................................................

22

Troubleshooting........................................................................

23

Specifications .............................................................

Back cover

INSTRUCTIONS

GGT0116-001A-H

Thank you for buying this JVC colour television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING THE USE OF THIS TV.

1Operate only from the power source indicated on the rear of the TV.

2Avoid damaging the power cord and mains plug. When unplugging the

TV, grasp the mains plug. Do not pull on the power cord.

7This TV can be turned on/off power by connecting/disconnecting the AC plug into AC outlet. While this TV is being installed, enough space should be reserved for connection/disconnecting the AC plug into AC outlet by hand.

8The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

3Never block or cover the ventilation openings.

Never install the TV where good ventilation is unattainable.

When installing this TV, leave spaces for ventilation around the TV of more than the minimum distances as shown.

 

 

15 cm

10 cm

10 cm

15 cm

4Do not allow objects or liquid into the cabinet openings.

5In the event of a fault, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.

WARNING: <AV-21M, AV-25M, AV-29M, AV-21B, AV-29B Series>

YOU CAN DETACH THE PROTECT SHEET ON THE TOP AND BOTTOM OF FRONT FRAME IF YOU NEEDED.

THE FRONT BUTTON DOOR OF THE TV SHOULD BE PULLED OUT FROM ITS BOTTOM. DO NOT PRESS THE UPPER PART, OR YOUR FINGER MAY BE PINCHED.

PULL

PULL

6The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.

2

Knowing your TV’s features

EXIT

1

3 2 4

5

Main features

DVD MENU

Just connect DVD player to the television. The television will detect DVD signal and display

 

picture on the screen automatically and you can adjust pictures and sound while you are

 

watching DVD as your desire. When disconnect DVD player, the television will display the

 

previous channel.

MaxxBass

MaxxBass enhances bass sound that cannot be reproduced by normal speakers to be

 

heard by our ears.

PIP (Picture In Picture)

You can view two screens ( Main picture and Sub picture ) at the same time.

TELETEXT

You can view teletext programmes which are broadcasted by some TV channels. Teletext

 

programme is an infromation in text form.

FAVORITE CH (Channel)

You can register up to four favorite channels for quick recall with one press.

A2/NICAM

You can listen the stereo sound or billingal sound from TV programme broadcasting by A2

(STEREO / I.II)

or NICAM Sound-multiplex system.

AI ECO SENSOR

TV detects the brightness of your room and automatically adjust the picture brightness to

 

a suitable level for a better eyecare.

ECO MODE

You can adjust TV screen contrast according to the brightness of your room to suitable

 

level for a better eyecare.

AI VOLUME

TV adjusts the volume automatically to the same level for all TV channels to avoid sudden

 

change of the volume when selecting different TV channels or selecting Video Mode.

TINT

You can adjust TINT setting for all colour systems, including PAL.

Confirm your TV’s functions

Some functions written in this instruction manual may not be available for your TV.

Please see the chart below and check the functions that are equipped for your TV’s model number.

The model number is indicated at the rear of your TV. When you press a button concerned to a function that is not available for your TV, it does not work and the logo “Ø” appears on the screen.

 

Model No.

AV-29BS26

AV-29BX16

AV-29MX16

AV-29MS26 AV-29SS26

AV-29MX56 AV-29SX56

AV-29MX76 AV-29SX76

AV-25MS26

AV-25MX16

AV-25MX56

AV-25MX76

AV-21BS26

AV-21BX16 AV-21BX16B

AV-21MS26

AV-21MX16

AV-21MX56

AV-21MX76

NO.

Function

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

(STEREO/III)

O

O

O

O

O

2,3

PIP control buttons (Green label)

O

O

O

O

O

O

4,3

TELETEXT control buttons (Black label)

O

O

O

O

O

O

O

O

PICTURE TILT

O

O

O

O

O

O

MaxxBass

O

O

O

O

O

O

O

O

O

O

O

O

5

AI ECO SENSOR

O

O

O

O

O

O

O

O

O

O

O

O

5

ECO MODE

O

O

O

O

3

Remote control buttons and basic functions

No. Press

To

 

1

POWER

Turn on or off the TV from standby mode.

 

 

 

 

 

2

MENU/OK

Display menu and confirm selected function.

 

3

5 / ∞ / 2 / 3

Select and adjust menu function.

 

4

CHANNEL -/+

Select the desired channel number.

8

5

VOLUME -/+

Adjust the volume level.

 

6

TV/VIDEO

Select TV or video terminal input.

2

 

EXIT

On the other hand, you can use this button to EXIT from the menu.

 

7

MUTING

Turn off the volume.

 

 

 

Press this button again to resume the volume.

 

8

DISPLAY

Display the programme number or video terminal number, stereo/bilingual broadcast system and

 

 

/BACK

PR list (channel list) on the screen.

 

 

 

You can select the channel using the PR list.

!

 

 

1 Press the DISPLAY button once to display the PR list.

 

 

 

 

 

2 Press 5 / ∞ / 2 / 3 buttons to choose a channel, then press the MENU/OK button.

4

 

 

You can confirm the favorite channels in the PR list. The channels set to favorite channels are

 

 

 

indicated with coloured mark.

 

1

"

6

EXIT

3

7

9

5

On the other hand, you can use this button to return to the previous menu.

9 0~9, -/--

Select the programme number. For two digits programme number, press -/--, then press the

 

number button.

! RETURN+

a) Return to the frequently view channel with one touch.

 

1

Choose the channel you want to register.

 

2

Press and hold RETURN+ button until “RETURN PLUS PROGRAMMED!” appears.

To cancel, press and hold RETURN+ button until “RETURN PLUS CANCELED!” appears.

b)Return to the previously viewed channel, if you have not set or have cancelled the Return channel as above.

" FAVORITE

Register and recall 4 favorite channels.

CHANNEL

1.

Choose the TV channel you want to register then press and hold a colour button until

(colour buttons: red, “PROGRAMMED! ■" appears.

green, yellow, blue) 2.

To register other favorite channels, repeat step 1.

To recall the favorite channel, press the corresponding colour button.

When the TV is in Text function or MENU mode, the favorite channel function is not available. When the TV is in PIP function, the favorite channel function cannot register but can recall the favorite channel.

4

Remote control buttons and basic functions (continued)

How to operate menus and menus locations

To

Operation

Note

Display the MENU

Press the MENU/OK button 2.

To exit the MENU,

 

PICTURE MENU is displayed on

press the DISPLAY/

 

first press.

BACK button 8 or

 

 

choose EXIT menu

 

 

or TV/VIDEO/EXIT

 

 

button 6.

Choose a Top

Press 2/3 buttons 3 to choose

 

menu

a menu title when the cursor is

 

pointing at MENU.

 

Choose a 2nd

Press 5/∞ buttons 3 to choose a

Press ∞ button 3

menu

2nd menu title.

to display the next

Display the 3rd

Press 5/∞ buttons 3 to choose a

functions.

menu

2nd menu title. Then press MENU/

 

 

OK button 2.

 

Return to the

Press the DISPLAY/BACK button

previous menu

8.

 

Choose the setting

Press 5/∞ buttons 3 to choose

Press the TV/ VIDEO/

of a function

a function. Then press the 2/3

EXIT button 6 to exit

 

buttons 3 to change the setting.

from the menu.

Adjust the effect

Press 5/∞ buttons 3 to choose

 

level of a function

a function. Then press the 2/3

 

 

buttons 3 to adjust the effect

 

 

level.

 

Display the sub

Press the 5/∞ buttons 3 to

 

menu of a function.

choose a function. Then press

 

MENU/OK button 2 to display

 

 

 

the sub menu.

 

The following chart shows locations of functions in menus. In this manual, location of a function is described as follows:

MENU Top menu 2nd menu

MENU

Top menu

2nd menu

3rd menu

Note: Some functions have the 4th menus as the sub-menus.

 

Top menu

2nd menu

Location

3nd menu

Location

MENU

PICTURE

PICTURE MODE

P.9

 

 

PICTURE SETTING

P.10

CONTRAST

P.10

 

 

 

 

BRIGHT

P.10

 

 

 

 

SHARP

P.10

 

 

 

 

COLOUR

P.10

 

 

 

 

TINT

P.10

 

 

WHITE BALANCE

P.10

 

 

VNR

P.17

 

SOUND

STEREO/III

P.15

 

 

AI VOLUME

P.15

 

 

SOUND MODE

P.14

 

 

EQUALIZER

P.15

 

 

BALANCE

P.14

 

 

CINEMA SURROUND

P.15

 

 

MaxxBass

P.15

 

FEATURES

DVD MENU

P.16

AUTO SIGNAL DETECT

P.16

 

 

 

 

DVD PICTURE MODE

P.16

 

 

 

 

DVD THEATER STATUS

P.16

 

 

 

 

DVD SOUND MODE

P.16

 

 

ON TIMER

P.17

PR

P.17

 

 

 

 

ON TIMER

P.17

 

 

OFF TIMER

P.17

 

 

CHILD LOCK

P.17

 

 

COMPRESS (16:9)

P.11

 

 

AI ECO SENSOR/

P.11

 

 

ECO MODE

 

 

 

 

INSTALL

AUTO PROGRAM

P.19

 

 

EDIT/MANUAL

P.19

DELETE, MOVE,

P.19-

 

 

 

 

MANUAL, INSERT

P.20

 

 

COLOUR SYSTEM

P.9

 

 

LANGUAGE

P.17

LANGUAGE

P.17

 

 

TEXT LANGUAGE

P.13

TEXT LANGUAGE

P.13

 

 

VIDEO-2 SETTING

P.18

 

 

BLUE BACK

P.11

 

 

PICTURE TILT

P.11

 

 

BEEP

P.18

5

TV buttons and functions

The illustrations shown below is for AV-21BS26 and AV-29SS26 only, which are used for explanation purpose. Your TV may not look exactly the same as illustrated.

Front of the TV

AV-29SS26

 

 

POWER

 

 

TV/VIDEO

 

 

 

 

 

 

 

R

 

MENU/OK

 

 

L/MONO

3)-IN(VIDEO

CHANNEL

 

 

 

 

 

V

 

VOLUME

 

 

 

 

AV-21BS26

 

 

 

 

 

 

 

 

POWER

V L / MONO

R

CHANNEL

VOLUME

 

IN (VIDEO-3)

MENU

 

 

OK

 

 

 

Rear of the TV

AV-29SS26

6)$%/

#/-0/.%.4

 

).054

6)$%/

/54054

).054

 

3

 

 

/6%2

 

 

6

9 6

6

, -/./ #" , -/./ ,

2 #2 2 2

No. Button/terminal

Description

Page

1

L (main power)

Press to turn on or turn off the TV’s main power.

2

POWER lamp

Indicate the TV’s status.

 

 

 

No colour

: TV’s main power is being turned off.

 

 

 

 

Red

: TV’s main power is being turned on.

 

 

 

 

Blink

: While the TV is in standby mode, ON TIMER funciton is in used.

 

 

 

 

While the TV is in turn on mode , OFF TIMER function is in used.

 

 

 

Note: When you turn off the power switch while TV is in standby mode,

 

 

 

the power lamp will go off in 10 -15 seconds.

 

 

 

 

When you operate the TV, POWER Lamp will be blink.

 

3

ECO sensor

 

 

 

4

Remote control sensor

 

5

TV/VIDEO

 

Press to select TV or Video terminal input or exit from menu.

6

VOLUME -/+

Press to adjust the volume level.

7

CHANNEL -/+

Press to select the desired channel (Both of RF and Video input.)

8

MENU/OK

 

Press to display the menu.

9

IN (VIDEO-3)

Video and audio input jacks for VIDEO-3 mode.

22

!

 

 

Headphone jack.

22

 

 

 

 

 

"

 

 

Aerial socket.

7

 

 

 

 

# OUTPUT

 

Video and audio output jacks. (The component video

22

 

 

 

signal cannot be output.)

 

$ COMPONENT

Video or component video, and audio input jacks for VIDEO-2

22

 

(VIDEO-2) INPUT

mode. You can select the input signal by setting the “VIDEO-2

 

 

 

 

SETTING” function (see page 18).

 

% VIDEO-1 INPUT

Video or S-VIDEO, and audio input jacks for VIDEO-1 mode.

7

 

 

How to operate the menus with the TV button

 

 

 

 

TV button

Work as same as the button on Note

 

 

 

the remote control unit

 

MENU

MENU/OK button

To display main menu and exit menu after

 

 

 

 

finish setting.

 

CHANNEL -/+

∞/5 button

To select menu function.

 

VOLUME -/+

2/3 button

To choose a Top menu and adjust the

 

 

 

 

desired menu function.

 

6

JVC AV-21MX76, AV-25MX76, AV-25MX16, AV-25MX56, AV-25MS26 User Manual

Setting up your TV

CAUTION

• Turn off the equipment including the TV before connecting.

1 Connecting the aerial cable.

VHF/UHF outdoor aerial

75-ohm coaxial cable (not supplied)

If you connect a VCR, connect the aerial output jack of your VCR and the aerial jack on the TV with aerial cable. Then connect the output jacks of your VCR and the VIDEO-1 input jacks of the TV with the video cable (or S-VIDEO cable if available) and audio cables. For details, see the manual of your VCR.

Rear of TV

 

VHF/UHF outdoor aerial

AV-21BS26

 

VIDEO-1

COMPONENT

 

 

(VIDEO-2)

OUTPUT

INPUT

 

 

INPUT

 

S

 

 

 

OVER

 

 

 

V

Y/V

 

V

L/MONO CB

L/MONO

L

R

CR

R

R

VCR

The illustration shown is just a sample. It may not be same as your TV.

2 Connecting the main plug to the AC outlet.

3Inserting batteries into the remote control.

Insert two batteries by following the + and - polarities and inserting the - end first.

CAUTION:

Follow the cautions printed on the batteries. Notes:

• Use AA/R6/UM-3 dry cell batteries.

• If the remote control does not work properly, fit new batteries. The supplied batteries are for testing,

not regular use.

4Turn on the TV by pressing the main power button.

JVC logo appears on the screen.

JVC logo will appear on the screen again at the phase of “SETUP TOUR RESTART?” function. Then the initial setting can be performed according to page 8.

Note:

While in the INSTALL menu with the cursor pointing at INSTALL, pressing the blue button will also display the JVC logo.

7

Setting up your TV (continued)

5Making the initial settings

Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then operate the TV by following the steps below:

LANGUAGE

 

TEXT LANGUAGE

 

AUTO PROGRAM

 

EDIT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PR

 

CH/CC

 

GROUP–1

 

 

 

 

 

 

 

 

 

 

ENGLISH

 

 

 

 

 

 

 

 

 

 

 

 

кмллдав

 

 

 

GROUP–2

 

 

 

 

 

 

 

 

AV

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

CH 04

 

 

 

 

 

GROUP–3

 

 

22%

 

 

 

 

 

2

CH 76

 

FRANÇAIS

 

 

GROUP–4

 

 

 

 

 

 

 

 

3

CH 78

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

CH 05

 

MENU : OK

 

 

MENU : OK

 

 

MENU : OK

 

 

5

 

CH 28

3

 

 

 

 

 

 

6

 

CH 10

 

DISPLAY : BACK

 

 

DISPLAY : BACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV/VIDEO : EXIT

 

 

TV/VIDEO : EXIT

 

 

 

 

 

 

 

 

 

 

MENU : OK

INSERT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MOVE

 

DELETE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MANUAL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

When turn on the TV at the next time

AUTO PROGRAM

SETUP TOUR RESTART?

: YES

MENU : NO

• Press 5/∞ button to

• Press 5/∞ button to

• TV will start searching

• To complete the initial

select your desired

select your desired

for the channels.

setting, press the

language*.

Teletext language

 

MENU/OK button. To

 

group*. For details,

To stop AUTO

edit the channel list,

 

see page 13.

PROGRAM, press

see page 19.

 

(For BS26/MS26/

MENU/OK button.

 

 

SS26/MX76/SX76

 

 

 

series only)

 

 

“SETUP TOUR RESTART?” will be displayed.

Press the MENU/OK button to cancel

the SETUP TOUR RESTART function.

If you want to make initial settings again when the next time you turn on the TV, press the Red button to activate the SETUP TOUR RESTART function.

*If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/кмллдав/ / /FRANÇAIS, you

can select the TEXT LANGUAGE group from GROUP-1 to GROUP-4.

If the TEXT function is available for your TV and the LANGUAGE shown follow as ENGLISH/кмллдав/ /MELAYU/INDONESIA, you can select the TEXT LANGUAGE group from GROUP-1 to GROUP-3.

8

Basic setting for picture

COLOUR SYSTEM

You can select the appropriate colour system when the picture is not clear or no colour appears.

Press the COLOUR SYSTEM button to select a setting.

AUTO PAL SECAM NTSC3.58

NTSC4.43

To operate this function with a menu:

MENU INSTALL menu COLOUR SYSTEM

For the colour system in each country or region, see the table below:

Area

Country or Region

System

 

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,

 

 

Yemen, etc.

PAL

 

Indonesia, Malaysia, Singapore, Thailand, India, etc.

 

Asia, Middle

China, Vietnam, etc.

PAL

East

 

 

Hong Kong, etc.

PAL

 

 

 

 

 

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.

SECAM

 

Philippines, Taiwan, Myanmar, etc.

NTSC

 

Russia, etc.

SECAM

Europe

Czech Republic, Poland, etc.

PAL

 

 

Germany, Holland, Belgium, etc.

PAL

 

 

UK, etc.

PAL

Oceania

Australia, New Zealand, etc.

PAL

 

Republic of South Africa, etc.

PAL

 

 

 

Africa

Nigeria, etc.

PAL

 

Egypt, Morocco, etc.

SECAM

PICTURE MODE

You can choose the desired picture setting with one-touch. Press the PICTURE MODE button to select a setting.

SOFT

Softens contrast and sharpness.

BRIGHT

Heightens contrast and sharpness.

STANDARD

Standard picture setting.

USER

You can change this picture setting as you like.

 

Select USER and adjust following items in the

 

PICTURE SETTING menu. (CONTRAST, BRIGHT,

 

SHARP, COLOUR, TINT)

When you select VIDEO-2 Mode, you cannot adjust SHARP. When you set DVD THEATER STATUS in DVD MENU to ON, you cannot adjust PICTURE MODE.

To operate this function with a menu:

MENU

PICTURE menu

PICTURE MODE

To return the USER setting to default, press the blue button when the PICTURE SETTING menu is displayed.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

9

Basic setting for picture (continued)

PICTURE SETTING

You can adjust the desired picture setting when selecting USER in PICTURE MODE.

1 Select USER in PICTURE MODE under PICTURE menu.

MENU

PICTURE menu

PICTURE MODE

WHITE BALANCE

You can change the white balance of the picture to better match the type of video being viewed.

Select WHITE BALANCE in the PICTURE menu, then choose the desired setting.

USER

2Select PICTURE SETTING in PICTURE menu, then adjust the setting.

MENU

PICTURE menu

PICTURE SETTING

 

 

 

 

 

CONTRAST

2

: Lower contrast

3

: Higher contrast

BRIGHT

2

: Darker

3

: Brighter

SHARP

2

: Softer

3

: Higher

COLOUR

2

: Lighter

3

: Deeper

TINT

2

: Reddish

3

: Greenish

When you select VIDEO-2 Mode, you cannot adjust SHARP.

MENU

PICTURE menu

WHITE BALANCE

 

 

NORMAL

Normal white balance.

COOL

Bluish white.

 

WARM

Reddish white.

 

When you set DVD THEATER STATUS in DVD MENU to ON, you cannot adjust WHITE BALANCE.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

10

Advanced setting for picture

AI ECO SENSOR (ECO)/ECO MODE

You can adjust TV screen contrast according to the brightness of your room.

Press the ECO button to select the desired mode.

OFF

Cancel the function.

MODE-1/ECO-1

Mild contrast (recommended.)

MODE-2/ECO-2

Even contrast.

DISPLAY (for AI ECO SENSOR only)

Display the graphic of the function.

To operate this function with a menu:

MENU FEATURES menu

AI ECO SENSOR / ECO MODE

When you set DVD THEATER STATUS in DVD MENU to ON, you cannot adjust AI ECO SENSOR / ECO MODE.

Note : AI ECO SENSOR for M and S series. ECO MODE for B series.

Correcting the Slanting Picture (PICTURE TILT)

You can correct the picture tilt caused by the earth’s magnetic force.

1Select PICTURE TILT in the INSTALL menu, then press MENU/ OK button.

MENU

INSTALL menu

PICTURE TILT

The following display appears.

PICTURE TILT

MENU : OK

DISPLAY : BACK

TV/VIDEO : EXIT

2Press the 5/∞ buttons until the picture becomes level. Then press the MENU/OK button.

COMPRESS (16:9)

You can convert a normal picture (4:3 aspect ratio) into a wide picture (16:9 aspect ratio).

Select COMPRESS (16:9) in the FEATURES menu, then choose ON or OFF.

MENU

FEATURES menu

COMPRESS (16:9)

BLUE BACK

You can set the TV to automatically change to a blue screen and mute the sound if the signal is weak or absent, or when there is no input from an antenna.

Select BLUE BACK in the INSTALL menu, then choose ON or OFF.

MENU

INSTALL menu

BLUE BACK

If you wish to continue viewing the poor picture, off the BLUE BACK function.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

11

Original features for picture

PIP

You can display a sub picture within the main picture on the screen. Press the PIP operation buttons to display and change the sub picture setting.

PIP Display the sub picture.

To cancel, press the PIP button again.

Notes:

You can hear the sound from the main picture only.

When main picture and sub picture are the same TV channel.

Press SUB-P -/+

Main picture will be changed TV channel

follow as sub picture.

 

 

Press

( Input )

To change sub picture to video mode.

 

 

 

 

Press CHANNEL -/+

Sub picture will be changed TV channel follow

 

as Main picture.

 

Press CHANNEL -/+

Until main picture change to video mode.

 

 

 

 

SUB-P -/+

Select the desired TV channel for sub picture.

(Input)

Select the input source for the sub picture.

(Swap) Swap between the main picture and sub picture.

(Position) Change the sub picture position.

Each time you press the (Position) button, the sub picture position will change as follows:

lower right lower left upper left upper right

(Freeze) Freeze the sub picture.

When VIDEO-2 is set to component, you cannot select VIDEO-2 for sub picture. If the main picture input source is VIDEO-2 with component, the PIP function is disabled.

TELETEXT

You can watch the Teletext broadcast channel with TEXT function. 1 Press the TEXT button to select the desired mode as follows:

TV mode TEXT twin mode TEXT mode

2Press the CHANNEL -/+ buttons, number buttons or colour buttons to select other Teletext pages.

3Press TEXT or TV/VIDEO button to return to TV mode.

You can also operate the teletext using the following buttons:

(Hold)

Hold a teletext page.

 

 

The

(Hold) icon is displayed at the top left of the screen.

 

To cancel, press

(Hold) button again.

(Reveal)

Display the hidden text (e.g. answers to a quiz).

 

To cancel, press

(Reveal) button again.

(Size)

Enlarge the teletext display.

 

 

 

 

(Index)

Return to the index page instantly.

 

 

 

(Cancel)

Watch TV programme while waiting for a teletext page.

 

When the teletext page is found, a page number appears

 

at the upper left of the screen.

 

 

Press

(Cancel) button to view the teletext page.

(Sub-page)

Operate the

(Sub-page) function.

 

 

Sub-page numbers are displayed at the left of the screen.

 

To cancel sub-page function, press

(Sub-page) button

 

again.

 

 

 

 

 

 

 

 

 

 

12

Original features for picture (continued)

TEXT LANGUAGE

You can set the Teletext language group that corresponds to the programmes.

Select TEXT LANGUAGE in the INSTALL menu, then choose the desired language group.

MENU

INSTALL menu

TEXT LANGUAGE

GROUP-1 English, German, Swedish, Finnish, Danish, Hungarian,

Italian, French, Spanish, Portuguese, Turkish

GROUP-2 Polish, German, Estonian, Slovenian, Czech, Slovakian,

Rumanian

GROUP-3 Polish, German, Estonian, Lettish, Russian, Ukrainian

GROUP-4 English, Polish, French, Turkish, Arabic, Farsi

Depending on the broadcast, the language set may not display properly. For details, refer to page 8.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

13

Basic setting for sound

SOUND SYSTEM

You can select an appropriate sound system when abnormal sound occurs even when the picture appears normally.

Press the SOUND SYSTEM button to select a setting.

B/G I D/K M

This function is not available in video mode.

For the sound system in each country or region, see the table below:

Area

Country or Region

System

 

 

 

 

Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,

 

 

Yemen, etc.

B/G

 

Indonesia, Malaysia, Singapore, Thailand, India, etc.

 

Asia, Middle

China, Vietnam, etc.

D/K

East

Hong Kong, etc.

I

 

 

 

 

 

Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.

B/G

 

Philippines, Taiwan, Myanmar, etc.

M

 

Russia, etc.

D/K

 

 

 

Europe

Czech Republic, Poland, etc.

D/K

 

 

Germany, Holland, Belgium, etc.

B/G

 

 

UK, etc.

I

Oceania

Australia, New Zealand, etc.

B/G

 

 

 

 

Republic of South Africa, etc.

I

 

 

 

Africa

Nigeria, etc.

B/G

 

Egypt, Morocco, etc.

B/G

SOUND MODE

You can choose the desired sound setting.

Select the SOUND MODE in SOUND menu, then choose the setting.

MENU SOUND menu SOUND MODE

USER

You can change this sound setting as you like.

 

Select USER and adjust the frequencies in EQUALIZER

 

(100, 300, 1K, 3K, 8K Hz).

 

For details, see “EQUALIZER” on page 15.

SOUND TURBO

Emphasize on low and high frequency levels.

THEATER

Emphasize on movie sound.

MUSIC

Emphasize on music effect.

NEWS

Emphasize on vocal sound.

When you select VIDEO-2, you cannot adjust SOUND MODE function. You can adjust it in DVD Menu.

When SOUND MODE is set to SOUND TURBO, EQUALIZER, CINEMA SURROUND and MaxxBass functions are not available.

BALANCE

You can adjust the volume balance between the left and right speakers.

Select BALANCE in SOUND menu, then adjust the setting.

MENU

SOUND menu

BALANCE

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

14

AI VOLUME
You can adjust the volume of all the channels and video inputs to the same level automatically depends on the strength of signal of the sources.
Select AI VOLUME in SOUND menu, then choose ON or OFF.
MENU : OK DISPLAY : BACK TV/VIDEO : EXIT

Advanced setting for sound

CINEMA SURROUND

You can enjoy an enhanced sound for wider audience. Press the CINEMA SURROUND button to select a setting.

OFF

Cancel the function.

ON

Listen to sound with wider audience effect.

This function is not available when SOUND MODE is set to SOUND TURBO.

To operate this function with a menu:

MENU

SOUND menu

CINEMA SURROUND

STEREO / III ( )

You can enjoy the stereo and bilingual broadcasted programmes. Press the button to select the desired mode.

Select stereo sound.

 

Select monaural sound.

I

Select bilingual I (sub I).

II

Select bilingual II (sub II).

This function is not available in video mode.

To operate this function with a menu:

MENU

SOUND menu

STEREO / III

MaxxBass

You can enjoy an enhanced bass sound which cannot be reproduced by normal speakers.

Select MaxxBass in SOUND menu, then choose the desired setting.

MENU SOUND menu MaxxBass

OFF

MaxxBass is turned off.

HIGH

MaxxBass effect is high.

LOW

MaxxBass effect is low.

This function is not available when SOUND MODE is set to SOUND TURBO.

“MaxxBass” is a registered trademark of Waves Audio Ltd. in the USA, Japan and other countries.

EQUALIZER

You can adjust the sound level of each frequencies when selecting USER mode in SOUND MODE.

1 Select USER in SOUND MODE under SOUND menu.

MENU

SOUND menu

SOUND MODE

USER

2 Select EQUALIZER in SOUND menu.

MENU SOUND menu EQUALIZER

The following display appears.

EQUALIZER

 

 

 

IIIIIIIIIIIIIIII

IIIIIII

IIIIIIIIIIIIIIII

IIIIIIII

 

100

300

1K

3K

8K Hz

3 Select and adjust the desired frequencies.

4 Press the MENU/OK button to exit the menu.

Adjust high frequency will affect higher pitch sound and vice versa. When you select VIDEO-2, you cannot adjust EQUALIZER.

MENU SOUND menu AI VOLUME

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

15

DVD Menu

AUTO SIGNAL DETECT

When the DVD input signal is detected, the input mode will be changed to VIDEO-2 automatically. And when the DVD input signal is not detected, the input mode will be changed to RF previous input mode.

Select AUTO SIGNAL DETECT in DVD MENU under FEATURES menu then choose ON or OFF (Factory setting is ON).

MENU

FEATURES menu

DVD MENU

AUTO SIGNAL DETECT

 

Press the “POWER ON” button on the DVD players or VCRs (follow by the “PLAY” button for VCRs) so that the signal can be detected.

DVD PICTURE MODE

You can enhance the picture quality of the DVD or VIDEO-2. Select DVD PICTURE MODE in DVD MENU under FEATURES menu, then choose the desired setting.

MENU

FEATURES menu

DVD MENU

DVD PICTURE MODE

 

 

 

 

OFF

Cancel the function.

 

CLEAR-1

Select when the disc is with lots of noise (To soften the picture).

CLEAR-2

Select when the disc is with less noise (To sharpen the picture).

ON

Enjoy movie playback with suitable colour temperature, sharp

 

subtitles and improved gradation for black, like in a theater.

OFF

Cancel the function.

When you set DVD THEATER STATUS to ON, PICTURE MODE, WHITE BALANCE and AI ECO SENSOR / ECO MODE functions are not available.

DVD SOUND MODE

You can choose different sound setting for viewing different types of DVD content.

Select DVD SOUND MODE in DVD MENU under FEATURES menu, then choose the desired setting.

MENU FEATURES menu DVD MENU

DVD SOUND MODE

MUSIC

Select when watching a music concert.

USER

Select if you want to adjust the sound setting to your preference.

THEATER

Select when watching an action movie.

DRAMA

Select when watching a drama movie.

DVD THEATER STATUS

You can enjoy an enhanced picture quality for movie playback in a dark room, like watching a movie in the theater.

Select DVD THEATER STATUS in DVD MENU under FEATURES menu, then choose ON or OFF.

MENU

FEATURES menu

DVD MENU

DVD THEATER STATUS

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

16

Customized setting

VNR

You can reduce the picture noise.

Select VNR in PICTURE menu, then choose a setting of VNR function.

MENU

PICTURE menu

VNR

 

 

 

OFF

VNR is turned off.

 

AUTO

Effect of VNR is automatically controlled.

MIN

Effect of VNR becomes minimum level.

MAX

Effect of VNR becomes maximum level.

If you select MAX, the picture becomes softer even if the original picture is sharp.

When you select VIDEO-2, you cannot adjust VNR function.

LANGUAGE

You can choose your desired on screen display language.

Select LANGUAGE in the INSTALL menu, then choose a language.

MENU

INSTALL menu

LANGUAGE

CHILD LOCK

You can disable the front control buttons of the TV.

Select CHILD LOCK in the FEATURES menu, then choose ON or OFF.

MENU

FEATURES menu

CHILD LOCK

ON TIMER

You can set the TV to turn on automatically from standby mode at a set channel and time.

1 Select ON TIMER in the FEATURE menu.

MENU

FEATURES menu

ON TIMER

The following display appears.

ON TIMER

PR

01

ON TIMER

00:15

MENU : OK

DISPLAY : BACK

TV/VIDEO : EXIT

2 Choose the PR (channel) by pressing the 2/3 button.

External input, AV position and any un-preset channel cannot be chosen for PR.

3 Set the ON TIMER to your desired period of time by pressing the 2/3 button. ON TIMER starts. You can set the period of time to a maximum of 12 hours in 15-minute intervals.

To off the ON TIMER, set the ON TIMER to OFF.

Note : If TV is not in standby mode when ON TIMER is reach the setting time, this case is not available.

OFF TIMER

You can set the TV to turn off automatically to standby mode after a set time.

Press the OFF TIMER button to select a desired period of time.

You can set the period of time to a maximum of 120 minutes in 10 minute intervals.

To operate this function with a menu:

MENU

FEATURES menu

OFF TIMER

When the remaining elapse time is one minute, “GOOD NIGHT!” appears on the screen.

You can display the OFF TIMER menu again to confirm or change the remaining time.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

17

Customized setting (continued)

VIDEO-2 SETTING

You can set the VIDEO-2 SETTING according to the video signal output from external devices connected to the VIDEO-2 terminal. Select VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT).

MENU

INSTALL menu

VIDEO-2 SETTING

 

 

VIDEO

If a normal video signal (composite video signal) is input.

COMPONENT

If a component video signal (Y/CB/CR) is input.

You must choose a setting according to the signal that you input to VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must set VIDEO-2 SETTING to VIDEO.)

For connecting methods, see “Additional Preparation” on page 22.

BEEP

You can use the BEEP function to alert you during DVD AUTO SIGNAL DETECT, AI ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF TIMER operations and when some buttons on the remote control are pressed.

Select BEEP in the INSTALL menu, then choose ON or OFF.

DISPLAY

You can display the programme number, video terminal number and PR list on the screen.

Press the DISPLAY button to select the desired mode:

ON OFF PR LIST

Choose a TV channel or a VIDEO terminal.

1Press the DISPLAY button to display the PR LIST.

2Select a programme number or video terminal by pressing the 5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button.

PR LIST

PR

 

CH/CC

 

V1

 

 

 

V2

 

 

 

V3

 

 

 

AV

 

 

 

 

 

 

 

 

1

CH 09

 

2

CC 76

 

3

CC 78

 

 

 

 

MENU : OK

 

-7

 

 

+7

 

 

 

 

 

 

MENU

INSTALL menu

BEEP

When the volume is level 0, then BEEP function is not available.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

18

TV channel presetting

To register the TV channels automatically (AUTO PROGRAM)

You can register the TV channels into the TV’s channel list automatically.

1 Display the INSTALL menu.

MENU INSTALL menu

2Choose AUTO PROGRAM, then press the MENU/OK button. AUTO PROGRAM function starts, and the channels received are registered in the channel list (PR LIST) automatically.

3The EDIT menu appears.

To edit the channel list

Proceed to Step 3 of “To edit the channel list

 

(PR LIST)” on page 20.

If a channel is not

Proceed to Step 3 of “To register the TV

registered

channels manually” on this page.

To exit the menu

Press the MENU/OK button.

To register the TV channels manually (MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.

1 Display the INSTALL menu.

MENU

INSTALL menu

2 Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears.

EDIT

PR

 

CH/CC

AV

 

 

1

CH 04

2

CH 76

3

CH 78

4

CH 05

5CH 28 3

6CH 10

MENU : OK INSERT MOVEDELETE MANUAL

3Choose the channel which you want to register.

4Press the blue button to activate the MANUAL function.

The sound system of the channel appears at the right of the CH/CC number.

5Press the 3 button to choose an appropriate sound system. For details, see “SOUND SYSTEM” on page 14.

6Press the green or red button to search for the TV channel. Searching stops when a channel is found and displayed.

7Repeat step 5 until your desired TV channel appears.

If the reception is poor

Press the blue or yellow button to fine tune

 

the TV channel.

 

 

If noisy sound is heard

Press the 3 button to choose an appropriate

 

sound system.

 

 

8Press the MENU/OK button to exit the menu.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

19

TV channel presetting (continued)

To edit the channel list (PR LIST) (MOVE and DELETE in the EDIT menu)

You can edit the TV channel list as you like.

Note: After this operation, other channel’s PR numbers will be changed.

1 Display the INSTALL menu.

To add in the new channel (INSERT in the EDIT menu)

You can add in new channels in the TV channel list as you like. You need to find the “CH/CC” number for the TV channel. Find the “CH/CC” number corresponding to the channel number of the TV channel from “CH/CC number list” on page 21.

MENU INSTALL menu

2Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears.

EDIT

PR

 

CH/CC

AV

 

 

1

CH 04

2

CH 76

3

CH 78

4

CH 05

5CH 28 3

6CH 10

MENU : OK INSERT MOVEDELETE MANUAL

3Choose the channel which you want to change its PR number, or delete.

4Do the following action:

To change the PR number

Press the 3 button. Then move it to the new

(MOVE)

PR number you want to use for the channel

 

by pressing the 5/∞ button. Finally press

 

the 2 button.

To delete the channel

Press the yellow button.

(DELETE)

 

5 Press the MENU/OK button to exit the menu.

1 Display the INSTALL menu.

MENU

INSTALL menu

2Choose EDIT/MANUAL, then press the MENU/OK button. EDIT menu appears.

3Choose the PR number for which you will register a new TV channel. When you add a new TV channel of NTSC-M system, press the SOUND SYSTEM button to change the sound system to M. Then proceed to the next step.

4Press the green button, then press 3 button to choose “CC” or “CH”.

5Press the number button to enter the CH/CC number for the TV channel you wish to add.

The TV starts to search the TV channel, and the picture of the TV channel appears. If the TV finds no TV channel, a noisy picture appears.

When a TV channel has already been registered in PR99, using the INSERT function deletes that TV channel.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

20

TV channel presetting (continued)

CH/CC number

When you want to use the INSERT function on page 20, find the CH/CC number corresponding to the channel number of the TV channel from this table.

Channel No. Country

US

United States, Philippines, etc..

CCIR

Middle East, Southeast Asia, etc..

OIRT

Eastern Europe, Russia, Vietnam,

 

etc..

 

 

 

 

AUSTRALIA Australia, etc..

 

 

Channel

 

 

 

 

 

 

 

 

 

 

 

CH

US

CCIR

 

OIRT

AUSTRALIA

CH 02

US-2

E2

 

R1

AU-0

CH 03

US-3

E3

 

 

AU-1

CH 04

US-4

E4

 

R2

AU-2

CH 05

US-5

E5

 

R6

AU-6

CH 06

US-6

E6

 

R7

AU-7

CH 07

US-7

E7

 

R8

AU-8

CH 08

US-8

E8

 

R9

AU-9

CH 09

US-9

E9

 

 

 

CH 10

US-10

E10

 

R10

AU-10

CH 11

US-11

E11

 

R11

AU-11

CH 12

US-12

E12

 

R12

 

CH 13

US-13

 

 

 

 

CH 14

US-14, W+29

 

 

 

 

CH 15

US-15, W+30

 

 

 

 

CH 16

US-16, W+31

 

 

 

 

CH 17

US-17, W+32

 

 

 

 

CH 18

US-18, W+33

 

 

 

 

CH 19

US-19, W+34

 

 

 

 

CH 20

US-20, W+35

 

 

 

 

CH 21

US-21, W+36

E21

 

 

 

CH 22

US-22, W+37

E22

 

 

 

CH 23

US-23, W+38

E23

 

 

 

CH 24

US-24, W+39

E24

 

 

 

CH 25

US-25, W+40

E25

 

 

 

CH 26

US-26, W+41

E26

 

 

 

CH 27

US-27, W+42

E27

 

 

 

CH 28

US-28, W+43

E28

 

 

AU-28

CH 29

US-29, W+44

E29

 

 

AU-29

CH 30

US-30, W+45

E30

 

 

AU-30

CH 31

US-31, W+46

E31

 

 

AU-31/AU-32

CH 32

US-32, W+47

E32

 

 

AU-33

CH

US

CCIR

OIRT

AUSTRALIA

CH 33

US-33, W+48

E33

 

AU-34

CH 34

US-34, W+49

E34

 

AU-35

CH 35

US-35, W+50

E35

 

AU-36

CH 36

US-36, W+51

E36

 

AU-37

CH 37

US-37, W+52

E37

 

AU-38

CH 38

US-38, W+53

E38

 

AU-39/AU-40

CH 39

US-39, W+54

E39

 

AU-41

CH 40

US-40, W+55

E40

 

AU-42

CH 41

US-41, W+56

E41

 

AU-43

CH 42

US-42, W+57

E42

 

AU-44

CH 43

US-43, W+58

E43

 

AU-45

CH 44

US-44, W+59

E44

 

AU-46

CH 45

US-45, W+60

E45

 

AU-47/AU-48

CH 46

US-46, W+61

E46

 

AU-49

CH 47

US-47, W+62

E47

 

AU-50

CH 48

US-48, W+63

E48

 

AU-51

CH 49

US-49, W+64

E49

 

AU-52

CH 50

US-50, W+65

E50

 

AU-53

CH 51

US-51, W+66

E51

 

AU-54

CH 52

US-52, W+67

E52

 

AU-55/AU-56

CH 53

US-53, W+68

E53

 

AU-57

CH 54

US-54, W+69

E54

 

AU-58

CH 55

US-55, W+70

E55

 

AU-59

CH 56

US-56, W+71

E56

 

AU-60

CH 57

US-57, W+72

E57

 

AU-61

CH 58

US-58, W+73

E58

 

AU-62

CH 59

US-59, W+74

E59

 

AU-63/AU-64

CH 60

US-60, W+75

E60

 

AU-65

CH 61

US-61, W+76

E61

 

AU-66

CH 62

US-62, W+77

E62

 

AU-67

CH 63

US-63, W+78

E63

 

AU-68

CH 64

US-64, W+79

E64

 

AU-69

CH 65

US-65, W+80

E65

 

 

CH 66

US-66, W+81

E66

 

 

CH 67

US-67, W+82

E67

 

 

CH 68

US-68, W+83

E68

 

 

CH 69

US-69, W+84

E69

 

 

CC

US

CCIR

OIRT

AUSTRALIA

CC 01

 

S-1

 

AU-5

CC 02

 

S-2

 

 

CC 03

 

S-3

 

 

CC 04

 

S-4

 

 

CC 05

 

S-5

 

 

CC 06

 

S-6

 

AU-5A

CC 07

 

S-7

 

 

CC 08

 

S-8

 

 

CC 09

 

S-9

 

 

CC 10

 

S-10

 

 

CC 11

 

S-11

 

 

CC 12

 

S-12

 

 

CC 13

 

S-13

 

 

CC 14

A

S-14

 

 

CC 15

B

S-15

 

 

CC 16

C

S-16

 

 

CC 17

D

S-17

 

 

CC

US

CCIR

OIRT

AUSTRALIA

CC 18

E

S-18

 

 

CC 19

F

S-19

 

 

CC 20

G

S-20

 

 

CC 21

H

S-21

 

 

CC 22

I

S-22

 

 

CC 23

J

S-23

 

 

CC 24

K

S-24

 

 

CC 25

L

S-25

 

 

CC 26

M

S-26

 

 

CC 27

N

S-27

 

 

CC 28

O

S-28

 

 

CC 29

P

S-29

 

 

CC 30

Q

S-30

 

 

CC 31

R

S-31

 

 

CC 32

S

S-32

 

 

CC 33

T

S-33

 

 

CC 34

U

S-34

 

 

CC 35

V

S-35

 

 

CC 36

W

S-36

 

 

CC 37

W+1

S-37

 

 

CC 38

W+2

S-38

 

 

CC 39

W+3

S-39

 

 

CC 40

W+4

S-40

 

 

CC 41

W+5

S-41

 

 

CC 42

W+6

 

 

 

CC 43

W+7

 

 

 

CC 44

W+8

 

 

 

CC 45

W+9

 

 

 

CC 46

W+10

 

 

 

CC 47

W+11

 

 

 

CC 48

W+12

 

 

 

CC 49

W+13

 

 

 

CC 50

W+14

 

 

 

CC 51

W+15

 

 

 

CC 52

W+16

 

 

 

CC 53

W+17

 

 

 

CC 54

W+18

 

 

 

CC 55

W+19

 

 

 

CC 56

W+20

 

 

 

CC 57

W+21

 

 

 

CC 58

W+22

 

 

 

CC 59

W+23

 

 

 

CC 60

W+24

 

 

 

CC 61

W+25

 

 

 

CC 62

W+26

 

 

 

CC 63

W+27

 

 

 

CC 64

W+28

 

 

 

CC 75

 

X

 

 

CC 76

 

Y

R3

 

CC 77

 

Z

R4

AU-3

CC 78

 

Z+1

R5

 

CC 79

 

Z+2

 

AU-4

CC 95

A-5

 

 

 

CC 96

A-4

 

 

 

CC 97

A-3

 

 

 

CC 98

A-2

 

 

 

CC 99

A-1

 

 

 

21

Loading...
+ 49 hidden pages