COLOUR TELEVISION
INSTRUCTIONS
Thank you for buying this JVC colour television.
To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.
AV-14F116
AV-21B116
AV-21C116
AV-21D116
AV-21V116
Contents |
|
Safety precautions |
2 |
Preparation |
3 |
1 Confirm which remote control you have ...... |
3 |
2 Inserting the batteries ................................... |
3 |
3 Connecting the aerial and external devices ... |
4 |
4 Connecting the power cord ........................ |
6 |
5 SETUP TOUR .............................................. |
6 |
Basic operation |
7 |
Remote control buttons and functions |
8 |
PICTURE MODE button ................................. |
8 |
COLOUR SYSTEM button ............................. |
8 |
SOUND SYSTEM button ............................... |
8 |
I/II button ........................................................ |
8 |
DISPLAY button ............................................. |
9 |
RETURN + button .......................................... |
9 |
CHANNEL SCAN button ................................ |
9 |
MUTING button ............................................. |
9 |
OFF TIMER button ......................................... |
9 |
Using the TV’s menus |
10 |
Basic operation ............................................ |
10 |
ON TIMER ..................................................... |
11 |
INPUT ........................................................... |
11 |
VNR ............................................................... |
12 |
AUTO SHUTOFF .......................................... |
12 |
CHILD LOCK ................................................. |
12 |
BLUE BACK .................................................. |
12 |
SETUP TOUR ............................................... |
13 |
LANGUAGE .................................................. |
13 |
AUTO CH PRESET ....................................... |
13 |
MANUAL CH PRESET .................................. |
14 |
SKIP .............................................................. |
15 |
Picture Adjustments .................................... |
15 |
Using the buttons on the TV |
16 |
Troubleshooting |
18 |
Specifications |
19 |
GGT0111-001A-H |
© 2006 Victor Company of Japan, Limited |
0306-NIC-JMT |
Safety precautions
WARNING
• To prevent fire or shock hazard, do not expose the TV to rain or moisture.
CAUTION
•Operate only from the power source indicated on the rear of the TV.
•Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord.
•Never block or cover the cabinet openings for ventilation. Never install the TV where good ventilation is unattainable. When installing
this TV, leave spaces for ventilation around the TV more than the minimum distances shown in the diagram.
•Do not allow objects or liquid into the cabinet openings.
•In the event of a fault, unplug the TV and call a service technician. Do not attempt to repair it by yourself or remove the rear cover.
•The surface of the TV screen is easily damaged. Be very careful with it when handling the TV. Should the TV screen become soiled, wipe it with a soft dry cloth. Never rub it forcefully. Never use any cleaner or detergent on it.
•This TV can be turned on/ off power by connecting/ disconnecting the AC Plug into AC outlet. While this TV is being installed, enough space should be reserved for connecting/ disconnecting the AC Plug into AC outlet by hand.
2
Preparation
1 Confirm which remote control you have
RM-C1121
2 Inserting the batteries
Correctly insert two batteries, observing the , and . polarities and inserting the . end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work properly, fit new batteries.
The supplied batteries are for testing, not regular use.
3
Preparation
3Connecting the aerial and external devices
•For further details, refer to the manuals provided with the devices you are connecting.
•Connecting cables are not supplied.
•The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording).
■ Connecting the aerial and VCR
Connecting the aerial |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
! |
|
|
|
|
|
|
|
|
* AV-14F116 only. |
• Illustration of AV-14F116 |
|
|
|
|
|
|
Connecting the aerial and VCR
VHF/UHF outdoor aerial
2
VIDEO AUDIO
IN
OUT
|
|
|
3 |
|
To RF |
To video |
To audio |
|
output |
output |
output |
1 |
To aerial input |
VCR |
|
• Illustration of AV-14F116.
4
Preparation
■ Connecting other external devices
VIDEO AUDIO
IN
OUT
To audio |
To video |
output |
output |
VCR (for playing)
VCR (for recording)
To audio |
To video |
input |
input |
• Illustration of AV-14F116.
Camcorder |
or |
TV game |
To video |
To audio |
output |
output |
VIDEO IN AUDIO
MENU CHANNEL
• Illustration of AV-14F116.
Headphones
•Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off.
5
Preparation
4 Connecting the power cord
Connect the power cord to the AC outlet.
Operate only from the power source indicated on the rear of the TV.
5 SETUP TOUR
When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the SETUP TOUR
function on the “MENU 3” menu. For details, see page 13.
1Press the Main power button on the TV.
The POWER lamp or POWER/ON TIMER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the language setting mode.
• Illustration of AV-14F116
ON TIMER POWER
POWER lamp Main power button
2Press the MENU Mbuttons to select the on-screen language.
3Press the MENU y button.
The AUTO PROGRAMMING function will start and the indicator blinks.
DISPLAY button
MENU -/+ |
MENU / |
|
buttons |
||
buttons |
||
|
•To stop the AUTO PROGRAMMING function, press the MENU m buttons. When you press stop, it will display “SETUP TOUR THANK YOU!”.
When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO PROGRAMMING function operation is completed.
6 |
• If a TV channel you want to view is not set to the channel, set it with the MANUAL CH |
PRESET function. For details, see page 14. |
Loading...