IMPRESSA F50/F5/F505
Instructions for use
Art. Nr. 66381
8/06
Legend:
DISPLAY: serves as information.
DISPLAY: please follow the instructions shown.
|
|
|
|
|
|
|
JURA Elektroapparate AG, CH-4626 Niederbuchsiten, |
|
|
|
|
|
|
|
|
|
|
= Note |
|
= Important |
|
= Tip |
Internet http://www.jura.com |
|
|
|
|
||||
|
|
|
|
Fig. 1
Fig. 6 |
Fig. 11
Fig. 16
Fig. 2 |
Fig. 3 |
Fig. 4 |
Fig. 5 |
|
Fig. 7 |
|
|
Fig. 8 |
|
|
Fig. 9 |
|
|
Fig. 10 |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 12 |
Fig. 13 |
Fig. 14 |
Fig. 15 |
Fig.17 |
|
|
|
11 |
22 |
|
|
|
|
13 |
|
Rotary Switch |
|
|
|
|
|
12 |
|
10 |
3 4 5 6 7 8 |
13 |
|
9 |
|||
|
|||
2 |
|
14 |
|
1 |
|
15/16 |
|
|
|
||
|
|
17 |
|
|
|
18 |
|
21 |
|
|
|
|
|
19 |
|
|
|
20 |
Control elements
1.Rotary Switch
2.Illuminated ring
3.ON/OFF key
4.Programming key
5.Draw-off key 1 cup
6.Draw-off key 2 cups
7.Maintenance key
8.Steam pre-selection key
9.Display dialog system
10.Water tank with carrying handle
11.Filler funnel for pre-ground coffee:
12.Bean tank cover
13.Aroma preservation cover
14.Steam/hot water draw-off valve
15.Easy-Auto-Cappuccino Frother with milk pipe
16.Interchangeable hot water nozzle (see Fig. 5)
17.Height-adjustable coffee spout
18.Coffee grounds container
19.Drip grate
20.Drip tray
21.Power Switch
22.Metal shelf
Contents
1. |
Safety information.......................................... |
page |
6 |
|
15.1 |
Programming the filter ........................... |
page 15 |
|
|
|
1.1 |
Warning |
page |
6 |
|
15.2 |
Programming the water hardness |
page 15 |
|
|
|
|
|||||||
|
1.2 |
Precautions .......................................... |
page |
6 |
|
15.3 |
Programming the aroma ROBUST |
|
E |
2. |
Preparing the IMPRESSA................................ |
page |
6 |
|
|
or STANDARD ..................................... |
page 15 |
||
|
2.1 |
Check supply voltage .............................. |
page |
6 |
|
15.4 |
Programming the temperature .................. |
page 16 |
|
|
2.2 |
Check electrical fuse .............................. |
page |
6 |
|
15.5 |
Programming the time............................ |
page 16 |
|
|
2.3 |
......................................Fill water tank |
page |
7 |
|
15.6 |
Programming the automatic |
|
|
|
2.4 |
Fill coffee beans.................................... |
page |
7 |
|
|
switch-on time ...................................... |
page 17 |
|
|
2.5 |
Adjusting the grinding gear ..................... |
page |
7 |
|
15.7 |
Programming the automatic |
|
|
|
2.6 |
Power switch ........................................ |
page |
7 |
|
|
switch-off time...................................... |
page 17 |
|
3. |
First use....................................................... |
page |
7 |
|
15.8 |
Cup counter ......................................... |
page 18 |
|
|
4. |
Adjusting the water hardness ............................ |
page |
8 |
|
15.9 |
Programming the language ...................... |
page 18 |
|
|
5. |
Installation of CLARIS plus filter cartridges ........ |
page |
9 |
|
15.10 |
Programming Display 24H/AM/PM ........... |
page 18 |
|
|
|
5.1 |
Installing the filter ................................ |
page |
9 |
|
15.11 |
Programming the display for ML/OZ.......... |
page 19 |
|
|
5.2 |
Replacing the filter ................................ |
page |
9 |
16. |
Maintenance ................................................. |
page 19 |
|
|
6. |
Rinsing the IMPRESSA................................... |
page 10 |
|
16.1 |
Filling in water ..................................... |
page 19 |
|
||
7. |
Adjusting the water quantity for coffee................ |
page 10 |
|
16.2 |
Emptying the coffee grounds container ....... |
page 19 |
|
||
8. |
Drawing off 1 cup of coffee .............................. |
page 10 |
|
16.3 |
Drip tray missing................................... |
page 20 |
|
||
9. |
Drawing off 2 cups of coffee ............................. |
page 11 |
|
16.4 |
Fill coffee beans.................................... |
page 20 |
|
||
10. |
Drawing off pre-ground coffee ........................... |
page 11 |
|
16.5 |
Replacing the filter ................................ |
page 20 |
|
||
11. |
Drawing off hot water ..................................... |
page 12 |
|
16.6 |
Cleaning the IMPRESSA ........................ |
page 20 |
|
||
12. |
Drawing off steam .......................................... |
page 12 |
|
16.7 |
IMPRESSA decalcify ............................. |
page 20 |
|
||
13. |
Dispensing Cappuccino with the |
|
|
|
16.8 |
General cleaning instructions ................... |
page 20 |
|
|
|
Easy-Auto-Cappuccino Frother .......................... |
page 13 |
|
16.9 |
Emptying the system .............................. |
page 21 |
|
||
|
13.1 |
Cleaning the Easy-Auto-Cappuccino |
|
|
17. |
Cleaning....................................................... |
page 21 |
|
|
|
|
Frother ............................................... |
page 14 |
18. |
De-scaling..................................................... |
page 22 |
|
||
|
13.2 |
Rinsing the Easy-Auto-Cappuccino |
|
|
19. |
Disposal ....................................................... |
page 23 |
|
|
|
|
Frother ............................................... |
page 14 |
20. |
Tips for perfect coffee ..................................... |
page 23 |
|
||
|
13.3 |
Cleaning the Easy-Auto-Cappuccino |
|
|
21. |
Messages...................................................... |
page 24 |
|
|
|
|
Frother ............................................... |
page 14 |
22. |
Problems ...................................................... |
page 25 |
|
||
14. |
Switching off the IMPRESSA ........................... |
page 15 |
23. |
Legal information ........................................... |
page 26 |
|
|||
15. |
Programming ................................................ |
page 15 |
24. |
Technical Data............................................... |
page 26 |
|
5
Introduction
Thank you for purchasing the IMPRESSA. To ensure perfect functioning of your IMPRESSA, carefully read this operating manual and keep it for future reference.
Should you need more information or if you encounter particular problems not specified in these operating instructions in sufficient detail, either contact us directly or contact your local authorized dealer.
You will also find useful tips on operation and maintenance of your IMPRESSA on the website at www.jura.com. Don’t forget to check out the Knowledge Builder our animated operating instructions. LEO, our assistant, will take you through all the functions.
1. Safety information
1.1 Warning
Children do not realize the dangers involved in using electric appliances, for this reason always keep an eye on children when they use electric appliances.
The coffee machine may only be used by instructed persons.
Never use a defective coffee machine or a machine with a defective mains cable.
Never repair or open the coffee machine yourself. Any repairs may only be carried out by authorized service shops using original spare parts and accessories.
Never immerse the coffee machine in water.
1.2 Precautions
Never expose the coffee machine to weather (rain, snow, frost), never touch the machine when your hands are wet.
Place the IMPRESSA on a firm, level base that is resistant to any water that may leak. Never stand on hot or warm surfaces (oven hobs). Keep out of the reach of children.
If you don’t use the machine for a longer time (holidays, etc.) always disconnect the mains cable.
Always disconnect mains cable before cleaning the machine.
When disconnecting the mains cable never pull on the mains cable or the machine itself.
The coffee machine is connected to mains supply via a mains cable. Make sure nobody can trip over the mains cable. Make sure children and pets cannot reach the machine
Never put the coffee machine or individual parts of it into a dishwasher.
Make sure to install the machine at a place with sufficient air circulation, to prevent overheating of the machine.
2. Preparing the IMPRESSA
2.1 Check supply voltage
The IMPRESSA is preset in the factory to the correct mains voltage. Check if your local mains supply voltage complies with the information given on the type plate on the underside of the IMPRESSA.
2.2 Check electrical fuse
The IMPRESSA is designed for an electric current of 10 amperes. Check if the electrical fuse has sufficient capacity.
6
2.3 Fill water tank
Only use fresh, cold water. Never fill in milk, mineral water or other liquids.
Remove the water tank and rinse it with cold tap water thoroughly (Fig. 4).
Then fill the water tank and reinstall it. Make sure to install the tank properly, it must engage audibly.
2.4 Fill coffee beans
To ensure that your machine will work perfectly for a long time and to avoid damage, please note that the grinding gear of your JURA coffee machine is not suitable for coffee beans which were treated, during or after roasting, with additives (e.g. sugar). Such coffee blends may damage the grinding gear. Any repair costs resulting from the use of such blends are not covered by warranty.
Open the bean tank cover (12) and remove the aroma preservation cover (13).
Remove any dirt or foreign matter from the bean tank.
Fill coffee beans in the bean tank and close the cover.
2.5 Adjusting the grinding gear
You can adjust the grinding gear to the roast of your coffee. We recommend
a fine grinding degree |
for bright roasts (the smaller the dots, |
|
the finer the grinding) |
a coarse degree |
for dark roasts (the larger the dots, the |
|
coarser the grinding) |
The grinding degree may only be adjusted while the grinding gear is running.
Open the bean tank cover (12) and remove the aroma preservation cover (13).
To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to the required position.
2.6 Power switch |
E |
Actuate the power switch (21) on your IMPRESSA before using the machine for the first time.
We recommend that you switch off your IMPRESSA with the power switch (21) if you intend not to use the machine for longer periods of time (e.g.during holidays)
3. First use
Fill coffee beans in the bean tank (12).
Switch on the IMPRESSA using the ON/OFF key (3).
SPRACHE DEUTSCH
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until the required language is displayed.
For example |
LANGUAGE |
|
ENGLISH |
Confirm your selection by pressing the Rotary Switch (1).
FILL WATER
Fill the water tank (10) with fresh water.
OPEN TAP
Place a receptacle under Easy-Auto-Cappuccino Frother (15) (Fig. 10).
Open the steam / hot water draw-off tap (14) (Fig. 13).
7
FILLING SYSTEM
CLOSE TAP
Close the steam / hot water draw-off tap (14).
HEATING
PRESS RINSE
Press the maintenance key (7).
Machine carries out a rinsing operation.
RINSING
READY
If BEANS FILL is displayed, press the coffee draw-off key again. Machine not filled with coffee beans yet.
To get an excellent crema, adjust the coffee spout (17) to the size of your cup (Fig. 3).
4. Adjusting the water hardness
Water is heated in the IMPRESSA. As a result, calcification occurs during normal use and is indicated automatically. Before using the IMPRESSA for the first time the hardness of the water used must be adjusted. Use the supplied test sticks for this.
1° German hardness is equivalent to 1.79° French hardness.
If the filter is activated, the program step Water Hardness no longer appears.
The IMPRESSA has 5 hardness degrees which can be used and are displayed while you are adjusting the water hardness.
The displayed information means the following:
LEVEL –– Water hardness function switched off
LEVEL 1 German water hardness degree 1 to 7° French Water hardness degree 1.79 – 12.53°
LEVEL 2 German water hardness degree 8 to 15° French Water hardness degree 14.32 – 26.85°
LEVEL 3 German water hardness degree 16 to 23° French Water hardness degree 28.64 – 41.14°
LEVEL 4 German water hardness degree 24 to 30° French Water hardness degree 42.96 – 53.7°
When the IMPRESSA leaves the factory it is adjusted to LEVEL 3. You can adjust another hardness. To do this, proceed as follows:
READY
Press the programming key (4), illuminated ring (2) is active.
FILTER
Turn the Rotary Switch (1) until the following message is displayed:
HARDNESS
Now press the Rotary Switch (1) to start the programming.
LEVEL 3
Turn the Rotary Switch (1) until the required level is displayed.
For example, LEVEL 4
Press the Rotary Switch (1) to confirm the required level.
HARDNESS
Press the programming key (4) to quit the programming mode.
READY
8