DEMO MODE USER’S MANUAL
Premium High Definition Touch Screen Communicating Control
Models: S1-TTSCC01
POWER-UP SEQUENCE
The communicating control will load the following screens upon initial power up:
Screen 1 – Set date and time by selecting a field and using the up/down arrows provided. See figure at right.
Screen 2 – The control will display the Software Revision.
Screen 3 – The control “listens” for network traffic for a random interval between 1 – 10 seconds. Screen 4 – The control “gathers” system information.
Screen 5 – Set the Mode of Operation to Demo Mode. See figure at right. Screen 6 – Select the type of indoor equipment to demo.
Screen 7 – Select the type of outdoor equipment to demo.
NON-ADJUSTABLE SETTINGS/FUNCTIONALITY
Homeowner:
Setting / Functionality |
Access Path |
Notes |
View Equipment / Accessory Details |
Menu > Status |
Device icons are not selectable. |
Service:
Setting / Functionality |
Access Path |
Notes |
View Equipment / Accessory Details |
Main Status screen |
Device icons are not selectable. |
Edit Dealer Information / Logo |
Menu > Tools/Settings > Dealer Information |
Edit button is not present. |
System Event:
The communicating control will display the following system event 2 minutes after power up:
Air Filter Reminder Expired – applies to all systems
Equipment Faults:
The communicating control will display the following equipment faults 3 and 4 minutes after power up: Limit Switch Open – applies to all Air Handler applications
Soft Limit Warning – applies to all Furnace applications Ambient Sensor Open – applies to all Heat Pump applications HPS Lockout – applies to all Air Conditioner applications
Status Screen:
With each Refresh button press, the system will toggle through pre programmed states for all devices:
9 States – applies to Heat Pump application |
|
|
|||
|
|
|
|
|
|
|
|
UV |
EAC |
|
|
Thermostat |
Humidifier |
(HP4) |
(HP15) |
AH |
AC |
ON |
OFF |
ON |
OFF |
FAULT |
OFF |
|
|
|
|
|
TIME |
ON |
OFF |
ON |
ON |
FAN |
DELAY |
ON |
OFF |
10% |
10% |
FAN |
LO COOL |
ON |
OFF |
10% |
10% |
FAN |
HI COOL |
ON |
ON |
ON |
ON |
FAN |
LO HEAT |
ON |
ON |
ON |
ON |
FAN |
HI HEAT |
ON |
OFF |
10% |
10% |
4.8KW |
DEFROST |
ON |
10% |
10% |
10% |
14.4KW |
HI HEAT |
ON |
10% |
ON |
ON |
14.4KW |
FAULT |
6 States – applies to Air Conditioner applications
|
Humidifier |
|
|
|
|
Thermostat |
(AC8) |
UV |
EAC |
AH |
AC |
ON |
OFF |
ON |
OFF |
FAULT |
OFF |
|
|
|
|
|
TIME |
ON |
OFF |
ON |
ON |
FAN |
DELAY |
|
|
|
|
|
LO |
ON |
OFF |
10% |
10% |
FAN |
COOL |
|
|
|
|
|
HI |
ON |
OFF |
ON |
10% |
FAN |
COOL |
ON |
10% |
ON |
ON |
4.8KW |
OFF |
ON |
ON |
ON |
ON |
14.4KW |
FAULT |
AVAILABLE SETTINGS
Reference the User’s Information and Installation Manuals for adjusting the all other settings not listed above.
Subject to change without notice. Published in U.S.A.
Copyright © 2010 by Johnson Controls, Inc. All rights reserved.
Johnson Controls Unitary Products
5005 York Drive
Norman, OK 73069