John Lewis JLBICH602 User Manual

JLBICH602

built-in ceramic hob

Instruction manual

Important Safety Information

1It is most important that this instruction manual should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before use or installation by a qualified person. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance.

Installation

•This hob must be installed by qualified and competent personnel to the relevant National Standards.

•Refer to Installation Information in chapter “Installation”.

•Remove all packaging, both inside and outside the hob, before using the hob.

•The appliance must not be used as a work surface or as a storage surface.

•Additions or modifications to the appliance are not permitted. Repairs to the appliance must only be carried out by trained registered service engineers.

•Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic film, plastic, aluminium) on or near the appliance.

•Built-in appliances may only be used after they have been built in to suitable built-in units and work surfaces that meet the relevant National Standards.

•In the event of faults with the appliance or damage to the glass ceramic (cracks, scratches or splits), the appliance must be switched off and disconnected from the electrical supply to prevent the possibility of an electric shock.

Child safety

•Small children must be kept away from the appliance.

•Only allow older children to use the appliance with adult supervision.

•Cookware made of cast iron, cast aluminium or with damaged bottoms can scratch the ceramic glass if pushed across the surface.

•Objects that melt and things that boil over can burn onto the ceramic glass and should be removed straightaway.

•Do not use the cooking zones with empty cookware or without cookware.

Maintenance and Cleaning

•Only clean this hob in accordance with the instructions.

•For cleaning, the appliance must be switched off and cooled down.

•For safety reasons, the cleaning of the appliance with steam jet or high-pressure cleaning equipment is not permitted.

•Always allow the hob to cool down and switch off the electrical supply before carrying out any cleaning or maintenance work.

Service

•This hob should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.

2 Environmental Information

Use

•This hob is intended for domestic cooking only. It is not designed for commercial or industrial purposes.

•Remove stickers and film from the glass ceramic.

•There is the risk of burns from the appliance if used carelessly.

•Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware.

•Overheated fat and oil can ignite quickly. When cooking with fat or oil (e.g. frying chips) do not leave the appliance unattended.

•Switch the cooking zones off after each use.

•The ceramic glass can be damaged by objects falling onto it.

•The edge of the ceramic glass can be damaged by being knocked by the cookware.

•After installation, please dispose of the packaging with due regard to safety and the environment.

•When disposing of an old appliance, make it unusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.

•The symbol Won the product or on its packaging indicates that this product should not be treated as normal household waste. Instead it shall be handed over to an approved collection facility for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

2

Contents

For the User

Important Safety Information- -														-	-	-	- -		2
Description of the Appliance												-	-	-	-	-	- -		4
The Control Panel - -							-	- -		- -		- -		-	-	-	- -		9
Touch Control sensor fields -							-	-	-	-	-	- -		-	-	-	- -		9
Displays - - - - - -		-	-		- -		-	- -		- -		-	-	-	-	-	- -		9
Residual heat indicator				-	-	-	-	- -		- -		- -		-	-	-	- -		10
Switching the appliance on and off -										-	-	-	-	-	-	-	-	-	10
Selecting the cooking zone						-	-	-	-	-	-	-	-	-	-	-	-	-	10
Selecting the heat setting					-	-	-	-	-	-	-	-	-	-	-	-	-	-	10
Using the child safety device -							-	-	-	-	-	-	-	-	-	-	-	-	11
Safety cut-out - -	-	-		-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	12
When the hob is first installed													-	-	-	-	-	-	13
Hints and Tips on cooking and frying -											-	-	-	-	-	-	-	-	14
Cookware - - - - -		-	-		- -		-	- -		- -		-	-	-	-	-	-	-	14
Energy saving - -	-	-		-	-	-	-	-	-	-	-	-	-	-	-	-	- -		14
Cooking chart-		-	-		- -		-	- -		- -		- -		-	-	-	- -		15
Cleaning the hob -					- -		-	- -		- -		- -		-	-	-	- -		16
Cleaning the appliance after each use-											-	-	-	-	-	-	- -		16
Removing deposits -		-		-	- -		-	- -		- -		- -		-	-	-	- -		16
Something not working- -										- -		- -		-	-	-	- -		17
Repairs - After Sales Service-												- -		-	-	-	- -		18
Spare parts -	-	-		-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	18
Rating Plates	-	-		-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	19

For the Installer

Installation - - - - - - - - - - - - - - - - - - -																			5
Technical Data -	-	-	-	-	- - - - - - - - - - -											-	-	-	5
Electrical Connection - - - - - - - - - - - - -																-	-	-	5
Electrical Requirements - -						-	-	-	-	-	-	-	-	-	- - - -				5
Building In -	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	6

Guide to use the Instruction Manual

The following symbols will be found in the text to guide you throughout the Instructions:

1 Safety Instructions

3 Hints and Tips

2 Environmental Information

5 This appliance complies with the following

E.E.C. Directives:

73/23 - 90/683

(Low Voltage Directive);

93/68 (General Directives)

89/336 (Electromagnetical Compatibility Directive)

and subsequent modifications

3

Description of the Appliance

Cooking surface layout

Single cooking zone	Single cooking zone
1200W	1800W

Single cooking zone	Control panel	Single cooking zone
2300W		1200W

4

Installation

	Technical Data		Cooking rings
	Appliance dimensions		Position	Diameter	Power
			Front left	210mm	2300W
	Width	590 mm	Rear left	145mm	1200W
			Rear right	180mm	1800W
	Depth	520 mm
			Front right	145mm	1200W
	Height	47 mm
	Worktop cut-out dimensions		Connection voltage		230 V ~ 50Hz
			Maximum connected load power		5,8kW
	Width	560 mm
	Depth	490 mm

Electrical Connection

1 This hob must be earthed.

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E. Regulations and local Electricity Board regulations. For your own safety this should be undertaken by a qualified electrician, e.g. your local Electricity Board, or a contractor who is on the roll of the National Inspection Council for Electrical Installation Contracting (NICEIC).

Electrical Connection

The hob is designed to be connected to 230 V (50 Hz) electricity supply. Before connecting to the mains supply ensure that the mains voltage corresponds to the voltage on the rating plate underneath the hob.

For UK only

It is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

1 The switch must not break the yellow and green earth cable at any point.

It is necessary that the yellow / green earth wire is about 2 cm longer than the live and neutral ones.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 60°C above the ambient temperature.

Before the hob is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed.

The manufacturer disclaims any responsibility should these safety measures not be carried out.

5

Building In

1 The hob must be installed according to the instructions supplied by qualified and competent personnel to the relevant National Standards.

Building In

•The dimensions of the cut-out section and recess required must be as shown in the relevant diagrams.

•Proper arrangements must be made of a continuous supply of air to the hob to prevent overheating.

•Clean the worktop in the area of the cut-out section.

•Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side. When you have cut it to length (add a few mm), press the two ends flush up against one another.

•A protective floor must be installed under the appliance.

6