JLTDC01
condenser dryer with heat pump
Instruction manual
1Important Safety Information
It is most important that this instruction manual should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings. These warnings have been provided in the interest of safety. You MUST read them carefully before use or installation by a qualified person. If you are unsure of the meanings of these warnings contact the John Lewis branch from which you purchased the appliance.
Installation
•The appliance is heavy. Care should be taken when moving it.
•It is dangerous to alter the specifications or attempt to modify this product in any way.
•Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
•Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
•If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.
•If the tumble dryer is placed on top of a washing machine, it is compulsory to use the stacking kit (optional accessory).
Child safety
•This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.
•Pets and children have been known to climb into tumble dryers. Please check your drum before use.
•Keep all packaging well away from children.
•When the appliance is to be scrapped, cut off the electrical supply cable and destroy the plug with the remaining cable. Disable the door catch in order to prevent children from becoming trapped inside while playing.
Use
•Do not overload the appliance (see programme chart).
•Clothes which are dripping wet should not be placed in the dryer.
•Risk of fire: items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in the tumble dryer.
•If you have washed your laundry with stain remover you must execute an extra rinse cycle before loading your tumble dryer.
•As some bulky items such as duvets and eiderdowns should be dried in large commercial machines because of their bulk, check with the manufacturer of the item if it is suitable for drying in a domestic machine, even if the dry weight of the item is within the limit advised.
•Please make sure that no gas lighters have accidentally been left in pockets of garments to be loaded into appliance.
•Danger of explosion: Never tumble dry items that have been in contact with flammable solvents (petrol, methylated spirits, dry cleaning fluid and the like). As these substances are volatile, they could cause an explosion. Only tumble dry items washed with water.
•In order to avoid danger of fires caused by excessive drying, do not use appliance to dry the following items: Cushions, quilts and the like (these items accumulate heat).
Items containing rubber foam or materials similar to rubber foam.
•Leave the door slightly ajar when the appliance is not beeing used. This will allow the seal to be preserved.
•Do not allow fluff to accumulate around the dryer.
•Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexpirienced persons may cause injury or serious malfunctioning. Contact the telephone number given under Repairs - After Sales Service (page 23).
Always insist on genuine John Lewis spare parts.
Maintenance and Cleaning
•Clean fluff filters after using tumble dryer. To prevent fire risks, do not use the appliance if the fluff filters are damaged.
•Switch off the dryer before all cleaning, care or maintenance work. Also disconnect the mains plug from the socket or – with permanent connections – switch off the LS switch in the fuse box and/or remove the fuse.
•Do not spray down the dryer with jets of water. Risk of electric shock!
Service
•This dryer should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.
2
2 Ecological hints
To save energy we recommend that you follow these hints:
•Try to load the maximum capacity of the machine as small loads are uneconomical.
•Always load well spun laundry. The higher the spin speed, the lower the electricity consumtion and the shorter the drying times.
•Do not over-dry laundry, this avoids creasing and saves energy.
•Clean the filters regularly to avoid excessive drying times and high electricity consumption.
•The room should be well ventilated for the tumble dryer to operate efficiently. The room temperature should not exceed +35°C during drying.
2 Environmental Information
•After unpacking please dispose of the packaging with due regard to safety and the environment.
•Materials marked with the symbol g are recyclable.
•Check with your local Council or Environmental Health Office to see if there are facilities in your area for recycling this appliance.
•When the appliance is to be scrapped, cut off the power supply cable and make the door closing device unusable to prevent young children from being trapped inside.
1Warning
A cut off plug inserted into a 13 amp socket is a serious safety (shock) hazard. Please ensure the cut off plug is disposed of safely.
The symbol Won the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
3
Contents
For the User
Important Safety Information
Description of the Appliance
The Control Panel
Programme Chart
Using the tumble dryer Hints & Tips on Drying Maintenance and Cleaning
External cleaning
Cleaning the filters
Cleaning the door
Cleaning the door seal
Cleaning the fluff filter
Emptying the water reservoir
Cleaning the drum
Clean operating screen and housing Changing the bulb for interior lighting
Programming options
Something Not Working
Repairs - After Sales Service
Spare Parts
For the Installer
2 |
Installation |
6 |
|
5 |
Technical Specifications |
6 |
|
10 |
Unpacking |
7 |
|
12 |
Transporting the appliance |
7 |
|
Positioning |
7 |
||
13 |
Stacking kit (optional accessory |
7 |
|
Door reversal |
8 |
||
|
|||
15 |
Electrical connection |
9 |
|
|
|||
16 |
|
|
|
16 |
|
|
|
16 |
|
|
|
16 |
|
|
|
16 |
|
|
|
17 |
|
|
|
18 |
|
|
|
18 |
Guide to use the Instruction Manual |
||
18 |
|||
The following symbols will be found in the text to guide |
|||
18 |
|||
you throughout the Instructions: |
|
||
19 |
1 Safety Instructions |
|
|
20 |
3 Hints and Tips |
|
|
23 |
|
|
|
23 |
2 Environmental Information |
|
|
5 This appliance complies with the following
E.E.C. Directives:
-73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
-89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
4
Description of the Appliance
Water reservoir |
Display panel |
|
|
Fine strainer |
|
|
(lint filter) |
|
Lamp for interior |
|
|
illumination |
|
|
Micro-fine filter |
Large mesh filter |
|
(lint filter) |
(lint filter) |
|
Rating plate |
|
|
|
Loading door |
|
Base door |
(reversible) |
|
|
||
upstream of |
|
|
fluff filter and |
Screwed feet |
|
heat exchanger |
||
(with height |
||
|
||
|
adjustment) |
|
|
Air slots |
5
Installation
1It is dangerous to alter the specifications or attempt to modify this product in any way.
1Care must be taken to ensure that the appliance does not stand on its electrical supply cable.
1Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
Technical Specifications
|
Height |
85 cm (33.5’’) |
|
DIMENSIONS |
Width |
60 cm (23.6’’) |
|
|
Depth |
60 cm (23.6’’) |
|
|
|
|
|
POWER SUPPLY VOLTAGE |
|
230-240 V/50 Hz |
|
TOTAL POWER ADSORBED |
|
1200 W (6 A) |
|
|
|
|
|
MAX LOAD CAPACITY |
Cotton, linen |
6kg (13.2 lbs) |
|
Synthetics |
3kg (6.6 lbs) |
||
|
|||
|
|
|
|
DRUM VOLUME |
|
108 l |
|
|
|
|
|
|
Cotton, linen |
2.1 kWh (6kg cupboard dry) |
|
CONSUMPTIONS |
Cotton, linen |
1.7 kWh (6kg iron dry) |
|
|
Synthetics |
0.9 kWh (3kg cupboard dry) |
|
|
|
|
6
Unpacking
Warning!
1Slide out the polystyrene bag containing the polystyrene block before using the appliance. Pull off adhesive strips from inside machine on top of drum.
Keep all packaging away from children.
Positioning
It is recommended that, for your convenience, the machine is positioned close to your washing machine.
The tumble dryer must be installed in a clean place, where dirt does not build up.
To keep vibration and noise to a minimum when the dryer is in use, it should be placed on a firm, level surface.
Once in its permanent operating position, check that the dryer is absolutely level with the aid of a spirit level. If it is not, raise or lower the feet until it is.
The feet must never be removed.
Specialist accessories
The following special accessories are available from your Service Force Centre.
Stacking kit (optional accessory):
It should be possible to stack your new dryer on top of a front loading washing machine with a covers depth of 60 cm and width of 60cm.
Read carefully the instructions supplied with the stacking kit.
Please contact your local John Lewis branch for further ad-
vice. |
|
Version to be supplied: |
|
– with extractable stacker plate |
916 019 103 |
Transporting the appliance
1Warning: Only tip the appliance on its left side to transport (see illustration), if it cannot be transported in an upright position.
Installation kit for external condensate drain
Installation kit (125 122 510) for direct draining of condensate into a basin, siphon, gully, etc. The condensate tank then no longer has to be drained, it must however remain in its intended position in the machine. Refer to the “Programme options” section for how to deactivate the FULL TANK display.
Max. displacement height: 1m from the base of the dryer; max. displacement length: 3m
7
Door reversal
1Warning! The door may only be reversed by a specialist.
Instructions for qualified personnel/specialist
Warning! Before reversing the door, disconnect the mains plug; with a permanent connection: remove the fuse.
1.Open door.
2.Unscrew hinge A from the front of the machine and take off the door.
3.Carefully pry off cover plates B and C. To do this, insert a thin screwdriver into the slots as shown in the illustration, press downwards slightly and pry out the cover plates.
4.Unfasten locking block D from the snap-on fixture, take out and reinsert on the other side, having rotated the block through 180°.
5.Unscrew hinge A from the door, rotate through 180°, reinsert on the opposite side and screw down.
6.Reinsert cover plates B and C on the opposite site having first rotated them through 180°.
7.Unscrew cover plates E from the front of the machine, rotate through 180, screw on the opposite side.
8.Unscrew door lock F, push down slightly and remove from the front of the machine.
9.Press snap-in button G in and down, press cover down slightly and remove from front of the machine.
10.Transfer door lock F to the oppositeside and screw down.
11.Fix cover G on to the other side and allow the snap-in button to lock in place.
12.Insert door and hinges into recesses on the front of the machine and screw down.
Note regarding contact protection: The machine is only secure for operations again once all plastic parts have been inserted.
8
Loading...