Jet SLT-660F, SLT-1650 Operating Instructions And Parts Manual
Operating Instructions and Parts Manual
SLT-660F/1650 Scissor Lift Tables
For serial no. 17020001 and higher
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-140777
Ph.: 800-274-6848 Revision D 03/2017
www.jettools.com Copyright © 2017 JET
Warranty and Service
JET® warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please
contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday.
Warranty Period
The general warranty lasts for the time period specified in the literature included with your product or on the official
JET branded website.
• JET products carry a limited warranty which varies in duration based upon the product. (See chart below)
• Accessories carry a limited warranty of one year from the date of receipt.
• Consumable items are defined as expendable parts or accessories expected to become inoperable within a
reasonable amount of use and are covered by a 90 day limited warranty against manufacturer’s defects.
Who is Covered
This warranty covers only the initial purchaser of the product from the date of delivery.
What is Covered
This warranty covers any defects in workmanship or materials subject to the limitations stated below. This warranty
does not cover failures due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear,
improper repair, alterations or lack of maintenance. JET woodworking machinery is designed to be used with Wood.
Use of these machines in the processing of metal, plastics, or other materials may void the warranty. The exceptions
are acrylics and other natural items that are made specifically for wood turning.
Warranty Limitations
Woodworking products with a Five Year Warranty that are used for commercial or industrial purposes default to a
Two Year Warranty. Please contact Technical Service at 1-800-274-6846 for further clarification.
How to Get Technical Support
Please contact Technical Service by calling 1-800-274-6846. Please note that you will be asked to provide proof
of initial purchase when calling. If a product requires further inspection, the Technical Service representative will
explain and assist with any additional action needed. JET has Authorized Service Centers located throughout the
United States. For the name of an Authorized Service Center in your area call 1-800-274-6846 or use the Service
Center Locator on the JET website.
More Information
JET is constantly adding new products. For complete, up-to-date product information, check with your local distributor
or visit the JET website.
How State Law Applies
This warranty gives you specific legal rights, subject to applicable state law.
Limitations on This Warranty
JET LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT.
EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
JET SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR
INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR
PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
JET sells through distributors only. The specifications listed in JET printed materials and on official JET website are
given as general information and are not binding. JET reserves the right to effect at any time, without prior notice,
those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason
whatsoever. JET
Product Listing with Warranty Period
90 Days – Parts; Consumable items
1 Year – Motors; Machine Accessories
2 Year – Metalworking Machinery; Electric Hoists, Electric Hoist Accessories; Woodworking Machinery used
for industrial or commercial purposes
5 Year – Woodworking Machinery
Limited Lifetime – JET Parallel clamps; VOLT Series Electric Hoists; Manual Hoists; Manual Hoist
Accessories; Shop Tools; Warehouse & Dock products; Hand Tools; Air Tools
NOTE: JET is a division of JPW Industries, Inc. References in this document to JET also apply to JPW Industries,
Inc., or any of its successors in interest to the JET brand.
®
branded products are not sold in Canada by JPW Industries, Inc.
2
Table of Contents
Warranty and Service ............................................................................................................................................ 2
Table of Contents .................................................................................................................................................. 3
Specifications ........................................................................................................................................................ 3
Assembly ............................................................................................................................................................... 4
Operation .............................................................................................................................................................. 5
Folding Handle for SLT-660F ............................................................................................................................ 5
Maintenance .......................................................................................................................................................... 5
Replacement Parts ................................................................................................................................................ 6
Parts Breakdown for SLT-660F Scissor Lift Table ............................................................................................ 7
Parts List for SLT-660F Scissor Lift Table ......................................................................................................... 8
Parts Breakdown for SLT-1650 Scissor Lift Table .......................................................................................... 11
Parts List for SLT-1650 Scissor Lift Table ....................................................................................................... 12
IMPORTANT SAFETY INSTRUCTIONS
1. Read and understand the owner’s manual before assembly and operation.
2. Do not load scissor lift beyond its rated capacity.
3. Do not allow people to sit or ride on scissor lift.
4. Always secure load in center of table before raising, lowering or moving scissor lift.
5. Do not transport loads in the raised position.
6. Use on smooth, level, finished floors only.
7. Pull release lever fully to allow load to descend in a controlled manner.
8. Keep hands and feet clear of table when lowering load.
9. Failure to comply with the above warnings may result in personal injury and/or property damage.
Specifications
Model Number .................................................................................... SLT-660F .................................... SLT-1650
Stock Number ........................................................................................ 140777 ........................................ 140779
Capacity (lbs.) .............................................................................................. 660 ............ ................................ 1650
Maximum Height (in.) ............................................................................... 34-1/8 .......................................... 35-5/8
Minimum Height (in.) ................................................................................ 10-5/8 ................................................ 16
Table Size, L x W (in.) ................................................................ 32-1/2 x 19-5/8 ............................ 39-3/8 x 20-1/8
Wheel Diameter (in.) ........................................................................................ 5 .................................................. 5
Overall Dimensions, L x W (in.) .................................................. 42-1/2 x 19-5/8 ............................ 53-1/2 x 22-3/4
Handle Height (in.) ......................................................................................... 40 ................................................ 40
Strokes* to reach Maximum Height, approximate .......................................... 13 ................................................ 15
Net Weight – approximate (lbs.) ................................................................... 161 .............................................. 229
Shipping Weight – approximate (lbs.) .......................................................... 185 .............................................. 282
* without load
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change spec ifications at any time and without prior notice,
without incurring obligations.
3
Assembly
Note: The SLT-660F does not require any
assembly.
1. On the SLT-1650, attach the handle (A, Figure
1) to the frame using two hex cap screws, two
lock washers, two flat washers. Tighten with a
19mm wrench.
Note: The two pivoting casters can be locked
so that they do not rotate. Press foot lever (B,
Figure 1 for SLT-1650) down to lock. Press
foot lever (A, Figure 2 for SLT-660F) down to
lock.
2. Attach foot lever (A, Figure 3) to the lever
bracket (B, Figure 3) with one hex cap bolt,
one flat washer, one lock washer (C, Figure 3).
Tighten with a 14mm wrench.
Keep hand s and feet clear of
table and scissor lift openings while
lowering load. Failure to co mply may cause
serious injury!
3. Pump the foot lever several cycles so that the
table is out of your way while attaching the
cable.
Note: Place a 2” x 4” board straight up and
down between the table and frame so that the
table cannot come down on you while
attaching the cable.
4. Route the cable (A, Figure 4) into the cable nut
(B, Figure 4). Run the cable through the
lowering mechanism (C, Figure 4) and pull the
cable tight. Tighten the hex nut (D, Figure 4)
using a 14mm wrench.
Note: You may have to turn the hex socket
cap screw to line up the hole. This will allow
the cable to pass through freely.
Figure 1
Figure 2
Figure 4
Figure 3
4
Operation
Maintenance
1. The table can be raised by pumping the foot
lever.
Note: You may need to raise and lower the
table several times to work any air bubbles out
of the pump.
2. To lower the table, pull the release lever f ully.
This allows the table to lower in a slow,
controllable manner.
3. Before loading, always lock the caster brake.
Folding Handle for SLT-660F
1. Lower the table.
2. Step on the rod that is located between the
lower sections of the handle.
3. Fold the handle flat across the table.
1. Lubricate each friction point monthly with #2
tube grease.
2. Check the movement and wear of wheels.
3. Check for oil leakage from the hydraulic
cylinder. Add hydraulic oil as needed.
4. Always store with table in lowered position
when not in use.
5
Loading...