Jensen Mobile Multimedia AM/FM/DVD Receiver VM9410 Owner's Manual

SRC

PWR

VM9410

VM9410

ENTER

Push

AV AUX IN

7-INCH TFT

OPEN

DVD-R

LO/DX

2-6CH

VM9410

Owner’s Manual

ii

Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s
manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to
use all the features of your new Jensen VM9410 Mobile Multimedia AM/FM/DVD Receiver for
maximum enjoyment.

Preparation............................................................................................. 1

Features........................................................................................................................ 1

Tools and Supplies........................................................................................................ 1

Disconnecting the Battery............................................................................................. 1

Installation.............................................................................................. 2

Pre-installation .............................................................................................................. 2

Wiring............................................................................................................................ 2

Final Installation............................................................................................................ 2

Final ISO-DIN Installation.............................................................................................. 2

Controls and Indicators......................................................................... 4

Button Operation........................................................................................................... 4

Controls and Indicators......................................................................... 5

Controls and Indicators......................................................................... 6

LCD Display/Indicators.................................................................................................. 6

FRONT ZONE Remote Control.............................................................. 7

Rear Zone Remote COntrol................................................................... 9

Using the TFT Monitor......................................................................... 10

Open/Close TFT Monitor............................................................................................. 10

TFT Monitor Auto Open .............................................................................................. 10

Reverse Driving Use................................................................................................... 10

Monitor Tilt Angle Adjustment..................................................................................... 10

Aspect Ratio................................................................................................................ 10

Image Setting.............................................................................................................. 10

Parking Brake Inhibit................................................................................................... 10

Monitor Movement Mechanism................................................................................... 10

operating instructions......................................................................... 11

Power On / Off ............................................................................................................ 11

Audible Beep Confirmation ......................................................................................... 11

Mute............................................................................................................................ 11

Playing Source Selection............................................................................................ 11

Volume Adjustment..................................................................................................... 11

Audio Control Menu .................................................................................................... 11

Six-Channel Audio Control.......................................................................................... 11

Rear Zone................................................................................................................... 11

System Reset.............................................................................................................. 11

Line Mute .................................................................................................................... 11

System Setup Menu............................................................................. 12

General Setup Menu................................................................................................... 12

ASP (Audio Sound Processing) Config Menu............................................................. 12

Exiting the System Setup Menu.................................................................................. 13

Tuner Operation................................................................................... 14

Tuner TFT Display ..................................................................................................... 14

Tuner LCD Display.... ................................................................................................. 14

Switch to Radio Tuner source.................................................................................... 14

Select FM/AM Band................................................................................................... 14

Auto Tuning................................................................................................................ 14

Seek Tuning............................................................................................................... 14

Manual Tuning ........................................................................................................... 14

Using Preset Stations................................................................................................. 14

Auto Store (AS).......................................................................................................... 14

Local Radio Station Seeking (LOC) ........................................................................... 14

DVD Player Operation ......................................................................... 15

Opening/Closing the TFT Video Screen .................................................................... 15

DVD LCD Display....................................................................................................... 15

Insert/Eject Disc......................................................................................................... 15

Ejecting a Disc ........................................................................................................... 15

Reset the Loading Mechanism................................................................................... 15

Controlling Playback .................................................................................................. 15

Accessing the DVD Menu.......................................................................................... 15

Moving Through Chapters.......................................................................................... 15

Fast Forward/Fast Reverse........................................................................................ 15

Scanning.................................................................................................................... 15

Alternating Between 2-Channel and 6-Channel Mode............................................... 15

Goto Search............................................................................................................... 16

Direct Chapter / Track Selection ................................................................................ 16

Viewing an Alternate Picture Angle (DVD Only) ........................................................ 16

Zooming..................................................................................................................... 16

Multi-Language Discs (DVD Only)............................................................................. 16

PBC (Play back Control) (VCD Only)......................................................................... 16

Playback Information.................................................................................................. 16

General Disc Information ........................................................................................... 17

DVD Setup Menu.................................................................................. 18

Accessing the DVD Setup Screen ............................................................................. 18

LANGUAGE Menu..................................................................................................... 18

VIDEO Menu.............................................................................................................. 18

AUDIO Menu.............................................................................................................. 18

SPK (Speaker) CONFIG Menu.................................................................................. 19

RATING (Parental Lock) Menu .................................................................................. 19

CD Player/Changer Operation ............................................................ 20

MP3/WMA Operation................................................................................................. 20

CD Changer Operation .............................................................................................. 20

Troubleshooting .................................................................................. 21

Error Messages.......................................................................................................... 22

Care and Maintenance............................................................................................... 22

Specifications ...................................................................................... 23

CEA Power Ratings ................................................................................................... 23

CONTENTS

VM9410

1

PREPARATION

Congratulations on your purchase of the Jensen VM9410
Mobile Multimedia AM/FM/DVD Receiver.

It’s a good idea to read all of the instructions before beginning
the installation. We recommend having your Jensen VM9410
installed by a reputable installation shop.

Features

1. 1 DIN Size.

2. Ultra slim slot-in DVD core mechanism.

3. 7 inch Panasonic TFT monitor.

4. Built-in 4X40W power amplifier audio output.

5. Multi-zone independent playing with a maximum of 3­zone independent playing (eg.Front Zone: radio as the
background; Rear Zone: playback DVD).

6. Supports optional external CD changer.

• Select previous/next disc.

• Playback previous/next chapter.

• Direct track/chapter selection.

• Single track/chapter and disc replay.

• Random playback/scan.

7. AM/FM tuner.

• Auto/Manual search for radio station and pre-set

station memory.

• 30 pre-set radio stations (12 AM/18 FM).

• Distant/Local radio station seeking.

8. Multiple video System with Auto/Manual PAL and NTSC
video system selection.

9. Dual LCD Display.

10. Wide screen TFT display and segment LCD display.

11. FULL, WIDE, and NORMAL screen modes.

12. TFT automatic mechanism – Simply press a button to
adjust the TFT monitor display angle in full range or step
by step. Last position memory recalls your favorite
viewing position.

13. Auto-activated rear view video camera – Reverse
driving automatically activates the TFT monitor and the
rear view video camera; the Image captured from the
camera is displayed.

14. TFT monitor mechanism overload protection – If the
TFT monitor becomes overloaded by a blocked or
unclear moving path, its motion is ceased automatically
to protect the mechanism.

15. Fully compatible with CDDA, VCD, SVCD, CD-R, CD­RW and DVD.

16. Multi-language, multi-subtitle, and multi-angle playback
options.

17. Last Playback Memory – When powering on the unit,
every setting and playing status remains the same as
when the unit was powered off.

18. Parental lock – Uses a password and disc-rating setup
to prevent unauthorized user access to irrelevant
display content.

19. Mute function – Automatically lower/mute the volume
when a dedicated external device such as GPS system
or car phone is active.

20. Joystick (5-way) control – The joystick provides easy
navigational control via a 4-directional control with a
clickable center control.

21. Rotary volume control.

22. Two independent full function IR remote controls – one
for the front zone, the other for the rear zone, without
interference.

23. Voltage overload and underloaded protection – The
operating voltage of this unit is between 10.5V and 16V.
Any supplied voltage out of this range causes the unit to
power off automatically to ensure normal operation in
any circumstance.

24. Mechanical anti-vibration system + electronic shock
protection – mechanical anti- vibration system
accompanied by a 16Mbit electronic shock protection
promotes the smoothest disc playback possible, even
under the toughest road conditions.

Tools and Supplies

You will need these tools and supplies to install your
VM9410:

• Torx type, flat-head and Philips screwdrivers

• Wire cutters and strippers

• Tools to remove existing radio (screwdriver, socket
wrench set or other tools)

• Electrical tape

• Crimping tool

• Volt meter/test light

• Crimp connections

• 18 gauge wire for power connections

• 16 – 18 gauge speaker wire

WARNING! Only connect the unit to a12-volt power
supply with proper grounding.

WARNING! Never install this unit where operation and
viewing could interfere with safe driving conditions.

WARNING! To reduce the risk of a traffic accident (except
when using for rear view video camera) never use the
video display function while driving the vehicle. This is a
violation of federal law.

WARNING! Never disassemble or adjust the unit without
the assistance of a professional. For details, please
consult your local car stereo specialty shop.

WARNING! To prevent injury from shock or fire, never
expose this unit to moisture or water.

WARNING! Never use irregular discs.

WARNING! To prevent damage to the mechanism inside
this unit, avoid impact to the TFT monitor.

WARNING! Do not change the fuse on the power cord
without professional guidance. Using an improper fuse
may cause damage to the unit and result in a fire.

WARNING! To prevent damage to the screen, avoid
touching it with your fingers or other objects.

WARNING! The monitor employs an automatic motorized
mechanism. To prevent damage to the core mechanism,
please do not push, pull or swivel the monitor manually.

Disconnecting the Battery

To prevent a short circuit, be sure to turn off the ignition and
remove the negative (-) battery cable prior to installation.

NOTE: If the VM9410 is to be installed in a car equipped
with an on-board drive or navigation computer, do not
disconnect the battery cable. If the cable is
disconnected, the computer memory may be lost. Under
these conditions, use extra caution during installation to
avoid causing a short circuit.

VM9410

2

INSTALLATION

Pre-installation

1. Press the metal levers on both sides to remove the half­sleeve from the radio.

2. Remove the transport screws.

3. Install the half-sleeve.
a. Install adapter if necessary (optional).
b. Install half-sleeve into adapter or dashboard (only

use the supplied screws). Do not force the sleeve
into the opening or cause it to bend or bow.

c. Locate the series of bend tabs along the top,

bottom and sides of the mounting sleeve. With the
sleeve fully inserted into the dashboard opening,
bend as many of the tabs outward as necessary so
that the sleeve is firmly secured to the dashboard.

d. Install support strap to make the unit more stable.

CAUTION! Be careful not to damage the car wiring.

4. Place the radio in front of the dashboard opening so the
wiring can be brought through the mounting sleeve.

Wiring

Complete wiring as illustrated in the wiring diagram on page

3. Once the wiring is complete, reconnect the battery

negative terminal. If there is no ACC available, connect the
ACC lead to the power supply with a switch.

NOTE: When replacing a fuse, be sure to use correct
type and amperage to avoid damaging the radio. The
VM9410 uses one 10 amp mini-ATM fuse, located in the
black filter box in-line with the main wire harness.

Final Installation

After completing the wiring connections, turn the unit on to
confirm operation (ignition switch must be on). If unit does not
operate, recheck all wiring until problem is corrected. Once
proper operation is achieved, turn off the ignition switch and
proceed with final mounting of the chassis.

1. Connect wiring adapter to existing wiring harness.

2. Connect antenna lead.

3. Carefully slide the radio into the half-sleeve making sure
it is right-side-up until it is fully seated and the spring
clips lock it into place.

NOTE: For proper operation of the CD/DVD player, the
chassis must be mounted within 20° of horizontal. Make
sure the unit is mounted within this limitation.

4. Attach one end of the perforated support strap
(supplied) to the screw stud on the rear of the chassis
using the hex nut provided. Fasten the other end of the
perforated strap to a secure part of the dashboard either
above or below the radio using the screw and hex nut
provided. Bend the strap to position it as necessary.

CAUTION! The rear of the radio must be supported with
the strap to prevent damage to the dashboard from the
weight of the radio or improper operation due to
vibration.

5. Replace any items you removed from the dashboard.

Final ISO-DIN Installation

1. Remove trim ring.

2. Mount factory brackets on new radio using existing
screws from old radio.

3. Slide radio chassis into dash opening and secure.

4. Reinstall dash panel.

2

1

7-INCH

T

FT

7-INCH

TFT

MODE

VM9510

MUTE

AS/PS

BAND

DISP

PWR

ENTER

AM/FM/DVD/MP3

R
ECEIVER

7-INCH

D

IGITAL

T

FT

OPEN

Push

Push

AVAUXIN

PREPARE RADIO

3d

3a

3b

3c

INSTALL HALF SLEEVE

2

1

3

4

7-INCH

T
FT

7-INCH

TFT

MODE

VM9510

MUTE

AS/PS

BAND

DISP

PWR

ENTER

AM/FM/DVD/MP3

R
ECEIVER

7-INCH

D
IGITAL

T

FT

OPEN

Push

Push

AVAUXIN

5

FINAL INSTALLATION

3

4

7-INCHTFT

7-INCH

TFT

MODE

VM9510

MUTE

AS/PS

BAND

DISP

PWR

ENTER

AM/FM/DVD/MP3

RECEIVER

7-INCH

DIGITALTFT

OPEN

Push

Push

AVAU

X
IN

2

1

FINAL ISO-DIN INSTALLATION

VM9410

3

Antenna Jack

ACC

Auto antenna control (connec t to ant enna
control lead & power supply of antenna
amplifier)

External power amplif ier c ontro l

GND

CENTER

SUB.W

SURROUND

REAR R

BATT

ACC

REVERSE +

ANT.CONT

P.CONT

PRK SW

FRONT L

FRONT R

SURROUND

REAR L

REAR L

FRONT L

FRONT R

AUX IN/L

AUX IN/R

AUX IN VIDEO

HEADPHONE L

HEADPHONE R

REAR VIDEO
OUT 1

REAR R

GREY

BLUE

RED

WHITE

PINK

YELLOW

GREEN/WHITE

BLACK

BLUE

BLUE/WHITE

WHITE/BLACK -

GREEN/BLACK -

RED

WHITE

WHITE

YELLOW

YELLOW

YELLOW

YELLOW

RED

WHITE +

GREEN +

PURPLE +
PURPLE/BL ACK -

GREY/BLACK -

GREY +

FRONT L+
FRONT L-

FRONT R+
FRONT R-

REAR R+
REAR R-

REAR L+
REAR L-

Car

Antenna

FUSE(10A)

Battery

Ignition Switch

Ground

Reverse Driving Light Gearbox Switch

Rear View Video Camera

Parking Brake Lig ht

Parking Brake Switch

Ground

External AV System

Rear Zone

Video 1

Wireless Headphone

BATTERY

External Power Amplifier

BATTERY +

Ground

WHITE

RED

RED

REAR VIDEO
OUT 2

Mute(leave open if not connected)

MUTE

BROWN

CD Changer IP-BUS Cable / BLACK

compatible with SANYO disc changers

CD Changer

Car Phone

Additional Rear

Zone Video

WIRING DIAGRAM

VM9410

4

CONTROLS AND INDICATORS

Button Operation

1. OPEN

Press the OPEN button (1) to activate the automatic
mechanical system and move the TFT monitor into viewing
position.

2. WIDE/PICTURE

Press the WIDE/PICTURE button (2) to adjust the display
aspect of the picture to one of three settings: Wide, Full or
Normal.

3. ( )

Press the button (3) to adjust the upward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the upward tilt.

4. ( )

Press the button (4) to adjust the downward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the downward tilt.

5. DSP

Press the DSP button (5) to display system information on
the screen. Press and hold this button to enter/exit System
Function set-up.

6. SEL/LOC/DX

Rotate the SEL/LOC/DX knob (6) to adjust the volume. Press
and release to enter and/or confirm audio settings. Press and
hold to activate the Local (LOC) setting.

7. POWER/MUTE

Press the POWER/MUTE button (7) once to turn the unit on.
Press again to mute the volume. Press and hold to turn the
unit off.

8. 1/DISC-

DVD Mode: Press to select audio language during playback.
TUNER Mode: Press once to play preset radio station

channel 1. Press and hold to store the current radio station in
preset channel 1.

CDC Mode: Press to play the previous disc.

9. 2/DISC+

DVD Mode: Press once to select the subtitle language during
playback.

TUNER Mode: Press once to play preset radio station
channel 2. Press and hold to store the current radio station in
preset channel 2.

CDC Mode: Press to play the next disc.

SRC

PWR

VM9410

VM9410

ENTER

Push

AV AUX IN

7-INCH TFT

OPEN

3

2

1

5

4

DVD-R

LO/DX

6

7 8 9

1010 11 12

131415 16 19

18

17

20

22

21

25

24

2326

2-6CH

VM9410

5

CONTROLS AND INDICATORS

10. 3/SCN

DVD Mode: Press once to start scan playback.
TUNER Mode: Press once to play preset radio station

channel 3. Press and hold to store the current radio station in
preset channel 3.

11. 4/REP

DVD Mode: Press once to start repeat playback.
TUNER Mode: Press once to play preset radio station

channel 4. Press and hold to store the current radio station in
preset channel 4.

12. 5/2-6CH/RDM

DVD Mode: Press once for random playback.
TUNER Mode: Press once to play preset radio station

channel 5. Press and hold to store the current radio station in
preset channel 5.

CD Mode: Press and hold to switch between 2 channel & 6
channel audio output.

13. 6/STOP

DVD Mode: Press once to stop playback.
TUNER Mode: Press once to play preset radio station

channel 6. Press and hold to store the current radio station in
preset channel 6.

14. AF/BAND/PAUSE

DVD Mode: Press to pause playback.
TUNER Mode: Press to switch between FM and AM.

15. SRC/P.MODE

Press once to select playing mode.
Press and hold to toggle rear zone mode On/0ff.

16. ( )

DVD Mode: Press once to play back previous chapter/track.
TUNER Mode: Press once to auto search for the previous

available radio station. Press and hold to decrease the tuning
frequency step by step.

MENU Mode: Press once to move the cursor to the left.

17. ( )

DVD Mode: Press once to enter the next chapter or track.
TUNER Mode: Press once to auto-search the next available

radio station. Press and hold to increase tuning frequency
step by step.

MENU Mode: Press once to move the cursor to the right.

18. ( )

DVD Mode: Press once for fast forward/fast reverse.
MENU Mode: Press once to move the cursor up.

19. ( )

DVD Mode: Press once for slow forward/slow reverse.
MENU Mode: Press once to move the cursor down.

20. PLAY/ENTER

DVD Mode: Press once to start a playback.
Press once to confirm a selection.

21. ( )

Press once for disc insertion/ejection.
Press and hold to reset core mechanism position.

22. RESET

Press to reset system settings to factory default (except the
password and parental lock setting).

23. LCD Display

24. TFT Display

25. IR Remote Control Receiver

26. AS (Auto Store/Preset Scan)

Press once to scan current radio station.
Press and hold to auto store strong radio stations in the six

preset channels.

SRC

PWR

VM9410

ENTER

Push

LO/DX

7 8 9

1010 11 12

13 15 16 19

18

17

20

22

21

25

2-6CH

6

7-INCH TFT

7-INCH TFT

AS

BAND

DISP

AM/FM/DVD/MP3 RECEIVER

7-INCH DIGITAL TFT

OPEN

1

514 2326

VM9410

6

CONTROLS AND INDICATORS

LCD Display/Indicators

1. Disc Indicator

Illuminated when disc is loaded

2. DVD Playback Indicators (SCN/RPT/RDM/ALL)

The following DVD playback indicators become Illuminated
when the corresponding function is active:

• SCN: scan playback

• RPT: repeat playback

• RDM: random playback

• ALL: playback all chapters

3. Loudness Indicator (LOUD)

The loudness indicator becomes illuminated when the LOUD
function is activated.

4. Main Display

The main display is an 8 digit, 14 segment LCD which
displays the time, tuning frequency and other text
information.

5. Channel/Disc Display

The channel/disc display is a 2 digit, 7 segment LCD display
which displays the disc number or radio channel indicators
when the corresponding function is active:

• CH: radio is activated

• DISC: DVD or CDC mode is activated

6. Stereo/Local Indicator

The stereo/local indicator illuminates one of the following
indicators when the corresponding function is active:

• ST: radio is in stereo mode

• LOC: local radio station seeking function is activated

1 2 3 4 5 6

VM9410

7

FRONT ZONE REMOTE CONTROL

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref # DVD VCD CDC TUNER CD/MP3

MENU 1 Enters the main menu

of the disc

Turns on PBC when
playing VCD

TITLE 2 Enters the title menu of

the disc

Plays first ten seconds
of each chapter/title

MUTE 3 Toggles on/off audio

output

Toggles on/off audio
output

Toggles on/ off audio
output

Toggles on/off audio
output

Toggles on/off audio
output

POWER/

4 Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off Turns the power on/off

AUDIO 5 Changes the audio lan-

guage for disc playback

REPT A-B 6 Setup to repeat play-

back from time frame A
to time frame B

Setup to repeat play­back from time frame A
to time frame B

REPT 7 Repeats playback of

current chapter

Repeats playback of
current chapter

Repeats playback of
current track

Repeats playback of

current track
SRC 8 Selects playing mode Selects playing mode Selects playing mode Selects playing mode Select s playing mode
SUBTITLE 9 Language selection for

subtitle

DISP 10 Displays playing infor-

mation

Displays playing infor­mation

Displays playing infor­mation

Displays playing infor­mation

Display playing infor-

mation
DISC

11 Plays previous disc

DISC

12 Plays next disc

ANGLE 13 Plays back disc in dif-

ferent angle for a scene

Plays back Picture CD
with different angle of
picture displayed

Plays back disc in dif­ferent angle for a scene

14 Fast forwards the disc

content

Fast forwards the disc
content

Fast forwards the disc
content

Fast forwards the disc
content

Fast forwards the disc

content
VOL - 15 Decreases volume Decreases volume Decreases volume Decreases volume Decreases volume
VOL + 16 Increases volume Increases volume Increases volume Increases volume Increases volume

17 Selects the previous

chapter for playback

Selects the previous
chapter for playback

Selects the previous
track for playback

Searches an available
radio station by
decreasing tuning fre­quency

Selects the previous

track for playback

18 Pauses playback/starts

playback

Pauses playback/starts
playback

Pauses playback/starts
playback

Scans FM/AM radio
station; plays/stores
radio station; deletes
radio station

Pauses playback/starts

playback

19 Selects the next chap-

ter for playback

Selects the next chap­ter for playback

Selects the next track
for playback

Searches an available
radio station by
increasing tuning fre­quency

Selects the next track

for playback

BAND 20 Stops playback Stops playback Stops playback Selects FM/AM band Stops playback

GOTO 21 Goes to specific time

frame and playback

Goes to specific time
frame and playback

3

4

5

9

6

7

26

27

15

16

34

33

19

32

23

24

30

31

8

35

1

2

10

13

28

25

11

12

14

20

18

17

22

21

29

NOTE: Your remote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.

VM9410

8

22 Slow playback/slow

rewind playback

Slow playback/slow
rewind playback

ZOOM 23 Zooms in/out on an

image

Zooms in/out on an
image

PIC 24 Displays set-up param-

eters

Displays set-up param­eters

OPEN/
CLOSE

25 Opens/Closes the TFT

monitor

Opens/Closes the TFT
monitor

Opens/Closes the TFT
monitor

Opens/Closes the TFT
monitor

Opens/Closes the TFT

monitor

26 Decreases monitor tilt

angle

Decreases monitor tilt
angle

Decreases monitor tilt
angle

Decreases monitor tilt
angle

Decreases monitor tilt

angle

27 Increases monitor tilt

angle

Increases monitor tilt
angle

Increases monitor tilt
angle

Increases monitor tilt
angle

Increases monitor tilt

angle
WIDE 28 Selects display mode:

WIDE, NORMAL, or
FULL

Selects display mode:
WIDE, NORMAL, or
FULL

Selects display mode:
WIDE, NORMAL, or
FULL

Selects display mode:
WIDE, NORMAL, or
FULL

Selects display mode:

WIDE, NORMAL, or

FULL
0, 1, 2, 3, 4,

5, 6, 7, 8, 9,
0 (Numeric
Keypad)

29 Directly accesses

chapter

Directly accesses track 1-6 selects preset for

current band

Directly accesses track

DVD
SETUP

30 Access DVD Setup

menu

Access DVD Setup
menu

Access DVD Setup
menu

Access DVD Setup
menu

Access DVD Setup

menu
SYS

SETUP

31 Access System Setup

menu

Access System Setup
menu

Access System Setup
menu

Access System Setup
menu

Access System Setup

menu

SEL 32

RDM 33 Plays all chapters in

random order

Plays all tracks/discs in
random order

Plays all tracks in ran-

dom order
SCN 34 Plays the first ten sec-

onds of each chapter

Plays the first ten sec-

onds of each track
EJECT 35 Ejects disc Ejects disc Ejects disc Ejects disc Ejects disc

Table 1: Front Zone Remote Control Functions

Button Function

Name Ref # DVD VCD CDC TUNER CD/MP3

VM9410

9

REAR ZONE REMOTE CONTROL

Table 2: Rear Zone Remote Control Functions

Button Function

Name Ref # DVD VCD

MENU 1 Enters the main menu of the disc Turns on PBC when playing VCD
TITLE 2 Enters the title menu of the disc Plays first ten seconds of each chapter/title
MUTE 3 Toggles on/off audio output Toggles on/off audio output
AUDIO 5 Switches the audio language for disc playback
REPT 7 Setup to repeat playback of each chapter/title/disc Setup to repeat playback of each chapter/title/disc
R.SRC 8 Selects playing mode for rear zone Selects playing mode for rear zone
SUBTITLE 9 Language selection for subtitle

14 Fast forwards the disc content Fast forwards the disc content

17 Selects the previous track/chapter for playback Selects the previous track/chapter for playback

18 Pauses playback/Starts playback Pauses playback/Starts playback
19 Selects the next track/chapter for playback Selects the next track/chapter for playback

GOTO 21 Goes to specific time frame and playback Goes to specific time frame and playback

22 Slow playback/slow rewind playback Slow playback/slow rewind playback

0, 1, 2, 3, 4,
5, 6, 7, 8, 9,
0 (Numeric
Keypad)

29 Directly accesses chapter

8

21

29

3

5

9

1

2

14

18

17

22

19

7

NOTE: Your remote control may differ slightly
from the one pictured here. The above diagram is
for illustrative purposes only.

VM9410

10

USING THE TFT MONITOR

Open/Close TFT Monitor

Open TFT Monitor

Press the OPEN button (1) on the front panel or press the
( ) button (25) of the front zone remote control to activate
the mechanism that moves the display panel into the viewing
position.

Close TFT Monitor

Press the OPEN button (1) on the front panel or press the
( ) button (25) of the front zone remote control to load the
display panel back into the compartment.

TFT Monitor Auto Open

If “TFT Auto Open” is “on” when the unit is turned on, the
monitor automatically moves to the viewing position.

If “TFT Auto Open” is ”off” when the unit is turned on, press
the OPEN button (1) or ( ) button (25) on the front zone
remote control to move the monitor into the viewing position.

Reverse Driving Use

If the rear-view video camera is connected, the unit is on, and
the monitor is stationed inside the main compartment of the
unit, the monitor automatically moves into the viewing
position and switches to CAMERA mode upon reverse
driving. When the reverse driving stops, the monitor returns
to the main storage compartment.

If the monitor is in display mode, the monitor automatically
switches to CAMERA mode upon reverse driving. When the
reverse driving stops, the monitor return to its original input
mode.

Monitor Tilt Angle Adjustment

A known characteristic of LCD panels is the quality of the
display in relationship to the viewing angle. The monitor
angle can be adjusted for optimum viewing using one of the
following methods:

Step by Step Angle Adjustment

Press the ( ) or ( ) button (3, 4) on the monitor frame to
adjust the tilt angle of the screen one step at a time.

Continuous Angle Adjustment

Press and hold the ( ) or ( ) button (3, 4) on the monitor
frame to adjust the tilt angle in a continuous motion.

Aspect Ratio

Press the WIDE button (28) on the remote control or WIDE/
PICTURE button (2) on the monitor to adjust the aspect ratio

as follows:

Image Setting

Video Output Format

Table3 shows the video output format for each playing
source.

*CVBS – Composite Video Baseband Signal

Adjustable Parameters

While in DVD or TUNER mode, the only parameter that can
be adjusted is brightness (BRIGHT). To access “PICTURE”,
“COLOR”, “CONTRAST”, and “TINT” you must be in AUX or
CAMERA mode.

NOTE: The default adjustment is “0” in PAL mode. Tint is
unavailable for adjustment.

Parameter Adjustment Procedure

1. Enter Picture Quality Setting mode:
Press the PIC button (24) on the remote or press and

hold the WIDE/PICTURE button (2) on the monitor
panel.

2. Select Item to Set:
Press the ( ) ( ) buttons (14, 22) on the remote or
press and hold the ( ) or ( ) buttons (18, 19) on the
monitor panel.

3. Set Parameters:
Press ( ) ( ) buttons (17, 19) on the remote or press
( ) ( ) buttons (16, 17) on the monitor panel.

4. Exit Picture Quality Setting Mode:
Press the PIC button (24) on the remote or press and
hold the WIDE/PICTURE button (2) on the monitor
panel.

Parking Brake Inhibit

• When the “PRK SW” cable is connected to the brake
switch, the display on the TFT monitor will display video
only when the vehicle is parked.

• Parking cable function is overridden when the video
source is set to CAMERA.

• When the parking brake inhibit is on, the front monitor
displays “Parking Is On”, preventing the driver from
watching content while driving. Rear video screens are
not affected.

Monitor Movement Mechanism

If an obstruction occurs in the monitor path, the following
protective measurements can be executed to prevent
damage to the mechanism or monitor:

After the protective procedure is executed, normal operation
is resumed by pressing the OPEN button (2) or disconnecting
and reconnecting the power.

Table 3: Video Output Formats

Playing Source Video Output Format

TUNER RGB Mode
DVD RGB Mode
AUX IN CVBS Mode
CAMERA CVBS Mode

FULL

The entire screen is extended
horizontally to the aspect ratio of 16 to

9. The extension ratio is the same at
any point.

WIDE

The screen is extened horizontally to
the aspect ratio of 16 to 9. The
extension ratio increases toward the
right and left ends of the screen.

NORMAL

The conventional display image has a
4 to 3 ratio of horizontal to vertical,
leaving a blank area on the right and
left sides of the display.

Table 4: Monitor Protective Measures

Obstruction

Self

Protection

OPEN Button

Pressed

Power

Reconnected

Monitor load­ing out hori­zontally

Monitor is auto­matically
loaded into unit

Monitor fully
extended hori­zontally

Monitor is auto­matically
loaded into unit

Monitor load­ing in hori­zontally

Unit stops at
obstruction
point

Monitor fully
extended hori­zontally

Monitor is auto­matically
loaded into unit

Monitor load­ing out verti­cally

Unit stops at
obstruction
point

Monitor swiv­els back to the
unit

Monitor swiv­els back to the
unit

Monitor load­ing in verti­cally

Unit stops at
obstruction
point

Monitor swiv­els back to the
unit

Monitor swiv­els back to the
unit

VM9410

11

OPERATING INSTRUCTIONS

Power On / Off

Press the /MUTE button (1) to turn the unit on. The buttons
on the front of the unit light up and “WELCOME” appears
briefly in the LCD panel (17), followed by the current mode
status. If the TFT screen is open, only the current mode
status is displayed. You can also turn on the unit by pressing
the OPEN button (2) and opening the TFT screen.

Press and hold the /MUTE button (1) on the front panel or
the POWER button (#) on the remote to power off the
unit.The monitor is drawn back into the main compartment
and the LCD screen displays “BYE-BYE”.

Audible Beep Confirmation

An audible beep tone confirms each function selection. The
beep tone cannot be disabled.

Mute

Press the /MUTE button (1) on the front panel or the MUTE
button (3) on the remote to mute the volume from the unit.
Press the MUTE button again to restore the volume. “MUTE”
is displayed on the LCD monitor. Adjusting the volume or
using any of the audio set-up features cancels the mute
function.

Playing Source Selection

Press the SRC/P.MODE button (15) on the front panel or the
SRC button (8) on the remote to change between available

playing sources in the following order: TUNER, DVD, CD
Changer, AUX IN or CAMERA (rear view video camera). The
playing mode is displayed on the TFT and LCD screens.

AUX IN Mode

An external peripheral device can be connected to this unit
via RCA output and “AUX-IN”.

CAMERA Mode

“CAMERA” mode is only available if the camera is connected
and during reverse driving. To install a rear view video
camera, connect the video input cable to the camera output
cable.

Volume Adjustment

To increase or decrease the volume level, turn the ROTARY
ENCODER (6) on the front panel or press the VOL+/ VOL-

buttons (15, 16) on remote control. When the volume level
reaches “0” or “40”, a beep sounds, indicating that the
adjustment limit has been reached. The volume ranges from
“0” to “40”. The LCD or TFT screen displays the volume level
for 3 seconds.

Audio Control Menu

The Audio Control feature allows you to easily adjust your
audio system to meet the acoustical characteristics of your
vehicle, which vary depending on the type of vehicle and its
measurements. To get the best possible sound quality from
your new system, be sure to adjust the settings for the
speakers as well. Proper setting of the Fader and Balance
boosts the effects of the cabin equalizer.

Accessing the Audio Control Menu

Press the VOL/LOC/DX knob (6) on the front panel once to
display the “AUDIO” menu.

Selecting an Audio Feature for Adjustment

Continuously press the VOL/LOC/DX knob (6) on the front
panel, or press the ( )/( ) buttons (14, 22) on the remote
control or the ( )/( ) buttons (18, 19) on the joystick to
select the audio feature to be adjusted.

Adjusting an Audio Feature

Rotate the VOL/LOC/DX knob (6), press the ( )/( )
buttons (17, 19) on the remote control, or press the ( )/( )
buttons (16, 17) on the joystick to adjust the selected feature
to the desired setting.

NOTE: The Bass and Treble levels are only adjustable
when EQ is set to “User” mode.

The Loud function compensates for deficiencies in sound
ranges at low levels. Loudness levels range from 1-4 or “off”.
When the Loud function is on, LOUD is displayed on the
screen.

Exiting the Audio Control Menu

Press and hold the VOL/LOC/DX knob (6) or stop making
adjustments for a few seconds to exit the audio control menu.

Six-Channel Audio Control

NOTE: Before adjusting the volume of any speaker,
please refer to “Surround Setup” on page 19.

Rear Zone

If a monitor is installed in the rear zone and connected to the
rear zone AV output, passengers in the back seat can control
the DVD output using the rear zone remote control. See
“Rear Zone Remote COntrol” on page 9 for instructions.

System Reset

To correct a system halt or other illegal operation, use the tip

of a pen to press the RESET button (22) located on the front
bottom-right corner of the unit. After a system reset, the unit
restores all factory default settings.

NOTE: If the unit is reset while a DVD is playing, the DVD
resumes play once the reset is complete.

Line Mute

If the “MUTE” wire is connected, audio output mutes when a
telephone call is received by the car phone or when verbal
navigation is performed.

Table 5: Audio Adjustments

Audio Function Adjustable Range

EQ User

Flat
Jazz
Pop

Classical
Treble -7 to +7
FADE -7 to +7
BAL -9 to +9
SUB.W -9 to +9
Loud Off, 1-4

Table 6: 6-Channel Audio Adjustments

Item Adjustable Range

Master Volume 00 to 40
Front Left Channel Volume -10 to +10
Front Right Channel Volume -10 to +10
Rear Left Channel Volume -10 to +10
Rear Right Channel Volume -10 to +10
Center Channel Volume -10 to +10
Subwoofer Volume -10 to +10

[RESET] Button

VM9410

12

SYSTEM SETUP MENU

In “System Setup” mode, “ASP CONFIG” and “GENERAL
SETUP” are available for adjustment. Setup can be
performed by pressing the dedicated button on the remote
control or on the front panel. For system settings, press the
SYS SETUP button (31) on the remote control to enter the
“System Setup” menu. “ASP CONFIG” is highlighted in
green.

General Setup Menu

Accessing the General Setup Menu

T o access the “GENERAL SETUP” Menu, press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight “GENERAL SETUP” in green.

Press the button (18) on the remote control to enter the
“GENERAL SETUP” menu. A menu appears with the option
for the first item, “Radio”, highlighted in light blue.

Selecting a Feature for Adjustment

Press the or buttons (14, 22) on the remote control or
the or buttons (18, 19) on the joystick to select the
feature to be adjusted.

Adjusting a Feature

1. Enter the option field for the feature you want to adjust
by pressing the button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19)
on the joystick.

3. Confirm your selection by pressing the , , or
buttons (14, 17, 19) on the remote control, or the or
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.

Adjusting the Clock

Method 1 – TFT screen open:

1. Access the “Clock” setting under the General Setup
menu.

2. Press the or buttons (14, 22) on the remote
control or the or buttons (18, 19) on the joystick to
move the cursor to the “Hour” or “Min” position.

3. Press the , or buttons (17, 19) on the remote
control or the or buttons (16, 17) on the joystick to
adjust the hour or minutes.

4. Press the button (14) on the remote control to confirm
setup.

Method 2 – TFT screen closed:

1. Press and hold the DISP button (5) until the clock
flashes in the LCD display.

1. Press the or buttons (18, 19) on the joystick to
move the cursor to the “Hour” or “Min” position.

2. Press the or buttons (16, 17) on the joystick to
adjust the hour or minutes.

3. Press the DISP button (5) on the unit to confirm setup.

Returning to the System Setup Menu

To return to the System Setup menu, move to , then
press the button on the remote control.

ASP (Audio Sound Processing) Config
Menu

The ASP Config Menu allows you to make fine audio
adjustments.

Accessing the ASP Config Menu

To access the “ASP CONFIG” Menu, press the direction
buttons on the joystick (16, 17, 18, 19) or remote control (14,
17, 18, 19, 22) to highlight “ASP CONFIG” in green. Press
the button (18) on the remote control to enter the “ASP
CONFIG” menu. A menu appears with the option for the first
item, “Bass Center Freq”, highlighted in light blue.

DIRECTION BUTTONS

General Setup

USA1

Table 7: General Setup Menu Features

Setting Options Function

Radio USA1 Select the appropriate setting

based on the country in which you
reside.

USA2
Arabia
China
S-America
Europe

Clock Mode 12H Clock displays 12 hour time using

AM and PM.

24H Clock displays 24 hour time up to

23:59.

TV System Auto The color signal output is switched

automatically based on the current
disc.

NTSC The color signals are output in the

standard NTSC format.

PAL The color signals are output in the

standard PAL format.

TFT Auto
Open

On The TFT panel automatically opens

when the unit is turned on.

Off You must press the OPE N bu tton

(1) to open the TFT panel.

OSD Lan­guage

English The menus are displayed in English

only.

Clock (HH:MM) See “Adjusting the clock” to learn

how to set the clock.
Return to previous menu

VM9410

13

Adjusting a Feature

1. Enter the option field for the feature you want to adjust
by pressing the button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19)
on the joystick.

3. Confirm your selection by pressing the , , or
buttons (14, 17, 19) on the remote control, or the or
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.

Exiting the System Setup Menu

To exit setup mode and resume normal playback, press the
SYS SETUP button (31) on the remote control or the DSP
button (5) on the front panel.

Table 8: ASP Config Menu Features

Setting Options Function

Bass Center
Freq

60Hz According to the audio source, select

the Bass Center Frequency to
achieve the best Bass effect.

80Hz
100Hz
130Hz
150Hz
200Hz

Treble Center
Freq

10KHz According to the audio source, select

the Treble Center Frequency to
achieve the best Treble effect.

12.5KHz
15KHz
17KHz

ASP Config

Sub.W Filter 80Hz Selecting a crossover frequency sets

a cut-off frequency of the subwoofer's
LPF (low-pass filter) and the
“SMALL” speakers' HPF (high-pass
filter). The Crossover frequency set­ting has no effect if the subwoofer is
set to “OFF” and any other speaker is
set to “LARGE”.

120Hz
160Hz

Sub.W Phase 0D Subwoofer output IN phase

180D Subwoofer output OUT OF phase

NOTE: Depending on your installa­tion, reversing the subwoofer phase
may increase Bass output.

Bass Q-Factor 1.0 When the Bass Center Frequency is

selected, adjusting the Bass Q-Fac­tor alters the sharpness of the Bass
output.

1.25

1.5

2.0
Return to previous menu

Table 8: ASP Config Menu Features

Setting Options Function

VM9410

14

TUNER OPERATION

Tuner TFT Display

1. Current Radio Band Indicator

2. Radio Frequency Indicator

3. Clock

4. Stereo Broadcasting Indicator

5. Strong Local Signal Broadcasting Indicator

6. Preset Radio Stations

7. Front Zone Playing Mode

8. Rear Zone Playing Mode

9. User Defined Equalizer Level

10. Loud Setting Indicator

11. Current Preset Station Indicator

Tuner LCD Display

1. Current Radio Band Indicator

2. Radio Frequency Indicator

3. Current Preset Station Indicator

4. Stereo Broadcasting Indicator

5. Strong Local Signal Broadcasting Indicator

Switch to Radio Tuner source

Press the SRC button (15) on the front panel or remote
control (8) to switch to the RADIO TUNER source. The Tuner
TFT or LCD display appears.

Select FM/AM Band

Press the BAND button (14) on the front panel or the remote
control (20) to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.

Auto Tuning

Press and hold the button (19) on remote control or the
button on the joystick (17) to seek the next available radio
station by increasing the tuning frequency. Press the button
again to stop searching.

Press and hold the button (17) on the remote control or
the button on the joystick (16) to seek the next available
radio station by decreasing the tuning frequency. Press the
button again to stop searching.

Seek Tuning

Press the button (19) on remote control or the button on
the joystick (17) to seek the next station higher.

Press the button (17) on the remote control or the
button on the joystick (16) to seek the next station lower.

Manual Tuning

Press the or buttons (14, 22) on the remote control or
the or buttons (18, 19) on the joystick to increase or
decrease the tuning frequency one step.

Using Preset Stations

Six numbered preset buttons store and recall stations for
each band. All six stored stations (P1-P6) for the current
band appear on the TFT screen.

Storing a Station

1. Select a band (if needed), then select a station.

2. Hold a preset button (8-13) for three seconds. The
preset number appears in the LCD panel.

Recalling a Station

1. Select a band (if needed).

2. Press a preset button (8-13) to select the corresponding
stored station.

Auto Store (AS)

Automatic Storing of Preset Stations

To select six strong stations and store them in the current
band:

1. Select a band (if needed).

2. Press AS (26) for > 2 seconds to activate the Auto S tore
function.

The new stations replace stations already stored in that band.

Using Preset Scan

To scan stored stations in the current band:

1. Select a band (if needed).

2. Press AS (26) for < 2 seconds. The unit pauses for 10
seconds at each preset station.

3. Press AS again to stop scanning when the desired
station is reached.

Local Radio Station Seeking (LOC)

When the Local function is on, only radio stations with a
strong radio signal are played. To activate the Local function,

press and hold the LO/DX button (6) on the front panel. Press
LO/DX again to turn Local off. When the Local function is

active, the “LOC” indicator appears lit on the LCD or TFT
screen.

ST

Loc

P1

4 1

1010

11 2

5

7

8 9

3

6

1

2

345

VM9410

15

DVD PLAYER OPERATION

NOTE: When properly installed, DVD video cannot be
displayed on the main TFT screen unless the parking break is
applied. If you attempt to play a DVD while the vehicle is
moving, the TFT screen displays “PARKING” with a blue
background. Rear video screens, if applicable, will operate
normally.

Opening/Closing the TFT Video Screen

Opening the TFT Screen

To open the TFT video screen, press the OPEN (2) button.
The unit beeps and then open.

Closing the TFT Screen

Press the OPEN (2) button again to close the TFT screen. If
the screen is in the “IN” position, it moves out before closing.
Once the TFT screen is closed, the LCD panel displays the
current status.

DVD LCD Display

1. Current Playing Chapter

2. Current Playback Time

3. SC - Scan Playback; RPT - Repeat Playback;
RDM - Random Playback; ALL - Playback All Discs

Insert/Eject Disc

Upon inserting a DVD disc, DVD mode is entered disc play
begins. If the TFT screen is closed, the DVD indicator
appears lit on the LCD screen.

NOTE: If Parental Lock (Rating) is activated and the disc
inserted is not authorized, the 4-digit code must be
entered and/or the disc must be authorized (see
“RATING (Parental Lock) Menu” on page 19).

You cannot insert a disc if there is already a disc in the unit or
if the power is off.

NOTE: DVD-R and DVD-RW will not play unless the
recording session is closed and the DVD is finalized.

Ejecting a Disc

Press the button (21) on the front panel or remote control
(25) to eject the disc. The unit automatically reverts to Tuner

mode. You may eject a disc with the power off and the unit
remains off after the disc is ejected.

Reset the Loading Mechanism

If the disc loads abnormally or an abnormal core mechanism
operation occurs, press and hold the button (21) on the
front panel or remote control (25) to reset the loading
mechanism. Normal operation resumes.

Controlling Playback

Stopping Playback

Press the STOP button (13) on the front panel or the /
BAND button (20) on the remote control to stop DVD play.

Pausing Playback

Press the SRC button (15) on the front panel or the button
on the remote control (18) to suspend or resume disc play.

Slow Motion Playback

Press the button (22) on the remote control or the
button (19) on the joystick to play the current title in slow
motion at 1/2, 1/4, 1/6 or 1/7, the normal speed. Press
(18) to resume normal play. Continue pressing the or
button to slow reverse.

Repeat Playback

Press the 4/REP button (11) on front panel or the REPT
button (7) on remote control to alter repeat mode according to
the following:

• DVD: Repeat Title, Repeat Chapter, Repeat Off

• VCD (PBC Off): Repeat Single, Repeat Off

NOTE: For VCD play, the repeat function is not available
if PBC is on.

Sectional Repeat Function (A-B)

Use the A-B function to define a specific area of a disc to
repeat.

• Press the REPT A-B button (6) on the remote control to
set the start point (A) of the repeated section.

• Press the REPT A-B button again once you reach the
desired end point (B) of the repeated section. The
selected portion of the DVD will now repeat
continuously.

• Press the REPT A-B button again to cancel the A-B
section setting and stop repeat play.

Random Playback

With a DVD, VCD, or CD playing, press the 5/RDM button
(12) on the front panel or the RDM button (33) on the remote

control to activate random playback and play all chapters/
tracks in random order. “Shuffle On” appears on the screen.

Press the button (19) on the remote control or the
button on the joystick (17) to play the next random track.

Press the RDM button again to turn random play off. “Shuffle
Off” appears on the screen.

NOTE: When a VCD is playing with PBC turned “On”,
activating random playback automatically turns PBC off.

Accessing the DVD Menu

Press the MENU button (1) on the remote control to recall the
main DVD menu. Use the directional (arrow) buttons ( , ,
& ) on the joystick (16, 17, 18, 19) to select a title from the
menu.

Press the TITLE button (2) on the remote control to select a
different title for playback.

Press the button (18) on the remote control or the ENTER
(joystick) button (20) to confirm your selection and begin
playback.

Moving Through Chapters

Press the button (19) on the remote control or the
button on the joystick (17) to advance to the next chapter on
the DVD.

Press the button (17) on the remote control or the
button on the joystick (16) to move to the previous chapter.

Fast Forward/Fast Reverse

Press the button (14) on the remote control or the
button (18) on the joystick to fast forward. Keep pressing and
releasing the button to increase the rate from “2X” to “4X”,

“8X”, and “20X”. Continue pressing the or button to
fast reverse.

Scanning

Press the AS button (26) to play the first ten seconds of each
chapter. Press AS again to stop the scan function and play
the current chapter.

Alternating Between 2-Channel and 6­Channel Mode

Press and hold the 5/2-6CH button (12) on the front panel to
switch between 2-channel (DownMix Mode) and 6-channel
(Full 6CH Mode) speaker output. 2-Channel audio is for CD
and MP3 playback, while 6-Channel audio is for DVD

1

2

3

VM9410

16

playback. Depending upon the channel selected and your
speaker setup, the audio output varies according to the
following table.

NOTE: The information in the above table is valid only
when the setup values for “Front Speaker”, “Center
Speaker”, and “Surround Speaker” are set to “low”.

Goto Search

During DVD or VCD playback, perform the following steps to
use the GOTO feature to access a specific location on a disc:

1. Press the GOTO button (21) on remote control to enter
“GO TO” mode.

2. Press the or buttons (14, 22) on the remote
control or the or buttons (18, 19) on the joystick to
select a category (highlighted in blue).

• For DVD mode, you can choose Time or Title/

Chapter search.

• For VCD mode, press the GOTO button to choose
between Track Search, Disc Search and Exit.

3. Enter a time into the field using the numeric keypad (29)
on the remote control.

4. Press the button (18) on the remote control or the
ENTER (joystick) button (20) to go to the specified
location on the disc.

5. Press the GOTO button again to exit.

Direct Chapter / Track Selection

During DVD, VCD and CD
playback, you can use the numeric
keypad on the remote control (29)
to access a track directly.

Viewing an Alternate
Picture Angle (DVD
Only)

Some DVDs contain scenes that have been shot
simultaneously from different angles. For discs recorded with
multiple angles, press the ANGLE button (13) on the remote
control to toggle available angles of the on-screen image.

Zooming

Press the ZOOM button (23) on the remote control to enlarge
and pan through the video image using the following options:
“Q1”, “Q2”, “Q3”, and “OFF”.

Multi-Language Discs (DVD Only)

Changing Audio Language

If you are watching a disc recorded in multiple languages,
press the AUDIO button (5) on the remote control to choose
a language.

Changing Subtitle Language

If you are watching a disc recorded in multiple languages with
subtitles, press the SUBTITLE button (9) on the remote

control to choose the language in which you would like the
subtitles to appear.

NOTE: During VCD playback, press the AUDIO button (5)
on the remote control to choose between Left Channel,
Right Channel, and Stereo.

PBC (Play back Control) (VCD Only)

For VCDs with play back functionality, play back control
(PBC) provides additional controls for VCD playback.

Press the MENU button (1) on remote control to toggle the
PBC function “On”/”Off”. Once PBC is on, playback starts
from track one of the play list.

NOTE: When PBC is activated, fast forward, slow
playback, and previous/next track are available. Repeat
and direct track selection are not available.

When PBC is activated, selecting random, scan, or search
playback automatically deactivates PBC.

Playback Information

During DVD and VCD playback, press the DISP button (10)
on remote control to display playback information on the
screen including the media playing and current playback
time.

DVD Playback Information

The following information is displayed at the top of the screen
during DVD playback:

• T : 5/8 – “5 / 8" indicates the fifth of 8 titles on the DVD is
currently playing.

• C : 2/16 – “2 / 16" indicates the second of 16 titles on the
DVD is currently playing.

• 00:41:28 – “00:41:28” indicates the playback time of the
current title.

• 2 / 6 Eng – The language display information
indicates the second language out of 6 (English) is
currently being used.

The following information appears at the bottom of the screen
during DVD playback:

• Front: DVD – “DVD” is the current playing source for the
front zone.

Table 9: Speaker Output Options

Speaker Setup

Front

Spkr

Rear

Spkr

Center

Spkr

Sub-

Woofer

2CH mode X X
Play 2CH audio in

6CH mode with Sur­round “Off”

X

Play 2CH audio in
6CH mode with Sur­round “On”

XXX X

Play 6CH audio in
6CH mode

XXX X

DVD Search

Time – Go to specific
time in current title

Title/Chapter – Go to
specific time in a
chapter

VCD Track Search

Time – Go to specific
time in the current track

Track – Go to specific
track

VCD Disc Search

Time – Go to specific
time on disc

Track – Go to specific
track

DVD AUX IN S URR 1 DSP

VM9410

17

• Rear: AUX IN – “AUX IN” is the current playing source
for the rear zone.
“Surround” is the current playback audio encoding
system.
“DSP” indicates Digital Signal Processing.

VCD Playback Information

The following information is displayed at the top of the screen
during VCD playback:

• VCD2.0 – Format of current disc.

• T: 6/18 – “6/18” indicates the sixth of 18 tracks on the
VCD is currently playing.

• 00:02:18 – “00:02:18” indicates the playback time of the
current track.

The following information appears at the bottom of the screen
during VCD playback in 6-Channel mode:

• Front: DVD – “DVD” is the current playing source for the
front zone.

• Rear: AUX IN – “AUX IN” is the current playing source
for the rear zone.
“MPEG” is the decoding method in use.
“DSP” indicates Digital Signal Processing.

The following information appears at the bottom of the screen
during VCD playback in 2-Channel mode:

• Front: DVD – “DVD” is the current playing source for the
front zone.

• Rear: AUX IN – “AUX IN” is the current playing source
for the rear zone.

• EQ:FLAT – The equalizer setting is FLAT.

• Loud: Level 1 – The Loud option is set to Level 1
loudness.

General Disc Information

DVD AUX IN MPEG DSP

Table 10: Disc Properties

Symbol 12cm Disc Properties Max Play Time

Single side single layer (DVD-5)
Single side double layer (DVD-9)
Double side single layer (DVD-10)
Double side double layer (DVD-18)

(MPEG 2 Method)

133 minutes
242 minutes
266 minutes
484 minutes

Single side single layer (VCD)

(MPEG 1 Method)

74 minutes

Single side single layer 74 minutes

Table 11: Disc Symbols

Symbol Meaning

Number of voice languages recorded. The num­ber inside the icon indicates the number lan­guages on the disc (maximum of 8).

Number of subtitle languages available on the
disc (maximum of 32).

Number of angles provided (maximum of 9).

Aspect ratios available. “LB” stands for Letter Box
and “PS” stands for Pan/Scan. In the example on
the left, the 16:9 video can be converted to Letter
Box video.

Indicates the region code where the disc can be
played.

• Region 1: USA, Canada, East Pacific Ocean
Islands

• Region 2: Japan, Western Europe, Northern
Europe, Egypt, South Africa, Middle East

• Region 3: Taiwan, Hong Kong, South Korea,
Thailand, Indonesia, South-East Asia

• Region 4: Australia, New Zealand, Middle and
South America, South Pacific Ocean Islands/
Oceania

• Region 5: Russia, Mongolia, India, Middle
Asia, Eastern Europe, North Korea, North
Africa, North-West Asia

• Region 6: Mainland China

• ALL: All regions

VM9410

18

DVD SETUP MENU

In “DVD Setup” mode, “LANGUAGE”, “VIDEO”, “AUDIO”,
“SURR SETUP”, and “RATING” (parental lock) are available
for setup. This operation can be performed using the remote
control or joystick controls.

Accessing the DVD Setup Screen

For system settings, press the DVD SETUP button (31) on
the remote control to enter the “DVD Setup” menu.
“LANGUAGE” is highlighted in green.

NOTE: Once the DVD setup is complete, the settings are
memorized. To return to the factory default settings,
press the RESET button (22) on the front panel.

Accessing a Menu

To access a menu (LANGUAGE, VIDEO, AUDIO, SURR
SET-UP, or RATING), press the direction buttons on the
joystick (16, 17, 18, 19) or remote control (14, 17, 18, 19, 22)
to highlight the desired menu in green.

Selecting a Feature for Adjustment

Once inside a menu, press the or buttons (14, 22) on
the remote control or the or buttons (18, 19) on the
joystick to select the feature to be adjusted.

Adjusting a Feature

1. Enter the option field for the feature you want to adjust
by pressing the button (18) on the remote or by
pressing the ENTER (joystick) button (20) on the unit. A
submenu appears in a second row with the selected
option highlighted in light blue.

2. Select a new value by pressing the or buttons (14,

22) on the remote control or the or buttons (18, 19)
on the joystick.

3. Confirm your selection by pressing the , , or
buttons (14, 17, 19) on the remote control, or the or
button (16, 17) on the joystick. The new value is
highlighted in light blue and setup is complete.

LANGUAGE Menu

If a DVD supports more than 1 Subtitle or Audio language, all
the languages are available for selection during playback. If
the selected language is not supported by the DVD, then the
default language is used. During playback, press the
SUBTITLE (9) or AUDIO (5) button on the remote control to
change the language directly. This will not effect the DVD
menu settings.

VIDEO Menu

NOTE: For standard discs not formatted for
“widescreen”, use of the 16:9 aspect ratio will result in
image distortion.

AUDIO Menu

The VM9410 has a built-in Pink Noise generator to help set
the relative speaker levels for multi-channel audio playback.

LANGUAGE VIDEO AUDIO

SURR SETUP

RATING

DVD-Setup

Table 12: LANGUAGE Menu Features

Setting Options Function

Subtitle English Select the default language in which

you would like subtitles (if applicable) to
be displayed

Chinese
Auto
Off

Audio English Select the default language in which

you would like audio (when optional) to
be played

Chinese

DVD Menu English Select the default language in which

you would like the DVD menu (if appli­cable) to be displayed

Chinese

Return to previous menu

Table 13: VIDEO Menu Features

Setting Options Function

TV Shape
(Aspect
Ratio)

4:3 PS With 16:9 display, the left and right sides

are cut off

4:3 LB With 16:9 display, the top and bottom are

cut off

16:9 Image is presented in wide view with a

16:9 aspect ratio

Angle
Mark

On Angle indicator (if applicable) is shown
Off Angle indicator is not shown

Return to previous menu

Table 14: AUDIO Menu Features

Setting Options Function

Pink
Noise

Off Stop output of pink noise
Left Left channel pink noise
Center Center channel pink noise
Right Right channel pink noise
Left Surr Left surround channel pink noise
Right Surr Right surround channel pink noise
Subwoofer Subwoofer pink noise

DRC Off Employ the Dynamic Range Control for

better playback for low volumes.

On

Surround
Mode

Off
Surround I Use to decode surround effects from

analog or digital 2-channel down­mixed sources.

Surround II Use to decode surround effects from

digital bit-stream movies.

SURR Matrix Apply matrixed effects to mono

sources.

SURR Movie Apply enhanced movie surround

effects.

SURR Music Apply surround music effects.

CNTR
CTRL

5ms Adjust the time difference between the

center and front speakers to create a
time delay between 1 and 5 millisec­onds, producing a more accurate audio
effect.

4ms
3ms
2ms
1ms
0ms

VM9410

19

SURROUND SETUP Menu

To change speaker settings for 2-channel mode, use the
or buttons (14, 22) on the remote control or the or
buttons (18, 19) on the joystick to select “Stereo”. To change
speaker settings for 6-channel mode, select “Multi-CH”.

After

selecting 2 or 6-channel mode, use the button (19) on
remote control or the button on the joystick (17) to move to
the speaker settings on the right. Refer to Table15 when
selecting speaker options for each mode.

RATING (Parental Lock) Menu

The DVD system has a built-in parental lock feature to
prevent unauthorized persons from viewing restricted disc
content. By default, the rating system is unlocked. Once
setup, the parental lock is released only by entering the
correct password. Once the password is entered, rating is
available for setup.

To reset the password, enter the “RATING” menu and enter
the current password. Once the correct password is entered,
you can access the “Password” field and enter a new one.

NOTE: Record the password and keep it in a safe place
for future reference. The rating for each disc is marked
on the disc, disc packing, or documentation. If the rating
is not available on the disc, the parental lock feature is
unavailable. Some discs restrict only portions of the disc
and the appropriate content will play. For details, please
refer to the disc description.

REAR
CTRL

15ms Adjust the time difference between the

rear and front speakers to create a
time delay between 3 and 15 millisec­onds, producing a more accurate audio
effect.

12ms
9ms
6ms
3ms
0ms

Return to previous menu

Table 15: SURROUND SETUP Menu Features

Setting Options Function

FL (Front Left) /
FR (Front Right)

Large Use when front speakers have

good bass output

Small Use when speakers do not have

good bass output

Table 14: AUDIO Menu Features

Setting Options Function

DSP

ASP

SUB

CTR

RR

RL

FR

FL

SURROUND SETUP

Multi-CH

Stereo

LR (Left Rear) /
RR (Right Rear)

Large Use when rear speakers have

good bass output

Small Use when rear speakers do not

have good bass output

None Use when rear speakers are not

present

SUB (Subwoofer) Present Use when subwoofer is present

None Use when subwoofer is not

present

CTR (Center) Large Use when center sp ea ke r ha s

good bass output

Small Use when center speaker does

not have good bass output

None Use when center spea ke r is n ot

present
Return to previous menu

Table 16: RATING Menu Features

Setting Options Function

Password _ _ _ _ Enter a 4-digit password to acti-

vate the “Rating” feature

Rating 1. Kid Safe Select the appropriate rating level

for the intended audience
You may override higher ratings

by using your password

2. G

3. PG

4. PG-13

5. PG-R

6. R

7. NC-17

8. Adult

Load Factory Reset Select “Reset” to restore the fac-

tory default settings for the Rating

system only

Return to previous menu

Table 15: SURROUND SETUP Menu Features

Setting Options Function

VM9410

20

CD PLAYER/CHANGER OPERATION

Instructions for Insert/Eject, Play/Pause, Stopping Playback,
Track Selection, Fast Forward/Fast Reverse, Scan, and

Random Play

are the same for DVD, CD, CD Changer and

MP3 operation. Please see the DVD Player Operation
section for information about these topics.

NOTE: Upon inserting a disc with the TFT screen open,
the disc and track title (if available), along with the track
number and playing time appear on the screen.

NOTE: CD-R and CD-RW will not play unless the
recording session is closed.

MP3/WMA Operation

This player allows you to playback MP3 files recorded on CD­ROM, CD-R, and CD-RW. For CD-RW discs, please make
sure it is formatted using the full method and not the quick
method to prevent illegal disc operation.

MP3 Format Compatibility

The file naming formats listed below are compatible with this
unit:

• ISO 9660 – file name: 12 characters, file extension: 3
characters

• ISO 9660 – file name: 31 characters, file extension: 3
characters

• Joliet – 64 characters

If the file or folder name does not conform to ISO 9660 file
system standards, it may not be displayed or played back
correctly.

Use the following settings when compressing audio data for
your MP3 disc:

• Transfer Bit Rate: 320kbps

• Sampling Frequency: 48kHz

When recording MP3 up to the maximum disc capacity,
disable additional writing. For recording on an empty disc up
to maximum disc capacity, use the "Disc at once" setting.

Playing MP3/WMA Files

After inserting a MP3/WMA disc, files will play in the
sequence of the “Root’ directory.

Use the numeric keypad (29) on the remote control to access
files directly.

Selecting a Playback Mode

1. Press the STOP button (13) on the front panel or the /
BAND button (20) on the remote control to stop disc

play.

2. Press the button (19) on the remote control or the
button on the joystick (17) to enter playback mode
(PLAY MOD).

3. Press the , , or buttons (18, 17, 19) on the
remote control, or the or button (16, 17) on the
joystick to choose from the following playback options:

4. Press the button (14) on the remote control to
confirm the playback mode then press the button (18)
to begin playback.

CD Changer Operation

This unit is capable of operating a SANYO CD changer.
Please use the remote control supplied with your changer
when the changer is in use.

NOTE: The Scan, Random, and Repeat features are not
available in CD Changer mode.

Accessing CD Changer Mode

Once the CD changer is properly connected, press the SRC
button (15) on the front panel or remote control (8) to switch
to CD Changer mode.

Random Playback

With a CD playing, press the 5/RDM button (12) on the front
panel or the RDM button (33) on the remote control to

activate random playback and play all tracks in random order.
“Shuffle On” appears on the screen.

Press the 5/RDM button again to randomly play all the discs.
The "RDM" and "ALL" indicators appear lit on the display.

Press the button (19) on the remote control or the
button on the joystick (17) to play the next random track.

Press the RDM button again to turn random play off. “Shuffle
Off” appears on the screen.

Moving Through Discs

Press the DISC button (12) on the remote control or the 1/
DISC- button (8) on the front panel to move to the previous

disc.
Press the DISC button (11) on the remote control or the 2/

DISC+ button (9) on the front panel to move to the next disc.

Table 17: MP3/WMA Playback Modes

Play Mode Playback Details

Disc Normal Playback all files on the disc

and stop at the end

Disc Repeat Repeat playback of all files on

the disc

Shuffle Randomly play all files and stop

at the end
Single Track Play a specific file and stop
Repeat Track Repeat playback of a specific

file
Folder Normal Play all files in a folder and stop

at the end
Folder Repeat Repeat playback of all files in a

folder/directory

VM9410

21

TROUBLESHOOTING

Table 18: Troubleshooting

Problem Cause Corrective Action

GENERAL

Unit will not power on Radio Fuse blown Install new fuse with correct rating

Car battery fuse blown Install new fuse with correct rating
Illegal operation Press the RESET button located in the bottom right corner of the front panel

Remote control does not function Battery depleted Replace battery with new one

Battery installed incorrectly Remove battery and install correctly

No/low audio output Improper audio output connection Check wiring and correct

Volume set too low Increase volume level
Improper “MUTE” connection Review wiring diagram and check “MUTE” connection
Speakers damaged Replace speakers
Heavily biased volume balance Adjust the channel balance to the center position
Speaker wiring is in contact with metal part of car Insulate all speaker wiring connections

Poor sound quality or distortion Pirated disc is in use Use original copy

Speaker power rating not compatible with unit Connect proper speakers

Speaker is shorted Check speaker contact
Tel-Mute malfunction “MUTE” wire is grounded Check that “MUTE” connection is not grounded and that it’s properly insulated
Unit resets itself when engine is off Incorrect connection between ACC and positive battery

wire

Check wiring and correct

TFT MONITOR

Monitor does not open automatically TFT Auto Open is turned off Turn TFT Auto Open on
No image Incorrect connection to parking brake wire Check wiring and correct

PRK SW is activated and parking brake is not engaged Stop vehicle is safe place and apply parking brake
Flashing image or interference appears on screen DVD is not compatible with current TV system settings Change setup to accommodate disc

Improper video signal connections Check wiring and correct
Prolonged image or improper height/width ratio dis-

play

Improper aspect ratio setup Use correct aspect ratio setting

Monitor stops at incorrect position Moving path is blocked Press OPEN key to restart monitor movement

TUNER

Weak station searching Auto antenna is not fully extended Connect the auto antenna control cable properly

Auto antenna not properly connected Connect the auto antenna control cable properly

LOCAL function is activated Turn LOCAL function off
Cannot insert disc Disc already inside unit Eject current disc and insert new one

VM9410

22

Error Messages

Care and Maintenance

1. Use only a clean silicone cloth and neutral detergent to
clean the front panel or monitor. A rough cloth and non­neutral detergent (such as alcohol) may result in
scratching or discoloration.

2. Do not get water or cleaning fluids on the unit.

3. If the temperature inside the player gets too hot, a
protective circuit automatically stops play of the disc. If
this occurs, allow the unit to cool before operating the
player again.

4. Never insert anything other than a 5” (12 cm) compact
disc into the player as the mechanism can be damaged
by foreign objects.

5. Do not attempt to use a 3” (8 cm) CD-Single disc in this
unit, either with or without an adaptor, as damage to the
player and/or disc may occur. Such damage is not
covered by the Warranty on this product.

6. The CD player may not operate properly in extreme hot
or cold. If such conditions occur, allow the interior of the

vehicle to reach a normal temperature before using
player.

7. When the vehicle warms up during cold weather or
under damp conditions, condensation may appear on
the LCD panel. Should this occur, the screen will not
operate properly until the moisture has evaporated.

8. We suggest you use a cleaning disc in this unit more
frequently than in the unit in your home due to the
environmental conditions of the vehicle.

Disc does not play back Disc is warped or scratched Use disc in good condition

Disc is dirty or wet Clean disc with soft cloth
Laser pickup is dirty Clean laser pickup with cleaning disc
Incompatible disc is used Use compatible disc
Disc rating exceeds Parental Lock rating limit Change Parental Lock settings to lower restriction
Disc region code is not compatible with unit Use disc with proper region code

Disc is inserted upside down Insert disc with label side up
Image blurred, distorted, or dark Disc is illegally copied Use original disc
PBC cannot be used during VCD playback PCB is not available on the disc
No repeat or searching while playing VCD PCB is on Turn PCB off

MP3

Interruption occurred during playback Disc is dirty or scratched Clean disc or replace

File is damaged/bad recording Recreat e disc with good files
Incorrect playback message displayed Message is longer than LCD can display

Table 18: Troubleshooting

Problem Cause Corrective Action

Table 19: Error Messages

Message Displayed Cause Corrective Action

Loading Disc is being read
No Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up

Disc not present in loading compartment Insert disc
Bad Disc Disc is dirty Clean disc with soft cloth

Disc is upside down Insert disc with label side up
Unknown disc Disc format is not compatible with this unit
Region Error DVD is not compatible with region code of unit
Error illegal mechanism operation Press EJECT key for 5 seconds to reset loading mechanism

VM9410

23

SPECIFICATIONS

CEA Power Ratings

Power Output: 13 watts RMS X 4 channels into 4-ohms @ <
1% THD+N
Signal to Noise Ratio: 70dBA below reference. (Reference:
1 watt, 4-ohms)

Dynamic Power: 64 watts into 4-ohms, all channels driven
Frequency Response: 20Hz to 20kHz, -3dB. Aux input used

as source reference
Reference Supply Voltage: 14.4VDC

DVD/CD Player

Compatible Formats: DVD-R, DVD-RW, DVD+R, DVD+R W ,
CD-R, CD-RW, CD-DA, MP3, WMA, SVCD, VCD and Kodak
Picture CD (JPEG)
Signal to Noise Ratio: >

95dBA

Dynamic Range: >95dB
Frequency Response: 20Hz to 20kHz, -3dB
Channel Separation: > 60dB @ 1kHz
D/A Converter(s): 6-channel high performance 24-bit,

192kHz, multi-bit Sigma-Delta modulator. Supports sample
rates from 8~192kHz.
Electronic Skip Protection (ESP): 16Mbit high-speed flash
memory

Video

Format: NTSC, PAL (auto-detection)
Output: 1Vp-p (75-ohm)
Input: 1Vp-p (75-ohm)

FM Tuner

Tuning Range: 87.5MHz - 107.9MHz
Mono Sensitivity (-30dB): 9dBf
Quieting Sensitivity (-50dB): 15dBf
Alternate Channel Selectivity: 70dB
Signal to Noise Ratio @ 1kHz: 58dB
Image Rejection: 80dB
Stereo Separation @ 1kHz: >30dB

Frequency Response: 30Hz - 15kHz, -3dB

AM Tuner

Tuning Range: 530kHz - 1720kHz
Sensitivity (-20dB): 30uV
Signal to Noise Ratio @ 1kHz: 50dB
Image Rejection: 60dB
Frequency Response: 50Hz - 2kHz, -3dB

Monitor

Screen Size: 7.0" (Measured diagonally), 16:9 Widescreen

• 6.06" (154.1mm) W X 3.42" (87mm) H

Screen Type: TFT Liquid Crystal Display (LCD) active matrix
Response Time: 30mSec rise time, 50mSec fall time
Resolution:

• DVD/Composite Video in: 336,960 sub pixels,
1440 (W) X 234 (H)

Viewing angle:

• 65 degrees left or right

• 40 degrees up

• 65 degrees down

General

Auxiliary Input impedance: 10k
Power Supply: 11 to 16VDC, negative ground
Fuse: 10-amp, mini ATM type
DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x

50mm)

** Specifications subject to change without notice.

12-MONTH LIMITED
WARRANTY

AUDIOVOX CORPORATION (the Company) warrants to the
original retail purchaser of this product that should this
product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within 12
months from the date of original purchase, such defect(s) will
be repaired or replaced with new or reconditioned product (at
the Company's option) without charge for parts and repair
labor. To obtain repair or replacement within the terms of this
Warranty, the product is to be delivered with proof of warranty
coverage (e.g. dated bill of sale), specification of defect(s),
transportation prepaid, to the warranty center at the address
shown below.

This Warranty does not extend to the elimination of car static
or motor noise, to correction of antenna problems, to costs
incurred for installation, removal, or reinstallation of the
product, or damage to tapes, compact discs, accessories or
vehicle electrical systems. This Warranty does not apply to

any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident,
or by removal or defacement of the factory serial number/bar
code label(s) or markings. THE EXTENT OF THE
COMPANY'S LIABILITY UNDER THIS WARRANTY IS
LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED
ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S
LIABILITY EXCEED THE PURCHASE PRICE PAID BY
PURCHASER FOR THE PRODUCT.

This Warranty is in lieu of all other express warranties or
liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE
LIMITED TO THE DURATION OF THIS WRITTEN
WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT
WITHIN A PERIOD OF 30 MONTHS FROM DATE OF
ORIGINAL PURCHASE. IN NO CASE SHALL THE
COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR
INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED,
WHATSOEVER. No person or representative is authorized to
assume for the Company any liability other than expressed
herein in connection with the sale of this product.

Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damage so the above limitations or exclusions
may not apply to you. This Warranty gives you specific legal
rights and you may also have other rights which vary from
state to state.

U.S.A: Audiovox Corporation, 150 Marcus Blvd., Hauppauge,
NY 11788, 1-800-323-4815
CANADA: Call 1-800-323-4815 for location of warranty
station serving your area.

Audiovox Electronics Corporation

150 Marcus Boulevard

Hauppauge, NY 11788

Technical Assistance: 1-800-323-4815

www.jensen.com

© 2005 Audiovox

v.022805